☆ 4.6 Article

Uncertainty propagation in discrete element models using PDEM

STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Multi-objective optimization of double-walled steel cofferdams based on response surface methodology and particle swarm optimization algorithm

Junhu Shao et al.

Summary: In order to improve the safety and reduce the cost of steel cofferdams in deep-water bridge foundation construction, a multi-objective optimization method based on response surface methodology (RSM) and particle swarm optimization (PSO) algorithm was proposed. The design variables were selected as the thickness of the inner and outer wall plate, the height and thickness of the inner-wall brace, and the vertical spacing between annular plates. By using RSM and PSO, the optimal design parameters of the cofferdam were obtained, with a stress optimization rate of 49.8% for the inner-wall brace while keeping the original cost constant. The section size of the inner-wall brace was identified as the key design parameter for the cofferdam, providing a design idea for optimizing deep-water cofferdam structures.

STRUCTURES (2023)

Add to Collection

Article Engineering, Multidisciplinary

A level set driven concurrent reliability-based topology optimization (LS-CRBTO) strategy considering hybrid uncertainty inputs and damage defects updating

Zeshang Li et al.

Summary: This paper focuses on the higher requirements for lightweight design of structures and the development of advanced design technology. It proposes a concurrent reliability-based topology optimization design method considering multi-source hybrid uncertainties and defect damage.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Automatic recognition of slide mass and inversion analysis of landslide based on discrete element method

Yi Tang et al.

Summary: The slip surface is a crucial structure in analyzing landslide mechanisms, and it can be deformed by the traction and shear of the slide mass. In cases where landslides occur without artificial monitoring, the restoration of the slip surface based on pre- and post-landslide slope morphology can provide valuable information such as the safety factor and slide mass volume, helping engineers analyze the cause of the landslide. This paper proposes an automatic method for slide mass identification and landslide inversion analysis using discrete element simulation. The method utilizes Gaussian Mixture Model, alpha shape algorithm, discrete element simulation, and pre- and post-landslide slope morphology to invert the slip surface. The method is applicable to both two and three-dimensional slope models, and the effect of slope angle on slip surface deformation is analyzed.

COMPUTERS & GEOSCIENCES (2023)

Add to Collection

Article Engineering, Civil

Comparison of several model updating methods based on full-scale model test of track beam

Jiwei Zhong et al.

Summary: The response surface model updating method proposed in this paper utilizes dynamic weights and optimization techniques to enhance the accuracy and efficiency of the model. Through static and dynamic tests, the dynamic weight method shows significant advantages in model updating, effectively improving the model accuracy.

STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

A feature-driven robust topology optimization strategy considering movable non-design domain and complex uncertainty

Zeshang Li et al.

Summary: With the increasing diversification of engineering structure performance requirements and the continuous refinement of processing and manufacturing, structural design faces more factors to be considered. This study proposes a feature-driven robust topology optimization strategy considering movable non-design domain and complex uncertainty. It quantifies the influence of non-design domain and uncertainty on structural topology, analyzes the mathematical properties of structural response, and derives the sensitivity of the optimization model, providing a basis for gradient-based optimization algorithms.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Role of Material Fabric in Flexural Failure in Concrete

Subha Ghosh et al.

Summary: The study found that fabric anisotropy in angular specimens retards flexural crack growth, resulting in more tortuous cracks. Specimens with angular particles exhibit more crack branching and tortuosity, and therefore, higher macrofracture energy.

JOURNAL OF ENGINEERING MECHANICS (2021)

Add to Collection

Article Engineering, Civil

Response surface-based structural damage identification using dynamic responses

Kumar Anjneya et al.

Summary: Response surface methodology (RSM) is more efficient than finite element model (FEM) based updating techniques in updating a model. RSM can replace the time-consuming FEM-based updating step with a response surface-based surrogate model, while also solving the slow convergence and time consumption issues. The study showed that RSM is applicable for damage identification, with the RS equations generated from modal parameters being equally efficient in detecting and localizing damage in shear buildings.

