☆ 4.7 Article

S-Scheme Heterostructured CdS/g-C3N4 Nanocatalysts for Piezo-Photocatalytic Synthesis of H2O2

ACS APPLIED NANO MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Graphitic Carbon Nitride Based Materials Towards Photoproduction of H2O2

Hoai-Thanh Vuong et al.

Summary: Hydrogen peroxide plays a crucial role as an essential chemical, but its synthetic process poses severe environmental and health issues. Solar H2O2 production using graphitic carbon nitride (g-C3N4) holds promise in mitigating such problems. However, there are still challenges in engineering g-C3N4 for efficient catalytic results, and the mechanisms of H2O2 production with these materials remain unclear. Therefore, this literature survey reviews the production of H2O2 using g-C3N4-based materials, discussing key aspects and current challenges in photocatalytic H2O2 generation, aiming to provide insights for overcoming barriers and developing sustainable H2O2 production methods.

CHEMPHOTOCHEM (2023)

Add to Collection
Article Nanoscience & Nanotechnology

Defect Engineering of Porous g-C3N4 to Add Multifunctional Groups for Enhanced Production of H2O2 via Piezo-Photocatalysis

Hoai-Thanh Vuong et al.

Summary: Hydrogen peroxide (H2O2) is globally recognized as an essential chemical, but its synthesis through the anthraquinone oxidation process poses environmental and health risks. Thus, there is a need for green and sustainable methods to produce H2O2. This study demonstrates a simple and efficient approach using modified graphitic carbon nitride catalysts, which significantly enhance catalytic activities and produce a large amount of H2O2.

ACS APPLIED NANO MATERIALS (2023)

Add to Collection
Article Nanoscience & Nanotechnology

Nanoarchitecture Manipulation by Polycondensation on KCl Crystals toward Crystalline Lamellar Carbon Nitride for Efficient H2O2 Photoproduction

Zhenchun Yang et al.

Summary: By incorporating K+ into ordered heptazine/triazine units through polycondensation of small molecules on the KCl crystal surface, a crystalline carbon nitride framework (CNK) with extended periodicity of stacking layers is formed, showing enhanced photon absorption and attenuated emissive decay of excitons. The CNK frameworks exhibit remarkable performance in the photocatalytic selective oxygen reduction reaction for hydrogen peroxide production, with a reaction rate of 26.7 mmol h-1 g-1 and a high apparent quantum yield of 25.0%, 23.5 times higher than the counterpart synthesized without KCl. This method is generally applicable to all precursors for carbon nitride synthesis.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection
Article Engineering, Environmental

Unravelling the role of reactive oxygen species in ultrathin Z-scheme heterojunction with surface zinc vacancies for photocatalytic H2O2 generation and CTC degradation

Hui-Yun Liu et al.

Summary: A dual pathway was designed to improve the formation of reactive oxygen species (ROS) in photocatalytic reactions by establishing ultrathin 2D/2D Z-scheme heterojunction and defect engineering in a composite material. The results showed that by spatially separating the charge-carriers through different work functions and ultrathin 2D/2D interface, the charge-transfer efficiency was increased from 42.05% to 59.93%. This led to improved molecular oxygen activation capacity and higher ROS generation. The composite material exhibited optimal removal efficiency of chlortetracycline hydrochloride (CTC) and hydrogen peroxide (H2O2) yield under visible light irradiation.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection
Article Energy & Fuels

Active site modulation of porous g-C3N4 nanofragment via defect assemblage for enhancing visible-light driven hydrogen evolution

Chengwu Yang et al.

Summary: By introducing cyano group and carbonyl group into the apex of heptazine unit, we have successfully designed and synthesized a modified g-C3N4 material, which addresses the issues of poor light utilization and charge separation, and enhances photocatalytic hydrogen performance. The defect assemblage in g-C3N4 attracts photo-charge from other parts of heptazine unit and serves as active sites in photocatalytic process. The modified g-C3N4 material shows a ten times higher photocatalytic hydrogen amount than the pristine one, with apparent quantum efficiencies of 32.30% and 17.94% under 405 and 420 nm, respectively. This study reveals the potential of synergistic effect of different defects in enhancing photocatalytic performance and provides a new approach for defect engineering in photocatalysis.

