☆ 4.7 Article

Enhanced electrical conductivity and EMI shielding performance through cell size-induced CNS alignment in PP/CNS foam

COMPOSITES COMMUNICATIONS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Strong and high void fraction PP/CNS nanocomposite foams fabricated by core-back foam injection molding

Long Wang et al.

Summary: Polypropylene/carbon nanostructure (PP/CNS) nanocomposite foams with high void fraction and good mechanical properties were successfully prepared using foam injection molding technique. The addition of carbon nanostructures improved the melt strength and crystallization process of PP, and a high mold temperature overcame the adverse effect of CNS, leading to significantly increased cell density.

JOURNAL OF APPLIED POLYMER SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Biomass-based Co/C@Carbon composites derived from MOF-modified cotton fibers for enhanced electromagnetic attenuation

Jiali Chen et al.

Summary: In this study, a composite material with Co/C particles embedded in carbon networks was synthesized, showing higher electromagnetic interference shielding effectiveness (SE) than pure carbon networks. The remarkable performance is attributed to the aligned carbon networks and the Co/C particles, which can regulate the SE by changing the angle between the fiber orientation direction and the direction of the incident EM-wave electric field and enhance the shielding performance through catalytic graphitization. The composite material has the potential to be used as efficient biomass-based electromagnetic attenuation materials.

CARBON (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A Proof-of-Concept Study of Auxetic Composite Foams with Negative Poisson?s Ratio for Enhanced Strain-Stable Performance of Electromagnetic Shielding

Zhefeng Xu et al.

Summary: A novel strategy of constructing an auxetic structure is proposed to stabilize the EMI shielding effectiveness (EMI SE) of conductive polymer composite (CPC) foams during stretching. Lightweight auxetic polyurethane/carbon nanotube (APU/CNT) composite foams were prepared and showed more stable SE values under tensile strain. The presence of auxetic structure increased the foam thickness and avoided the destruction of conductive networks, resulting in enhanced strain-stable EMI shielding behavior.

ACS MATERIALS LETTERS (2023)

Add to Collection

Article Chemistry, Applied

Cellulose nanofiber reinforced poly (lactic acid) with enhanced rheology, crystallization and foaming ability

Qian Ren et al.

Summary: Adding biodegradable cellulose nanofibers to PLA matrix can significantly improve its crystallization properties and melt elasticity, as well as enhance the foaming behavior of PLA.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Biomass-base d aligne d carbon networks with double-layer construction for tunable electromagnetic shielding with ultra-low reflectivity

Jiali Chen et al.

Summary: Nowadays, carbon frameworks derived from natural biomaterials have gained attention for electromagnetic interference (EMI) shielding. This study fabricates aligned carbon networks from commercial cotton pads through pyrolysis, allowing accurate control of the samples' shielding effectiveness (SE) by adjusting the cross-angle. The further construction of a double-layer structure enhances the SE variation range and achieves ultra-low reflectivity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mold-opening foam injection molded strong PP/CF foams with high EMI shielding performance

Ya Liu et al.

Summary: In this study, carbon fiber was introduced to enhance the crystallization ability and melt viscoelasticity in the foam injection molding process. The use of mold-open foam injection molding technology, combined with carbon fiber, resulted in the production of polypropylene/carbon fiber composites with refined cell size, high cell density, improved mechanical properties, and better fiber distribution uniformity.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

High-performance porous carbon foams via catalytic pyrolysis of modified isocyanate-based polyimide foams for electromagnetic shielding

Zhouping Sun et al.

Summary: By introducing ferric acetylacetonate and carbon-nanotube coating in isocyanate-based aromatic polyimide foams, the severe shrinkage during pyrolysis can be greatly suppressed and the graphitization degree of the final carbon foams can be improved, resulting in better electromagnetic interference (EMI) shielding performance.

NANO RESEARCH (2022)

Add to Collection

Article Materials Science, Composites

Tunable electromagnetic interference shielding performance of polypropylene/carbon black composites via introducing microcellular structure

Minghui Wu et al.

Summary: The effects of filler content and expansion ratio on the cell structure and electromagnetic interference (EMI) shielding performance of conductive polymer composite (CPC) foams were investigated. The results showed that the CB content and expansion ratio influenced the EMI shielding effectiveness (SE) of the foams, but with different trends at different CB contents.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Controllable growth of NiCo compounds with different morphologies and structures on carbon fabrics as EMI shields with improved absorptivity

Yang Li et al.

Summary: High-conductive composite fabrics suffer from high reflectivity, but the addition of NiCo2O4 sheets in CF-NiCo composites showed improved internal absorption loss and reduced surface reflection loss. The CF-NiCo2O4 composite exhibited a shielding effectiveness of 53 dB, reflectivity of -0.85, and absorptivity of -0.15, highlighting the advantages of NiCo2O4 sheets for lightweight, green EMI shielding fabrics.

CARBON (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Tortuosity: A brief review

Marly Terezinha Quadri Simoes da Silva et al.

