☆ 4.7 Article

Monohalogenated Quinoxaline-Based Nonfullerene Acceptor to Modulate Photovoltaic Performance

ACS APPLIED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

Solid Additive-Assisted Layer-by-Layer Processing for 19% Efficiency Binary Organic Solar Cells

Guanyu Ding et al.

Summary: This study developed a solid additive-assisted layer-by-layer (SAA-LBL) processing to fabricate high-efficiency organic solar cells (OSCs). By adding fatty acid (FA) as a solid additive to the polymer donor PM6 solution, controllable pre-phase separation forms between PM6 and FA, resulting in a desired morphology with refined phase-separated domain and vertical phase-separation structure for better performance. The binary OSCs based on PM6:Y6 blend achieved a champion power conversion efficiency (PCE) of 18.16% with SAA-LBL processing, and this methodology can be applied to other systems as well.

NANO-MICRO LETTERS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Over 19% Efficiency Organic Solar Cells by Regulating Multidimensional Intermolecular Interactions

Chenyu Han et al.

Summary: Research on organic solar cells (OSCs) has focused on material innovation and device engineering. This study investigates the complicated relationship between photovoltaic conversion and multidimensional intermolecular interactions in OSCs. The results emphasize the importance of these interactions in improving the efficiency of OSCs.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Fibrillization of Non-Fullerene Acceptors Enables 19% Efficiency Pseudo-Bulk Heterojunction Organic Solar Cells

Donghui Li et al.

Summary: This study demonstrates the fibrillization of non-fullerene acceptors (NFAs) with the assistance of solvent additive to enhance the performance of organic solar cells (OSCs). The molecular dynamics simulations show that the additive enhances intermolecular packing and induces self-assembly of NFAs into fibril structures. The resulting OSCs show improved power conversion efficiency, light absorption, charge transport, and collection properties.

ADVANCED MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Embedded Host/Guest Alloy Aggregations Enable High-Performance Ternary Organic Photovoltaics

Xiaoning Wang et al.

Summary: The importance of guest distribution in ternary organic solar cells is highlighted in this study, and the primary driving forces to regulate guest distributions are outlined. Optimized internal molecular distributions can maximize the performance of the cells.

ADVANCED MATERIALS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Quinoxaline-Based D-A Copolymers for the Applications as Polymer Donor and Hole Transport Material in Polymer/Perovskite Solar Cells

Chenkai Sun et al.

Summary: This review article summarizes the recent developments of Qx-based D-A copolymer donors, including synthetic methods, backbone modulation, side chain optimization, and functional substitutions. Furthermore, the application of Qx-based D-A copolymers as hole transport material in pero-SCs is also introduced.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Chloride side-chain engineered quinoxaline-based D-A copolymer enabling non-fullerene organic solar cells with over 16% efficiency

Qiang Zhang et al.

Summary: The simple halogenation strategy of side-chains has been proven effective in boosting the photovoltaic performance of organic solar cells. In this study, two novel D-A copolymer donors, PBDTTS-2FQx and PBDTTS-2ClQx, were developed and compared. The PBDTTS-2ClQx with chlorobenzene side chains exhibited redshifted absorption, suppressed energy levels, increased extinction coefficient, and improved electron mobility compared to PBDTTS-2FQx with fluorobenzene side chains. After blending with BTP-eC9, the PBDTTS-2ClQx:BTP-eC9 blend film showed higher and balanced hole/electron mobilities, improved aggregation, reduced charge carrier recombination, and better molecular order. Consequently, the OSCs based on PBDTTS-2ClQx:BTP-eC9 achieved an impressive power conversion efficiency of 16.1%, while the PBDTTS-2FQx-based OSCs only reached 12.2%. Chlorine side-chain engineering of the Qx-based copolymer donors was identified as a simple and effective approach to further enhance their photovoltaic performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Binary Organic Solar Cells Breaking 19% via Manipulating the Vertical Component Distribution

Yanan Wei et al.

Summary: The variation of the vertical component distribution has a significant impact on the photovoltaic performance of organic solar cells. This study demonstrates that sequential deposition of materials can improve the efficiency of solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Central Unit Fluorination of Non-Fullerene Acceptors Enables Highly Efficient Organic Solar Cells with Over 18 % Efficiency

Hongbin Chen et al.