FUEL (2023)

Add to Collection
Article Chemistry, Physical

S-Scheme Heterojunction Photocatalysts for H2O2 Production

Linxi Wang et al.

Summary: Photocatalysis provides a low-cost, clean and sustainable process for H2O2 production, but electron-hole recombination and slow reaction kinetics hinder its practical application. The solution lies in constructing S-scheme heterojunctions to enhance carrier separation and boost redox power. This Perspective summarizes recent advances in S-scheme photocatalysts for H2O2 production, including building heterojunctions, H2O2-production performance, and photocatalytic mechanisms. Future research directions and strategies to improve H2O2 yields are suggested.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2023)

Add to Collection
Article Nanoscience & Nanotechnology

Internal Interactions within the Complex Type-II Heterojunction of a Graphitic Carbon Nitride/Black Phosphorus Hybrid Decorated with Graphene Quantum Dots: Implications for Photooxidation Performance

Zafer Eroglu et al.

Summary: In this study, Fermi levels of graphitic carbon nitride (CN), black phosphorus (BP), and graphene quantum dots (GQDs) were combined and tuned through band engineering. Various techniques were used to characterize the resulting heterojunction and understand its structure-activity relationship. The superior degradation efficiency of GQDs@CNBP in removing organic pollutants was attributed to the strong coupling at the interfaces and the generation of oxidative species.

ACS APPLIED NANO MATERIALS (2023)

Add to Collection
Article Chemistry, Physical

Unraveling the dual defect effects in C3N5 for piezo-photocatalytic degradation and H2O2 generation

Cheng Fu et al.

Summary: An efficient piezo-photocatalyst (C3N5-x-CN) with enhanced piezo-photocatalytic performance was fabricated by introducing cyano groups and N vacancies into C3N5. The addition of dual-defect sites in C3N5 created an active catalytic surface, increasing the piezoelectricity and promoting carrier separation, resulting in improved piezo-photocatalytic performance. The system showed efficient removal of tetracycline and production of H2O2 under piezo-photocatalytic treatment.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection
Article Nanoscience & Nanotechnology

In2O3 Nanoparticle/Bi4O5Br2 Nanosheet S-Scheme Heterojunctions with Interfacial Oxygen Vacancies for Photocatalytic Degradation of Tetracycline

Xi Zhang et al.

Summary: The construction of In2O3 nanoparticle/Bi4O5Br2 nanosheet S-scheme heterojunction with interface oxygen vacancies (OVs) was achieved in this study using a hydrothermal-calcination approach and a simple chemical precipitation process. The composite exhibited enhanced photocatalytic degradation efficiency for tetracycline hydrochloride (TCH) under simulated sunlight, with a degradation rate of 92.4%, significantly higher than that of pure Bi4O5Br2 (50.2%) and In2O3 (28.6%). The synergistic effect of S-scheme heterojunctions and interface OVs accelerated the complexation of unwanted electrons and holes, contributing to the high removal efficiency. Furthermore, the presence of abundant OVs in the composite promoted the adsorption of O-2 and the generation of superoxide radicals.

ACS APPLIED NANO MATERIALS (2023)

Add to Collection
Review Chemistry, Multidisciplinary

Emerging S-Scheme Photocatalyst

Liuyang Zhang et al.

Summary: This article presents the superiority and design criteria of the emerging S-scheme heterojunction in photocatalysis. By overcoming the challenges faced by single photocatalysts through the construction of heterojunctions, the S-scheme heterojunction has demonstrated its potential in improving photocatalysis. The critical understanding of the curved Fermi level in the S-scheme heterojunction interface and the current challenges and prospects of S-scheme heterojunction photocatalysts are also discussed.

ADVANCED MATERIALS (2022)

Add to Collection
Article Engineering, Environmental

Bifunctional template-mediated synthesis of porous ordered g-C3N4 decorated with potassium and cyano groups for effective photocatalytic H2O2 evolution from dual-electron O2 reduction

Yuan Pan et al.