Summary: Tortuosity plays a significant role in flux transport in porous media. This article provides a brief review of tortuosity and discusses various methods for its determination. The relationship between tortuosity and porosity is also examined through comparisons and presented in graphical and tabular formats. The focus of the article is not on diffusion, but it refers to a study that explains how diffusion can be obtained based on porosity and tortuosity.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Chemistry, Physical

Ti3C2Tx/rGO porous composite films with superior electromagnetic interference shielding performances

Yali Zhang et al.

Summary: The novel method of preparing Ti3C2Tx-based porous EMI shielding composite films with the assistance of graphene oxide resulted in dense surface and porous inside structure, leading to improved EMI shielding effectiveness. The Ti3C2Tx/rGO porous composite films showed superior thermal stability and electrical conductivity, with the potential for application in ultra-thin, light, and flexible EMI shielding materials.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Evaluation and modeling of electrical conductivity in conductive polymer nanocomposite foams with multiwalled carbon nanotube networks

Sai Wang et al.

Summary: The evolution of electrical behavior in conductive filler/polymer composite foams (CPC) was studied, and a novel resistive network model based on Monte Carlo simulation was developed to predict the electrical conductivity of CPC foams. The model results showed that bubble growth significantly affects the conductivity, and can be used for the design and optimization of conductive foams.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Interface Engineered Microcellular Magnetic Conductive Polyurethane Nanocomposite Foams for Electromagnetic Interference Shielding

Guolong Sang et al.

Summary: Lightweight microcellular polyurethane/ carbon nanotubes/nickel-coated CNTs/phase separation polymerizable ionic liquid copolymer composite foams prepared by non-solvent induced phase separation have high electromagnetic shielding effectiveness. Regulation of microcellular structure, conductive network, and microcellular size can enhance the reflection of electromagnetic waves and improve the shielding effectiveness.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Chemistry, Physical

Advances in electromagnetic shielding properties of composite foams

Biao Zhao et al.

Summary: In recent years, the issue of electromagnetic interference (EMI) radiation has become increasingly prominent, leading to the need for high efficiency materials to suppress EMI pollution. Traditional metallic shielding has limitations, while conductive polymer composites (CPCs) have attracted attention for their superior properties. Research on inorganic-based and polymer composite foams as EMI shielding materials will likely be the focus for future development.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption

Peitao Xie et al.

Summary: This study prepared Co/C nanocomposites with Co nanoparticles uniformly distributed in amorphous carbon sheets, achieving excellent absorption performance through hierarchical porous microstructures. Excellent absorption performance was achieved at 10% and 15% Co/C content levels, providing a new pathway for designing ultralight absorbers.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Enhancing the electrical conductivity of PP/CNT nanocomposites through crystal-induced volume exclusion effect with a slow cooling rate

Jun Wang et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Materials Science, Composites

Ultra-lightweight, super thermal-insulation and strong PP/CNT microcellular foams

Jinchuan Zhao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Composites

Theoretical modeling and experimental verification of percolation threshold with MWCNTs' rotation and translation around a growing bubble in conductive polymer composite foams

Sai Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Investigating the effects of metallic submicron and nanofilms on fiber-reinforced composites for lightning strike protection and EMI shielding

R. Asmatulu et al.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Ultra-stretchable membrane with high electrical and thermal conductivity via electrospinning and in-situ nanosilver deposition

Xiaohui Lv et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dependence of electromagnetic interference shielding ability of conductive polymer composite foams with hydrophobic properties on cellular structure

Biao Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Electrical conductivity and electromagnetic interference shielding of epoxy nanocomposite foams containing functionalized multi-wall carbon nanotubes

Jiantong Li et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Polymer Science

Modelling of Rod-Like Fillers' Rotation and Translation near Two Growing Cells in Conductive Polymer Composite Foam Processing

Sai Wang et al.

POLYMERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Electrical and Electromagnetic Interference Shielding Properties of Polymer-Graphene Nanoplatelet Composites Fabricated via Supercritical-Fluid Treatment and Physical Foaming

Mandi Hamidinejad et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Polymer Science

Comparative study of singlewalled, multiwalled, and branched carbon nanotubes melt mixed in different thermoplastic matrices

Beate Krause et al.

POLYMER (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Compressible Graphene-Coated Polymer Foams with Ultralow Density for Adjustable Electromagnetic Interference (EMI) Shielding

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Engineering, Manufacturing

Experimental observation and modeling of fiber rotation and translation during foam injection molding of polymer composites

Vahid Shaayegan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Nanoporous polymeric materials: A new class of materials with enhanced properties

B. Notario et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference Shielding

Aboutaleb Ameli et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Chemistry, Physical

Highly ordered porous carbon/wax composites for effective electromagnetic attenuation and shielding

Wei-Li Song et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold

A. Ameli et al.

CARBON (2014)

Add to Collection

Article Chemistry, Physical

Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams

A. Ameli et al.

CARBON (2013)

Add to Collection

Article Materials Science, Composites

Through-plane electrical conductivity of injection-molded polypropylene/carbon-fiber composite foams

A. Ameli et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Composites

Electrical conductivity of polyurethane/MWCNT nanocomposite foams

N. Athanasopoulos et al.

POLYMER COMPOSITES (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Ultralight conductive carbon-nanotube-polymer composite

Xiang-Bin Xu et al.

SMALL (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam

M Okamoto et al.

NANO LETTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.