Related references
Note: Only part of the references are listed.
Article
Engineering, Chemical
Salman Ahmad
Summary: Background: Researchers focus on analyzing heat transfer enhancement in recent years due to its wide range of applications in industries. Nano-particles and hybrid nano-particles are used to increase the heat transfer rate of base fluid, which is an attractive topic for research currently. This particular study compares the heat transfer in the flow of nanofluids (i.e. silver-water and titanium dioxide-water) and hybrid nanofluid (i.e. silver-titanium dioxide-water) over stretchable permeable sheets. The research takes into account Darcy's law to describe nanofluids saturated porous media. The impacts of various flow variables on skin friction, velocity, Nusselt number, and temperature are discussed and analyzed.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2023)
Article
Engineering, Mechanical
Qi Yuan et al.
Summary: Phased array guided wave has great potential for determining damage location and size in plate structures. This study investigates the behavior of phased array guided wave propagation in curved plates through experimental tests and numerical simulations, evaluating the effects of different radii and damage scenarios.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2023)
Article
Thermodynamics
Ghulam Rasool et al.
Summary: This article analyzes the convective boundary layer flows of radiating thixotropic nanofluids over a horizontal stretching surface. By considering the retardational influences of Darcy-Forchheimer and Lorentz forces and the contributions of Brownian and thermophoresis diffusions, the study reveals that the thixotropic feature reinforces the nanofluid motion.
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Physics, Multidisciplinary
Shafiq Ahmad et al.
Summary: This paper investigates the flow of a non-Newtonian fluid over a moving plate, and uses fractional derivatives and Fick's and Fourier's Laws to fractionalize the model. The system of dimensionless fractional partial differential equations is solved using Laplace and Fourier transforms. The results show the influence of physical parameters on velocity, temperature, concentration profiles, skin friction, Sherwood and Nusselt numbers. The findings reveal the relationships between these parameters and the fluid velocity.
FRONTIERS IN PHYSICS
(2023)
Article
Thermodynamics
Yu-Ming Chu et al.
Summary: The study investigates the impact of double diffusion, activation energy, Brownian motion, thermal radiation, thermophoresis, viscous dissipation, magnetic field, and Joule heating on bioconvection of a tangent hyperbolic nanofluid flow over a vertical stretching porous surface containing microbe. The fluid transport equations are solved using the finite difference method and the effects of key parameters on the fluid's transport properties are depicted in graphs and tables. It is observed that higher dimensionless activation energy leads to a decrease in mass transfer rate at the stretched nanomaterial sheet, and the concentration of the nanofluid near the sheet decreases with an increase in the porosity parameter value, but the opposite behavior is observed far from the sheet.
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Noureddine Elboughdiri et al.
Summary: A novel electromagnetic hydromagnetic dissipative second-grade nanofluid flow model is proposed to study the dynamics and thermodynamics behavior of copper-based ethylene glycol nanofluids under the influence of a horizontal electromagnetic actuator. The governing partial differential equations and boundary conditions are derived based on physical assumptions and experimental correlations. A robust generalized differential quadrature algorithm is used to solve the resulting ordinary differential equations and boundary conditions, and the influence of various factors on the flow control process and heat transport mechanism is investigated. The graphical results show that the loading process of nanoparticles has different dynamic and thermal impacts compared to the nanoparticles' diameter size, and the resistive dynamical effect of the electromagnetic actuator enhances the role of thermal radiative heat flux and Joule's heating process in the nanofluidic medium.
CASE STUDIES IN THERMAL ENGINEERING
(2023)
Article
Thermodynamics
Jianhua Xiang et al.
Summary: This article introduces a thermal diode with tesla valve structure to reduce cost and increase unidirectional heat transfer reliability. The relation between structure parameters and fluid flow performance of the tesla vapor channel is studied through experimental investigation and numerical simulation. The experimental results show that the proposed thermal diode has good unidirectional heat transport capacity, with the reverse thermal resistance larger than the forward thermal resistance under a wide range of working conditions. The maximum ratio of reverse thermal resistance to forward thermal resistance K reaches around 3.02 under a filling ratio of 24% and a heating power of 7 W.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
(2023)
Article
Ahmed M. Sedki
Partial Differential Equations in Applied Mathematics
(2023)
Article
Multidisciplinary Sciences
K. Mahmud et al.
Summary: This research attempts to explore MHD oblique flow towards a rotating disk. Ordinary Differential Equations are transformed from the governing Partial Differential Equations using scaling group of transformations and solved using Shooting Algorithm. The impact of obliqueness parameter gamma, rotation ratio parameter alpha and magnetic field parameter M on 2-dimensional and 3-dimensional stream contours are presented. The location of the shear center varies with the magnetic field parameter. Heat flow at the disk surface boosts with magnet field parameter M and rotation ratio parameter alpha.
