Related references
Note: Only part of the references are listed.
Article
Engineering, Multidisciplinary
Xiang Li et al.
Summary: In this study, a magnetic field coupling fractional step lattice Boltzmann (FSLB) model is proposed for simulating complex interfacial behaviors in magnetic multiphase flows. The model accurately recovers the macroscopic governing equations and achieves second-order accuracy through the use of equilibrium and non-equilibrium terms obtained from Chapman-Enskog (C-E) expansion analysis. The method predicts intermediate variables by updating the moments of equilibrium distribution functions first, and then corrects the physical variables by updating the moments of non-equilibrium distribution functions.
APPLIED MATHEMATICAL MODELLING
(2023)
Article
Thermodynamics
Michael P. Medlar et al.
Summary: The International Roadmap for Devices and Systems identifies Fin field-effect transistor (FET) array transistors as the mainstream structure for logic devices. However, traditional analysis methods are ineffective when it comes to the length and time scales of these devices. This study uses the statistical phonon transport model (SPTM) to accurately predict the thermal response of FinFET transistor arrays. Results show an excess build-up of optical phonons in the drain region, which significantly impacts performance and reliability.
ASME JOURNAL OF HEAT AND MASS TRANSFER
(2023)
Article
Engineering, Civil
Ying Zhao et al.
Summary: A real-time visualization system was developed to investigate the migration and retention mechanisms of biochar colloids in 2-D porous media under different conditions. The results showed that the electronegativity of biochar colloids and quartz sand increased with decreased ionic strength and increased pH, leading to reduced adhesion and enhanced migration. Additionally, a smaller media grain size inhibited the transport of biochar colloids.
JOURNAL OF HYDROLOGY
(2023)
Article
Thermodynamics
Zhangjie Chen et al.
Summary: Thermal management is crucial for the life and safety of lithium-ion batteries. Accurate calculation of heat generation and minimizing heat production can improve battery thermal management. However, the specific contributions of polarization heat, ohmic heat, and reversible heat to total heat generation, as well as their sensitivities to battery material parameters, have not been well studied, posing challenges for battery thermal management.
APPLIED THERMAL ENGINEERING
(2023)
Article
Nanoscience & Nanotechnology
Nainaru Tarakaramu et al.
Summary: In this study, a numerical analysis is conducted to establish a three-dimensional flow model for non-Newtonian nanofluids. The effects of nonlinear thermal radiation and heat absorption on the flow are considered, along with magnetohydrodynamic and convective conditions. The obtained results show significant differences in velocity, temperature, and heat transfer rate between non-Newtonian and nanofluid cases, depending on various parameters.
JOURNAL OF NANOFLUIDS
(2023)
Article
Water Resources
T. Kadeethum et al.
Summary: In this study, a non-intrusive reduced order model of natural convection in porous media is proposed using deep convolutional autoencoders for compression and reconstruction, and either RBF interpolation or ANNs for mapping parameters. The superiority of nonlinear approach over traditional linear methods is demonstrated. Furthermore, a visual comparison between PCA and t-SNE can indicate the optimal compression strategy.
ADVANCES IN WATER RESOURCES
(2022)
Article
Chemistry, Multidisciplinary
Chuanhao Liu et al.
Summary: A new ER targeting viscosity rotor, L-Vis-1, was developed and used in live cell FLIM imaging to quantitate the viscosity changes of Endoplasmic Reticulum (ER) during ferroptosis promoted by ER stresses. The FLIM imaging demonstrated excellent resolution and successfully monitored the increase in viscosity within ER during ferroptosis processes.
CHINESE CHEMICAL LETTERS
(2022)
Article
Energy & Fuels
Munawwar Ali Abbas et al.
Summary: This paper investigates the entropy generation in a micropolar fluid over a stretching surface. The study analyzes the influence of various physical parameters on velocity, microrotation, and temperature profiles. It also examines the impact of thermal radiation, porous medium, magnetic field, and viscous dissipation. The findings are valuable for the petroleum industry and engineering designs.
Article
Chemistry, Multidisciplinary
Wei Xiang et al.
Summary: This study demonstrates the amplification effect of magnetic field on the hydroxylamine-promoted zero valent iron/H2O2 Fenton-like system, providing a green and energy-efficient method to improve the effectiveness of ZVI-based Fenton-like technologies at weak-acidic circumstances.
CHINESE CHEMICAL LETTERS
(2022)
Article
Chemistry, Multidisciplinary
Chen Zhang et al.
Summary: In this study, colon-targeted nano-micelles with mucoadhesive effect and Azo reductase-triggered drug release profiles were developed for the delivery of curcumin in the treatment of ulcerative colitis. The curcumin-loaded micelles exhibited Azo reductase-sensitive particle dissociation and drug release, enhanced cellular uptake, and prolonged retention on colonic mucosa due to the strong mucoadhesion of catechol structure.
