☆ 4.7 Article

MWCNT functionalized CF/PEKK composites with optimized EMI shielding and mechanical properties

COMPOSITES COMMUNICATIONS (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Recent progress on multifunctional electromagnetic interference shielding polymer composites

Ke Tian et al.

Summary: The explosive development of electronic devices and wireless communication technology has led to the issue of electromagnetic pollution, and the development of multifunctional EMI shielding materials has emerged to solve this problem. This paper summarizes the basic theory and characterization technologies of EMI shielding, and provides detailed descriptions of seven types of multifunctional EMI shields. The main challenges in the development of multifunctional EMI shielding materials are identified.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Engineering, Multidisciplinary

Simultaneous optimization of the thermal conductivity and mechanical properties of epoxy resin composites through PES and AgNP functionalized BNs

Jiamei Luo et al.

Summary: In this study, polyether sulfone (PES) and silver nanoparticles functionalized boron nitride nanoplates (AgBNs) were used to enhance the thermal conductivity and mechanical properties of epoxy resin (EP) composites. The addition of silver nanoparticles helped increase the interfacial contact of boron nitride nanoplates, improving the heat conduction paths. The results showed that the inclusion of AgBNs significantly increased the thermal conductivity of the composites, and the introduction of PES improved the mechanical properties.

COMPOSITES PART B-ENGINEERING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Simultaneously improving the EMI shielding performances and mechanical properties of CF/PEKK composites via MXene interfacial modification

Xueqin Yang et al.

Summary: In this study, MXene was used to modify the interface of CF/PEKK composites, leading to improvements in EMI shielding performances and mechanical properties. The composites exhibited enhanced EMI shielding effectiveness and improved mechanical properties due to the presence of MXene and its interactions with CF and PEKK.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Engineering, Environmental

Electromagnetic properties of graphene aerogels made by freeze-casting

Le Quan et al.

Summary: This study presents a comprehensive analysis of the electromagnetic properties of graphene aerogel-based shielding materials prepared through freeze casting. The control of freeze casting temperature allows for customization of pore sizes, affecting permittivity and shielding properties. The use of Melamine sponge as a supporting strut during high temperature heat-treatment significantly modifies the performance of the material, resulting in an absorption-dominated shielding material.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Composites

Improved bond strength, reduced porosity and enhanced mechanical properties of 3D-printed polyetherimide composites by carbon nanotubes

Qing Chen et al.

Summary: Fused deposition modelling (FDM) is a fast-developing method for 3D printing polymers and composites. This study focused on using carbon nanotubes (CNTs) to improve the mechanical properties of 3D printed polyetherimide (PEI) composites. The results showed that the incorporation of CNTs significantly enhanced the bond strength and reduced porosity of the composites. Additionally, combining CNTs with annealing further improved the mechanical performance and reduced warping of the printed samples.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Composites

Synergistic effect of multiscale BNs/CNT and 3D melamine foam on the thermal conductive of epoxy resin

Jiamei Luo et al.

Summary: By constructing multiscale synergistic heat conduction channels at a microscopic level and incorporating boron nitride nanoplates/carbon nanotubes into epoxy resin, the thermal conductivity of the epoxy resin can be significantly improved. This method not only enhances the thermal conductivity of the epoxy resin, but also gives it a relatively low dielectric constant, making it suitable for applications in the field of electrical insulation materials.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Manufacturing

Magnetic graphene oxide/carbon fiber composites with improved interfacial properties and electromagnetic interference shielding performance

Baowei Qiu et al.

Summary: In this study, magnetic graphene oxide (MGO) was encapsulated on the surface of carbon fibers to improve the interfacial properties of carbon fiber reinforced composites (CFRPs). The results showed significant improvements in inter laminar shear strength, interfacial shear strength, and transverse fiber bundle tensile strength of the MGO treated CFRPs. Furthermore, the MGO treated CFRPs exhibited excellent electromagnetic interference (EMI) shielding effectiveness in the X-band.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultralight and ordered lamellar polyimide-based graphene foams with efficient broadband electromagnetic absorption

Yawei Zhang et al.

Summary: In this study, a precisely designed and controllably constructed polyimide-based graphene foam with an ordered lamellar structure was developed. The foam exhibits efficient broadband electromagnetic absorption performance, and the absorption properties can be adjusted by optimizing the impedance distribution and microstructure of the foam.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Polyaniline-decorated carbon fibers for enhanced mechanical and electromagnetic interference shielding performances of epoxy composites

Weiwei Kong et al.

Summary: In this study, a mechanically enhanced CF/epoxy composite with highly efficient EMI shielding was fabricated through in-situ polymerization of PANI nanolayer. The composite exhibited improved interfacial adhesion, resulting in significant enhancements in interlaminar shear strength and EMI shielding effectiveness.

MATERIALS & DESIGN (2022)

Add to Collection

Editorial Material Multidisciplinary Sciences

New generation electromagnetic materials: harvesting instead of dissipation solo

Yali Zhang et al.

