☆ 4.6 Article

Minimum conditions for accurate modeling of urea production via co-electrolysis

COMMUNICATIONS CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Electrochemical Synthesis of Urea: Co-reduction of Nitric Oxide and Carbon Monoxide

Hao Wan et al.

Summary: This article reveals the possibility of producing urea through the co-reduction reaction of nitrogen oxides and carbon monoxide, and constructs a 2-D activity heatmap to describe the nitrogen conversion to urea. This work provides a clear example of using computational simulations to predict selective and active materials for urea production.

ACS CATALYSIS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Review on Electrocatalytic Coreduction of Carbon Dioxide and Nitrogenous Species for Urea Synthesis

Minghang Jiang et al.

Summary: The electrochemical coreduction of CO2 and nitrogenous species for urea synthesis has great potential for achieving carbon/nitrogen neutrality and reducing environmental pollution. However, challenges such as unsatisfactory Faradaic efficiency, low urea yield rate, and unclear C-N coupling reaction mechanisms hinder its large-scale application. This review presents recent progress, providing guidance for the rational design of metal nanocatalysts, understanding of the C-N coupling reaction mechanism, and exploring future prospects for electrochemical urea synthesis.

ACS NANO (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Mo2P Monolayer as a Superior Electrocatalyst for Urea Synthesis from Nitrogen and Carbon Dioxide Fixation: A Computational Study

Dongxu Jiao et al.

Summary: A new class of two-dimensional nanomaterials, transition-metal phosphide monolayers (TM2P, TM = Ti, Fe, Zr, Mo, and W), were proposed as potential electrocatalysts for urea production. The Mo2P monolayer exhibited the best catalytic activity for urea synthesis due to its small kinetic energy barrier, low limiting potential, and suppressing effects on competing side reactions. The optimal adsorption strength with the key *NCON species on the Mo active sites contributed to the outstanding catalytic activity. These findings not only propose a novel catalyst for urea production but also broaden the potential applications of metal phosphides in electrocatalysis.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Co-electrolysis toward value-added chemicals

Lisong Chen et al.

Summary: Co-electrolysis is an attractive strategy for reducing energy input and producing double value-added chemicals simultaneously. Exciting progress has been made in this area recently, but there are still challenges and opportunities for high value-added product production.

SCIENCE CHINA-MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Direct Electrosynthesis of Urea from Carbon Dioxide and Nitric Oxide

Yanmei Huang et al.

Summary: Electrochemical synthesis of urea is a sustainable strategy that utilizes abundant and low-cost inorganic carbon and nitrogen sources through advanced electrocatalytic processes to achieve efficient urea generation.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Defect Engineered Electrocatalyst that Promotes High-Efficiency Urea Synthesis under Ambient Conditions

Chade Lv et al.

Summary: Indium oxyhydroxide electrocatalyst with defect engineering has been developed for efficient synthesis of urea. By studying the catalytic mechanism, this design strategy may lead to the exploration of advanced catalysts for electrochemical urea synthesis and other sustainable applications.

ACS NANO (2022)

Add to Collection

Article Chemistry, Physical

Carbon-nitrogen bond formation on Cu electrodes during CO2 reduction in NO3- solution

Piotr M. Krzywda et al.

Summary: We demonstrate using Raman spectroscopy that simultaneous reduction of NO3- and CO2 on Cu surfaces leads to the formation of Cu-C---N-like species, which are soluble and result in the restructuring of the Cu surface. These species are associated with reduced or oxidized Cu surfaces and are likely derived from Cu-CO and Cu-NHx intermediates.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Editorial Material Chemistry, Physical

Impact of Intrinsic Density Functional Theory Errors on the Predictive Power of Nitrogen Cycle Electrocatalysis Models

Ricardo Urrego-Ortiz et al.

ACS CATALYSIS (2022)

Add to Collection

Editorial Material Electrochemistry

Cover profile: Gas-phase errors affect DFT-based electrocatalysis models of oxygen reduction to hydrogen peroxide

Michell O. Almeida et al.

Summary: The article illustrates three ways of simulating the energy landscape of oxygen reduction to hydrogen peroxide using density functional theory, and confirms that only the approach with O-2 and H2O2 corrections agrees with experimental results.