CHINESE CHEMICAL LETTERS
(2022)
Article
Engineering, Mechanical
Jianhua Xiang et al.
Summary: In this study, a thermal resistance theoretical model of a micro-channel heat sink was established and the heat transfer performance of the fabricated micro-channel heat sink was tested. The results showed that the micro-channel heat sink had superior heat dissipation performance compared to conventional heat sinks. Orthogonal optimization of the micro-channel structures further improved the heat dissipation performance.
CHINESE JOURNAL OF MECHANICAL ENGINEERING
(2022)
Article
Thermodynamics
Wissam H. Khalil et al.
Summary: This study investigates natural convection heat transfer in a trapezoidal enclosure using computational simulation, porous media, and magnetohydrodynamics (MHD). The optimum design for the trapezoidal cavity was identified by evaluating the influence of design and operating parameters, and the ideal design significantly increased the hydrothermal performance.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Physics, Multidisciplinary
Kotha Gangadhar et al.
Summary: The current work explores the Darcy free convection around an isothermal vertical cone in a nano liquid saturated porous medium, considering the effects of nanoparticles and oxytactic microorganisms. It is found that increasing Brownian movement leads to a decrease in nanoparticle concentration, and the motile organism profile declines with an increment in bioconvection Lewis number.
WAVES IN RANDOM AND COMPLEX MEDIA
(2022)
Article
Physics, Multidisciplinary
K. Gangadhar et al.
Summary: This study investigates the flow of a nanofluid containing swimming gyrotactic microorganisms past a vertical stretching sheet, considering the Lorentz force characteristics and factors such as viscosity dissipation, Joule heating, and chemical reaction. The effects of parameters on velocity, temperature, motile density profiles, and nanoparticle volume fraction are analyzed using physical justification and statistical analysis.
WAVES IN RANDOM AND COMPLEX MEDIA
(2022)
Article
Engineering, Electrical & Electronic
Yuting Gao et al.
Summary: This article proposes and designs a double-side (DS)-FMM, which features permanent magnets (PMs) on both stator and rotor, for high torque density and low pulsating torque. The design is optimized to improve performance, and thermal and mechanical verifications are carried out for safety. By comparing with a regular PM servo machine, the superior performance of the DS-FMM is demonstrated. Finally, a prototype is built and tested to validate the theoretical design.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Article
Engineering, Multidisciplinary
Sina Gouran et al.
Summary: The aim of the current research is to analyze thermal radiation on nanofluid flow between two circular cylinders under the influence of a magnetic field using two effective computational methods. The numerical and analytical techniques used are the differential quadrature scheme and the optimal homotopy asymptotic approach. Results show that the methods have excellent accuracy, reliability, and simplicity, with temperature and Nusselt number varying with different physical variables.
ALEXANDRIA ENGINEERING JOURNAL
(2022)
Article
Engineering, Multidisciplinary
Yun-Xiang Li et al.
Summary: The study examines the free convection of electrically conducting nanofluid embedding with resistive forces and the magnetic field and permeability of the medium, focusing on the enhancement of heat transfer properties and the significance of nanoparticles in blood arteries.
ALEXANDRIA ENGINEERING JOURNAL
(2022)
Article
Thermodynamics
Bahram Jalili et al.
Summary: This study investigates the flow characteristics and heat transfer performance of magnetohydrodynamics (MHD) nanofluid in an innovative porous, circle-shaped enclosure. The results show that the volume fraction of nanoparticles, inclined angle, Lorentz, and buoyancy forces significantly affect the MHD nanofluid flow.
Article
Mechanics
Yuwu Zhang et al.
Summary: This paper investigates the out-of-plane crushing behavior of hierarchical honeycombs with polygonal substructures and non-uniform wall thickness. Experimental results reveal the variation of deformation mode and failure mechanism with relative density. Theoretical analysis highlights the significant influence of wall thickness ratio on plateau crushing stress.
COMPOSITE STRUCTURES
(2022)
Article
Nanoscience & Nanotechnology
J. X. Fang et al.
Summary: A high-entropy alloy with inhomogeneous chemical composition was prepared using laser powder deposition, and its microstructure and properties were compared with a compositionally homogeneous alloy prepared via electric arc melting + hot forging. The results showed that the laser-deposited alloy had higher yield strength, tensile strength, and elongation, as well as better plasticity under high strain.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
(2022)
Article
Physics, Multidisciplinary
Kotha Gangadhar et al.
Summary: This study investigates the hydrothermal characteristics of two hybrid nanofluids and a familiar nanofluid flowing over a stretchable swirling cylinder. It examines the effects of aggressive space-dependent convective boundary conditions and heat source/sink on the flow and thermal mechanisms. The study also confirms the preference of nanoparticles over familiar fluids for improving heat transfer.
WAVES IN RANDOM AND COMPLEX MEDIA
(2022)
Article
Engineering, Geological
Zedong Yang et al.
