Related references
Note: Only part of the references are listed.
Article
Nanoscience & Nanotechnology
Sha Tan et al.
Summary: Accurate understanding of the chemistry of solid-electrolyte interphase (SEI) is crucial for developing new electrolytes for high-energy batteries with lithium metal (Li-0) anodes. Our study reveals a more complex formation mechanism of SEI, involving reactions between Li-0 and electrolyte, as well as contributions from cathode, moisture, and native surface species on Li-0, with dynamic changes during cycling.
NATURE NANOTECHNOLOGY
(2023)
Article
Chemistry, Physical
Solomon T. Oyakhire et al.
Summary: This study investigates the effects of constant current and constant voltage SEI formation protocols on the performance of lithium metal batteries. The results show that constant current SEIs provide better protection for lithium metal compared to constant voltage SEIs.
ACS ENERGY LETTERS
(2023)
Article
Chemistry, Multidisciplinary
Philaphon Sayavong et al.
Summary: This study quantitatively and comparatively investigates the solubility of solid electrolyte interfaces (SEIs) derived from ether-based electrolytes optimized for Limetal anodes (LMAs) using in-operando electrochemical quartz crystal microbalance (EQCM). The results suggest that solubility of SEIs directly affects their formation and growth, and is closely related to the properties of the electrolyte. This provides crucial information to minimize capacity loss caused by SEI formation and growth during battery cycling and aging.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2023)
Article
Multidisciplinary Sciences
Yu Gu et al.
Summary: In this study, a depth-sensitive plasmon-enhanced Raman spectroscopy (DS-PERS) method is developed for in situ and nondestructive characterization of the nanostructure and chemistry of the solid-electrolyte interphase (SEI) in lithium metal batteries. Insights from the DS-PERS study reveal the profound influences of lithium in modifying SEI formation and regulating Li-ion desolvation and subsequent Li deposition. Furthermore, a cycling protocol that promotes direct SEI formation is developed, significantly enhancing the performance of anode-free Li metal batteries.
NATURE COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Jun-Fan Ding et al.
Summary: This contribution describes a dynamic galvanic corrosion mechanism that leads to the generation of an extended solid electrolyte interphase (SEI) on the copper substrate during the Li removal process. The extent of dynamic galvanic corrosion is influenced by three critical factors: the total step length of Li stripping, the degradation speed of dynamic corrosion current (i(corrosion)), and the SEI chemistry.
ADVANCED ENERGY MATERIALS
(2023)
Article
Energy & Fuels
Qian-Kui Zhang et al.
Summary: The solid-electrolyte interphase (SEI) in lithium (Li) metal batteries is often heterogeneous and mechanically unstable. In this study, a bilayer SEI with improved homogeneity and mechanical stability is designed using trioxane-modulated electrolytes. The coin cell with the tailored bilayer SEI achieves 430 cycles, while the cell with an anion-derived SEI undergoes only 200 cycles. The development of a homogeneous and mechanically stable SEI expands the cyclability of high-energy-density lithium metal batteries.
Article
Multidisciplinary Sciences
Shobhan Dhir et al.
Summary: Non-aqueous potassium-ion batteries (KIBs) are a promising alternative to lithium-ion batteries due to the low cost and availability of potassium. This study characterizes the ionic transport and thermodynamic properties of a non-aqueous K-ion electrolyte solution and compares it to the Li-ion counterpart. The results show that KIBs have higher salt diffusion coefficients and cation transference numbers, indicating potential advantages in rate capability.
NATURE COMMUNICATIONS
(2023)
Article
Chemistry, Multidisciplinary
Gustavo M. Hobold et al.
Summary: Despite its potential as a candidate for meeting energy targets of Li-ion batteries, the lithium metal anode has not achieved the necessary Coulombic efficiency for long cycle life. The limitations are due to the solid electrolyte interphase (SEI), which stabilizes and protects the deposited lithium. The study quantifies the effect of Li+ exchange with the SEI on Coulombic efficiency and reveals a chemistry-dependent picture of SEI evolution. These findings have implications for high-CE electrolyte design targeting high rates.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Chemistry, Multidisciplinary
Woochul Shin et al.
Summary: Anode-free lithium batteries are considered the ultimate form of high-energy-density lithium-ion batteries. However, irreversible lithium loss during cycling degrades the overall cell performance. To mitigate this, a robust solid-electrolyte interface on the anode current collector is necessary. This study demonstrates that applying a potential hold during the first charge can guide more salt-derived decomposition on the anode interface, resulting in improved lithium Coulombic efficiency and reduced capacity fade.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Physical
Wei-Wei Wang et al.
