☆ 4.7 Article

An Efficient Solution-Processed Interconnecting Layer for Large-Area Tandem Organic Solar Cells

SOLAR RRL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

A Wide Bandgap Acceptor with Large Dielectric Constant and High Electrostatic Potential Values for Efficient Organic Photovoltaic Cells

Jingwen Wang et al.

Summary: Low-bandgap materials have rapidly developed and improved the power conversion efficiencies of organic photovoltaic cells. However, the design of wide-bandgap non-fullerene acceptors (WBG-NFAs), necessary for indoor applications and tandem cells, has been lagging behind. In this study, two NFAs named ITCC-Cl and TIDC-Cl were successfully designed and synthesized. TIDC-Cl demonstrated a wider bandgap and higher electrostatic potential compared to ITCC and ITCC-Cl, resulting in efficient charge generation and a high PCE of 13.8% in PB2:TIDC-Cl-based cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2023)

Add to Collection

Article Multidisciplinary Sciences

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Zhenrong Jia et al.

Summary: Reducing energy loss of sub-cells is critical for high performance tandem organic solar cells. Here, the authors design and synthesize an ultra-narrow bandgap acceptor through replacement of terminal thiophene by selenophene in the central fused ring, achieving efficiency of 19% for tandem cells.

NATURE COMMUNICATIONS (2023)

Add to Collection

Article Multidisciplinary Sciences

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses

Jianqiu Wang et al.

Summary: Tandem organic solar cells with recorded efficiency are achieved by implementing the ternary strategy to simultaneously reduce energy disorder and non-radiative voltage losses. This work demonstrates that decreasing the voltage losses by ternary strategy and constructing tandem architecture are effective approaches towards improving photovoltaic performance.

NATIONAL SCIENCE REVIEW (2023)

Add to Collection

Article Chemistry, Multidisciplinary

An asymmetric wide-bandgap acceptor simultaneously enabling highly efficient single-junction and tandem organic solar cells

Jianqiu Wang et al.

Summary: Ternary and tandem strategies were used to improve the photovoltaic performance of organic solar cells (OSCs). A nonfullerene acceptor named AITC was synthesized and showed good complementary absorption spectrum and miscibility with another acceptor BTP-eC9. The large dipole moment of AITC enhanced the molecular packing in the blend films, improving the photoconductivity and reducing charge recombination in ternary OSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Tandem Organic Solar Cell with 20.2% Efficiency

Zhong Zheng et al.

Summary: A advanced interconnecting layer for tandem organic solar cell is developed in this study. By controlling the O-2 flux during evaporation, efficient electron extraction and low Schottky barrier are obtained, enabling effective charge recombination between two subcells. The tandem cell with the interconnecting layer shows a high efficiency of 20.27%.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

Add to Collection

Article Energy & Fuels

An alcohol-dispersed conducting polymer complex for fully printable organic solar cells with improved stability

Youyu Jiang et al.

Summary: Researchers have developed an alcohol-dispersed PEDOT formulation for efficient and stable organic solar cells. The formulation shows good wetting properties and low acidity, avoiding the drawbacks of aqueous PEDOT:PSS. Organic photovoltaics based on PEDOT:F achieved a power conversion efficiency of 15% and retained 83% of the initial efficiency after 1,330 hours of continuous illumination.

NATURE ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Effect of Wetting Surfactants on the Work Function of PEDOT:PSS for Organic Solar Cells

Xianmin Zhou et al.

Summary: This study demonstrates that fluorine-containing surfactants can improve the film quality and work function of aqueous PEDOT:PSS on hydrophobic active layers, thereby influencing the device performance.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

The principles, design and applications of fused-ring electron acceptors

Jiayu Wang et al.

Summary: Fused-ring electron acceptors (FREAs) with high tunability and excellent properties have revolutionized the field of organic solar cells. FREAs have achieved remarkable efficiencies of over 20% and potential operational lifetimes of up to 10 years.

NATURE REVIEWS CHEMISTRY (2022)

Add to Collection

Review Energy & Fuels

Ternary organic solar cells featuring polythiophene

Qingchun Qi et al.

Summary: Organic photovoltaic (OPV) cells are booming with the help of new photovoltaic materials and innovations in device architectures. Polythiophene, a promising polymer donor, is gaining attention for its simple chemical structure and excellent charge transport abilities. Ternary mixing has been recognized as a simple and effective method for improving the efficiency and stability of OPVs.

