☆ 4.7 Article

Stability prediction of hard rock pillar using support vector machine optimized by three metaheuristic algorithms

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Development of a hybrid artificial intelligence model to predict the uniaxial compressive strength of a new aseismic layer made of rubber-sand concrete

Xiancheng Mei et al.

Summary: This study proposes a novel rubber-sand concrete (RSC) as an aseismic material and uses an artificial intelligence model, the back propagation neural network (BPNN), to predict its uniaxial compressive strength (UCS). The results show that the LSO-BPNN hybrid model has the best prediction capability. Sensitivity analysis reveals that rubber and sand have the greatest impact on UCS prediction.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2023)

Add to Collection

Article Engineering, Geological

Proposing several hybrid SSA-machine learning techniques for estimating rock cuttability by conical pick with relieved cutting modes

Jian Zhou et al.

Summary: This paper develops six machine learning algorithms optimized by the sparrow search algorithm for specific energy (SE) prediction in roadheader excavation. The results show that cutting depth, uniaxial compressive strength of the rock, and tensile strength of the rock are the most significant input variables for SE prediction.

ACTA GEOTECHNICA (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement

Mahdi Shariati et al.

Summary: The study introduces a novel hybrid ELM-GWO model to predict the compressive strength of concrete with partial replacements for cement. The results demonstrate that combining the ELM model with GWO can efficiently improve performance, leading to superior performance indices compared to other models.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Evolving support vector regression using Grey Wolf optimization; forecasting the geomechanical properties of rock

Chuanhua Xu et al.

Summary: This study presents an evolving support vector regression (SVR) model using Grey Wolf optimization (GWO) for predicting the shear strength (SS) and uniaxial compressive strength (UCS) of rocks. The experimental results show that the proposed SVR-GWO model outperforms other models in the prediction of these parameters.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Engineering, Mechanical

Acoustic emission source location from P-wave arrival time corrected data and virtual field optimization method

Xueyi Shang et al.

Summary: Acoustic emission (AE) event location is crucial for structural safety assessments. This study proposes a Bayesian inversion framework to estimate the P-wave arrival time system error (PATSE) for each sensor and confirms the existence of PATSE in AE experiments. After removing PATSE, the high-precision virtual field optimization location method (VFOM) is used to improve the location performance.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Geological

Predicting tunnel squeezing using support vector machine optimized by whale optimization algorithm

Jian Zhou et al.

Summary: In this study, a model named WOA-SVM was proposed to accurately predict tunnel squeezing by optimizing the support vector machine (SVM) model. The optimized WOA-SVM model showed the highest accuracy among all proposed models, and the percentage strain was identified as the most influential parameter for the model.

ACTA GEOTECHNICA (2022)

Add to Collection

Article Environmental Sciences

Stability Risk Assessment of Underground Rock Pillars Using Logistic Model Trees

Ning Li et al.

Summary: This paper presents a novel application of Logistic Model Trees (LMT) to predict the stability of underground pillars. The results show that the proposed LMT model has the highest accuracy among other common machine learning methods previously employed in the literature, and the average stress and the ratio of pillar width to height are identified as the most influential parameters.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Performance evaluation of hybrid WOA-XGBoost, GWO-XGBoost and BO-XGBoost models to predict blast-induced ground vibration

Yingui Qiu et al.

Summary: The accurate prediction of ground vibration caused by blasting is crucial in the mining industry. The use of advanced supervised machine learning with metaheuristic algorithms can significantly enhance the predictive reliability and accuracy, benefiting mine planners and engineers.

ENGINEERING WITH COMPUTERS (2022)

Add to Collection

Article Mining & Mineral Processing

Shape ratio effects on the mechanical characteristics of rectangular prism rocks and isolated pillars under uniaxial compression

Kun Du et al.

Summary: In this study, the influence of shape ratios on the mechanical properties of rectangular prism rock specimens and isolated pillars under uniaxial compressive stress was investigated. The results showed that the height to width ratio and width to thickness ratio had a significant influence on the bearing ability of rocks. A novel strength prediction model of isolated pillars based on the shape ratios was proposed.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Experimental and numerical studies on progressive debonding of grouted rock bolts

Hao Shi et al.