Summary: A modified photocatalyst with cyanide defects and potassium intercalation has been developed for efficient production of H2O2, demonstrating significantly higher yield and energy conversion efficiency compared to traditional catalysts. The study deepens the understanding of O-2 reduction mechanism and points out promising directions for future design of novel photocatalysts for energy conversion and environmental applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Green & Sustainable Science & Technology

EPR Investigation on Electron Transfer of 2D/3D g-C3N4/ZnO S-Scheme Heterojunction for Enhanced CO2 Photoreduction

Mahmoud Sayed et al.

Summary: The study fabricated a robust S-scheme heterojunction that enhances the efficiency of CO2 photocatalytic conversion. This heterojunction is composed of 3D ZnO hollow spheres wrapped by 2D g-C3N4 layers. The photocatalyst showed a significantly higher CH4 production rate compared to pure ZnO and g-C3N4.

ADVANCED SUSTAINABLE SYSTEMS (2022)

Add to Collection
Article Environmental Sciences

Construction of S-scheme CdS/g-C3N4 nanocomposite with improved visible-light photocatalytic degradation of methylene blue

Kim Nguyen Van et al.

Summary: In this study, CdS/g-C3N4 composites were successfully prepared and showed enhanced photocatalytic activity in the degradation of methylene blue under visible light. The improved activity was attributed to effective photo-induced electron-hole separation and the main contribution of oxidative hydroxyl radicals. Through a S-scheme model, the depletion of photo-induced holes on CdS was clarified as the reason for the enhancement in resistance to photocorrosion of the composites.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Defect engineering of water-dispersible g-C3N4 photocatalysts by chemical oxidative etching of bulk gC3N4 prepared in different calcination atmospheres

Thi Kim Anh Nguyen et al.

Summary: In this study, water-dispersible graphitic carbon nitride (g-C3N4) photocatalysts were prepared by chemically oxidative etching of thermally polymerized bulk g-C3N4 in different calcination atmospheres. The different atmospheres influenced the physicochemical and optical properties of the photocatalysts and their photocatalytic degradation behavior. The water-dispersible g-C3N4 photocatalyst from the oxygen-free N2 atmosphere exhibited the highest photocatalytic activity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Sulfur Vacancy-Mediated Electron-Hole Separation at MoS2/CdS Heterojunctions for Boosting Photocatalytic N2 Reduction

Xiuzhen Zheng et al.

Summary: Defect engineering is an effective method for improving the photocatalytic activity of semiconductor photocatalysis. In this study, MoS2/CdS heterojunctions with abundant sulfur vacancies were synthesized and used for photocatalytic N-2 reduction. The charge transfer behaviors of the photocatalysts were characterized, and it was found that 3% Mo-2/CdS heterojunctions exhibited significantly higher NH3 production compared to pure MoS2 and pristine CdS under visible light irradiation. The reaction mechanisms and pathways were further studied.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Bandgap control of p-n heterojunction of Cu-Cu2O@ ZnO with modified reduced graphene oxide nanocomposites for photocatalytic hydrogen evolution

Hoai-Thanh Vuong et al.

Summary: Here, the in-situ synthesis of multicomponent ZnO-based photocatalysts for hydrogen production is described. The introduction of modified reduced graphene oxide (mRGO) and Cu-Cu2O nanoparticles significantly enhances the production rate of photocatalytic hydrogen and prevents charge carriers' recombination, resulting in efficient hydrogen yields.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Oxygen doping facilitated N-vacancies in g-C3N4 regulates electronic band gap structure for trimethoprim and Cr (VI) mitigation: Simulation studies and photocatalytic degradation pathways

Vasudha Hasija et al.

Summary: This study demonstrates the enhancement of photocatalytic activity of graphitic carbon nitride (CN) by elemental doping and nitrogen vacancies. The doped CN material exhibited excellent photocatalytic efficiency for the degradation of trimethoprim antibiotic and reduction of chromium under visible light irradiation. The band gap reduction and band structure regulation were confirmed by experimental results and simulation studies. The synergy of nitrogen vacancies and oxygen doping sites inhibited electron-hole recombination, leading to the generation of superoxide anion radicals and hydroxyl radicals. The research also proposed the intermediate formation and degradation mechanism of trimethoprim, as investigated by density functional theory studies.

