Related references
Note: Only part of the references are listed.
Article
Multidisciplinary Sciences
Chunqing Ma et al.
Summary: Many studies have been conducted to improve the stability of perovskite films, but the role of different perovskite crystal facets in stability remains unknown. In this study, we investigate the underlying mechanisms of facet-dependent degradation of formamidinium lead iodide (FAPbI3) films. We find that the (100) facet is more susceptible to moisture-induced degradation than the (111) facet. Through experimental and theoretical studies, we uncover the degradation mechanisms and observe a d-phase transition on the (100) facet due to strong water adhesion and elongated lead-iodine (Pb-I) bond distance. Manipulating the crystal structure to achieve a higher fraction of the (111) facet leads to exceptional stability of FAPbI3 films against moisture. Our findings provide insights into unknown facet-dependent degradation mechanisms and kinetics.
Article
Chemistry, Multidisciplinary
Hao Zhang et al.
Summary: The main culprits causing poor stability and non-radiative charge recombination in inorganic perovskite solar cells (PSCs) are identified on the surface of the perovskite material. A new passivator, BMBC, is designed to suppress halide vacancies and coordinate with undercoordinated Pb2+ through Lewis base-acid reactions. This passivation method reduces surface trap density, increases grain size, prolongs charge lifetime, and achieves more suitable energy-level alignment, resulting in increased efficiency and improved stability of the PSCs.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Xuepeng Liu et al.
Summary: In this study, a novel spiro-type HTM named DP was developed by substituting four anisole units on Spiro with 4-methoxybiphenyl moieties, improving the performance of perovskite solar cells. The DP-based PSC achieved high power conversion efficiencies of 25.24% for small-area devices and 21.86% for modules, with a certified efficiency of 21.78% on a designated area. The encapsulated DP-based devices maintained 95.1% of the initial performance after 2560 hours under ISOS-L-1 conditions and 87% under ISOS-L-3 conditions over 600 hours.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Multidisciplinary
Huaxin Wang et al.
Summary: This study investigates the control of crystallization kinetics and halide ion migration in CsPbIBr2 perovskite solar cells through the modulation of chlorobenzene antisolvent and bis(pentafluorophenyl)zinc additive. The addition of Zn(C6F5)2 significantly reduces phase segregation in CsPbIBr2 films, as observed from photoluminescence and absorption spectra. Furthermore, the modified CsPbIBr2 PSCs exhibit a power conversion efficiency of 12.57% with negligible hysteresis and increased stability. Under 1-m-deep water, the PCE of CsPbIBr2 PSCs reaches 14.18%. These findings provide insights into the development of phase-segregation-free CsPbIBr2 films and demonstrate the potential applications of CsPbIBr2 PSCs in underwater power systems.
Article
Multidisciplinary Sciences
Rui He et al.
Summary: All-perovskite tandem solar cells exhibit high power conversion efficiency and low cost. The efficiency improvement in small-area tandem solar cells is driven by advances in low-bandgap perovskite bottom subcells. However, wide-bandgap perovskite top subcells still face issues, especially in large-area tandem solar cells. In this study, a self-assembled monolayer of (4-(7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid is developed as a hole-selective layer for wide-bandgap perovskite solar cells, which enables efficient hole extraction. By integrating this layer, a high efficiency monolithic all-perovskite tandem solar cell with a large area is achieved.
Article
Chemistry, Physical
Hui Zhou et al.
Summary: Surmounting complicated defects at ETL and perovskite interface is crucial for enhancing efficiency and stability of PSCs. An asymmetric interface modification strategy (AIMS) is developed, incorporating 1,3-thiazole-2,4-diammonium (TDA), to passivate defects on both SnO2 ETL and perovskite buried surface. TDA with nitrogen atoms (N3 and N1) in the structure selectively cures different types of defects, resulting in a champion PCE of 24.96% and remarkable operational stability.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Jungang Wang et al.
Summary: It is found that using a compound called DED can effectively reduce defects in CsPbI3 films and suppress ion migration, thereby improving the performance and stability of perovskite solar cells. Experimental results show that CsPbI3 cells treated with DED exhibit excellent performance, with a champion PCE of 21.15%.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Physical
Haofeng Zhang et al.
Summary: CsPbI3 all-inorganic perovskite has better thermal stability than organic-inorganic hybrid counterparts, but suffers from an energy band mismatch with SnO2. By complexing SnO2 nanocrystals with ethoxylated polyethyleneimine (PEIE), the band structure of SnO2 can be adjusted to align with CsPbI3, leading to improved performance. The introduction of PEIE also promotes the growth of CsPbI3 films and enhances charge extraction, resulting in a significantly increased power conversion efficiency. This work provides a simple strategy to produce high-performance CsPbI3 all-inorganic perovskite solar cells with a low-temperature solution process.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Multidisciplinary Sciences
So Min Park et al.
