Journal
SURFACES AND INTERFACES
Volume 41, Issue -, Pages -Publisher
ELSEVIER
DOI: 10.1016/j.surfin.2023.103191
Keywords
Atomic and close-to-atomic scale; manufacturing; Plasma etching; Atom migration; Sub-surface damage; Roughness
Ask authors/readers for more resources
In this study, a hybrid manufacturing process based on inductively coupled plasma (ICP) was proposed to effectively reduce subsurface damage and achieve an ultra-smooth surface on fused silica optics at an atomic scale. The process combined isotropic etching polishing (IEP) and atom-migration manufacturing (AMM), where a large number of isotropic etching pits were formed, enlarged, overlapped, and merged to create a smooth surface in the plasma-IEP process. By continuously removing the subsurface damage layer, plasma-IEP could generate a less damage surface of fused silica with a material removal rate of 0.8 pm/min and reduce the roughness from 97.1 nm to 31.3 nm. Plasma-AMM further reduced the surface roughness to less than 0.15 nm without subtractive actions. Laser induced damage threshold (LIDT) tests showed that the fused silica surface after the IEP-AMM hybrid manufacturing could withstand higher laser fluence, indicating its potential for more effective applications in high-power laser systems. This study proposed and verified the hybrid plasma manufacturing process, providing a less damage manufacturing process for fused silica with an ultra-smooth surface.
In order to effectively reduce the subsurface damage of fused silica optics and obtain an ultra-smooth surface at atomic scale, we proposed a hybrid manufacturing process based on inductively coupled plasma (ICP), which combined isotropic etching polishing (IEP) and atom-migration manufacturing (AMM). In the plasma-IEP process, a large number of isotropic etching pits with ultra-smooth inner surface formed, enlarged, overlapped and merged, resulting in a smooth surface. The continuous downward etching process was accompanied by the continuous removal of the subsurface damage layer. With optimized process parameters, plasma-IEP could efficiently generate a less damage surface of fused silica with a material removal rate of 0.8 pm/min, and reduce the Sa roughness from 97.1 nm to 31.3 nm. The surface roughness could be further reduced to less than 0.15 nm by plasma-AMM, which was a non-subtractive finishing approach. The result of laser induced damage threshold (LIDT) test showed that the fused silica surface after the IEP-AMM hybrid manufacturing could withstand higher laser fluence, which implied more effective applications of this technique in high-power laser systems. This study proposed and verified the hybrid plasma manufacturing process combining plasma-IEP and plasma-AMM, which provided an ultra-smooth surface with less damage manufacturing process for fused silica.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available