APPLIED MATERIALS TODAY (2022)

Add to Collection
Article Chemistry, Physical

Fabrication of heterostructured CdS/g-C3N4/ZnFe2O4 nanocomposite synthesized through ultrasonic-assisted method for efficient photocatalytic hydrogen production br

Rania Belakehal et al.

Summary: In this study, CdS/g-C3N4/ZnFe2O4 nanocomposite was synthesized for efficient hydrogen production from water under visible light. The CdS/g-C3N4/ZnFe2O4 nanocomposite exhibited the highest hydrogen production rate compared to other materials. The type II heterostructure of CdS/g-C3N4/ZnFe2O4 achieved efficient directional transfer of photocarriers and prevented carrier recombination. This study offers new alternatives for the preparation of magnetic ternary photocatalysts with increased efficiency and stability for hydrogen production applications.

APPLIED SURFACE SCIENCE (2022)

Add to Collection
Article Engineering, Environmental

Assembling Ti3C2 MXene into ZnIn2S4-NiSe2 S-scheme heterojunction with multiple charge transfer channels for accelerated photocatalytic H2 generation

Junxian Bai et al.

Summary: In this study, a ZnIn2S4-NiSe2 S-scheme heterojunction photocatalyst with multiple internal electric fields was designed to enhance the efficiency of photocatalytic hydrogen evolution.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Physical

H2-production and electron-transfer mechanism of a noble-metal-free WO3@ZnIn2S4 S-scheme heterojunction photocatalyst

Shuang Cao et al.

Summary: Researchers developed a noble-metal-free photocatalyst with an S-scheme heterojunction structure, which demonstrated strong redox ability and achieved efficient hydrogen production under solar irradiation. The catalyst outperformed most noble metal-based photocatalysts in terms of hydrogen evolution activity.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Triple-Channel Charge Transfer over W18O49/Au/g-C3N4 Z-Scheme Photocatalysts for Achieving Broad-Spectrum Solar Hydrogen Production

Inju Hong et al.

Summary: Z-scheme heterojunctions, particularly those with Au nanoparticle mediators like W18O49/Au/g-C3N4, show enhanced photocatalytic hydrogen production rates compared to direct Z-scheme heterojunctions, thanks to the triple-channel charge-transfer mechanism involving Z-scheme charge transfer, localized surface plasmon resonances from Au and W18O49, and extended light harvesting capabilities.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Green & Sustainable Science & Technology

CoS@TiO2 S-scheme heterojunction photocatalyst for hydrogen production from photoinduced water splitting

Hyerim Park et al.

Summary: A core-shell xCoS@yTiO2 heterojunction catalyst is synthesized by weaving cobalt sulfide microsheet particles into a polyhedral cage and enclosing it with titanium dioxide nanoparticles, resulting in higher photocatalytic activity for hydrogen evolution. The favorable bandgap location for water splitting, higher photocurrent density, lower photoluminescence, and strong redox sites of the catalyst delay the recombination of photo-induced electron/hole pairs, leading to stable high catalytic efficiency even after repeated recycling.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection
Article Chemistry, Physical

Enhancing the macroscopic polarization of CdS for piezo-photocatalytic water splitting

Meiyu Zhang et al.

Summary: This study reveals for the first time the enhancement of macroscopic polarization induced by the phase junction system for the improvement of piezo-photocatalytic H2 evolution of CdS.

NANO ENERGY (2021)

Add to Collection
Article Energy & Fuels

Tracking S-Scheme Charge Transfer Pathways in Mo2C/CdS H2-Evolution Photocatalysts

Rongchen Shen et al.

Summary: Efficient and low-cost photocatalysts remain crucial for practical applications, with the NiS-modified Mo2C/CdS nanostructure showing promising results in hydrogen evolution. Mo2C was identified as a semiconductor for photocatalytic hydrogen evolution, with charge transfer pathways elucidated through advanced spectroscopic techniques.

SOLAR RRL (2021)

Add to Collection
Article Environmental Sciences

Fabrication of S-scheme CdS-g-C3N4-graphene aerogel heterojunction for enhanced visible light driven photocatalysis

Jianhui Liu et al.