Summary: This study investigates the impact of solid electrolyte interphases (SEIs) formed on copper surfaces and growing lithium nuclei on the deposition and dissolution processes. The formation of SEIs on bare Cu and on surfaces of growing Li nuclei were found to have different effects on subsequent processes. Models of integrated-SEI shells and segmented-SEI shells were proposed to describe the formation of SEI shells and their impact on deposition and dissolution processes.
FARADAY DISCUSSIONS
(2022)
Review
Materials Science, Coatings & Films
Sungun Wi et al.
Summary: An in-depth understanding of charge transfer processes at electrochemical interfaces is crucial for the design of energy storage materials. X-ray photoelectron spectroscopy plays a vital role in analyzing electronic structures of heterogeneous interfaces. Ex situ studies fail to capture intermediate and transient species, impeding a predictive understanding of the charge transfer process. Overcoming technical limitations, considerable progress has been made in in situ/operando x-ray analysis of buried interfaces. This review summarizes recent advances in the application of in situ and operando x-ray photoelectron spectroscopy for characterizing interfacial processes and discusses remaining challenges and future research directions.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A
(2022)
Article
Multidisciplinary Sciences
Zewen Zhang et al.
Summary: Characterizing liquid-solid interfaces remains challenging due to the limitations of existing tools. This study adopts a thin film vitrification method to preserve and study the structure and chemistry of key interfaces in batteries. The research reveals substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anodes in different electrolytes, with the swelling behavior correlated to battery performance.
Article
Chemistry, Physical
Zhou Yu et al.
Summary: Electrolytes are crucial for electrochemical storage and conversion devices, yet their complex nature has been a bottleneck in battery development. Recent studies have revealed nanometric aggregates in various electrolytes, impacting ion distribution and transport within bulk electrolytes and at electrode/electrolyte interfaces. Additional research and tools are needed to further understanding of these aggregates and their effects on electrolyte properties.
ACS ENERGY LETTERS
(2022)
Review
Chemistry, Physical
Hansen Wang et al.
Summary: The specific energy of commercial lithium-ion batteries is approaching the theoretical limit. The development of high energy density Li metal batteries is needed for future consumer electronics and electric vehicle markets. Electrolyte engineering can address the issues associated with Li metal batteries, but there are still gaps between the performance of current Li metal batteries and commercial requirements. Further improvements require systematic analysis of existing electrolyte design methodologies.
Article
Nanoscience & Nanotechnology
Chengwei Ma et al.
Summary: The solid electrolyte interface (SEI) layer of lithium metal batteries plays a crucial role in their stability. In this study, TOF-SIMS technology was used to investigate the structure and composition of SEI on the surface of a lithium metal anode. It was found that SEI is not a completely dense layer and can accommodate part of the electrolyte. This research provides important guidance for accurately characterizing the SEI layer and constructing a more realistic interface layer model.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Review
Materials Science, Multidisciplinary
Sudarshan Narayanan et al.
Summary: This article discusses the prospects and challenges of using lithium metal as the negative electrode in solid-state batteries, emphasizing the importance of in situ and operando characterization methods and highlighting the limitations and opportunities for future research.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
(2022)
Article
Electrochemistry
Bikila Nagasa Olana et al.
Summary: DRIFTS technique was used to investigate the surface reactions over Li and Cu anodes when using LiTFSI salt in DME and DOL solvents. The results showed that DME and DOL were stable, while LiTFSI decomposed into LiSO2CF3 and Li2NSO2CF3 species over Li anode. Additionally, LN was chemically decomposed over both Li and Cu anodes.
ELECTROCHIMICA ACTA
(2022)
Review
Chemistry, Multidisciplinary
Vincent Vivier et al.
Summary: This article presents a method for interpreting impedance spectroscopy data, which includes the use of graphical methods to guide model development, the use of a measurement model analysis to assess error structure, and the systematic development of interpretation models based on proposed reaction mechanisms and physical descriptions. The application of impedance spectroscopy in corrosion, batteries, and biological systems is discussed, and emerging trends in its interpretation and implementation are presented.
Article
Chemistry, Multidisciplinary
Mingming Tao et al.