Summary: Interfacing with fluorinated aniliniums can enhance the performance and stability of perovskite solar cells under high temperature and humidity conditions.
Article
Energy & Fuels
Ying Zhou et al.
Summary: The effect of the chemical structure of two new hole transporting materials (HTMs) on their molecular and photovoltaic properties has been studied. One of the HTMs (spiro-cyclOMe) demonstrated higher hole mobility and thermal stability. It also showed better performance in perovskite solar cells (PSCs) with a power conversion efficiency (PCE) of over 23%.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2023)
Review
Materials Science, Multidisciplinary
Xue Tan et al.
Summary: This review discusses the strategies and progress in stabilizing the CsPbI3 perovskite structure and improving the stability of CsPbI3 perovskite solar cells. It covers topics such as ionic incorporation, regulating surface energy, incorporating low-dimensional perovskites, and surface termination. The challenges and opportunities of all-inorganic CsPbI3 perovskite are also briefly mentioned.
Article
Chemistry, Multidisciplinary
Kyoungwon Choi et al.
Summary: This study reports a method to form highly stable CsPbI3 films by introducing ions with different sizes, which can inhibit the formation of the yellow δ-phase and promote the development of the black α-phase. The resulting perovskite solar cells exhibit high efficiency and stability.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Physical
Fanqi Meng et al.
Summary: This study introduces germanium incorporation into the precursor systems of CsPbI3 perovskite solar cells for the first time, and it is found that germanium incorporation can improve the crystallization growth, lower the formation energy, and enhance the power conversion efficiency and operational stability.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Junming Qiu et al.
Summary: This study improved the photovoltaic performance of inorganic perovskite solar cells using surface functionalization with derivatives of cinnamic acid, resulting in significantly suppressed charge carrier recombination, achieving high power conversion efficiency, and demonstrating good stability.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Multidisciplinary
Lu Yang et al.
Summary: A novel compound HADI was designed to improve the efficiency and stability of flexible perovskite solar cells, showing significant roles in surface modification, passivation, and charge transfer. PSCs based on HADI-SnO2 electron transport layer exhibited outstanding performance.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Shan Tan et al.
Summary: The study demonstrates that phenyltrimethylammonium iodide (PTAI) and its corresponding low-dimensional perovskites exhibit excellent thermal stability and effectively suppress non-radiative recombination of CsPbI3, resulting in improved efficiency and stability of PSCs.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Multidisciplinary
Yuhang Che et al.
Summary: By designing new derivatives, the defect density of CsPbI3 films can be reduced, improving the stability and efficiency of solar cells.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Nanoscience & Nanotechnology
Wen-Han Zhang et al.
Summary: In this study, hydrogen octylphosphonate potassium (KHOP) was used as an additive to passivate defects in perovskite films, leading to improved power conversion efficiency. The molecule coordinated with Pb, effectively passivating Pb2+ defects and inhibiting the production of Pb0. The presence of K+ also reduced device hysteresis and improved moisture stability.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Review
Chemistry, Multidisciplinary
Xinhui Luo et al.
Summary: This review summarizes the rapid development and commercialization of perovskite solar cells (PSCs), including the recent progress in device structures, perovskite-based tandem cells, large-area modules, stability, applications, and industrialization. The challenges and perspectives for the commercialization of PSCs in the near future are also discussed.
SCIENCE CHINA-CHEMISTRY
(2022)
Article
Chemistry, Physical
Lei Zhang et al.
Summary: CsPbI3 all-inorganic perovskite has superior thermal stability compared to its organic-inorganic hybrid counterparts. However, it suffers from phase instability when exposed to moisture. By engineering the additives in the hole transport material (HTM), the phase transition of CsPbI3 can be accelerated or mitigated, leading to improved stability and performance of solar cells.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Review
Physics, Multidisciplinary
Chunxiong Bao et al.
Summary: In this article, we review the progress in defect-related physics and techniques for metal halide perovskites. We discuss the impact of defects on device performance and the mechanisms of defect treatment, and summarize the key challenges and opportunities of defects in the further development of perovskite optoelectronic devices.
REPORTS ON PROGRESS IN PHYSICS
(2022)
Article
Chemistry, Physical
Hui Lu et al.
