☆ 4.7 Article

Multication Anion Exchange Membranes with Robust Chemical Stability and High Conductivity: Effect of the Equatorial Position on Membrane Alkaline Stability

ACS APPLIED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Highly Conducting Poly(arylene-imidazolium) Anion Exchange Membranes Containing Thin-Span Channels Constructed by Cation-Dipole Interaction

Hatam Najafi Fath Dehghan et al.

Summary: In this study, two new anion exchange polymers were synthesized to prepare high ionic conductivity membranes for electrolyzers and fuel cells. The membranes showed high ion conductivity in both water and KOH solutions. This research provides solutions for the drawbacks of the membrane-based alkaline electrolyzer and fuel cell system.

ACS APPLIED POLYMER MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Highly conductive, anti-freezing, and adhesive hydrogels containing pores constructed by cation-dipole interactions

Hatam Najafi Fath Dehghan et al.

Summary: Boosting ion conductivity in anion exchange membranes (AEMs) using dipole-ion interactions is the best way to create ion channels in AEMs. In this study, antifreeze crosslinked PVA/PVP hydrogels were prepared to increase the ionic conductivity by creating multiple pores through cation-dipole interactions. The 10% Cr-PVA hydrogel showed significantly higher ionic conductivity than the PVA hydrogel at room temperature.

JOURNAL OF MOLECULAR LIQUIDS (2023)

Add to Collection

Article Chemistry, Physical

Clustered piperidinium-functionalized poly(terphenylene) anion exchange membranes with well-developed conductive nanochannels

Chenxiao Lin et al.

Summary: In this study, AEMs with clustered ionic groups and ether-bond-free backbone were designed and found to exhibit higher conductivity and lower swelling ratio, showing promising performance in fuel cells.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Soluble poly(aryl piperidinium) with extended aromatic segments as anion exchange membranes for alkaline fuel cells and water electrolysis

Min Liu et al.

Summary: The superacid-catalyzed polymerization and quaternization reaction is an effective method for preparing AEM materials with high conductivity and stability. The PQP-100 AEM shows excellent conductivity, morphology stability, catalytic efficiency, and advantages in membrane thickness.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Poly(fluorene alkylene) Anion Exchange Membranes with Pendant Spirocyclic and Bis-Spirocyclic Quaternary Ammonium Cations

Dong Pan et al.

Summary: Anion exchange membranes (AEMs) functionalized with alicyclic quaternary ammonium cations demonstrate high alkaline stability, thermal stability, mechanical properties, and high conductivity. AEMs prepared with certain cations showed excellent alkaline stability and conductivity, making them suitable for applications in fuel cells and water electrolyzers.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Cross-Linked Alkaline Anion Exchange Membrane from N-Spirocyclic Quaternary Ammonium and Polybenzimidazole

Anupam Das et al.

Summary: In this study, ionically cross-linked alkaline anion exchange membranes (AAEMs) were developed by blending different materials and adding porogen. The resulting membranes showed excellent performance and stability under high temperature and alkaline conditions.

ACS APPLIED POLYMER MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Hydrogen bonding assisted OH- transport under low humidity for rapid start-up in AEMFCs

Wanjie Song et al.

Summary: This study reports an AEM with a urea-based structure that exhibits excellent performance under low humidity conditions. Micro-structure analysis and molecular dynamics simulation show that hydrogen bonding between urea-based structures enhances the self-assembly ability and OH- conduction pathway of the AEM. The hydrogen bond network formed by urea-urea and urea-water groups endows the AEM with excellent water retention ability, reducing the dependence of OH- conduction on humidity. The research provides significant guidance for rapid start-up in AEM fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Cross-Linked Polybenzimidazoles as Alkaline Stable Anion Exchange Membranes

Balakondareddy Sana et al.

Summary: The development of efficient alkaline anion exchange membranes (AAEMs) is important. Cross-linking the polybenzimidazole chains (PyPBI) can improve the physical properties of the polymer, especially the hydroxide ion conductivity, alkaline stability, and mechanical stability.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Dimensionally stable multication-crosslinked poly(arylene piperidinium) membranes for water electrolysis

Xiuqin Wang et al.

