Related references
Note: Only part of the references are listed.Artificial Intelligence, Machine Learning, and Deep Learning in Structural Engineering: A Scientometrics Review of Trends and Best Practices
Arash Teymori Gharah Tapeh et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2023)
Synergistic effects of the use of metakaolin, sand and water on the properties of cementitious composites for 3D printing
Hugo Alessandro Almeida Diniz et al.
CONSTRUCTION AND BUILDING MATERIALS (2023)
Mechanical and microstructural properties of 3D printable concrete in the context of the twin-pipe pumping strategy
Yaxin Tao et al.
CEMENT & CONCRETE COMPOSITES (2022)
Bending behaviour of steel cable reinforced 3D printed concrete in the direction perpendicular to the interfaces
Jianzhuang Xiao et al.
CEMENT & CONCRETE COMPOSITES (2022)
3D printable concrete with natural and recycled coarse aggregates: Rheological, mechanical and shrinkage behaviour
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2022)
Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete
Lei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure
Chao Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Influences of Printing Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
Luong Pham et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2022)
Design and analyses of printable strain hardening cementitious composites with optimized particle size distribution
Anne Linde van Overmeir et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction
Amardeep Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase Change Materials
Hongzhi Cui et al.
ENERGIES (2022)
Experimental study on the bond behaviour between steel bars and 3D printed concrete
Tao Ding et al.
JOURNAL OF BUILDING ENGINEERING (2022)
A review of 3D printed concrete: Performance requirements, testing measurements and mix design
Shaodan Hou et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Estimating compressive strength of modern concrete mixtures using computational intelligence: A systematic review
Itzel Nunez et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Mechanical Properties of Hardened 3D Printed Concretes and Mortars-Development of a Consistent Experimental Characterization Strategy
Maximilian Meurer et al.
MATERIALS (2021)
Optimum Mix Design for 3D Concrete Printing Using Mining Tailings: A Case Study in Spain
Martina-Inmaculada Alvarez-Fernandez et al.
SUSTAINABILITY (2021)
3D concrete printing of permanent formwork for concrete column construction
Binrong Zhu et al.
CEMENT & CONCRETE COMPOSITES (2021)
3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties
Kequan Yu et al.
CEMENT AND CONCRETE RESEARCH (2021)
High correlated variables creator machine: Prediction of the compressive strength of concrete
Aydin Shishegaran et al.
COMPUTERS & STRUCTURES (2021)
Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete
Junhong Ye et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Prediction Compressive Strength of Concrete Containing GGBFS using Random Forest Model
Hai-Van Thi Mai et al.
ADVANCES IN CIVIL ENGINEERING (2021)
Structural behaviour of 3D printed concrete beams with various reinforcement strategies
Lukas Gebhard et al.
ENGINEERING STRUCTURES (2021)
Evaluating the printability of concretes containing lightweight coarse aggregates
A. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2020)
Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer
Emadaldin Mohammadi Golafshani et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of the printing method and mortar's workability on pull-out strength of 3D printed elements
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing
Inka Dressler et al.
MATERIALS (2020)
Injection 3D Concrete Printing (I3DCP): Basic Principles and Case Studies
Norman Hack et al.
MATERIALS (2020)
Development of a 3D Printer for Concrete Structures: Laboratory Testing of Cementitious Materials
Jun Ho Jo et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2020)
Mechanical behavior of lightweight concrete structures subjected to 3D coupled static-dynamic loads
S. R. Wang et al.
ACTA MECHANICA (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP)
Harald Kloft et al.
CEMENT AND CONCRETE RESEARCH (2020)
Hardened properties of layered 3D printed concrete with recycled sand
Tao Ding et al.
CEMENT & CONCRETE COMPOSITES (2020)
Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete
Karol Federowicz et al.
MATERIALS (2020)
Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables
Zhijian Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D Concrete Printing for Sustainable Construction
Maria Kaszynska et al.