SCIENTIFIC REPORTS
(2023)
Article
Engineering, Mechanical
Jianhua Xiang et al.
Summary: In this study, a thermal resistance theoretical model of a micro-channel heat sink was established and the heat transfer performance of the fabricated micro-channel heat sink was tested. The results showed that the micro-channel heat sink had superior heat dissipation performance compared to conventional heat sinks. Orthogonal optimization of the micro-channel structures further improved the heat dissipation performance.
CHINESE JOURNAL OF MECHANICAL ENGINEERING
(2022)
Review
Materials Science, Multidisciplinary
Long-Qing Chen et al.
Summary: The article focuses on the phase-field method as a density-based computational method for modeling and predicting temporal microstructure and property evolution during materials processes. It discusses the connections between phase-field equations and classical thermodynamics, as well as the relationships of continuum phase-field equations at different levels. Additionally, it examines the contributions of long-range interactions to domain structure evolution during phase transformations.
PROGRESS IN MATERIALS SCIENCE
(2022)
Article
Mechanics
Chen Yang et al.
Summary: In this study, a large eddy simulation model coupled with the modified Schnerr-Sauer cavitation model was used to numerically simulate the unsteady cavitation and noncavitation flow of a three-dimensional NACA66 hydrofoil under different operating conditions. The results indicate that the magnitude of the cavitation number plays a decisive role in the hydrofoil's cavitation quasiperiodic phenomenon.
Article
Thermodynamics
Nehad Ali Shah et al.
Summary: In this study, the hydro-thermal and mass transport characteristics of a non-homogeneous micropolar mixture were numerically analyzed. The results showed that the micropolarity and electrically conducting properties of the nanofluid play a significant role in enhancing its motion. Furthermore, it was observed that the thermophoresis diffusive mechanism can be further enhanced by the presence of an internal heat source in the convective heating process.
CASE STUDIES IN THERMAL ENGINEERING
(2022)
Article
Thermodynamics
Dong Xiao et al.
Summary: This study highlights the characteristics of deep shale gas drilling process and develops a transient model of wellbore temperature distribution. It emphasizes the effectiveness of insulated drill pipes in reducing wellbore temperature and establishes a system for wellbore cooling and heat energy utilization based on insulated drill pipes and organic Rankine cycle.
APPLIED THERMAL ENGINEERING
(2022)
Article
Engineering, Mechanical
Luofeng Xie et al.
Summary: In this paper, a novel and general framework called convolutional Siamese point net (CSPN) is proposed for partial-to-partial point cloud registration. The network consists of feature extraction, matching matrix computation, and singular value decomposition (SVD), with a pyramidal architecture and novel attention mechanism to address registration challenges for measuring blade profiles.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Geochemistry & Geophysics
Jian Yang et al.
Summary: This study proposes a thermoelastic model using the Pade rational function to characterize the temperature-induced velocity changes in solid rocks. The results show that the Pade model provides a more accurate description of the velocity changes, especially for solid rocks at high temperatures, compared to the conventional Taylor thermoelastic prediction.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
(2022)
Proceedings Paper
Materials Science, Multidisciplinary
Zainab M. Agool et al.
Summary: This study experimentally verifies heat transfer utilizing non-Newtonian fluids with a power-law model in a rectangular enclosure containing a hot obstacle. The impact of aspect proportion, obstacle shape, and various amounts of carboxymethylcellulose on fluid flow characteristics and heat transfer was investigated. The findings reveal that an increased Number of Rayleigh leads to a greater Number of Nusselt, and increased non-Newtonian behavior enhances heat transfer. The shape of the obstacle also has a noticeable impact, as the cylindrical shape enhances heat transfer more than the cuboid shape. Aspect proportion inversely affects heat transfer.
