Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Yifei Wang et al.
Summary: The N-doped carbon wrapped porous FeS0.5Se0.5 nanorods (FeS0.5Se0.5@NC) are successfully designed using FeOOH nanorods, poly-dopamine, sulfuration, and selenization processes. The FeS0.5Se0.5@NC exhibits remarkable sodium storage properties in room-temperature sodium ion batteries due to the cooperative effect of dual-anion guided hetero-structure and the protection of the N-doped carbon layer. It shows satisfied specific capacity, long-period cycling stability, and prominent rate capability, even at low temperatures.
APPLIED SURFACE SCIENCE
(2023)
Article
Chemistry, Multidisciplinary
Yan Liu et al.
Summary: Antimony (Sb) is encapsulated into a carbon matrix to mitigate volume expansion during cycling in sodium-ion batteries. A yolk-shell Sb@Void@graphdiyne (GDY) nanobox with three-dimensional Na+ transport channels is synthesized, enabling fast Na+ diffusion. The Sb@Void@GDY nanobox exhibits excellent rate capability and cycling stability.
Article
Engineering, Environmental
Cheng Zheng et al.
Summary: This paper proposes a new strategy to improve the storage of sodium ions in walnut shell-derived hard carbon by adjusting the ratio of different carbon phases. The optimized sample WSC-1200 exhibits a high reversible capacity and promising high-speed cycling performance. The assembled WSC-1200//Graphite SDIB shows an ultra-long cycle life and extremely high energy density.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Multidisciplinary
Chao-Hung Chang et al.
Summary: Metal oxide anodes have poor electrochemical performance in potassium ion batteries due to their wide band gaps and deficient ion-transport kinetics. In this study, crystal facet and architecture engineering of metal oxides are used to enhance the potassium ion storage performance. The nanonetwork anodes of bismuth antimonate show outstanding capacity, cycling life, and rate capability. This study proposes a promising avenue to design advanced hierarchical nanostructures for potassium ion batteries and hybrid capacitors.
Article
Chemistry, Multidisciplinary
Wei Zong et al.
Summary: The study successfully constructed an expanded 2D rhenium selenide intercalated by nitrogen-doped carbon hybrid with a strong-coupled interface and weak van der Waals forces, improving conductivity and accelerating reaction kinetics. Results showed that the hybrid capacitor has enhanced rate capability and long-term cyclability, as well as favorable sodium storage kinetics, making it applicable in a wide temperature range.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Multidisciplinary Sciences
Yangjie Liu et al.
Summary: A source-template synthetic strategy was used to fabricate carbon-coated nanowire-in-nanotube structures, termed nanocables. Among them, MoS1.5Te0.5@C nanocables showed promising performance as negative electrode active material in dual-ion batteries, with prolonged cycling lifespan and high reversible capacity.
NATURE COMMUNICATIONS
(2022)
Article
Chemistry, Physical
Ke Chu et al.
Summary: In this study, vacancy and heterostructure engineering were integrated to develop O-vacancy-rich MoO3-x anchored on Ti3C2Tx-MXene as a highly active and selective NRR electrocatalyst. Experimental results demonstrated exceptional NRR activity, increased NH3 yield, and Faradaic efficiency for the catalyst.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yuhao Yi et al.
Summary: In this study, polypyrrole-encapsulated VSe2 nanoplates were synthesized and demonstrated to have enhanced sodium/potassium-storage performances. The VSe2@PPy nanoplates exhibited superior rate capability and cycling stability, making them a promising candidate for sodium/potassium-ion batteries.
Article
Chemistry, Multidisciplinary
Henghan Dai et al.
Summary: This study successfully constructed a self-supported thick electrode using an ice crystallization-induced strategy, which utilizes vertically aligned two-dimensional heterostructures (V-MXene/V2O5) to enhance electron/ion transport speed within the electrode and provides mechanical stability with the MXene scaffold. The optimized electrodes showed promising performance and cycling stability.
Article
Engineering, Environmental
Yanli Zhou et al.
Summary: In this study, N, P co-doped carbon network modified 1T/2H-MoS2 heterostructures were fabricated and showed excellent cycling performance and rate capability. The results suggest the prospects of using 1T/2H-MoS2@PNC as high-performance anode materials for large-scale energy storage.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Tao Gu et al.