Summary: By introducing a multication crosslinker, crosslinked poly(arylene piperidinium)-based AEMs with efficient ion conducting pathways were successfully fabricated, improving both the conductivity and dimensional stability. Alkaline water electrolysis experiments demonstrated the great potential of multication crosslinked AEMs in this field.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Engineering, Chemical

Cation-dipole interaction that creates ordered ion channels in an anion exchange membrane for fast OH- conduction

Jianjun Zhang et al.

Summary: By introducing cation-dipole interactions, the self-assembly of ion-conducting channels in anion-exchange membranes can be enhanced, leading to higher ion conductivity and peak power density.

AICHE JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Chemically & physically stable crosslinked poly(aryl-co-aryl piperidinium)s for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The in-situ styrene-crosslinked c-PAP (x-PAP-PS) membranes exhibit high ion conductivity, mechanical strength, and durability, maintaining stability under harsh conditions. These membranes show improved water retention capacity at low relative humidity and achieve high power densities in AEMFCs.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

New Strategy Based on Click Reaction for Preparation of Cross-Linked Poly(Benzimidazolium-Imide) as an Anion-Exchange Membrane with Improved Alkaline Stability

Koorosh Firouz Tadavani et al.

Summary: New anion-exchange membranes based on poly(benzimidazolium-imide) containing triazolium groups were prepared using click chemistry for triazolium groups and cross-linking simultaneously. Two different cross-linked membranes with a hydrophilic cross-linker (Q-CLP1) and a hydrophobic cross-linker (Q-CLP2) were tested for mechanical properties. Q-CLP1 showed higher tensile stress due to the rigidity of the aromatic cross-linker, while Q-CLP2 had more fixability and tensile strain due to the aliphatic cross-linker.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Multidisciplinary Sciences

Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells

Nanjun Chen et al.

Summary: The study presents a series of durable poly(fluorenyl aryl piperidinium) ionomers and membranes with high OH- conductivity and excellent mechanical properties for improved performance of alkaline fuel cells. Innovative design of poly(fluorenyl aryl piperidinium) copolymers is explored to extend their applications in anion exchange membrane fuel cells.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Chemical

Anion exchange membranes with fast ion transport channels driven by cation-dipole interactions for alkaline fuel cells

Weisheng Yu et al.

Summary: The newly designed PEG-grafted imidazolium-containing flexible-side-chain type anion exchange membrane shows better performance in improving OH- conductivity, enhancing the hydrophilicity of AEMs, and reducing their dependence on relative humidity. The alkaline stability of PEG-grafted AEMs has been improved by reducing the electrophilicity of imidazolium through electrostatic interactions.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Alkaline Anion Exchange Membrane from Alkylated Polybenzimidazole

Balakondareddy Sana et al.

Summary: This study focused on the influence of ion yielding alkyl group structure on the improvement of the alkaline stability and hydroxide conductivity of the alkaline anion exchange membrane (AAEM). Among all the membranes developed, PyPBI alkylated with butyl iodide showed the highest ion exchange capacity and maximum hydroxide conductivity. The results highlighted the significant importance of alkylated moieties structure on the alkaline stability of AAEM.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Polysulfone-polyvinylpyrrolidone blend membranes as electrolytes in alkaline water electrolysis

David Aili et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Electrochemistry

Perfluorinated comb-shaped cationic polymer containing long-range ordered main chain for anion exchange membrane

Xundao Liu et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Imidazolium-Functionalized Fluorene-Based Anion Exchange Membrane (AEM) for Fuel Cell Applications

Umme Salma et al.