Summary: Halogenation of the central units of state-of-the-art Y-series acceptors has been proven to significantly improve the power conversion efficiencies of organic solar cells. In this study, two acceptors, CH6 and CH4, featuring a conjugation-extended phenazine central unit with and without fluorination, were synthesized. The fluorinated CH6 showed enhanced molecular interactions and crystallinity, superior fibrillar network morphology, and improved charge generation and transport, resulting in a higher power conversion efficiency compared to the non-fluorinated CH4.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Chemistry, Physical

Modulating the molecular orientation of linear benzodifuran-based isomeric polymers by exchanging the positions of chlorine and fluorine atoms

Tingting Dai et al.

Nano Energy (2022)

Add to Collection

Review Chemistry, Multidisciplinary

The principles, design and applications of fused-ring electron acceptors

Jiayu Wang et al.

Summary: Fused-ring electron acceptors (FREAs) with high tunability and excellent properties have revolutionized the field of organic solar cells. FREAs have achieved remarkable efficiencies of over 20% and potential operational lifetimes of up to 10 years.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Peripheral halogenation engineering controls molecular stacking to enable highly efficient organic solar cells

Yalu Zou et al.

Summary: The peripheral halogenation in non-fullerene acceptors affects the molecular stackings and device performances in organic solar cells. The study demonstrates that chloro-substitutions lead to unique intermolecular packing modes and improved device performance. Furthermore, the slight modification of peripheral halogens can boost the power conversion efficiencies of high-performance organic solar cells through delicate molecular stacking control.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Halogenation on the Benzotriazole Unit of Non-Fullerene Acceptors in Organic Solar Cells with High Voltages

Tingting Dai et al.

Summary: Halogenation of the A(1) unit is a promising strategy for developing novel and effective A(2)-A(1)-D-A(1)-A(2)-type NFAs, as it can improve photovoltaic performance by increasing carrier mobility, reducing bimolecular recombination, and enhancing fluorescence quenching rate.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron Acceptor Analogue for Lowering Trap Density in Organic Solar Cells

Yihang Zhang et al.

Summary: The introduction of BTPR as a third component in organic solar cells reduces the trap density, leading to significant improvements in PCE and energy loss. This offers new possibilities for achieving higher efficiency solar cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Non-fullerene polymer solar cells based on quinoxaline units with fluorine atoms

Sangha Keum et al.

Summary: Low bandgap polymers with monofluoroquinoxaline or difluoroquinoxaline as the electron-deficient unit and 2-thiophenylbenzo[1,2-b:4,5-b']dithiophene as the electron-rich unit were synthesized by Stille polymerization. These polymers exhibit good thermal stability and broad absorption band, with the HOMO energy levels affected by the number of fluorine atoms in the conjugated backbone. PB-DFQx:ITIC-based PSC achieved the best power conversion efficiency.

SYNTHETIC METALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Quinoxaline-Based D-A Copolymer Donor Achieving 17.62% Efficiency of Organic Solar Cells

Can Zhu et al.

Summary: Side-chain engineering is a crucial strategy for enhancing the power conversion efficiency of organic solar cells. In this study, two copolymers were designed and synthesized, with PBQ6 exhibiting superior performance and achieving a high efficiency of 17.62% for organic solar cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Fluorination of the Quinoxaline-Based p-Type Polymer and n-Type Small Molecule for High VOC Organic Solar Cells

Hongru Ji et al.

Summary: The study demonstrates the effectiveness of using the same acceptor unit to construct both donor and acceptor materials, achieving high efficiency and higher open-circuit voltage by fine-tuning optoelectronic properties through the introduction of fluorine atoms.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Enhanced photovoltaic performance of quinoxaline-based donor-acceptor type polymers with monocyano substituent

Christyowati Primi Sagita et al.

Summary: A series of quinoxaline-based polymers containing CN groups were synthesized to investigate the effect of strong electron withdrawing CN groups on the photovoltaic properties. The power conversion efficiencies of the devices significantly improved due to the positive contributions of the CN group and alkylthienyl side chains, confirming the great potential for developing high-performance polymers for photovoltaic applications using electron-withdrawing CN groups.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Correlating Charge-Transfer State Lifetimes with Material Energetics in Polymer:Non-Fullerene Acceptor Organic Solar Cells

Yifan Dong et al.