Summary: Interface engineering is an effective strategy to optimize the electronic properties of MoS2, resulting in improved electrochemical performance of lithium-ion batteries. In this study, a carbon cloth decorated with a MoS2/ZnS-NC heterostructure was designed, where ZnS with N-doped carbon (ZnS-NC) was derived from zeolitic imidazolate framework-8 (ZIF-8) carbonation. The MoS2/ZnS-NC@CC heterostructure showed abundant heterointerfaces, high conductivity, and N heteroatom doping, leading to enhanced electron/ion diffusion kinetics and improved electrochemical performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2022)
Article
Engineering, Environmental
Xuejiao Hu et al.
Summary: This study successfully enhances the electrical conductivity and electrochemical reaction kinetics of MoSe2 for sodium/potassium storage by vertically in situ growing MoSe2 on graphene substrate and introducing a Sn catalyst. It achieves efficient reversible capacities with outstanding performance in sodium ion batteries and potassium ion batteries, even at high current densities.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Jingui Zong et al.
Summary: Sodium-ion batteries and Sodium dual-ion batteries have received much attention due to their low cost, abundant sodium resources, and environmental friendliness. In this study, a new type of anode material was designed by Te atom doping and double carbon coating process, which significantly improved the performance and cyclic stability of sodium-ion batteries.
JOURNAL OF POWER SOURCES
(2022)
Review
Chemistry, Multidisciplinary
Zhiqiang Hao et al.
Summary: This review analyzes the sodium-storage mechanisms of different metal selenides and discusses the specific challenges and corresponding modification strategies for metal selenides as sodium-ion battery anodes. Recent advances and potential research directions are also presented. The review aims to provide constructive comments on the optimization and large-scale application of high-performance metal selenide-based anodes for sodium-ion batteries.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Physical
Yanli Zhou et al.
Summary: Sodium and potassium ions batteries (SIBs, PIBs) have attracted wide concerns as the ideal substitutes for lithium-ion batteries (LIBs) used in large-scale energy storage, thanks to their similar working principle to LIBs, rich abundance, and low cost. However, the shortage of suitable anode materials poses a key challenge in the field of Na+/K+ storage. Molybdenum chalcogenides have drawn great attention as anode materials for SIBs/PIBs due to their special electronic/crystal structures and high specific capacities. However, their volumetric fluctuation and low electrical conductivity are the main obstacles that hinder their performance.
ENERGY STORAGE MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Yongpeng Li et al.
Summary: In this study, flexible fiber-shaped sodium dual-ion batteries with high energy density and stability are fabricated, and the reversible shuttling of ions between the anode and cathode during charge and discharge is achieved.
ENERGY & ENVIRONMENTAL MATERIALS
(2022)
Article
Engineering, Environmental
Yanli Zhou et al.
Summary: 1 T-MoS2/MoOx@NC modified by hierarchical N-doped carbon exhibits excellent rate capability and long-term cycle life as an anode material for potassium-ion batteries. Additionally, it shows high reversible capacity and outstanding cyclic stability as an anode material for sodium-ion batteries.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Xuepeng Ni et al.
Summary: In this study, three types of flexible 3D-interconnected carbon nanofibers were prepared and used as substrates for vertically grown ultrathin MoSe2 nanosheets. The resulting composites were employed as freestanding anodes for lithium-ion batteries, with the hollow multi-nanochannel structure of NHMCFs delivering the highest capacity after 400 cycles at 1 A g-1. The multi-nanochannel structure in NMCFs and NHMCFs helps alleviate volume changes during charge-discharge processes, while the uniform coating of MoSe2 nanosheets on NHMCFs increases mass loading and capacity.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Xirong Lin et al.
Summary: A novel microcapsule system with stable magnesium storage performance for magnesium battery cathodes is prepared using a liquid-driven coaxial flow focusing approach. The MoS2-filled microcapsules display high performance and stable cycling performance at various temperatures. This method is versatile and could find broad applications in emerging energy storage materials and secondary battery systems.
Article
Nanoscience & Nanotechnology
Xiaoyan Wang et al.
Summary: Heteroatom-doped hard carbon, particularly phosphorus-doped hollow carbon nanorods (P-HCNs), has been shown to significantly improve the electrochemical performance of anode electrodes for sodium-ion batteries. By controlling the configuration of phosphorus, the P-HCNs exhibit high reversible capacity and initial Coulombic efficiency. The strong Na-absorption ability of P=O and P-C bonds contribute to the excellent performance of the electrode, leading to a high energy density in sodium-based dual-ion batteries.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Multidisciplinary
Long Yao et al.
Summary: This study presents a novel aerogel structure of MOFs@MXene to prevent aggregation of MXene nanosheets and enhance conductivity, as well as a (CoS NP@NHC)@MXene composite with excellent electrochemistry properties for use in lithium-ion, sodium-ion, and potassium-ion batteries. The hybrid system shows outstanding cycle stability, high capacities, and enhanced charge transfer kinetics, suggesting potential for practical electrochemical energy storage devices.