ENERGIES (2020)
Buildability and Mechanical Properties of 3D Printed Concrete
Changbin Joh et al.
MATERIALS (2020)
Can the compressive strength of concrete be estimated from knowledge of the mixture proportions?: New insights from statistical analysis and machine learning methods
Benjamin A. Young et al.
CEMENT AND CONCRETE RESEARCH (2019)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A Study into the Effect of Different Nozzles Shapes and Fibre-Reinforcement in 3D Printed Mortar
Pshtiwan Shakor et al.
MATERIALS (2019)
Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
Yu Chen et al.
APPLIED SCIENCES-BASEL (2019)
Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing
Viktor Mechtcherine et al.
AUTOMATION IN CONSTRUCTION (2019)
A review of the current progress and application of 3D printed concrete
Jingchuan Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Printability region for 3D concrete printing using slump and slump flow test
Yi Wei Daniel Tay et al.
COMPOSITES PART B-ENGINEERING (2019)
A comparison of machine learning methods for predicting the compressive strength of field-placed concrete
M. A. DeRousseau et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical characterization of 3D printable concrete
A. Rahul et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
Wu-Jian Long et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Predicting Motor Insurance Claims Using Telematics Data-XGBoost versus Logistic Regression
Jessica Pesantez-Narvaez et al.
RISKS (2019)
Ductility of 3D printed concrete reinforced with short straight steel fibers
F. P. Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Comparison of random forest, artificial neural networks and support vector machine for intelligent diagnosis of rotating machinery
Te Han et al.
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL (2018)
Random forest versus logistic regression: a large-scale benchmark experiment
Raphael Couronne et al.
BMC BIOINFORMATICS (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Sarah Al-Qutaifi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Prediction of compressive strength of self-compacting concrete by ANFIS models
Behnam Vakhshouri et al.
NEUROCOMPUTING (2018)
Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluation of workability parameters in 3D printing concrete
M. Papachristoforou et al.
1ST INTERNATIONAL CONFERENCE OF THE GREEK SOCIETY OF EXPERIMENTAL MECHANICS OF MATERIALS (GSEMM) (2018)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Investigation of concrete mixtures for additive construction
Todd S. Rushing et al.
RAPID PROTOTYPING JOURNAL (2017)
Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars
Noura Khalil et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Estimation of compressive strength of BFS and WTRP blended cement mortars with machine learning models
Giyasettin Ozcan et al.
COMPUTERS AND CONCRETE (2017)
Prediction of the compressive strength of normal and high-performance concretes using M5P model tree algorithm
Ali Behnood et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Machine learning in concrete strength simulations: Multi-nation data analytics
Jui-Sheng Chou et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
High-performance Concrete Compressive Strength Prediction using Time-Weighted Evolutionary Fuzzy Support Vector Machines Inference Model
Min-Yuan Cheng et al.
AUTOMATION IN CONSTRUCTION (2012)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
The effect of coarse aggregate gradation on the properties of self-compacting concrete
Hui Zhao et al.
MATERIALS & DESIGN (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Estimation of prediction error by using K-fold cross-validation
Tadayoshi Fushiki
STATISTICS AND COMPUTING (2011)
Effect of absorption of limestone aggregates on strength and slump loss of concrete
Abdulrahman M. Alhozaimy
CEMENT & CONCRETE COMPOSITES (2009)
Knowledge discovery of concrete material using Genetic Operation Trees
I-Cheng Yeh et al.
EXPERT SYSTEMS WITH APPLICATIONS (2009)
Empirical characterization of random forest variable importance measures
Kelfie J. Archer et al.
COMPUTATIONAL STATISTICS & DATA ANALYSIS (2008)
Predicting the compressive strength and slump of high strength concrete using neural network
Ahmet Oztas et al.
CONSTRUCTION AND BUILDING MATERIALS (2006)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
Prediction of concrete strength using artificial neural networks
SC Lee
ENGINEERING STRUCTURES (2003)
Share Paper
