☆ 4.7 Article

Multifunctional Interface Treatment of Phosphate for High-Efficiency Perovskite Solar Cells

ACS APPLIED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Bifunctional modified biopolymer for highly efficient and stable perovskite solar cells and modules

He Guo et al.

Summary: In this study, a sulfonic acid group was introduced into poly-L-lysine (PLL) via a one-step ring-opening reaction to modify the interface between the TiO2 and perovskite layers. The sulfonic acid group in PLLS improved the electron transport layer by reducing oxygen vacancies and defects on the surface of the TiO2 film. Additionally, amine groups passivated deep-level defects on the surface of the perovskite, reducing non-radiative recombination. The modified PLLS significantly increased the power conversion efficiency (PCE) of the solar cell devices and showed good stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Dual-functional electrostatic self-assembly nanoparticles enable suppressed defects and improved charge transport in perovskite optoelectronic devices

Hu Zhang et al.

Summary: Ti3C2Tx MXene quantum dots were synthesized to improve carrier extraction in the electron transport layer/perovskite interface and reduce the defect density of the modified perovskite layer. This resulted in a significant increase in power conversion efficiency of perovskite solar cells from 16.57% to 23.47%, and photodetectors with responsivity approaching 35.54 mA W-1 and response times of 154 ms (rise time) and 120 ms (decay time). The devices also exhibited improved stability under long-term humidity, thermal, and light stress conditions, attributed to enhanced crystallization and suppressed degradation of the perovskite films.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Cerium oxide nanoparticle as interfacial modifier for efficient and UV-stable solar cells

Guo-Bin Xiao et al.

Summary: Ultraviolet (UV) illumination can induce defects at the interface of perovskite and electron transport materials (ETMs) in perovskite solar cells (PSCs), leading to decreased efficiency and stability. In this study, a mesoporous cerium oxide (CeOx) nanoparticle layer was introduced to modify the interface and improve charge transfer. The mesoporous CeOx layer enhanced the efficiency of PSCs and provided UV stability, maintaining 90% of initial efficiency after 850 hours of UV exposure.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Biochemistry & Molecular Biology

MDACl2-Modified SnO2 Film for Efficient Planar Perovskite Solar Cells

Yaodong Xiao et al.

Summary: Researchers propose a facile and effective modification strategy for the electron transport layer (ETL) of perovskite solar cells (PSCs) by incorporating MDACl(2) into the SnO2 precursor colloidal solution. The addition of MDACl(2) effectively passivates the surface defects of the SnO2 film, resulting in increased conductivity and improved electron extraction and transport. The MDACl(2) modification also contributes to the formation of high-quality perovskite films with improved crystallinity and reduced defect density, and achieves a more suitable energy level alignment at the ETL/perovskite interface, leading to enhanced charge transport and improved PSC efficiency and stability.

MOLECULES (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Advantages and challenges of self-assembled monolayer as a hole-selective contact for perovskite solar cells

Songran Wang et al.

Summary: Charge-transporting layers play a crucial role in determining the performance of perovskite solar cells. The use of self-assembled monolayers as charge-selective contacts has many advantages and can improve the efficiency of solar cells.

MATERIALS FUTURES (2023)

Add to Collection

Review Chemistry, Multidisciplinary

From Structural Design to Functional Construction: Amine Molecules in High-Performance Formamidinium-Based Perovskite Solar Cells

Chunpeng Fu et al.

Summary: This study provides a systematic review on the role of amines in formamidinium-based perovskites. The construction mechanism of different structural amines on functional perovskite crystals is analyzed, and the influence of amine molecules on specific perovskite properties is evaluated. The design rules of amine molecules for high-performance formamidinium-based perovskites are summarized, and directions for the future development of additive molecules are proposed.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Engineering, Environmental

Functionalized SnO2 films by using EDTA-2 M for high efficiency perovskite solar cells with efficiency over 23%

Junlei Tao et al.

Summary: Introducing EDTA-2 M molecules to stabilize SnO2 colloids and improve the electrical and surface properties of SnO2 films has successfully increased the electron mobility and quality of SnO2-based perovskite films, leading to suppressed carrier recombination and smaller V-OC loss in high-efficiency PSCs. The champion efficiency and stability of PSCs based on EDTA-2 M modified SnO2 demonstrate the effectiveness of this approach in enhancing the performance of perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Differentiated Functions of Potassium Interface Passivation andDoping on Charge-Carrier Dynamics in Perovskite Solar Cells

Wenjian Shen et al.