CHEMELECTROCHEM (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Construction of C-N bonds from small-molecule precursors through heterogeneous electrocatalysis

Junnan Li et al.

Summary: Energy-intensive thermochemical processes in chemical manufacturing contribute significantly to global CO2 emissions. To achieve sustainability, scientists are developing renewable energy-powered electrochemical technologies as alternatives. This review focuses on the emerging area of heterogeneous electrocatalysis for C-N bond formation.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Article Electrochemistry

On the shifting peak of volcano plots for oxygen reduction and evolution

Elizabeth Sargeant et al.

Summary: DFT calculations often show deviation from experimental equilibrium potentials. These deviations can be minimized through correction schemes. The impact of these errors on Sabatier-type activity plots used in electrocatalysis is not well understood. Gas-phase errors can cause drastic changes in activity plots and even predictions in stark contrast to experimental results.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Engineering, Chemical

Automated versus Chemically Intuitive Deconvolution of Density Functional Theory (DFT)-Based Gas-Phase Errors in Nitrogen Compounds

Ricardo Urrego-Ortiz et al.

Summary: In this study, three correction schemes for PBE-calculated Gibbs energies of formation of 13 nitrogen compounds are analyzed. The results show that by correcting the errors in the NNO and ONO backbones and those in N-O and N-N bonds, the mean and maximum absolute errors are reduced to chemical accuracy. The study demonstrates that combining chemical intuition and automated optimization can swiftly enhance the predictiveness of DFT-GGA calculations of gases.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Gaseous CO2 Coupling with N-Containing Intermediates for Key C-N Bond Formation during Urea Production from Coelectrolysis over Cu

Guo-Lin Yang et al.

Summary: By coelectrolysis of CO2 with nitrogen compounds, molecules containing C-N bonds can be generated and synthesized on Cu(111). It has been discovered that the first C-N bond formation occurs through the coupling of gaseous CO2 with surface-bound N1 intermediates generated during the reduction of NO3-/NO2- to NH3, rather than through intermediates from CO2 electrochemical reduction (CO2ER) to CO. The reaction follows the Eley-Rideal mechanism and only requires a single active site.

ACS CATALYSIS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Progress in Electrocatalytic Urea Synthesis under Ambient Conditions

Zongwei Mei et al.

Summary: This Perspective summarizes the progress and mechanisms of electrocatalytic urea synthesis, focusing on the key steps of chemiadsorption, activation of inert molecules, and C-N coupling, which determine the efficiency and selectivity of the electrocatalytic reactions.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Fast Correction of Errors in the DFT-Calculated Energies of Gaseous Nitrogen-Containing Species

Ricardo Urrego-Ortiz et al.

Summary: The study introduces a semiempirical group-additivity method to correct the errors in DFT calculations for predicting heats of formation of adsorption phenomena on surfaces. After corrections, the mean absolute errors significantly decrease, enabling more accurate predictions of gas-phase compound properties. These functional-group corrections can be utilized in (electro)catalysis for improving accuracy in predicting catalytic activities.

CHEMCATCHEM (2021)

Add to Collection

Article Physics, Condensed Matter

A simple method to calculate solution-phase free energies of charged species in computational electrocatalysis

Laura P. Granda-Marulanda et al.

Summary: Determining the adsorption potential of ions in solution phase is crucial in computational electrocatalysis, and a previously used method utilizing an electrochemical thermodynamic cycle can accurately calculate the reference free energy of ions from gas or solid phases, avoiding the need to model solvent. This method has been shown to be able to reproduce experimental trends in adsorption potentials obtained with DFT calculations.

JOURNAL OF PHYSICS-CONDENSED MATTER (2021)

Add to Collection

Article Chemistry, Analytical

Importance of the gas-phase error correction for O2 when using DFT to model the oxygen reduction and evolution reactions

Elizabeth Sargeant et al.

Summary: The study shows that errors in the total energy of oxygen commonly used in DFT modelling of ORR and OER can have a significant impact on the overall equilibrium potential of the reactions and the energies of individual mechanistic steps. Understanding the reasoning behind the semiempirical corrections for oxygen is important for researching new catalysts with potential limiting steps.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Selective electrocatalytic synthesis of urea with nitrate and carbon dioxide

Chade Lv et al.