Summary: By using mass spectrometry titration and solid state nuclear magnetic resonance techniques, the effects of several fluorinated electrolytes on lithium metal batteries during cycling were quantified. The results show that lithium difluoro(oxalato)borate inhibits the formation of solid electrolyte interphases and lithium hydride, while fluoroethylene carbonate mainly inhibits the formation of dead lithium metal. Additionally, a linear correlation was observed between lithium hydride and solid electrolyte interphase formation.
Article
Chemistry, Multidisciplinary
Jiaxiang Liu et al.
Summary: The formation mechanism of the solid electrolyte interphase (SEI) film has been investigated. It is found that chemical and electrochemical degradation are the main routes, leading to the formation of common inorganic matters and organic species. Based on this understanding, the SEI film can be accurately regulated and a heterojunction-type SEI film can be constructed.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Chemistry, Physical
Solomon T. Oyakhire et al.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Physical
Robert M. Kasse et al.
Summary: This study investigates the individual and combined effects of applied pressure and a LiAsF6 electrolyte additive on the performance of anode-free lithium-metal batteries. The results show that both pressure and additive improve the cycling performance individually, and their combination produces even higher performance. The mechanisms underlying pressure and additive are complementary, rather than competitive.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jayse Langdon et al.
Summary: This study investigates the effects of crossed-over chemical species in cells with oxide cathodes and lithium-metal anodes. It finds that crossover significantly affects the performance of batteries, such as reducing solid-electrolyte interphase growth when pairing a high-nickel cathode with a lithium-metal anode, and increasing capacity fade when pairing a cathode with lithium metal. The decomposition and crossover of FSI salt are identified as the main sources of these changes.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Sebastian P. Kuehn et al.
Summary: The study focuses on exploring an uncontaminated SEI, generating a preformed well-defined SEI through an advanced pretreatment method to exclude the influence of NPL. The introduction of a well-defined SEI allows for clear differentiation of the effects of FEC and VC on SEI characteristics and overall battery performance.
JOURNAL OF POWER SOURCES
(2022)
Article
Chemistry, Multidisciplinary
David T. Boyle et al.
Summary: The rechargeability of lithium metal batteries depends on the electrolyte, and the uniformity of the Li anode morphology is crucial for their performance. In this study, the authors investigate the correlation between electroplating kinetics and cyclability using various electrolytes, revealing the influence of electrolytes on morphology. They find that fast charge-transfer kinetics at the Li-electrolyte interfaces are associated with uniform morphology and good cyclability, while Li+ transport through the solid electrolyte interphase (SEI) weakly correlates with cyclability. The results suggest that the Li/Li+ equilibrium potential and the surface energy, modulated by Li+ solvation, underlie the electrolyte-dependent trends of Li morphology. This work provides insights for electrolyte discovery, kinetics tuning, and understanding the advantages of weakly solvating fluorinated electrolytes for uniform Li plating.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Electrochemistry
Ronja Haas et al.
Summary: Due to the need for high energy density storage, Li-O-2 batteries and Li metal anodes (LMA) have become the focus of research. Dissolving O-2 in the electrolyte can increase the Coulomb efficiency and improve the stability of the solid electrolyte interphase (SEI).
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2022)
Article
Chemistry, Multidisciplinary
David T. Boyle et al.
Summary: This study reveals the plating mechanisms and morphologies under low and high currents by measuring the transport of lithium ions at the solid electrolyte interface. Under fast-charging rates, the breakdown of the solid electrolyte interface can lead to detrimental morphologies and poor cyclability in lithium metal batteries.
Article
Chemistry, Physical
Seung-Yong Lee et al.
Summary: Understanding lithium stripping is crucial for using lithium metal anodes in high-energy rechargeable batteries. Through in-situ electrochemical liquid cell transmission electron microscopy, the mechanisms of lithium stripping were revealed, and different modes of stripping behavior were observed. The study also highlighted the importance of solid-electrolyte interphase (SEI) protection in subsequent cycles.
Article
Chemistry, Physical
Weilai Yu et al.
Summary: X-ray photoelectron spectroscopy (XPS) is commonly used to analyze the solid-electrolyte interphase (SEI) in batteries, but residual salt or solvent can complicate the interpretation of the results. This study systematically investigates the XPS characteristics of three different lithium salts and reveals the importance of completely removing the salt before analysis. The presence of organic solvent residues and impurities on the sample surface should be distinguished from the actual organic SEI.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Physical
Gustavo M. Hobold et al.