Article
Chemistry, Multidisciplinary
Hyojun Lim et al.
Summary: This study successfully synthesized a high-performance N-MoS2/C@SiOC composite material with a hierarchically designed core-shell heterostructure, exhibiting excellent reversible capacity, high capacity retention, and outstanding rate capability. The strategy developed in this study allows for the fabrication of high-performance metal sulfide anodes and other high-capacity anode materials for energy storage applications.
Article
Chemistry, Multidisciplinary
Dong Yan et al.
Summary: Zinc sulfide shows potential in sodium-ion batteries due to its low voltage and high capacity, but faces challenges in fast and stable sodium storage. The incorporation of indium as a remedy enhances the electrochemical performances of zinc sulfide by improving kinetics and stability. The developed full cell with superior electrochemical performance based on the ZnIn2S4 anode provides an effective tactic for high-performance alkali-ion batteries.
Article
Chemistry, Physical
Fang Wang et al.
Summary: The study presents a hierarchical nanostructure composed of N, P-codoped hollow carbon nanocomposites and WSe2 nanosheets, offering an attractive avenue for energy storage and conversion applications. The typical hollow structure provides abundant reaction sites and diffusion paths, while the carbon substrate enhances electric conductivity and alleviates aggregation of the nanosheets, resulting in excellent rate capability and cyclic stability of the electrode.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Lidong Xing et al.
Summary: The engineered interlayer spacing of two-atom-layered WSe2/C ultrathin crumpled nanosheet assemblies provides a new type of anode with optimal electrochemical performance for nonaqueous potassium-ion batteries. The anode offers advantages such as more active sites, reduced volume expansion, accelerated ion diffusion, and high specific capacity, along with excellent cycling stability.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Qinghua Li et al.
Summary: The study introduces an ultrafine antimony embedded in a porous carbon nanocomposite for sodium storage, showcasing excellent specific capacities and redox potential due to the use of a metal-organic framework-derived carbon framework. The materials exhibit a high level of reversibility during sodium insertion/extraction cycles, allowing for promising applications in advanced secondary batteries.
Article
Chemistry, Multidisciplinary
Jun Mei et al.
Summary: This study proposes a novel concept of enhancing the electrochemical performance by opening three-dimensional fast ion transport channels within the NTO frameworks, achieved through a combination of oxygen vacancy generation and cation substitution strategies. The oxygen-deficient and bismuth-substituted HBNTO exhibits significant enhancements in reversible capacity, rate capability, and cycling stability, attributed to the successful opening of 3D internal ion transport channels.
Review
Chemistry, Multidisciplinary
Qingguang Pan et al.
Summary: This review discusses the energy storage mechanism, challenges, and design strategies of metal sulfides (MSx) in rechargeable sodium/potassium-ion batteries, addressing the performance limitations faced by MSx. Various design strategies for improving the comprehensive electrochemical performance of SIBs/PIBs using MSx are highlighted, with prospects for overcoming imminent challenges and predicting future directions in the field.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Runtian Zheng et al.
Summary: The sodium dual ion battery technology, with high diffusion coefficients and low diffusion barriers, shows promising potential as an alternative to lithium-ion batteries for next-generation high-performance stationary energy storage systems.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Multidisciplinary
Xiang Hu et al.
Summary: The study showed that MnSAs/NF-CNs have dual features that significantly improve the energy/power density of SIHCs (up to 197 W h kg(-1)/9350 W kg(-1)) and achieve an ultra-long cycling life of over 10,000 cycles.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Chemistry, Multidisciplinary
Yongpeng Cui et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Chemistry, Physical
Jun Dong et al.
Article
Chemistry, Multidisciplinary
Jinzhi Sheng et al.
Article
Chemistry, Physical
Xiaojuan Jiao et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Article
Chemistry, Physical
Xiaochuan Ren et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Chemistry, Multidisciplinary
Hanna He et al.
Article
Chemistry, Physical
Qiong Su et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Multidisciplinary
Lianshan Sun et al.
Article
Chemistry, Multidisciplinary
Shucheng Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2018)
Article
Electrochemistry
Xiaohong Wang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2017)
Article
Chemistry, Physical
Wanfeng Yang et al.
Article
Chemistry, Physical
Yuan-En Zhu et al.
ADVANCED ENERGY MATERIALS
(2017)
Article
Chemistry, Physical
Shengyang Dong et al.