Summary: Constructing S-scheme heterojunction photocatalysts through a facile ultrasound strategy demonstrates improved separation efficiency of photogenerated carriers and enhanced harvesting ability of solar energy. The ternary CdS-g-C3N4-GA heterojunction exhibits significantly enhanced photocatalytic degradation performance for dyes and antibiotic wastewater, as well as improved photocatalytic H2 production activity.

ENVIRONMENTAL RESEARCH (2021)

Add to Collection
Review Nanoscience & Nanotechnology

Polymer photocatalysts for solar-to-chemical energy conversion

Tanmay Banerjee et al.

Summary: Organic polymeric photocatalysts offer a promising solution for sustainable energy resources with their precise molecular backbone and broad design space. By analyzing the photophysical and physico-chemical concepts, design principles and future research directions in the emerging field of 'soft photocatalysis' can be derived. The review discusses the fundamental concepts governing the photocatalytic performance of organic polymer photocatalysts and explores the challenges and potential future developments in the field.

NATURE REVIEWS MATERIALS (2021)

Add to Collection
Review Engineering, Environmental

Generation of H2O2 by on-site activation of molecular dioxygen for environmental remediation applications: A review

Liu Pi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Defect Engineering in Atomic-Layered Graphitic Carbon Nitride for Greatly Extended Visible-Light Photocatalytic Hydrogen Evolution

Jin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Engineering, Electrical & Electronic

In situ self-assembly of 3D hierarchical 2D/2D CdS/g-C3N4 hereojunction with excellent photocatalytic performance

Xinmei Liu et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2020)

Add to Collection
Article Nanoscience & Nanotechnology

In Situ Photodeposited Construction of Pt-CdS/g-C3N4-MnOx Composite Photocatalyst for Efficient Visible-Light-Driven Overall Water Splitting

Xunfu Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Chemistry, Physical

Synthesis of EDTA-bridged CdS/g-C3N4 heterostructure photocatalyst with enhanced performance for photoredox reactions

Yi Xiao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection
Review Chemistry, Physical

A review on C1s XPS-spectra for some kinds of carbon materials

Xiangnan Chen et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Piezocatalysis and Piezo-Photocatalysis: Catalysts Classification and Modification Strategy, Reaction Mechanism, and Practical Application

Shuchen Tu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Article Multidisciplinary Sciences

Unique S-scheme heterojunctions in self-assembled TiO2/CsPbBr3 hybrids for CO2 photoreduction

Feiyan Xu et al.

NATURE COMMUNICATIONS (2020)

Add to Collection
Article Chemistry, Physical

Carbon vacancies and hydroxyls in graphitic carbon nitride: Promoted photocatalytic NO removal activity and mechanism

Zhanyong Gu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection
Article Chemistry, Physical

Near Infrared Light-Driven Photoelectrocatalytic Water Splitting over P-Doped g-C3N4

Fang Wu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection
Article Energy & Fuels

In Situ Fabrication of Robust Cocatalyst-Free CdS/g-C3N4 2D-2D Step-Scheme Heterojunctions for Highly Active H2 Evolution

Doudou Ren et al.

SOLAR RRL (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Decorating g-C3N4 Nanosheets with Ti3C2 MXene Nanoparticles for Efficient Oxygen Reduction Reaction

Xuelian Yu et al.

LANGMUIR (2019)

Add to Collection
Article Chemistry, Physical

S-Scheme Heterojunction TiO2/CdS Nanocomposite Nanofiber as H2-Production Photocatalyst

Haonan Ge et al.

CHEMCATCHEM (2019)

Add to Collection
Article Chemistry, Physical

In situ photochemical fabrication of CdS/g-C3N4 nanocomposites with high performance for hydrogen evolution under visible light

Lei Chen et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection
Article Chemistry, Physical

Surface modified C, O co-doped polymeric g-C3N4 as an efficient photocatalyst for visible light assisted CO2 reduction and H2O2 production

Subhajyoti Samanta et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Defective g-C3N4 Prepared by the NaBH4 Reduction for High-Performance H2 Production

Yuanjing Wen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection
Article Chemistry, Physical

Midgap-state-mediated two-step photoexcitation in nitrogen defect-modified g-C3N4 atomic layers for superior photocatalytic CO2 reduction

Jie-Yinn Tang et al.