Summary: The capacity losses in Li anodes are mainly caused by the formation of electronically isolated Li-0 and parasitic reactions that form the solid electrolyte interphase (SEI). The quantification of losses has primarily focused on Li-0, but at high Coulombic efficiency (CE), SEI losses become dominant and need to be minimized. By using quantitative titration, a variety of key SEI phases were tracked, revealing that a minor phase, Li2C2, exhibited a clear inverse correlation with CE, suggesting its significant role in SEI function.
ACS ENERGY LETTERS
(2022)
Article
Energy & Fuels
Seongjae Ko et al.
Summary: In this study, the authors investigate the factors affecting the reversibility of lithium-metal anodes and propose an electrolyte design to improve the cycling performance. They find that the lithium electrode potential and its association with the Li+ coordination structure play a crucial role in Coulombic efficiency and electrolyte decomposition. By enhancing ion-pairing solution structure, the authors achieve a significantly improved cycling performance.
Article
Chemistry, Physical
Hyun-seung Kim et al.
Summary: Investigation on lithium metal batteries using DME-based electrolytes reveals anomalous crosstalk behavior, where oxidative decomposition of the electrolyte forms a film and soluble products on the positive electrode, leading to severe degradation and increased product yield. The soluble products readily diffuse to the lithium metal and form a resistive film, altering the lithium cycling kinetics and resulting in porous and dendritic deposits.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Physical
Xuanjie Feng et al.
Summary: This study explores the use of tributyl phosphate (TBP) as the main solvent to construct a fire-retardant localized high concentration electrolyte (LHCE). By adjusting the lithium salt concentration and introducing tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE), a LiF-rich solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI) were formed, effectively reducing the electrolyte decomposition. The designed electrolyte exhibits appropriate viscosity and conductivity.
SUSTAINABLE ENERGY & FUELS
(2022)
Article
Chemistry, Multidisciplinary
David T. Boyle et al.
Summary: The poor fast-charge capabilities of rechargeable Li metal anodes are limited by the current-dependent regimes of Li plating mechanisms and morphology. Understanding how high currents lead to detrimental morphology and poor cyclability can help prevent SEI-breakdown and slow ion transport, informing further electrolyte engineering and customization of fast-charging protocols for Li metal batteries.
Article
Nanoscience & Nanotechnology
Kyungmi Lim et al.
Summary: In this study, the growth mechanism and ionic transport properties of SEIs on Li/Na electrodes were systematically investigated, revealing the liquid/solid composite nature and porosity of SEIs, with SEIs on Na electrodes shown to be more porous than those on Li electrodes. Time-dependent activation energy of SEIs was evaluated using EIS, emphasizing the nonpassivating nature of SEIs on alkali metal batteries.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Svenja-K Otto et al.
Summary: Research indicates that a nanometer-thick passivation layer on the surface of lithium metal consists of an outer lithium hydroxide and carbonate layer, and an inner region rich in lithium oxide. The thickness and composition of the passivation layer depend on treatment and storage conditions. Guidelines for experimental design and data interpretation are provided to ensure reliable and comparable experimental results.
CHEMISTRY OF MATERIALS
(2021)
Article
Materials Science, Coatings & Films
Christopher Richard Brundle et al.
Summary: This article discusses the challenges of determining the elemental composition of solid materials using XPS analysis, with a detailed analysis conducted on LiF. The results demonstrate that various factors complicate highly accurate XPS quantification, emphasizing the need for careful consideration of different parameters for precise analysis.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A
(2021)
Article
Chemistry, Physical
Chen Gong et al.
Summary: The study investigates the nanoscale structural evolution of lithium electrodeposition and dissolution at the electrode surface across fluoride-poor and fluoride-rich interphases, showing that a fluoride-rich SEI can suppress lithium detachment and isolation, reduce dead Li formation, and prevent electrolyte decomposition, ultimately improving lithium cycling efficiency.
ADVANCED ENERGY MATERIALS
(2021)
Article
Nanoscience & Nanotechnology
Zulipiya Shadike et al.
Summary: A comprehensive understanding of the solid-electrolyte interphase (SEI) composition is crucial for developing high-energy batteries based on lithium metal anodes. This study used synchrotron-based X-ray diffraction and pair distribution function analysis to identify and differentiate two elusive components, LiH and LiF, in the SEI of lithium metal anodes. The presence of LiH in the SEI was confirmed, with discussion on the possibility of its misidentification as LiF in the literature. The study also found that LiF in the SEI has different structural features from LiF in the bulk phase, which favor Li+ transport and make it a favored component for the SEI.
