4.7 Article

Stress-unloading and gas migration improvement mechanism in the soft and hard interbedded coal seam using directional hydraulic flushing technology

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Effect of Moisture on Time-Varying Diffusion Properties of Methane in Low-Rank Coal

Jingyu Jiang et al.

Summary: This paper studies the influence of moisture on gas outbursts and diffusion properties of low-rank coal. It is found that moisture significantly reduces the release and diffusion capacity of low-rank coal and is also related to the competitive adsorption between methane molecules. The results provide a theoretical basis for using hydraulic technology to prevent gas outbursts in low-rank coal mining.

TRANSPORT IN POROUS MEDIA (2023)

Article Mining & Mineral Processing

Performance of N95 elastomeric respirators in high humidity and high coal dust concentration environment

Jintuo Zhu et al.

Summary: This study quantitatively evaluates the performance of respirators used in deep coal mines under high humidity and high dust concentration conditions. The results show that the filtration efficiency of respirators decreases and breathing resistance increases with the increase of dust loading and concentration.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Article Mining & Mineral Processing

Experimental study on the deformation behaviour, energy evolution law and failure mechanism of tectonic coal subjected to cyclic loads

Deyi Gao et al.

Summary: The deformation behavior and mechanical properties of tectonic coal under cyclic loading were studied. It was found that the stress-strain curve of tectonic coal could be divided into four stages, and its internal structure can be damaged. Tectonic coal exhibits nonlinear energy storage characteristics and is prone to coal and gas outbursts.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Article Engineering, Environmental

Enhanced coalbed permeability and methane recovery via hydraulic slotting combined with liquid CO2 injection

Gaoming Wei et al.

Summary: The study utilizes hydraulic slotting and liquid CO2 injection to enhance coalbed permeability and methane recovery efficiency. The results show a significant increase in coal porosity and permeability, leading to more than 90% CBM recovery efficiency. The in-situ test indicates effective radii for HS and LCO2 injection were 2.5 m and 10 m, respectively, with a 2.2-fold increase in CBM recovery efficiency.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Engineering, Geological

Modeling coupled gas flow and geomechanics process in stimulated coal seam by hydraulic flushing

Ting Liu et al.

Summary: Hydraulic flushing (HF) is an efficient technique for improving coal mine gas extraction, but the mechanism of enhancing permeability is still not fully understood. A coupled gas flow-geomechanics model based on an equivalent fractured-coal model was developed to study the effects of coal strength and borehole diameter on HF. Results show that soft coal has a greater decrease in gas pressure and enhanced permeability compared to hard coal.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Review Energy & Fuels

Reservoir properties of Chinese tectonic coal: A review

Yuanping Cheng et al.

Article Energy & Fuels

Increased permeability and coal and gas outburst prevention using hydraulic flushing technology with cross-seam borehole

Dongdong Chen et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2020)

Article Energy & Fuels

Gas flow in hydraulic slotting-disturbed coal seam considering stress relief induced damage

Yang Zhao et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2020)

Article Engineering, Geological

Role of Tectonic Coal in Coal and Gas Outburst Behavior During Coal Mining

Qingyi Tu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Article Engineering, Environmental

Numerical assessment of the energy instability of gas outburst of deformed and normal coal combinations during mining

Shouqing Lu et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2019)

Article Engineering, Geological

Determination of hydraulic flushing impact range by DC resistivity test method

Liming Qiu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)

Article Engineering, Environmental

Application of Hydraulic Flushing in Coal Seams to Reduce Hazardous Outbursts in the Mengjin Mine, China

Jingyu Jiang et al.

ENVIRONMENTAL & ENGINEERING GEOSCIENCE (2018)

Article Energy & Fuels

Effect of maceral composition and coal rank on gas diffusion in Australian coals

Alireza Keshavarz et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2017)

Article Engineering, Geological

Adjacent seam pressure-relief gas drainage technique based on ground movement for initial mining phase of longwall face

Guozhong Hu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Article Engineering, Geological

Application of 3D laser scanner, optical transducers and digital image processing techniques in physical modelling of mining-related strata movement

Behrooz Ghabraie et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Article Energy & Fuels

Drilling large diameter cross-measure boreholes to improve gas drainage in highly gassy soft coal seams

Yabin Gao et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)

Article Engineering, Geological

A Mathematical Model of Coupled Gas Flow and Coal Deformation with Gas Diffusion and Klinkenberg Effects

Qingquan Liu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

Article Mining & Mineral Processing

Application of deep borehole blasting on fully mechanized hard top-coal pre-splitting and gas extraction in the special thick seam

Liu Jian et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2015)

Article Computer Science, Interdisciplinary Applications

A numerical model for outburst including the effect of adsorbed gas on coal deformation and mechanical properties

Feng-hua An et al.

COMPUTERS AND GEOTECHNICS (2013)

Article Engineering, Geological

Safety technologies for the excavation of coal and gas outburst-prone coal seams in deep shafts

Liang Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

Review Energy & Fuels

Modelling permeability for coal reservoirs: A review of analytical models and testing data

Zhejun Pan et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2012)

Article Engineering, Geological

A mobilized dilation angle model for rocks

X. G. Zhao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)

Article Energy & Fuels

Analysis and Verification of Dual Porosity and CBM Shape Factors

C. A. Mora et al.

JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY (2009)

Article Energy & Fuels

Advanced coal characterization: A review

Rajender Gupta

ENERGY & FUELS (2007)

Article Engineering, Geological

Ground response curves for rock masses exhibiting strain-softening behaviour

E Alonso et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2003)

Article Energy & Fuels

Coal and gas outbursts in footwalls of reverse faults

YX Cao et al.

INTERNATIONAL JOURNAL OF COAL GEOLOGY (2001)