Summary: In this study, the introduction of low concentration of Lewis acid-base adducts (LABAs) is reported to enhance the performance and stability of all-inorganic cesium-lead-iodide (CsPbI3Br3-x (2 < x < 3)) perovskite solar cells. The noncoordinating anions PF6- as a Lewis base effectively passivate iodide vacancy defects, and N-propyl-methyl piperidinium (NPMP+) can regulate crystal growth and decrease trap density. The LABAs strategy improves the power conversion efficiency of CsPbTh3 solar cells to 19.02% and maintains a high efficiency after 60 days of aging.
Article
Chemistry, Physical
Kai-Li Wang et al.
Summary: By employing solvent molecular sieves, a manipulating strategy is demonstrated to simultaneously achieve rapid nucleation and slow crystal growth of perovskite films. This strategy forms a molecular layer on the perovskite surface to control solvent evaporation through molecule-solvent interactions, resulting in improved device performance by effectively passivating surface defects.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Sheng Zhan et al.
Summary: In this study, a bifunctional passivator, MBrA, was designed and used to modify FAMAPbI(3) perovskite material, reducing defect density, tuning energy levels, and improving the efficiency and stability of the solar cell.
ADVANCED ENERGY MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Zhenyu Chen et al.
Summary: All-inorganic CsPbIBr2 perovskite solar cells have attracted worldwide interest due to their excellent thermal stability. This study investigates the passivation effect and band alignment of a rubidium acetate interface layer at the electron transport layer/perovskite and perovskite/hole transport layer interfaces. The introduction of rubidium acetate improves the film quality and electron extraction at the electron transport layer/perovskite interface, and passivates grain boundary defects and reduces nonradiative recombination at the perovskite/hole transport layer interface. The modified solar cells achieve a champion efficiency of 12.11%.
ADVANCED OPTICAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jifeng Yuan et al.
Summary: A novel CsPbI3 precursor with TP-ligands successfully suppresses the formation of V-I defects in the perovskite film, leading to a high-quality film with increased carrier transmission channels, thereby enhancing the efficiency and stability of solar cells.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jingru Zhang et al.
Summary: This study investigates the defect-capture capacity of perovskite material and proposes a method to reduce the defect-capture radius by using highly polarized fluorinated species. By modulating the dielectric properties, the power-conversion efficiency and long-term stability of perovskite solar cells are greatly improved.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Yang Liu et al.
Summary: Inorganic CsPbI3 perovskite has great potential in photovoltaics due to its stability. However, high-temperature annealing for CsPbI3 formation is not compatible with thermally vulnerable substrates. This study presents a low-temperature strategy to remove a byproduct and optimize the material properties.
ACS ENERGY LETTERS
(2022)
Article
Engineering, Environmental
Xianggang Sun et al.
Summary: In this study, two organic molecules were designed and synthesized to modify the perovskite films in order to improve the efficiency and long-term stability of perovskite solar cells. The modified devices showed higher power conversion efficiency and maintained their initial performance after long-term storage.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Shuang Yu et al.
Summary: In this paper, highly ordered lattice arrangements in 2D lead halide perovskites were achieved using the 4,5-dicyanoimidazole (DCI) additive. Through a series of characterization methods, the epitaxial growth of multi-phases was revealed, which effectively reduced trap density and prolonged carrier lifetime.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Materials Science, Multidisciplinary
Shuo Wang et al.
Summary: Through composition engineering, the passivation of iodine vacancies and reduction of defects in CsPbI3 films are achieved by forming strong hydrogen bonds with guanidium (GA(+)) and I-. This method also slows down the crystallization speed and improves the carrier extraction and transportation, resulting in higher power conversion efficiency and open-circuit voltage.
JOURNAL OF MATERIALS CHEMISTRY C
(2022)
Article
Chemistry, Multidisciplinary
Shan Tan et al.
Summary: The study revealed that phenyltrimethylammonium iodide (PTAI) and its corresponding LD perovskites demonstrate excellent thermal stability. Further investigation showed that PTAI-based LD perovskites are mainly distributed at grain boundaries, enhancing the phase stability of CsPbI3 and suppressing non-radiative recombination. As a result, the champion PSC device based on CsPbI3 achieved a record efficiency of 21.0% with high stability.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Multidisciplinary
Yu Zhan et al.
Summary: In this study, a 1D-3D mixed-dimensional perovskite material is explored to address the instability issue caused by ion migration in organic-inorganic hybrid halide perovskite solar cells. The 1D-3D perovskite shows improved stability and enhanced photovoltaic performance by suppressing ion migration and balancing charge carrier extraction.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Chenzhe Xu et al.
Summary: The Lewis acid-base adduct approach has been widely used for high-crystalline perovskite films, but the detailed crystallization process manipulated by Lewis base additives has revealed two distinct crystal growth stages, resulting in retardant crystallization kinetics and improved optoelectronic properties. This provides insight into the precise regulation of perovskite film crystallization kinetics towards high performance.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Nanoscience & Nanotechnology
Bingquan Han et al.