NATURE NANOTECHNOLOGY
(2021)
Review
Chemistry, Physical
Jian Tan et al.
Summary: Rechargeable lithium batteries have transformed energy storage technology, but their further commercialization is hindered by short lifetime and safety issues, mainly due to the unstable solid-electrolyte interphase (SEI) and uncontrolled lithium dendrite growth. Research on SEI worldwide has focused on its debated structure and composition, particularly the role of the main component LiF. This review covers the development history of the SEI model, fundamental understanding of SEI, categorization of anode materials generating LiF in SEI, characterization techniques of SEI layers, transport mechanism of Li+ ions within SEI, physical properties of LiF, and analysis of LiF sources, offering insights for future research directions to promote large-scale applications of lithium metal batteries.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Rui Guo et al.
Summary: Research has shown that the SEI interfaces on Li anodes can undergo significant chemical evolution when exposed to different electrolytes, and the selection of electrolytes is crucial to improve transport in ionic-rich Li interfaces.
ACS ENERGY LETTERS
(2021)
Article
Chemistry, Multidisciplinary
Bing Han et al.
Summary: The stability of lithium-metal batteries is determined by the solid electrolyte interphase (SEI). Direct atomic imaging of the SEI using cryogenic transmission electron microscopy reveals that lithium carbonate is unstable in the SEI, leading to gas production when reacting with the electrolyte and a dynamically evolving SEI. Sulfur-containing additives preferentially generate Li2SO4 and other substances, limiting SEI thickening and enhancing battery life.
ADVANCED MATERIALS
(2021)
Article
Energy & Fuels
Chengcheng Fang et al.
Summary: This study presents a high-density Li deposition technique achieved by controlling uniaxial stack pressure to improve the performance of lithium metal batteries, along with proposing a Li morphology testing protocol to maintain the ideal Li deposition morphology. The critical role of stack pressure on Li nucleation, growth, and dissolution processes is elucidated, highlighting the importance of precise control of Li deposition and dissolution.
Review
Energy & Fuels
Gustavo M. Hobold et al.
Summary: This review examines the trends and key descriptors of Coulombic efficiency in Li-metal batteries over the past five decades, as well as strategies to improve CE. While advancements have been made in cost and energy density of Li-ion batteries, achieving high Coulombic efficiency consistently remains a challenge.
Article
Chemistry, Physical
Shouyi Yuan et al.
Summary: The research found that the organic composition in the SEI layer determines the Coulombic Efficiency of LMBs, and designing the SEI layer by adjusting the electrolyte composition may improve battery performance. An advanced multilayer SEI layer was designed in carbonate electrolyte, demonstrating potential for high energy density and long cycle life.
Article
Chemistry, Physical
Xueying Zheng et al.
Summary: The study formulated a nonflammable and highly fluorinated electrolyte recipe for a highly reversible Li metal anode, resulting in significant improvements in Li deposition morphology, Coulombic efficiency, and Li+ desolvation/transfer kinetics. Stable cyclability was achieved in full cells pairing with commercial cathodes under both room-temperature and subzero conditions, showcasing the universality of the design principle provided in the study.
ACS ENERGY LETTERS
(2021)
Review
Chemistry, Physical
Qing Zhao et al.
Summary: The solid electrolyte interphase (SEI) is a chemically distinct material phase formed by a combination of electrochemical reduction and chemical reactions at both the explicit and implicit interfaces in all electrochemical cells. Understanding the structure, chemistry, and thermodynamics of the materials that accumulate in such interfacial material phases plays a crucial role in achieving high levels of anode reversibility in secondary batteries. Strategies focusing on the rational design of the SEI at metal anodes, including taking advantage of redox chemistry of electrolyte components and creating artificial SEI outside the cell, are highlighted in the study.
Article
Nanoscience & Nanotechnology
Amirmasoud Lanjan et al.
Summary: The solid-electrolyte interface (SEI) layer plays a critical role in the lifespan of Li-ion batteries (LIBs), responsible for over 50% of capacity loss in commercial LIBs. Researchers have developed equations to evaluate the energy barrier against diffusion and diffusion coefficient in different crystal structures in the inner section of the SEI layer, aiming to improve the accuracy of LIBs mathematical models.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Physical
Chuntian Cao et al.
