Related references
Note: Only part of the references are listed.
Article
Agriculture, Multidisciplinary
Xiuli Zhou et al.
Summary: The objective of this study was to investigate the effectiveness of a multi-parameter intelligent fault diagnosis method based on a modified random forest algorithm (RFNB algorithm) to reduce the impact of blockage fault on the operation of a silage harvester and provide a reference for intelligent control. The results showed that the RFNB algorithm had higher fault diagnosis accuracy compared to the RF algorithm, and it provided a new idea for fault monitoring and early warning of large agricultural rotating machinery in the future.
INFORMATION PROCESSING IN AGRICULTURE
(2023)
Article
Acoustics
Nouby M. Ghazaly et al.
Summary: This paper introduces a vibration-based fault detection algorithm for predicting the location of misfire in a spark-ignited engine. By mapping the misfire location on a self-organizing neural network using the Khonen self-organizing map (SOM) algorithm, it is found that the SOM has the ability to discern misfire locations in three-dimensional vibration signals. The clustering of the 3D vibration signals improves the detection accuracy of misfires.
Article
Agriculture, Multidisciplinary
Yanbin Liu et al.
Summary: This study aims to develop a variable-diameter threshing drum and a monitoring method for rice combine harvesters to improve threshing performance. The experimental results show that the method of adjusting the threshing gap has a significant influence on the piston rod load force, and the monitoring method is feasible and provides a basis for the development of an adaptive control system.
COMPUTERS AND ELECTRONICS IN AGRICULTURE
(2022)
Article
Agriculture, Multidisciplinary
Zhaomei Qiu et al.
Summary: This study presents a remote monitoring system for combine harvesters based on multi-source information fusion, which can effectively monitor, diagnose faults, and provide remote dispatching guidance.
COMPUTERS AND ELECTRONICS IN AGRICULTURE
(2022)
Review
Engineering, Industrial
Junliang Wang et al.
Summary: This paper provides a comprehensive review of big data analytics (BDA) for intelligent manufacturing systems, covering the concepts, methodologies, and applications. BDA has shown great potential in improving the efficiency and outcomes of product design, manufacturing, and maintenance. However, there are still challenges and opportunities that need further research and exploration.
JOURNAL OF MANUFACTURING SYSTEMS
(2022)
Article
Engineering, Chemical
Huiting Ni et al.
Summary: This paper focuses on the faults of tractor transmission and uses support vector machine method to identify three fault modes with high classification accuracy and fault diagnosis correctness. The analysis of fault recording data shows that there is a small difference between fault pressure data and normal data, while the value of traffic data is greater. This study provides a theoretical basis for fault diagnosis of the PST electro-hydraulic control system.
Article
Agriculture, Multidisciplinary
Man Chen et al.
Summary: This paper constructs an online field operation performance evaluation system for a combine harvester, which can obtain real-time information on the field operation parameters. The proposed system has a high sensitivity to the change in each index and can dynamically monitor the field operation performance of a combine harvester, providing technical support.
COMPUTERS AND ELECTRONICS IN AGRICULTURE
(2022)
Article
Thermodynamics
Shi Yin et al.
Summary: In this study, a wind power prediction model based on outlier correction, ensemble reinforcement learning, and residual correction is proposed. The experimental results show that the model has excellent prediction accuracy and superiority.
Article
Chemistry, Multidisciplinary
Shenghe Bai et al.
Summary: This article introduces the design of a remote operation and maintenance platform for combine harvesters to address the issues of extensive operation, inefficient operation and maintenance, and backward management. The platform consists of modules such as data monitoring, fault prediction, fault diagnosis, and comprehensive operation maintenance, which enable real-time monitoring, fault prediction, fault diagnosis, and formulation of maintenance strategies to improve the intelligent operation level and maintenance efficiency of combine harvesters.
APPLIED SCIENCES-BASEL
(2022)
Article
Agronomy
Weipeng Zhang et al.
Summary: A comprehensive operation and maintenance platform for combine harvesters was developed to address the difficulties in diagnosing and processing faults in real-time. The platform enables data monitoring, full operation and maintenance, and effective maintenance service. The IPSO-SVM fault diagnosis algorithm was proposed and verified through simulation tests, showing a prediction accuracy of 97.96%.
Article
Agriculture, Multidisciplinary
Yifan Sun et al.
Summary: In this study, a real-time monitoring system for harvester feed rate is designed and developed. A calculation model for feed rate is established using a particle swarm optimization-back propagation neural network, and an estimation method for yield distribution information is proposed. Field experiments verify the high accuracy of the system.