Summary: Accurately calculating the frost heave force is crucial for the frost resistance design of tunnels in cold regions. A computational model is used to analyze the mechanical parameters and their influence on the frost heave force. Based on case analysis, the stress and deformation solution for surrounding rock in cold region tunnels is obtained. The results provide insights into the design and simulation of tunnels in cold regions.
INTERNATIONAL JOURNAL OF GEOMECHANICS
(2022)
Article
Engineering, Civil
Wang Yang-yang et al.
Summary: This study investigates the influence of parametric uncertainties in production on failure tensile loads of reinforced thermoplastic pipes (RTPs) under combined loading conditions. The stress distributions in RTPs are analyzed using 3D elasticity theory, and the micromechanics of composites are evaluated analytically. A progressive failure model is established by combining 3D Hashin-Yeh failure criteria with a damage evolution model to evaluate the failure mechanisms of RTPs. The theoretical model is validated through numerical simulations and axial tensile tests. Randomness of relevant parameters is analyzed using the Monte-Carlo approach, and the stochastic analysis results are statistically evaluated using the Weibull probability density distribution function. The failure tensile load of RTPs fluctuates near the mean value due to the randomness of production parameters, and as the ply number at the reinforced layer increases, the dispersion of failure tensile load also increases, with a higher probability that the first-ply failure (FPF) tensile load of RTPs is lower than the mean value.
CHINA OCEAN ENGINEERING
(2022)
Article
Chemistry, Analytical
Muhammad Faizan Ahmed et al.
Summary: This study conducted a numerical investigation of time-dependent magneto-hydro-dynamics (MHD) Eyring-Powell liquid, considering thermal radiation and the regulation of floating nanoparticles using bioconvection. The study found that bioconvection can stabilize nanoparticles and impact the velocity field and dynamic density distribution.
Article
Chemistry, Physical
Omar T. Bafakeeh et al.
Summary: The unsteady MHD free convection heat and mass transfer flow of a viscous, incompressible, and electrically conducting fluid passing through a vertical plate embedded in a porous medium in the presence of chemical reactions and thermal radiation is investigated. Using the perturbation approach, an accurate analytical solution to the governing equations for the fluid velocity, fluid temperature, and species concentration is obtained. The effects of the Hall current, rotation, and Soret are analyzed.
Article
Multidisciplinary Sciences
Kotha Gangadhar et al.
Summary: In this study, the features of heat and mass transfer phenomena of a two-dimensional viscous fluid flow of Oldroyd-B nanofluid over a vertical stretched sheet containing gyrotactic microorganisms are analyzed theoretically. The effects of mixed convection, inclined magnetic field, and thermal radiation are considered, along with Joule heating and heat sink/source. Nonlinear system equations are obtained and solved numerically using the RKF-45 method. The results show that the velocity distribution decreases with relaxation time and thermal stratification parameter, while the motile density profile is enhanced by increasing bioconvection Rayleigh number and buoyancy ratio. These findings are relevant to bio-inspired nanofluid-enhanced fuel cells and nanomaterials fabrication processes.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2022)
Article
Multidisciplinary Sciences
Kotha Gangadhar et al.
Summary: The main objective of the study is to investigate the impact of Lorentz force and convective heating boundary on second-grade nanofluid flow alongside a Riga pattern. By utilizing mathematical modeling and theoretical analysis, the characteristics of nanoparticle flow and modern aspects of heat and mass transport are revealed. The scientific calculations obtained from the study may play a significant role in production processes and the improvement of energy and thermal resources.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2022)
Article
Multidisciplinary Sciences
Kotha Gangadhar et al.
Summary: The study numerically analyzes the convective heat transfer characteristics of a hybrid nanofluid mixture containing magnesium oxide and gold nanoparticles, showing a significant improvement in the thermal behavior of the base fluid, especially in the nodal and saddle point areas where slip effects have a notable impact on heat transfer rate.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2021)
Article
Materials Science, Multidisciplinary
Xiang Li et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
(2020)
Article
Engineering, Multidisciplinary
S. Das et al.
ALEXANDRIA ENGINEERING JOURNAL
(2015)
Article
Nanoscience & Nanotechnology
M. A. Mansour et al.
JOURNAL OF NANOFLUIDS
(2015)
Article
Engineering, Multidisciplinary
Sanatan Das et al.
AIN SHAMS ENGINEERING JOURNAL
(2014)
Article
Physics, Multidisciplinary
Tirivanhu Chinyoka et al.
Article
Thermodynamics
M. M. Rashidi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2013)
Article
Thermodynamics
T. Chinyoka et al.
JOURNAL OF POROUS MEDIA
(2013)
Article
Physics, Multidisciplinary
Atef El Jery et al.
Article
Thermodynamics
Yasin Varol et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2008)
Article
Thermodynamics
S Mahmud et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
(2005)