STRUCTURES (2021)

Add to Collection

Article Engineering, Chemical

Deformation of 3D printed agglomerates: Multiscale experimental tests and DEM simulation

Ruihuan Ge et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A discrete element implementation for concrete: particle generation, contact calculations, packing under gravity and modeling material response

Ramkrishna Dandapat et al.

GRANULAR MATTER (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A discrete element implementation for concrete: particle generation, contact calculations, packing under gravity and modeling material response

Ramkrishna Dandapat et al.

GRANULAR MATTER (2018)

Add to Collection

Article Physics, Multidisciplinary

Discrete element modelling of concrete structures under hard impact by ogive-nose steel projectiles

Andria Antoniou et al.

EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS (2018)

Add to Collection

Article Engineering, Mechanical

Probability density evolution method: Background, significance and recent developments

Jie Li

PROBABILISTIC ENGINEERING MECHANICS (2016)

Add to Collection

Article Construction & Building Technology

Simulating the behaviour of fresh concrete with the Distinct Element Method - Deriving model parameters related to the yield stress

Viktor Mechtcherine et al.

CEMENT & CONCRETE COMPOSITES (2015)

Add to Collection

Article Construction & Building Technology

Simulating macroscopic behavior of self-compacting mixtures with DEM

H. Hoornahad et al.

CEMENT & CONCRETE COMPOSITES (2014)

Add to Collection

Article Construction & Building Technology

Developing a Discrete Element Model for simulating fresh concrete: Experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them

Sergiy Shyshko et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Acoustics

Stochastic damage detection method for building structures with parametric uncertainties

Y. L. Xu et al.

JOURNAL OF SOUND AND VIBRATION (2011)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Solution of generalized density evolution equation via a family of δ sequences

Wenliang Fan et al.

COMPUTATIONAL MECHANICS (2009)

Add to Collection

Article Engineering, Multidisciplinary

Strategy for selecting representative points via tangent spheres in the probability density evolution method

Jian-Bing Chen et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2008)

Add to Collection

Article Mathematics, Interdisciplinary Applications

The number theoretical method in response analysis of nonlinear stochastic structures

Jie Li et al.

COMPUTATIONAL MECHANICS (2007)

Add to Collection

Article Engineering, Mechanical

The dimension-reduction strategy via mapping for probability density evolution analysis of nonlinear stochastic systems

Jie Li et al.

PROBABILISTIC ENGINEERING MECHANICS (2006)

Add to Collection

Article Mechanics

Fifty-cent rheometer for yield stress measurements: From slump to spreading flow

N Roussel et al.

JOURNAL OF RHEOLOGY (2005)

Add to Collection

Article Engineering, Mechanical

Dynamic response and reliability analysis of non-linear stochastic structures

JB Chen et al.

PROBABILISTIC ENGINEERING MECHANICS (2005)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Probability density evolution method for dynamic response analysis of structures with uncertain parameters

J Li et al.

COMPUTATIONAL MECHANICS (2004)

Add to Collection

Article Acoustics

Statistical damage identification of structures with frequency changes

Y Xia et al.

JOURNAL OF SOUND AND VIBRATION (2003)

Add to Collection

Article Engineering, Civil

Damage identification of structures with uncertain frequency and mode shape data

Y Xia et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2002)

Add to Collection

Article Engineering, Mechanical

Bayesian updating of structural models and reliability using Markov chain Monte Carlo simulation

JL Beck et al.

JOURNAL OF ENGINEERING MECHANICS (2002)

Add to Collection

Article Construction & Building Technology

Compressive behavior of concrete confined by carbon fiber composite jackets

Y Xiao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2000)

Add to Collection

Article Engineering, Mechanical

Statistical damage assessment of framed structures from static responses

I Yeo et al.

JOURNAL OF ENGINEERING MECHANICS-ASCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.