Summary: Understanding the progressive debonding mechanism of bolts is crucial for underground safety. This paper conducted laboratory experiments and numerical simulations of pull-out tests. The relationship between the pull-out strength of the bolt and the uniaxial compressive strength of the cement mortar material was established, and the locations of cracks were identified using the acoustic emission technique. The results revealed that the axial displacement of the cement mortar material at the peak load was approximately 5 mm, and the peak load of the bolt increased with the strength of the confining medium.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Construction & Building Technology

Optimization of random forest through the use of MVO, GWO and MFO in evaluating the stability of underground entry-type excavations

Jian Zhou et al.

Summary: This study investigates the application of hybrid models based on the random forest algorithm for stability evaluation in underground entry-type excavations. Three optimization strategies are employed to establish three hybrid models, and the classification ability of these models is validated using multiple measurement indexes.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Kernel Extreme Learning Machine-Grey Wolf Optimizer (KELM-GWO) Model to Predict Uniaxial Compressive Strength of Rock

Chuanqi Li et al.

Summary: A novel machine learning model, KELM-GWO, was proposed for predicting rock compressive strength, with the best performance indices. Porosity was identified as the most important parameter for predicting UCS using the mean impact value (MIV) technique.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Mining & Mineral Processing

Proposing a novel comprehensive evaluation model for the coal burst liability in underground coal mines considering uncertainty factors

Jian Zhou et al.

Summary: A robust unascertained combination model is proposed to study coal burst hazard in underground coal mines, incorporating four assessment indexes, four membership functions, and weights determined through information entropy, analysis hierarchy process, and synthetic weights. The model is validated with test samples showing 100% accuracy, indicating its potential for coal burst hazard evaluation in underground coal mines.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Mining & Mineral Processing

Development of ensemble learning models to evaluate the strength of coal-grout materials

Yuantian Sun et al.

Summary: This study introduced the jet grouting technique to improve the self-supporting ability of coal mass and analyzed the strength of JG composite by studying the UCS evolution patterns. The results showed that chemical grout composite has higher short-term strength, while cement grout composite achieves more stable long-term strength. Models with adjusted parameters can achieve high prediction accuracy, highlighting the importance of grout type and curing time consideration.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

Optimization of support vector machine through the use of metaheuristic algorithms in forecasting TBM advance rate

Jian Zhou et al.

Summary: This research aims to optimize the hyper-parameters of the support vector machine technique through the use of three optimization algorithms, namely gray wolf optimization, whale optimization algorithm, and moth flame optimization, for predicting the advance rate of a tunnel boring machine in hard rock conditions. The results indicate that the moth flame optimization algorithm can better capture the hyperparameters of the SVM model in predicting TBM AR.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2021)

Add to Collection

Article Engineering, Environmental

Risk assessment of dynamic disasters in deep coal mines based on multi-source, multi-parameter indexes, and engineering application

Junsheng Du et al.

Summary: This study focuses on improving the accuracy of risk assessment in coal mining by using advanced detection technologies and data fusion to establish new combined evaluation models. By analyzing data from multiple sources and establishing dynamic and static indicators, the study aims to enhance the reliability of detection technologies for typical dynamic disasters. The models developed in this research achieved 100% accuracy and 90% reliability in risk assessment, indicating their potential for improving safety risk control in coal mines.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Deep and confident prediction for a laboratory earthquake

Yuanyuan Pu et al.

Summary: This study aims to predict the time to the next failure in laboratory fault failure experiments using acoustic emission (AE) signals and a customized deep learning network. The network achieved satisfactory results and showed promise for earthquake prediction. Further studies are needed for industrial applications.

NEURAL COMPUTING & APPLICATIONS (2021)

Add to Collection

Article Engineering, Civil

Stability analysis of underground mine hard rock pillars via combination of finite difference methods, neural networks, and Monte Carlo simulation techniques

Chuanqi Li et al.

Summary: The study introduced a new predictive method for evaluating pillar stability by considering the geological strength index of hard rock pillars. Sensitivity analysis identified the key factors influencing pillar stability, while Monte Carlo simulation results highlighted the impact of GSI on pillar stability.

UNDERGROUND SPACE (2021)

Add to Collection

Article Computer Science, Information Systems

Fault Diagnosis of Wind Turbines Based on a Support Vector Machine Optimized by the Sparrow Search Algorithm

Wumaier Tuerxun et al.

Summary: Fault diagnosis technology is crucial for the safe and stable operation of wind turbines, with support vector machines being a popular intelligence method in this field. The use of the sparrow search algorithm to optimize SVM parameters has resulted in the SSA-SVM model having high accuracy and optimization ability in wind turbine fault diagnosis.