MATERIALS TODAY-PROCEEDINGS
(2022)
Article
Thermodynamics
M. K. Nayak et al.
Summary: The investigation analyzed the flow and heat transfer behavior of a non Newtonian fluid subject to an externally inclined magnetic field. The study revealed that the increase in magnetic field strength has an opposite effect on fluid velocity and temperature, while factors such as thermal relaxation time and curvature parameter play a role in controlling the rate of heat transportation. Additionally, the angle of inclination of the magnetic field affects the fluid flow in a reverse manner.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Engineering, Chemical
M. G. Romano et al.
Summary: Experimental Lagrangian trajectories were used to visualize the flow field of Newtonian and non-Newtonian fluids in a vessel using 3D-PTV. Non-Newtonian fluids showed a smaller impeller flow number compared to Newtonian fluids, and the mean Lagrangian acceleration scaled with the mean shear rate raised to the power of 1:8.
CHEMICAL ENGINEERING SCIENCE
(2021)
Article
Energy & Fuels
Jie Sun et al.
Summary: This study establishes a rheological model for an oil-tolerant and salt-resistant aqueous foam system, and explores the quantitative effects of various rheological and flow parameters on the velocity profile and flow rate in pipe flow of non-Newtonian fluids. The results obtained can be applied or extended to other types of non-Newtonian fluid flow encountered in practical applications.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
(2021)
Article
Materials Science, Multidisciplinary
Noureddine Hadidi et al.
Summary: This study numerically examined natural convection with double diffusion in a tilted square cavity, discussing the effects of various parameters on thermo-solutal natural convection and the rate of mass and thermal exchange. The results showed complex flow structures affecting local transfers such as Nusselt and Sherwood numbers.
RESULTS IN PHYSICS
(2021)
Article
Thermodynamics
S. E. Ghasemi et al.
Summary: This study investigates the influences of solar radiation on two-dimensional stagnation point flow of nanofluid over a stretching sheet, considering the effect of magnetic field and thermal radiation. Numerical results demonstrate the method's accuracy, convergence, and potential. It is found that temperature and thermal boundary layer thickness are increasing functions of Biot number, and that higher Brownian motion parameter values result in greater temperature values and thicker thermal boundary layer.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Engineering, Multidisciplinary
Mohammad Shahabadi et al.
Summary: This study investigates the flow and heat transfer of a power-law non-Newtonian fluid in a cavity, revealing significant effects of the fluid properties on flow and heat transfer processes, as well as a two-way coupling between the fluid and structure.
APPLIED MATHEMATICAL MODELLING
(2021)
Article
Thermodynamics
S. E. Ghasemi et al.
Summary: The main objective of this study is to investigate the thermo-hydraulic behavior of nanofluids in a sinusoidal wavy channel, considering the influences of thermophoresis and Brownian motion. The momentum, continuity, energy, and nanoparticle fraction equations were solved using the differential quadrature method and optimal homotopy asymptotic scheme. Results show that an increase in thermophoresis leads to higher temperature distribution values, while decreasing the thermophoresis parameter enhances the nanoparticle volume fraction.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Engineering, Chemical
Kai Feng et al.
Summary: Experimental study on gas-non-Newtonian fluid flow in a horizontal square microchannel revealed different flow patterns and flow regime maps compared to water. Non-Newtonian behavior of the liquid phase significantly influenced the two-phase pressure drop, and the relationship between pressure drop and gas and fluid flow rates depended on flow pattern. A new correlation considering gas-liquid flow rate ratio and rheological properties of the liquid phase accurately predicted pressure drop data with low percentage errors.
CHEMICAL ENGINEERING RESEARCH & DESIGN
(2021)
Article
Engineering, Chemical
Saeid Malekian et al.
Summary: In the experimental study of interfacial instability in immiscible Newtonian-Non-Newtonian radial displacement, different phenomena were observed in the displacement process at different concentrations. The comparison between Newtonian-Non-Newtonian and Newtonian-Newtonian interfacial development revealed differences in finger patterns. Additionally, the increase in initial injection radius and flowrate led to changes in finger patterns and dominant fingertip velocity.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS
(2021)
Article
Energy & Fuels
Houari Ameur
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION
(2020)
Article
Engineering, Multidisciplinary
Houari Ameur
RESULTS IN ENGINEERING
(2019)
Article
Thermodynamics
Djamel Sahel et al.
APPLIED THERMAL ENGINEERING
(2016)
Article
Thermodynamics
Houari Ameur
Article
Thermodynamics
C Kurtcebe et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2002)