SCIENCE BULLETIN (2022)

Add to Collection

Article Chemistry, Physical

Synergistically optimizing interlaminar and electromagnetic interference shielding behavior of carbon fiber composite based on interfacial reinforcement

Wei-Wei Kong et al.

Summary: The development of structure-function integrated materials is an important trend in the military field. This study successfully developed a composite material with superior electromagnetic interference shielding property by modifying the resin and carbon fibers.

CARBON (2022)

Add to Collection

Article Materials Science, Composites

Fe3O4 uniformly decorated reduced graphene oxide aerogel for epoxy nanocomposites with high EMI shielding performance

Xueqin Yang et al.

Summary: In this work, Fe3O4@anisotropic reduced graphene oxide aerogel/epoxy (Fe3O4@AGA/EP) nanocomposites were successfully fabricated, showing outstanding electromagnetic interference (EMI) shielding performance and mechanical properties. The Fe3O4@AGA/EP nanocomposites were obtained by one-step hydrothermal reduction method and unidirectional freezing approach to prevent the agglomeration of Fe3O4 and graphene oxide (GO). The research provides a potential solution for the development of EP-based composites with high EMI shielding performance and mechanical properties.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Adjustable core-sheath architecture of polyaniline-decorated hollow carbon nanofiber nanocomposites with negative permittivity for superb electromagnetic interference shielding

Xiaojiang Xu et al.

Summary: This work presents a novel approach to develop hollow carbon nanofibers/polyaniline (HCNFs/PANI) nanocomposites with adjustable core-sheath architecture, negative permittivity, and outstanding electromagnetic interference (EMI) shielding performance. The effect of polyaniline sheath thickness on the electrical property and EMI performance of HCNFs/PANI nanocomposites is studied in detail. Results show that the HCNFs/PANI nanocomposites with a HCNFs loading of 50 wt% exhibit the highest electrical conductivity and the largest EMI shielding effectiveness within the X-band range. The excellent electrical conductivity, changeable dielectric resonance, and internal multiple scattering at interfaces contribute to the unique EMI shielding performance of HCNFs/PANI nanocomposites.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

PAI/MXene sizing-based dual functional coating for carbon fiber/PEEK composite

Xueyu Yuan et al.

Summary: Thermoplastic resins play a significant role in fiber reinforced composites, and interface treatment can enhance the performance of composite materials. This research demonstrates the use of specific sizing to improve interface performance in composite materials.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Simultaneously improved mechanical and electromagnetic interference shielding properties of carbon fiber fabrics/epoxy composites via interface engineering

Shu Zhu et al.

Summary: By using electroless plating and dopamine self-polymerization, the electrical conductivity and strength of carbon fiber reinforced composites were successfully improved, enhancing the interactions between fibers and epoxy matrix. The introduction of dopamine altered the fracture mechanisms of the composites, leading to an enhancement in EMI shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Simultaneously improving mode I and mode II fracture toughness of the carbon fiber/epoxy composite laminates via interleaved with uniformly aligned PES fiber webs

Chao Cheng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Engineering, Manufacturing

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Xutong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Materials Science, Composites

Low-velocity impact behavior of UHMWPE fabric/thermoplastic laminates with combined surface treatments of polydopamine and functionalized carbon nanotubes

Logesh Shanmugam et al.

COMPOSITES COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Preparation and characterisation of nickel-plated carbon fibre/polyether ether ketone composites with high electromagnetic shielding and high thermal conductivity

Shu Li et al.

COLLOID AND POLYMER SCIENCE (2019)

Add to Collection

Article Materials Science, Composites

Making a strong adhesion between polyetherketoneketone and carbon nanotube fiber through an electro strategy

Xueqin Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

Ditungsten carbide nanoparticles embedded in electrospun carbon nanofiber membranes as flexible and high-performance supercapacitor electrodes

Jing Tian et al.

COMPOSITES COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Electrically and Thermally Conductive Carbon Fibre Fabric Reinforced Polymer Composites Based on Nanocarbons and an In-situ Polymerizable Cyclic Oligoester

Ji-un Jang et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Architecture Constructed Using Functionalized MWNT Resulting in Enhanced EMI Shielding in Epoxy/Carbon Fiber Composites

Rani Rohini et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Epoxy Nanocomposites Reinforced with Three-Dimensional Carbon Nanotube Sponge for Electromagnetic Interference Shielding

Yu Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Materials Science, Characterization & Testing

Synergistic improvement of thermal conductivity in polymer composites filled with pitch based carbon fiber and graphene nanoplatelets

Ye Ji Noh et al.

POLYMER TESTING (2015)

Add to Collection

Article Engineering, Multidisciplinary

Design of microwave plasma and enhanced mechanical properties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabric

Hun Su Lee et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Chemistry, Physical

A material with high electromagnetic radiation shielding effectiveness fabricated using multi-walled carbon nanotubes wrapped with poly(ether sulfone) in a poly(ether ether ketone) matrix

Hongsong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.