Summary: The research utilized a combination of experimental and theoretical approaches to investigate the reductive formation of LiF in LiPF6 electrolytes. Results indicated that LiF formation likely involves both direct anion reduction and electrocatalytic transformation of HF in these systems.
CHEMISTRY OF MATERIALS
(2021)
Article
Chemistry, Physical
Zeeshan Ahmad et al.
Summary: The properties of passivation layers at interfaces are crucial for the performance and safety of lithium-ion batteries, with the solid electrolyte interphase (SEI) being a critical factor. Understanding the interfacial properties of the multiphase SEI is essential for enabling fast ion transport and enhancing Li-ion diffusion in next-generation batteries.
JOURNAL OF PHYSICAL CHEMISTRY C
(2021)
Article
Chemistry, Multidisciplinary
Sang Cheol Kim et al.
Summary: In this study, a potentiometric technique was introduced to quantitatively characterize the impact of Li+ solvation energy in battery electrolytes on performance, revealing a correlation between cell potential and cycling stability. We found that solvents weakly binding to Li+ lead to improved cycling stability, as weaker solvation results in an anion-derived solid-electrolyte interphase that stabilizes cycling. This potentiometric measurement provides a guide for engineering effective electrolytes for lithium metal anodes.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2021)
Review
Nanoscience & Nanotechnology
Josefine D. McBrayer et al.
Summary: A stable solid electrolyte interphase (SEI) layer is crucial for high performance lithium ion and lithium metal batteries. Understanding the mechanical properties and behavior of the SEI is essential for rational design, but challenging due to its thin and air-sensitive nature. Various techniques have been used to study the mechanics of SEI, but there is a lack of concise review on the findings so far.
Article
Multidisciplinary Sciences
Jack Fawdon et al.
Summary: Understanding electrolyte transport and thermodynamic properties is crucial for the development and success of Li-ion and beyond Li-ion technologies. This study presents a method for fully characterising electrolyte systems, providing key parameters using operando Raman microspectroscopy for visualization and correlation with bulk intermolecular electrolyte structure. The full characterisation of lithium-ion electrolytes is essential for continued advancement and innovation in lithium ion and lithium metal batteries.
NATURE COMMUNICATIONS
(2021)
Article
Nanoscience & Nanotechnology
Mingqun Wang et al.
Summary: SIRM is a high-throughput super-resolution Raman imaging method with spatial resolution up to 80 nm and spectral resolution up to 50 cm(-1). This technique enables fast large-scale characterization of nanomaterials, with imaging time of specific Raman bands reduced to seconds.
Article
Chemistry, Physical
Yao Gao et al.
Summary: The capability of a solid electrolyte interphase (SEI) in accommodating deformation is critical to electrode integrity. A new indicator, maximum elastic deformation energy (U), is proposed to predict SEI stability and screen suitable electrolytes for different anodes. The study demonstrates a feasible atomic force microscopy-based nanoindentation test to accurately determine the mechanical parameters of SEI.
Article
Chemistry, Physical
Jihyun Jang et al.
Summary: In order to improve the energy density of lithium metal batteries, researchers have used a dual-solvent system with a fluorinated ether with high oxidative stability as a co-solvent to increase the electrolyte oxidation stability. By increasing the concentration of the salt coordinated by DME, the oxidation stability of the electrolyte is enhanced, resulting in improved stability and cycle performance of the batteries.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Electrochemistry
Sanaz Momeni Boroujeni et al.
Summary: This study investigated the behavior of lithium metal anode under different temperature, lithium salts, electrolyte concentrations, and cell currents, finding that cells at moderate temperature exhibit the highest efficiency, while high temperature results in the worst performance. Higher C-rates have a positive impact on the stability of lithium cells over cycling life.
Article
Chemistry, Physical
Adrian J. Sanchez et al.
Summary: This study explores the dynamic evolution of Li metal surface morphology during stripping, revealing strong anisotropy and faceting in surface pits that correlate with surface microstructure. The results provide greater insight into the fundamental nature of Li stripping reactions and raise new questions about the role of microstructure in reversible cycling of Li metal.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Physical
Jianhui Zheng et al.
Summary: By using cryogenic electron microscopy, four nanocrystalline inorganic components were identified in the SEI, with LiF surface showing the fastest diffusion rate for Li ions. This discovery contributes to understanding the Li ion diffusion mechanism and improving the ionic conductivity in SEI layers.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Review
Electrochemistry
Xia Cao et al.