CATALYSIS SCIENCE & TECHNOLOGY (2019)

Add to Collection
Article Chemistry, Inorganic & Nuclear

A sulfur vacancy rich CdS based composite photocatalyst with g-C3N4 as a matrix derived from a Cd-S cluster assembled supramolecular network for H2 production and VOC removal

Yaqin Wang et al.

DALTON TRANSACTIONS (2018)

Add to Collection
Article Chemistry, Physical

Consciously Constructing Heterojunction or Direct Z-Scheme Photocatalysts by Regulating Electron Flow Direction

Wenshuai Jiang et al.

ACS CATALYSIS (2018)

Add to Collection
Article Multidisciplinary Sciences

Vertical Alignment of Liquid Crystals Over a Functionalized Flexible Substrate

B. Sivaranjini et al.

SCIENTIFIC REPORTS (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Combination Mechanism and Enhanced Visible-Light Photocatalytic Activity and Stability of CdS/g-C3N4 Heterojunctions

Huanyan Xu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Add to Collection
Review Chemistry, Physical

Photocatalysis: Basic Principles, Diverse Forms of Implementations and Emerging Scientific Opportunities

Shasha Zhu et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Alkali-Assisted Synthesis of Nitrogen Deficient Graphitic Carbon Nitride with Tunable Band Structures for Efficient Visible-Light-Driven Hydrogen Evolution

Huijun Yu et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Atomically Thin Mesoporous Nanomesh of Graphitic C3N4 for High-Efficiency Photocatalytic Hydrogen Evolution

Qing Han et al.

ACS NANO (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Nitrogen-Doped Porous Carbon Nanosheets Templated from g-C3N4 as Metal-Free Electrocatalysts for Efficient Oxygen Reduction Reaction

Huijun Yu et al.

ADVANCED MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

Partial Oxidation of Alcohols on Visible-Light-Responsive WO3 Photocatalysts Loaded with Palladium Oxide Cocatalyst

Osamu Tomita et al.

ACS CATALYSIS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

High-yield synthesis and optical properties of g-C3N4

Yanwen Yuan et al.

NANOSCALE (2015)

Add to Collection
Article Chemistry, Physical

Effects of Surface Defects on Photocatalytic H2O2 Production by Mesoporous Graphitic Carbon Nitride under Visible Light Irradiation

Yasuhiro Shiraishi et al.

ACS CATALYSIS (2015)

Add to Collection
Article Chemistry, Physical

Enhanced Driving Force and Charge Separation Efficiency of Protonated g-C3N4 for Photocatalytic O2 Evolution

Chen Ye et al.

ACS CATALYSIS (2015)

Add to Collection
Review Chemistry, Physical

CdS/Graphene Nanocomposite Photocatalysts

Qin Li et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Paper-Based N-Doped Carbon Films for Enhanced Oxygen Evolution Electrocatalysis

Sheng Chen et al.

ADVANCED SCIENCE (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Efficient Visible-Light Photocatalytic Hydrogen Evolution and Enhanced Photostability of Core/Shell CdS/g-C3N4 Nanowires

Jiye Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection
Editorial Material Chemistry, Physical

Get the Basics Right: Jacobian Conversion of Wavelength and Energy Scales for Quantitative Analysis of Emission Spectra

Jonathan Mooney et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

Add to Collection
Article Multidisciplinary Sciences

Spatial separation of photogenerated electrons and holes among {010} and {110} crystal facets of BiVO4

Rengui Li et al.

NATURE COMMUNICATIONS (2013)

Add to Collection
Article Chemistry, Multidisciplinary

The roles of defect states in photoelectric and photocatalytic processes for ZnxCd1-xS

Jianying Shi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Nanoporous Graphitic-C3N4@Carbon Metal-Free Electrocatalysts for Highly Efficient Oxygen Reduction

Yao Zheng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Efficient Visible-Light-Driven Photocatalytic Hydrogen Production of CdS-Cluster-Decorated Graphene Nanosheets

Qin Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.