Summary: This study investigates the effects of potassium in perovskite solar cells. The results show that potassium doping enhances charge-carrier diffusion and transfer efficiency, and suppresses the formation of wide bandgap perovskite phases.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

Add to Collection

Article Chemistry, Applied

Improving the stability and scalability of all-inorganic inverted CsPbI2Br perovskite solar cell

Chenghao Duan et al.

Summary: In this paper, ultrathin Ti1-xSnxO2 nanoparticles were prepared as an electron transport layer for all-inorganic perovskite solar cells. The improved interface contact of the ultrathin Ti0.9Sn0.1O2 nanocrystals led to enhanced performance and stability. The study demonstrated a promising approach to improve the scalability and stability of perovskite solar cells.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Engineering, Environmental

Modification of SnO2 electron transport Layer: Brilliant strategies to make perovskite solar cells stronger

Shumin Huang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) are a promising photovoltaic technology, and the electron transport layer (ETL) plays a critical role in their performance. SnO2, as an alternative material to TiO2, has been improved in recent years to enhance the performance of PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multifunctional zwitterion modified SnO2 nanoparticles for efficient and stable planar perovskite solar cells

Benyi Li et al.

Summary: In this study, L-carnitine hydrochloride was incorporated into SnO2 nanoparticle solution as the electron transport layer, leading to improved performance of perovskite solar cells. L-carnitine hydrochloride can inhibit the self-aggregation of SnO2 nanoparticles, optimize the energy level alignment between perovskite and SnO2, and repair defects in the perovskite film, resulting in increased efficiency and stability of the solar cells.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Thiourea Competitive Crystallization Strategy for FA-Based Perovskite Solar Cells

Qihang Sun et al.

Summary: This study demonstrates a strategy of embedding thiourea into perovskite solar cells to improve the crystallization process and address the issue of defects. The interaction between thiourea and perovskite significantly reduces the number of defects in the device and enhances the interface contact by bridging bonding, thereby increasing the efficiency and stability of the solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Synergistic bonding stabilized interface for perovskite solar cells with over 24% efficiency

Weili Fan et al.

Summary: The study demonstrates that π-conjugated oxysalt can serve as an effective interfacial binder and defect passivator for stabilizing the SnO2/perovskite interface, leading to improved efficiency and stability of perovskite solar cells.

NANO ENERGY (2022)

Add to Collection

Article Engineering, Environmental

Multifunctional molecule of potassium nonafluoro-1-butanesulfonate for high-efficient perovskite solar cells

Zhaohui Wu et al.

Summary: The rapid development of perovskite solar cell (PSC) has faced challenges in enhancing efficiency and improving stability due to various defects. However, the introduction of KFBS molecules into the SnO2 electron transport layer has shown promising results in tuning energy match, improving quality, and passivating defects, leading to increased efficiency and excellent environmental stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Polymer Science

Overall enhanced properties of high performance semi-crystalline poly (ether ketone)-based multiblock copolymers via thermal treatment for proton exchange membranes

Xin Yang et al.

Summary: A series of multiblock copolymers based on semi-crystalline hydrophobic poly(ether ketone) segments and partially fluorinated hydrophilic poly(arylene ether sulfone) segments were prepared for applications as proton exchange membranes. Through thermal annealing, enhanced nanophase separation and desired membrane properties could be achieved, with increased ion cluster dimensions and significantly improved proton conductivities. Annealed membrane showed superior performance to Nafion 212 at low humidity and wide temperature range.

POLYMER (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Passivation of Perovskite and SnO2 for High-Efficiency MAPbI3 Perovskite Solar Cells

Yali Chen et al.

Summary: A dual-functional method is proposed to simultaneously passivate trap defects in perovskite and ETL films by utilizing Eu3+ in SnO2, leading to significant improvement in electron mobilities of ETLs and open-circuit voltage of PSCs. The PSCs coated on SnO2:Eu3+ ETL achieve a high power conversion efficiency of 20.14% and show minimal degradation when exposed to ambient atmosphere for 84 days.

ADVANCED SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

MAAc Ionic Liquid-Assisted Defect Passivation for Efficient and Stable CsPbIBr2 Perovskite Solar Cells

Linxing Shi et al.