CHEMISTRYSELECT (2020)

Add to Collection

Article Chemistry, Physical

Novel self-cross-linked multi-imidazolium cations long flexible side chains triblock copolymer anion exchange membrane based on ROMP-type polybenzonorbornadiene

Changwen Cheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Energy & Fuels

Highly quaternized polystyrene ionomers for high performance anion exchange membrane water electrolysers

Dongguo Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Physical

High Ion Conductivity and Diffusivity in the Anion Exchange Membrane Enabled by Tethering with Multication Strings on the Poly(biphenyl alkylene) Backbone

Lijuan Li et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Increasing the Alkaline Stability of N,N-Diaryl Carbazolium Salts Using Substituent Electronic Effects

Nansi Gjineci et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Chemical

Cyclodextrin modified, multication cross-linked high performance anion exchange membranes for fuel cell application

Lingling Ma et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Changes of Anion Exchange Membrane Properties During Chemical Degradation

Avital Zhegur et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Ether-Free Polybenzimidazole Bearing Pendant Imidazolium Groups for Alkaline Anion Exchange Membrane Fuel Cells Application

Bencai Lin et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A Polyethylene-Based Triblock Copolymer Anion Exchange Membrane with High Conductivity and Practical Mechanical Properties

Nora C. Buggy et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Friedel-Crafts alkylation route for preparation of pendent side chain imidazolium-functionalized polysulfone anion exchange membranes for fuel cells

Tiantian Li et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection

Article Polymer Science

Polybenzimidazole as alkaline anion exchange membrane with twin hydroxide ion conducting sites

Balakondareddy Sana et al.

POLYMER (2019)

Add to Collection

Article Multidisciplinary Sciences

Poly(bis-arylimidazoliums) possessing high hydroxide ion exchange capacity and high alkaline stability

Jiantao Fan et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Engineering, Chemical

Highly conductive anion exchange membranes with long flexible multication spacer

Ling Li et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

A highly durable long side-chain polybenzimidazole anion exchange membrane for AEMFC

Shuai Li et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Self-assembled highly ordered acid layers in precisely sulfonated polyethylene produce efficient proton transport

Edward B. Trigg et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Multi-cation crosslinked anion exchange membranes from microporous Troger's base copolymers

Chuan Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

A benzyltetramethylimidazolium-based membrane with exceptional alkaline stability in fuel cells: role of its structure in alkaline stability

Yuan Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

A Promising Proton-Exchange Membrane: High Efficiency in Low Humidity

Koorosh Firouz Tadavani et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

High-Performing Hydroxide Exchange Membranes with Flexible Tetra-Piperidinium Side Chains Linked by Alkyl Spacers

Hai-Son Dang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Engineering, Chemical

Pyrrolidinium-functionalized poly(arylene ether sulfone)s for anion exchange membranes: Using densely concentrated ionic groups and block design to improve membrane performance

Xue Dong et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Engineering, Chemical

Clustered multi-imidazolium side chains functionalized alkaline anion exchange membranes for fuel cells

Dong Guo et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Polymer Science

Elastic Long-Chain Multication Cross-Linked Anion Exchange Membranes

Juanjuan Han et al.

MACROMOLECULES (2017)

Add to Collection

Article Chemistry, Physical

A comparative study of anion-exchange membranes tethered with different hetero-cycloaliphatic quaternary ammonium hydroxides

Hai-Son Dang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Imidazolium Cations with Exceptional Alkaline Stability: A Systematic Study of Structure-Stability Relationships

Kristina M. Hugar et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Engineering, Chemical

Polybenzimidazoles with pendant quaternary ammonium groups as potential anion exchange membranes for fuel cells

Zijun Xia et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Guanidinium-Functionalized Anion Exchange Polymer Electrolytes via Activated Fluorophenyl-Amine Reaction

Dae Sik Kim et al.

CHEMISTRY OF MATERIALS (2011)

Add to Collection

Review Engineering, Chemical

Anion exchange membranes for alkaline fuel cells: A review

Geraldine Merle et al.

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell

Latifah A. Adams et al.

CHEMSUSCHEM (2008)

Add to Collection

Article Engineering, Chemical

Anion-exchange membranes containing diamines: preparation and stability in alkaline solution

EN Komkova et al.

JOURNAL OF MEMBRANE SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.