Summary: Conventional LiPF6/carbonate-based electrolytes have been widely used in graphite-based lithium ion batteries for their stability, but are less stable in Li metal and silicon anodes. Localized high-concentration electrolytes have unique advantages, forming stable SEI layers to improve stability.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2021)
Article
Nanoscience & Nanotechnology
Yufan Zhou et al.
NATURE NANOTECHNOLOGY
(2020)
Article
Multidisciplinary Sciences
Mingfu He et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2020)
Article
Chemistry, Physical
David T. Boyle et al.
ACS ENERGY LETTERS
(2020)
Article
Chemistry, Physical
Rui Guo et al.
CHEMISTRY OF MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Maryam Nojabaee et al.
Article
Chemistry, Physical
William Huang et al.
ACS ENERGY LETTERS
(2020)
Article
Energy & Fuels
Jie Xiao et al.
Article
Energy & Fuels
Zhiao Yu et al.
Article
Chemistry, Multidisciplinary
Wei-Wei Wang et al.
Article
Chemistry, Physical
Yaobin Xu et al.
Article
Electrochemistry
Kazuki Yoshii et al.
Review
Chemistry, Multidisciplinary
Jingxu Zheng et al.
CHEMICAL SOCIETY REVIEWS
(2020)
Article
Electrochemistry
Adam Maraschky et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2020)
Article
Chemistry, Physical
Xue-Qiang Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2020)
Article
Chemistry, Physical
Insun Yoon et al.
ENERGY STORAGE MATERIALS
(2020)
Article
Chemistry, Physical
Ajaykrishna Ramasubramanian et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2019)
Article
Chemistry, Physical
Weidong Zhang et al.
ACS ENERGY LETTERS
(2019)
Review
Energy & Fuels
Jun Liu et al.
Article
Energy & Fuels
Jiangyan Wang et al.
Article
Multidisciplinary Sciences
Chengcheng Fang et al.
Article
Energy & Fuels
Xia Cao et al.
Review
Chemistry, Multidisciplinary
Xinyue Zhang et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2019)
Article
Electrochemistry
Yu Gu et al.
Article
Chemistry, Physical
Fabian Single et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2019)
Article
Chemistry, Multidisciplinary
Akila C. Thenuwara et al.
Article
Chemistry, Multidisciplinary
Judith Alvarado et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2019)
Article
Engineering, Electrical & Electronic
Mirko Holler et al.
NATURE ELECTRONICS
(2019)
Review
Materials Science, Multidisciplinary
Rui Xu et al.
Review
Energy & Fuels
Paul Albertus et al.
Article
Chemistry, Multidisciplinary
Sunhyung Jurng et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2018)
Article
Multidisciplinary Sciences
Yu Gu et al.
NATURE COMMUNICATIONS
(2018)
Article
Chemistry, Multidisciplinary
Pekka Peljo et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2018)
Article
Chemistry, Multidisciplinary
Insun Yoon et al.
Article
Multidisciplinary Sciences
Michael J. Zachman et al.
Article
Multidisciplinary Sciences
Feifei Shi et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2018)
Article
Chemistry, Physical
Zachary L. Brown et al.
ACS APPLIED ENERGY MATERIALS
(2018)
Article
Chemistry, Physical
Yuzhang Li et al.
Article
Electrochemistry
Adam Maraschky et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2018)
Article
Multidisciplinary Sciences
Chen Xu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
(2017)
Article
Electrochemistry
Laura Benitez et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2017)
Article
Chemistry, Multidisciplinary
Mitsunori Kitta et al.
Article
Multidisciplinary Sciences
Yuzhang Li et al.
Article
Electrochemistry
Dominique Koster et al.
ELECTROCHIMICA ACTA
(2017)
Review
Chemistry, Multidisciplinary
Xin-Bing Cheng et al.
Article
Chemistry, Multidisciplinary
Peng Bai et al.
ENERGY & ENVIRONMENTAL SCIENCE
(2016)
Article
Chemistry, Multidisciplinary
Siqi Shi et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2012)
Review
Chemistry, Physical
John B. Goodenough et al.
CHEMISTRY OF MATERIALS
(2010)
Article
Electrochemistry
Ken Tasaki et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
(2009)
Article
Chemistry, Physical
D Aurbach et al.
SOLID STATE IONICS
(2002)
Article
Materials Science, Multidisciplinary
R Saha et al.