ENERGY MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

Zhenrong Jia et al.

Summary: The study demonstrates a simple strategy of extending the conjugation length of acceptor Y6 to synthesize a new narrow bandgap acceptor BTPV-4F, which shows great potential in tandem organic solar cells. By using BTPV-4F in the rear cell, tandem devices achieved a high power conversion efficiency of over 16.4% with good photostability, addressing previous limitations in near-infrared absorbing materials for tandem organic solar cells.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Non-Halogenated-Solvent Processed and Additive-Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Shucheng Qin et al.

Summary: This study successfully fabricated high-performance tandem OSCs using solution processing with non-halogenated solvents without additives. The two active layers showed better phase segregation and charge transport properties, leading to an efficiency of up to 16.67%.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub-Cell

Gongchu Liu et al.

Summary: By developing an efficient interconnecting layer and adjusting the composition of the active layer, the research achieved an efficient TOSC with a high fill factor and excellent PCE.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Jianqiu Wang et al.

Summary: This study fabricated highly efficient double-junction tandem OPV cells by optimizing the photoactive layers and developing an effective method to tune optical field distribution. By fine-tuning the top photoactive layer, a PCE of 19.64% was achieved, the highest in the OPV field and certified as 19.50% by the National Institute of Metrology.

ADVANCED MATERIALS (2021)

Add to Collection

Review Energy & Fuels

Non-fused ring acceptors for organic solar cells

Mingqun Yang et al.

Summary: Organic solar cells (OSCs) have seen rapid advancements in power conversion efficiencies with the emergence of non-fused ring acceptors (NFRAs) as potential replacements for the complex and costly multiple fused ring acceptors (NFAs). Challenges and future directions are discussed to achieve high performance and low synthetic complexity simultaneously in the development of new NFRAs for practical application in OSCs.

ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Advances of Synthesis, Properties, Film Fabrication Methods, Modifications of Poly(3,4-ethylenedioxythiophene), and Applications in Solution-Processed Photovoltaics

Youyu Jiang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling High-Performance Tandem Organic Photovoltaic Cells by Balancing the Front and Rear Subcells

Pei Cheng et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Robust metal ion-chelated polymer interfacial layer for ultraflexible non-fullerene organic solar cells

Fei Qin et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Energy & Fuels

Incorporation of Hydrogen Molybdenum Bronze in Solution-Processed Interconnecting Layer for Efficient Nonfullerene Tandem Organic Solar Cells

Wenwu Zeng et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Physical

15% Efficiency Tandem Organic Solar Cell Based on a Novel Highly Efficient Wide-Bandgap Nonfullerene Acceptor with Low Energy Loss

Gongchu Liu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells

Pei Cheng et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

A generic surfactant-free approach to overcome wetting limitations and its application to improve inkjet-printed P3HT:non-fullerene acceptor PV

Philipp Maisch et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%

Yamin Zhang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Organic and solution-processed tandem solar cells with 17.3% efficiency

Lingxian Meng et al.

SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells

Wenchao Huang et al.

NANO LETTERS (2018)

Add to Collection

Article Optics

Solution-processed organic tandem solar cells with power conversion efficiencies >12%

Miaomiao Li et al.

NATURE PHOTONICS (2017)

Add to Collection

Article Chemistry, Physical

Flexible large-area organic tandem solar cells with high defect tolerance and device yield

Lin Mao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Energy & Fuels

High-Efficiency Organic Tandem Solar Cells With Effective Transition Metal Chelates Interconnecting Layer

Sheng-Yung Chang et al.

SOLAR RRL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Polymer Tandem Solar Cells Employing a New n-Type Conjugated Polymer as an Interconnecting Layer

Kai Zhang et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible all-solution-processed all-plastic multijunction solar cells for powering electronic devices

Jinhui Tong et al.

MATERIALS HORIZONS (2016)

Add to Collection

Letter Optics

Characterization of tandem organic solar cells

Ronny Timmreck et al.

NATURE PHOTONICS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Highly efficient organic tandem solar cells: a follow up review

Tayebeh Ameri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Review Chemistry, Multidisciplinary

The Modification of Indium Tin Oxide with Phosphonic Acids: Mechanism of Binding, Tuning of Surface Properties, and Potential for Use in Organic Electronic Applications

Peter J. Hotchkiss et al.

ACCOUNTS OF CHEMICAL RESEARCH (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells

Desalegn Alemu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells

WJE Beek et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.