COMPUTERS AND ELECTRONICS IN AGRICULTURE
(2022)
Article
Physics, Multidisciplinary
Guangyou Yang et al.
Summary: This paper introduces a fault diagnosis method for rolling bearings based on multivariate multiscale sample entropy and refined composite sample entropy. By using stacked denoising autoencoders to filter vibration signal noise and utilizing a support-vector machine model for diagnosis, the accuracy and efficiency of rolling bearing fault identification are improved.
Article
Engineering, Civil
Yang Yang et al.
Summary: This research aims to reveal the internal coupling mechanisms and differences of freeway traffic crashes in different area types, and proposes an improved weighted orientated multiple dimension interactive Apriori algorithm (WOMDI-Apriori) to accurately identify crash causes and risk factors.
JOURNAL OF TRANSPORTATION ENGINEERING PART A-SYSTEMS
(2022)
Article
Chemistry, Analytical
Massimo Cecchini et al.
Summary: This study explores failures induced by vibrations on machines, particularly agricultural ones, through a survey with operators, sub-contractors, and producers. It identifies common failures on the rotary harrow, proposes a method to investigate bearing failures, and suggests the development of a future maintenance system for continuous monitoring of the bearing.
Article
Agronomy
Tan Wang et al.
Summary: As the global population grows and agricultural labor shortages worsen, researching the development of unmanned farms becomes necessary. Utilizing technologies such as the Internet of Things and artificial intelligence to develop unmanned farms is the trend for the future.
Article
Environmental Sciences
Jianzhuo Yan et al.
Summary: The study proposed a new comprehensive deep learning water quality prediction algorithm, which achieved effective prediction of water quality parameters through data processing and model integration. Experimental results on actual water quality data demonstrated that the method has higher prediction accuracy and generalization ability, outperforming existing LSTM, GRU, and BiGRU models.
Article
Green & Sustainable Science & Technology
Mohd Khanapi Abd Ghani et al.
Summary: Physicians rely on experience and symptomatic diagnosis, which may lead to longer wait times and patient pressure. A decision-support system for diagnosing hearing loss symptoms was developed using machine learning techniques, with an average accuracy rate of 98.25% demonstrated in the study.
Proceedings Paper
Engineering, Industrial
Jia Shi et al.
Summary: The combine harvester operates in a complex and changeable environment, and fault diagnosis methods need to comprehensively analyze the rotation speed and torque to issue timely warnings and alarms, effectively distinguishing real blockages from false ones, and improving operational efficiency.
PROCEEDINGS OF THE 2021 IEEE 16TH CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2021)
(2021)
Article
Computer Science, Hardware & Architecture
Nour Moustafa et al.
Summary: The study introduces a threat intelligence technique for web attacks that uses feature extraction and anomaly detection methods to effectively improve attack detection rates, outperforming other machine learning mechanisms in empirical evaluations.
IEEE TRANSACTIONS ON SUSTAINABLE COMPUTING
(2021)
Review
Engineering, Mechanical
Yaguo Lei et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2020)
Article
Engineering, Mechanical
Onur Avci et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2020)
Article
Agriculture, Multidisciplinary
Mingdong Chen et al.
COMPUTERS AND ELECTRONICS IN AGRICULTURE
(2020)
Article
Engineering, Mechanical
Rui Zhao et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2019)
Article
Thermodynamics
Ronggeng Huang et al.
APPLIED THERMAL ENGINEERING
(2018)
Review
Agriculture, Multidisciplinary
Sjaak Wolfert et al.
AGRICULTURAL SYSTEMS
(2017)
Article
Computer Science, Software Engineering
Youzhong Ma et al.
CONCURRENCY AND COMPUTATION-PRACTICE & EXPERIENCE
(2016)
Review
Automation & Control Systems
Khaoula Tidriri et al.
ANNUAL REVIEWS IN CONTROL
(2016)
Article
Computer Science, Artificial Intelligence
Wa'el Hadi et al.
APPLIED SOFT COMPUTING
(2016)
Article
Agriculture, Multidisciplinary
Zhong Tang et al.
SPANISH JOURNAL OF AGRICULTURAL RESEARCH
(2014)
Review
Computer Science, Artificial Intelligence
Shichao Zhang et al.
WILEY INTERDISCIPLINARY REVIEWS-DATA MINING AND KNOWLEDGE DISCOVERY
(2011)
Article
Agricultural Engineering
Geert Craessaerts et al.
BIOSYSTEMS ENGINEERING
(2010)