Summary: This study presents a more sustainable approach to directly and selectively synthesize urea using an indium hydroxide catalyst under ambient conditions.

NATURE SUSTAINABILITY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Electrocatalytic C-N Coupling for Urea Synthesis

Chen Chen et al.

Summary: The development of green urea synthesis focuses on the direct urea synthesis through electrocatalytic coupling of carbon and nitrogen sources, providing a new pathway to improve resource utilization efficiency. The future direction of electrocatalytic urea synthesis should continue to optimize the synthesis mechanism to achieve higher efficiency and more environmentally friendly synthesis processes.

SMALL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Can sustainable ammonia synthesis pathways compete with fossil-fuel based Haber-Bosch processes?

Miao Wang et al.

Summary: The article evaluates various stages of transitioning to sustainable ammonia synthesis, comparing economic feasibility and climate impacts of different synthesis methods, and suggesting technological thresholds. Ammonia synthesis driven by renewable energy sources will have cost and environmental advantages, but major advances in performance are still needed.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

A Semiempirical Method to Detect and Correct DFT-Based Gas-Phase Errors and Its Application in Electrocatalysis

Laura P. Granda-Marulanda et al.

ACS CATALYSIS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Coupling N2 and CO2 in H2O to synthesize urea under ambient conditions

Chen Chen et al.

NATURE CHEMISTRY (2020)

Add to Collection

Review Chemistry, Physical

Restoring the Nitrogen Cycle by Electrochemical Reduction of Nitrate: Progress and Prospects

Yachao Zeng et al.

SMALL METHODS (2020)

Add to Collection

Editorial Material Chemistry, Physical

Opportunities and Challenges for Renewable Power-to-X

Rahman Daiyan et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrochemical C-N Bond Formation for Sustainable Amine Synthesis

Jeong Eun Kim et al.

TRENDS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Influence of Van der Waals Interactions on the Solvation Energies of Adsorbates at Pt-Based Electrocatalysts

Laura P. Granda-Marulanda et al.

CHEMPHYSCHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of carbon-nitrogen bonds in carbon monoxide electrolysis

Matthew Jouny et al.

NATURE CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

The adhesion energy measured by a stress accumulation-peeling mechanism in the exfoliation of graphite

Minggang Xia et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

Add to Collection

Article Chemistry, Physical

Jacob's Ladder as Sketched by Escher: Assessing the Performance of Broadly Used Density Functionals on Transition Metal Surface Properties

Lorena Vega et al.

JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2018)

Add to Collection

Article Chemistry, Physical

A New Type of Scaling Relations to Assess the Accuracy of Computational Predictions of Catalytic Activities Applied to the Oxygen Evolution Reaction

Ludovic G. V. Briquet et al.

CHEMCATCHEM (2017)

Add to Collection

Review Chemistry, Physical

Kinetic-energy-density dependent semilocal exchange-correlation functionals

Fabio Della Sala et al.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

One- and many-electron self-interaction error in local and global hybrid functionals

Tobias Schmidt et al.

PHYSICAL REVIEW B (2016)

Add to Collection

Article Physics, Multidisciplinary

Strongly Constrained and Appropriately Normed Semilocal Density Functional

Jianwei Sun et al.

PHYSICAL REVIEW LETTERS (2015)

Add to Collection

Article Chemistry, Physical

A benchmark database for adsorption bond energies to transition metal surfaces and comparison to selected DFT functionals

Jess Wellendorff et al.

SURFACE SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

Urea synthesis

Jozef Meessen

CHEMIE INGENIEUR TECHNIK (2014)

Add to Collection

Article Chemistry, Physical

Bulk Properties of Transition Metals: A Challenge for the Design of Universal Density Functionals

Patanachai Janthon et al.

JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2014)

Add to Collection

Article Chemistry, Physical

Choosing a proper exchange-correlation functional for the computational catalysis on surface

Bo-Tao Teng et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Chemistry, Physical

CO and CO2 Hydrogenation to Methanol Calculated Using the BEEF-vdW Functional

Felix Studt et al.