Summary: Precoating a methylammonium acetate (MAAc) ionic liquid onto a TiO2 layer before depositing CsPbIBr2 film improves the crystal quality and interface contact, reduces defects, suppresses nonradiative recombination, and enhances the photovoltaic conversion efficiency.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Highly Tolerant Printing for Scalable and Flexible Perovskite Solar Cells

Zhi Xing et al.

Summary: This study successfully improved the efficiency and air stability of flexible perovskite solar cells by introducing methylammonium acetate as ink assistant and 4-chlorobenzenesulfonic acid as a passivation layer on the perovskite interface.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design of Low Bandgap CsPb1-xSnxI2Br Perovskite Solar Cells with Excellent Phase Stability

Gangshu Chen et al.

Summary: Novel all-inorganic Sn-Pb alloyed perovskites with tunable bandgaps were successfully prepared via low annealing temperature, showing superior stability and champion power conversion efficiency of 10.39%. A novel alpha-phase-stabilization mechanism and dense protection layer formation contribute to improved phase stability and long-term ambient stability against light, heat, and humidity in all-inorganic Sn-Pb perovskite solar cells.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

π-Conjugated Small Molecules Modified SnO2 Layer for Perovskite Solar Cells with over 23% Efficiency

Qiang Lou et al.

Summary: This work presents a new type of SnO2 passivator, which improves the efficiency of perovskite solar cells by optimizing molecular stacking to enhance interfacial characteristics. The impressive power conversion efficiency over 23% achieved with this new passivator is among the highest reported values for triple-cation perovskite systems to date.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

Yuan Cai et al.

Summary: Using the multifunctional molecule DFPDA as an additive, the stability issues of perovskite solar cells have been effectively addressed, resulting in high-quality films with an efficiency of 22.21% and significantly improved stability against moisture, heat, and light.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Improved Efficiency of Perovskite Solar Cells Using a Nitrogen-Doped Graphene-Oxide-Treated Tin Oxide Layer

Ji A. Hong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Red-Carbon-Quantum-Dot-Doped SnO2 Composite with Enhanced Electron Mobility for Efficient and Stable Perovskite Solar Cells

Wei Hui et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Bifacial Passivation with Crosslinked Thioctic Acid for High-Performance Methylammonium Lead Iodide Perovskite Solar Cells

Hui Chen et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells

Eui Hyuk Jung et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Polymer-Regulated SnO2Nanocrystals Enhance Interface Contact for Efficient and Stable Planar Perovskite Solar Cells

Shuai You et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Strain Release from the WS2/CsPbBr3van der Waals Heterostructure for 1.7 V Voltage All-Inorganic Perovskite Solar Cells

Qingwei Zhou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Suppression of the interface-dependent nonradiative recombination by using 2-methylbenzimidazole as interlayer for highly efficient and stable perovskite solar cells

Savas Sonmezoglu et al.

NANO ENERGY (2020)

Add to Collection

Article Energy & Fuels

Low-bandgap mixed tin-lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability

Chongwen Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

Add to Collection

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Add to Collection

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells

Jiangzhao Chen et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

An Ultrathin Ferroelectric Perovskite Oxide Layer for High-Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells

Yinglong Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

High-Performance and Hysteresis-Free Perovskite Solar Cells Based on Rare-Earth-Doped SnO2 Mesoporous Scaffold

Qiyao Guo et al.

RESEARCH (2019)

Add to Collection

Article Multidisciplinary Sciences

A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells

Ligang Wang et al.

SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Critical roles of potassium in charge-carrier balance and diffusion induced defect passivation for efficient inverted perovskite solar cells

Xuewen Yin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced solar cell stability by hygroscopic polymer passivation of metal halide perovskite thin film

Min Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Energy & Fuels

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Nam Joong Jeon et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Thermally stable, planar hybrid perovskite solar cells with high efficiency

Kyoungwon Choi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module

Tongle Bu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

Neha Arora et al.

SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Regular Organic Solar Cells with Efficiency over 10% and Promoted Stability by Ligand- and Thermal Annealing-Free Al-Doped ZnO Cathode Interlayer

Xiaohui Liu et al.

ADVANCED SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation

Jon M. Azpiroz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals

Dong Shi et al.

SCIENCE (2015)

Add to Collection

Article Multidisciplinary Sciences

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells

Cheng Bi et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Multidisciplinary Sciences

Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells

Wei Zhang et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells

Yongsheng Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.