IEEE ACCESS (2021)

Add to Collection

Article Mathematics

Predicting Hard Rock Pillar Stability Using GBDT, XGBoost, and LightGBM Algorithms

Weizhang Liang et al.

MATHEMATICS (2020)

Add to Collection

Article Automation & Control Systems

A novel swarm intelligence optimization approach: sparrow search algorithm

Jiankai Xue et al.

SYSTEMS SCIENCE & CONTROL ENGINEERING (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Parametric stability analysis of pillar performance at Nohyun limestone mine, South Koreaa case study

Jong-Gwan Kim et al.

ARABIAN JOURNAL OF GEOSCIENCES (2019)

Add to Collection

Article Engineering, Geological

Performance of a coal pillar at deeper cover: Field and simulation studies

Ashok Kumar et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Review Mining & Mineral Processing

Machine learning methods for rockburst prediction-state-of-the-art review

Yuanyuan Pu et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Prediction of open stope hangingwall stability using random forests

Chongchong Qi et al.

NATURAL HAZARDS (2018)

Add to Collection

Article Construction & Building Technology

Modeling the progressive failure of hard rock pillars

H. Rafiei Renani et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Add to Collection

Article Computer Science, Information Systems

Prediction of Pillar Stability for Underground Mines Using the Stochastic Gradient Boosting Technique

Hangxing Ding et al.

IEEE ACCESS (2018)

Add to Collection

Article Construction & Building Technology

Stability assessment of hard rock pillars using two intelligent classification techniques: A comparative study

Ebrahim Ghasemi et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

The Whale Optimization Algorithm

Seyedali Mirjalili et al.

ADVANCES IN ENGINEERING SOFTWARE (2016)

Add to Collection

Article Construction & Building Technology

Numerical and experimental investigation of pillar reinforcement with pressurized grouting and pre-stress

Hyung-Joon Seo et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)

Add to Collection

Article Geosciences, Multidisciplinary

Comparative performance of six supervised learning methods for the development of models of hard rock pillar stability prediction

Jian Zhou et al.

NATURAL HAZARDS (2015)

Add to Collection

Article Construction & Building Technology

Stochastic assessment of pillar stability at Laisvall mine using Artificial Neural Network

Musa Adebayo Idris et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Grey Wolf Optimizer

Seyedali Mirjalili et al.

ADVANCES IN ENGINEERING SOFTWARE (2014)

Add to Collection

Article Engineering, Geological

Predicting the stability of hard rock pillars using multinomial logistic regression

R. K. Wattimena

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)

Add to Collection

Article Engineering, Mechanical

The mine collapse at Lo Tacon (Murcia, Spain), possible cause of the Torre Pacheco earthquake (2nd May 1998, SE Spain)

Isabel N. Alvarez-Garcia et al.

ENGINEERING FAILURE ANALYSIS (2013)

Add to Collection

Article Engineering, Geological

Numerical study on coupled thermo-mechanical processes in Aspo Pillar Stability Experiment

Pengzhi Pan et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2013)

Add to Collection

Article Engineering, Industrial

Long-term prediction model of rockburst in underground openings using heuristic algorithms and support vector machines

Zhou Jian et al.

SAFETY SCIENCE (2012)

Add to Collection

Article Medical Laboratory Technology

Interrater reliability: the kappa statistic

Mary L. McHugh

BIOCHEMIA MEDICA (2012)

Add to Collection

Article Engineering, Geological

Pillar strength in underground stone mines in the United States

G. S. Esterhuizen et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Add to Collection

Article Geosciences, Multidisciplinary

Support vector machine for evaluating seismic-liquefaction potential using shear wave velocity

Pijush Samui et al.

JOURNAL OF APPLIED GEOPHYSICS (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Predicting pillar stability for underground mine using Fisher discriminant analysis and SVM methods

Zhou Jian et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A numerical investigation of rock pillar failure mechanism in underground openings

A. Mortazavi et al.

COMPUTERS AND GEOTECHNICS (2009)

Add to Collection

Article Engineering, Geological

Prediction of surface crown pillar stability using artificial neural networks

A. S. Tawadrous et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2007)

Add to Collection

Article Engineering, Geological

A comparative analysis of pillar design methods and its application to marble mines

C. Gonzalez-Nicieza et al.

ROCK MECHANICS AND ROCK ENGINEERING (2006)

Add to Collection

Article Engineering, Geological

Pillar design by combining finite element methods, neural networks and reliability: a case study of the Feng Huangshan copper mine, China

J Deng et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.