Summary: CsPbI3 inorganic perovskites with ideal bandgap have attracted much interest in solar cells due to their enhanced thermal stability. In this study, the use of the green antisolvent ethyl acetate (EA) in the fabrication process led to improved morphology, crystallinity, and reduced defects in CsPbI3 films compared to other antisolvents. This green antisolvent engineering resulted in efficient CsPbI3 perovskite solar cells with a champion power conversion efficiency of 8.8%, providing a viable way to prepare high-quality CsPbI3 perovskite films for optoelectronic applications.
Article
Chemistry, Multidisciplinary
Shan Tan et al.
Summary: The study introduces an inorganic additive strategy using ammonium halides to improve crystal quality, interfacial contact, and charge transport ability of CsPbI3 films, resulting in high-efficiency solar cell performance. Long-term stability testing shows the promising potential and advantages of this approach.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Ruxue Li et al.
Summary: The encapsulation of CH3NH3PbBr3 perovskite microcrystal with a dense Al2O3 layer creates a microenvironment that allows the structure of the perovskite to self-heal under high temperature and long-time laser illumination, leading to a significant decrease in DLTS density and a 4-14 times enhancement of light emission. This micron-level environment acts as a self-sufficient high-vacuum growth chamber, maintaining excellent thermal stability of the modified structure for up to 2 years. This discovery provides a new perspective for improving the stability of perovskite and has practical implications for perovskite device applications.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Zhun Yao et al.
Summary: The study investigates the impact of deep defects on the performance of all-inorganic CsPbI3-xBrx perovskite solar cells and their formation mechanisms. Experimental results show a significant reduction in defect concentrations after resting, and analysis using density functional theory and reaction thermodynamics reveals related mechanisms.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Jingru Zhang et al.
Summary: The molten-salt-assisted crystallization (MSAC) strategy improves grain growth of all-inorganic perovskite films by changing the crystallization pathways with the introduction of molten salt. This results in high-quality films with desired optical and electrical properties. Compared to traditional solvent annealing, MSAC enables more intensive mass transfer and higher efficiency in producing films with champion steady-state output efficiency and high open-circuit voltage.
ADVANCED MATERIALS
(2021)
Article
Engineering, Environmental
Huimin Xiang et al.
Summary: This review paper focuses on the comprehensive summary of recent advances in developing stable and efficient planar perovskite solar cells (p-PSCs) through materials design, defect control, and interfacial engineering strategies. The underlying origins of stability issues, energy loss, and recent advances in materials development and defect control for p-PSCs are discussed, offering insights for the rational design of highly stable and efficient PSCs.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Multidisciplinary Sciences
Jing Wang et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Cheng Liu et al.
ADVANCED ENERGY MATERIALS
(2020)
Review
Chemistry, Physical
Jingjing Tian et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Hui Bian et al.
Article
Energy & Fuels
Huaxin Wang et al.
Review
Chemistry, Multidisciplinary
Yong Wang et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Xiaoming Chang et al.
ADVANCED MATERIALS
(2020)
Article
Energy & Fuels
Yu Wang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2020)
Article
Multidisciplinary Sciences
Chang Yi et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Min Wang et al.
Article
Energy & Fuels
Huaxin Wang et al.
Article
Chemistry, Multidisciplinary
Zijia Li et al.
Article
Chemistry, Physical
Yi Zhang et al.
Article
Multidisciplinary Sciences
Julian A. Steele et al.
Review
Chemistry, Multidisciplinary
Bo Chen et al.
CHEMICAL SOCIETY REVIEWS
(2019)
Article
Chemistry, Multidisciplinary
Arthur Marronnier et al.
Article
Chemistry, Physical
Rebecca J. Sutton et al.
ACS ENERGY LETTERS
(2018)
Article
Chemistry, Multidisciplinary
Jin-Wook Lee et al.
Article
Chemistry, Physical
Qi Wang et al.
Article
Physics, Applied
Lingbo Xu et al.
APPLIED PHYSICS LETTERS
(2017)
Article
Chemistry, Physical
Xiaojia Zheng et al.
ACS ENERGY LETTERS
(2016)
Article
Multidisciplinary Sciences
Qingfeng Dong et al.
Article
Multidisciplinary Sciences
Dane W. deQuilettes et al.
Article
Chemistry, Physical
Bert Conings et al.
ADVANCED ENERGY MATERIALS
(2015)
Article
Chemistry, Multidisciplinary
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2009)