CATALYSIS LETTERS (2013)

Add to Collection

Review Chemistry, Physical

Review of electrochemical ammonia production technologies and materials

S. Giddey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection

Article Chemistry, Physical

Theoretical design and experimental implementation of Ag/Au electrodes for the electrochemical reduction of nitrate

Federico Calle-Vallejo et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Density functionals for surface science: Exchange-correlation model development with Bayesian error estimation

Jess Wellendorff et al.

PHYSICAL REVIEW B (2012)

Add to Collection

Article Chemistry, Physical

Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces

Isabela C. Man et al.

CHEMCATCHEM (2011)

Add to Collection

Article Chemistry, Multidisciplinary

From greenhouse gas to feedstock: formation of ammonium carbamate from CO2 and NH3 in organic solvents and its catalytic conversion into urea under mild conditions

Francesco Barzagli et al.

GREEN CHEMISTRY (2011)

Add to Collection

Article Chemistry, Analytical

Thermodynamic theory of multi-electron transfer reactions: Implications for electrocatalysis

Marc T. M. Koper

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2011)

Add to Collection

Article Chemistry, Multidisciplinary

The Pt(111)/Electrolyte Interface under Oxygen Reduction Reaction Conditions: An Electrochemical Impedance Spectroscopy Study

Alexander S. Bondarenko et al.

LANGMUIR (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Trends in Stability of Perovskite Oxides

Federico Calle-Vallejo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

Add to Collection

Article Chemistry, Multidisciplinary

How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels

Andrew A. Peterson et al.

ENERGY & ENVIRONMENTAL SCIENCE (2010)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Enzymatic versus Inorganic Oxygen Reduction Catalysts: Comparison of the Energy Levels in a Free-Energy Scheme

Christian H. Kjaergaard et al.

INORGANIC CHEMISTRY (2010)

Add to Collection

Article Multidisciplinary Sciences

A safe operating space for humanity

Johan Rockstrom et al.

NATURE (2009)

Add to Collection

Article Multidisciplinary Sciences

Control of Graphene's Properties by Reversible Hydrogenation: Evidence for Graphane

D. C. Elias et al.

SCIENCE (2009)

Add to Collection

Article Multidisciplinary Sciences

An Earth-system perspective of the global nitrogen cycle

Nicolas Gruber et al.

NATURE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Assessing the Perdew-Burke-Ernzerhof exchange-correlation density functional revised for metallic bulk and surface systems

M. Ropo et al.

PHYSICAL REVIEW B (2008)

Add to Collection

Review Environmental Sciences

Escalating worldwide use of urea - a global change contributing to coastal eutrophication

PM Glibert et al.

BIOGEOCHEMISTRY (2006)

Add to Collection

Article Chemistry, Physical

The Perdew-Burke-Ernzerhof exchange-correlation functional applied to the G2-1 test set using a plane-wave basis set

J Paier et al.

JOURNAL OF CHEMICAL PHYSICS (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Interlayer cohesive energy of graphite from thermal desorption of polyaromatic hydrocarbons

R Zacharia et al.

PHYSICAL REVIEW B (2004)

Add to Collection

Article Chemistry, Physical

Origin of the overpotential for oxygen reduction at a fuel-cell cathode

JK Norskov et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2004)

Add to Collection

Article Physics, Multidisciplinary

Climbing the density functional ladder: Nonempirical meta-generalized gradient approximation designed for molecules and solids

JM Tao et al.

PHYSICAL REVIEW LETTERS (2003)

Add to Collection

Article Chemistry, Physical

Hybrid functionals based on a screened Coulomb potential

J Heyd et al.

JOURNAL OF CHEMICAL PHYSICS (2003)

Add to Collection

Article Thermodynamics

The NIST Chemistry WebBook: A chemical data resource on the internet

PJ Linstrom et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2001)

Add to Collection

Article Chemistry, Analytical

Electrochemical synthesis of urea at gas-diffusion electrodes Part VI. Simultaneous reduction of carbon dioxide and nitrite ions with various metallophthalocyanine catalysts

M Shibata et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.