Summary: Reducing the energy offset between the lowest exciton and charge-transfer states can suppress energy loss in polymer:NFA organic solar cells. The study found that as the energy loss decreases, the CT state lifetime decreases as well, indicating increased mixing and hybridization between CT states and shorter-lived singlet excitons. Achieving longer exciton and CT state lifetimes has the potential to enhance OSC efficiencies.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Facile Modification of a Noncovalently Fused-Ring Electron Acceptor Enables Efficient Organic Solar Cells

Jinfeng Huang et al.

Summary: The study introduces two new quinoxaline-based NCAs, QOC6-4H and QOC6-4Cl, with the latter showing improved optical absorption, carrier mobilities, and charge recombination suppression. The device based on PBDB-T:QOC6-4Cl achieved a notable power conversion efficiency and higher short-current density, demonstrating that chlorination of end groups is an effective strategy to enhance intermolecular interactions and photovoltaic performance of NCAs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Multidisciplinary Sciences

Subtle Side Chain Triggers Unexpected Two-Channel Charge Transport Property Enabling 80% Fill Factors and Efficient Thick-Film Organic Photovoltaics

Yonghai Li et al.

Summary: The research demonstrates the significant impact of side chains on the efficiency performance of organic solar cells. Among them, IDIC-C5Ph shows unexpected two-channel pi-pi charge transport property, achieving significant improvements in efficiency and fill factor.

INNOVATION (2021)

Add to Collection

Article Chemistry, Physical

Precise fluorination of polymeric donors towards efficient non-fullerene organic solar cells with balanced open circuit voltage, short circuit current and fill factor

Xiaosha Wang et al.

Summary: The performance of polymer donors Qx-8F, Qx-10F, and Qx-12F improves with higher fluorine content, leading to enhanced open circuit voltage, short circuit current density, and fill factor. The device based on Qx-12F with the most fluorine atoms and non-fullerene acceptor Y6 achieves the highest power conversion efficiency, while further improvement is demonstrated with the optimized ternary device based on the Qx-12F:PM6:Y6 blend.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Optics

High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder

Sha Liu et al.

NATURE PHOTONICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Fluorinated Fused-Ring Electron Acceptor with 3D Stacking and Exciton/Charge Transport

Shuixing Dai et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Importance of Optimal Crystallinity and Hole Mobility of BDT-Based Polymer Donor for Simultaneous Enhancements ofVoc,Jsc, and FF in Efficient Nonfullerene Organic Solar Cells

Jin Su Park et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Polymer Science

Impact of Isomer Design on Physicochemical Properties and Performance in High-Efficiency All-Polymer Solar Cells

Hang Yang et al.

MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Physical

High performance cyano-substituted quinoxaline-based polymers for both fullerene and nonfullerene polymer solar cells

Shinta Lieviana Handoko et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hybridization of Local Exciton and Charge-Transfer States Reduces Nonradiative Voltage Losses in Organic Solar Cells

Flurin D. Eisner et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Multidisciplinary Sciences

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Jun Yuan et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Benzotriazole-Based Acceptor and Donors, Coupled with Chlorination, Achieve a High VOC of 1.24 V and an Efficiency of 10.5% in Fullerene-Free Organic Solar Cells

Ailing Tang et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Multidisciplinary Sciences

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Yong Cui et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fine-Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54%

Zhenghui Luo et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Applied

Tailoring the second acceptor unit in easily synthesized ternary copolymers toward efficient non-fullerene polymer solar cells

Lixin Wang et al.

DYES AND PIGMENTS (2018)

Add to Collection

Article Chemistry, Physical

Optimizing the conjugated side chains of quinoxaline based polymers for nonfullerene solar cells with 10.5% efficiency

Shutao Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

The Introduction of Fluorine and Sulfur Atoms into Benzotriazole-Based p-Type Polymers to Match with a Benzotriazole-Containing n-Type Small Molecule: The Same-Acceptor-Strategy to Realize High Open-Circuit Voltage

Ailing Tang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Recent Development of Quinoxaline Based Polymers/Small Molecules for Organic Photovoltaics

Desta Gedefaw et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Development of quinoxaline based polymers for photovoltaic applications

Jun Yuan et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Energy & Fuels

Fast charge separation in a non-fullerene organic solar cell with a small driving force

Jing Liu et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Spectroscopy

Fourier transform infrared and Raman spectra -: Semi empirical AM1 and PM3; MP2/DZV and DFT/B3LYP-6-31G(d) ab initio calculations for dimethylterephthalate (DMT)

CA Téllez et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.