☆ 4.6 Article

Flexural and shear behavior of ultra-high performance concrete segmental joints

STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Ultra-high performance recycled steel fiber reinforced concrete segments under the thrust force of TBM jacks and their environmental potentialities

Esmail Gholami et al.

Summary: Investigations have found that segmental tunnel linings are most affected during installation, especially when thrust force is applied. This research aims to evaluate the performance of ultra-high performance fiber reinforced concrete (UHPFRC) with recycled steel fibers (RSF) in tunnel lining segments. Experimental and numerical research, including small-scaled segments, was conducted. The results show that UHPFRC segments with RSF can effectively reduce crack formation caused by thrust forces and new hybrid reinforced designs outperform conventional reinforced segments.

STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Experimental and numerical investigation of flexural behavior of RC beams retrofitted with reinforced UHPFRC layer in tension surface

Sayed Ahmed et al.

Summary: This paper investigates the major parameters that control the effectiveness of retrofitting RC beams with an additional reinforced UHPFRC layer. The results showed that retrofitted beams exhibited significantly improved ultimate load, stiffness, and energy absorption ability compared to the control beam. The length and thickness of the UHPFRC layer were identified as the most significant parameters.

STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Flexural behavior of UHPC joints for precast UHPC deck slabs

Minghong Qiu et al.

Summary: This study experimentally investigated the flexural behavior of UHPC joint connections in precast UHPC deck slabs, analyzing the impact of joint shape, steel reinforcement diameter, precast UHPC slab restraining condition, and joint interface roughness on mechanical performance. The findings showed that different joint shapes and increased steel reinforcement diameter influenced the flexural capacity and cracking resistance of the UHPC joint connections. Additionally, improving the interface roughness at the precast UHPC slab enhanced cracking resistance without significant effect on other mechanical characteristics.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Improving the seismic capacity of steel-concrete composite frames with spiral-confined slabs

Marco Fasan et al.

Summary: This paper investigates a novel confinement solution for reinforced concrete (RC) slabs in steel-concrete composite frames. By using diagonal steel spirals, the overall compressive response of the RC slab is enhanced, resulting in increased resistance capacity and improved ductility of the slab, which in turn benefits the overall resisting mechanisms of the steel-concrete composite frames.

ADVANCES IN STRUCTURAL ENGINEERING (2022)

Add to Collection

Review Construction & Building Technology

A critical review on compressive behavior and empirical constitutive models of concrete

Xue Ouyang et al.

Summary: This paper reviews the compressive behavior and empirical constitutive models of concrete with strength in the range from 20 to 200 MPa. The characteristics of compressive stress-strain curves and their influential factors are discussed. A general equation for concrete with different strengths is proposed.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Experimental study and finite element analysis of seismic behaviour of novel precast prestressed concrete frames

Dong-bin Li et al.

Summary: A novel precast prestressed concrete frame structure was developed and tested for its seismic performance. The results showed that the structure exhibited satisfactory seismic resistance and met the design requirements. Nonlinear finite element models were established and validated through comparison with experimental results.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Experimental and numerical study on shear performance of externally prestressed precast UHPC segmental beams without stirrups br

Haibo Jiang et al.

Summary: This paper explores the shear behavior of externally prestressed precast ultra-high performance concrete segmental beams without stirrups and investigates the influence of experimental parameters through both physical testing and numerical analysis. The results show that increasing the content of steel fibers and using stirrups can effectively improve the shear strength and stiffness of the beams.

STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Flexural Behavior of Precast RC Deck Panels with Cast-in-Place UHPFRC Connection

Zhe Zhang et al.

Summary: The study demonstrates that ultra-high performance fiber reinforced concrete connections can effectively address the cracking and water infiltration issues in precast concrete bridge structures, while providing high flexural capacity and strong interfacial bonding.

COATINGS (2022)

Add to Collection

Review Construction & Building Technology

Influence of fibers on fresh and hardened properties of Ultra High Performance Concrete (UHPC)-A review

Darssni Ravichandran et al.

Summary: This article provides a detailed review and analysis of the effect of fibers on the fresh and hardened properties of Ultra High Performance Concrete (UHPC). The study examines the fiber-to-binder interaction mechanism, geometrical and strength properties of various types of fibers, as well as the impact of fiber dosage and geometry on workability, rheology, microstructure, compressive strength, tensile strength, and durability properties. The findings offer valuable insights for stakeholders in terms of potential applications, current challenges, and an overall summary of UHPC.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Experimental and numerical investigations on flexural performance of ultra-high-performance concrete (UHPC) beams with wet joints

Zheng Feng et al.

Summary: This study investigated the mechanical behavior of ultra-high-performance concrete wet joint beams through experimental and numerical simulations. It was found that the first visual crack and maximum crack width appeared at the wet joints, and an increased reinforcement ratio improved the flexural capacity of the wet joint beams. The shape of the joint significantly influenced the flexural performance of the wet joint beams, with the inverted trapezoidal keyed joint exhibiting the best performance.

STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Research progress on the dynamic compressive properties of ultra-high performance concrete under high strain rates

Qingliang Yu et al.

Summary: The paper presents a comprehensive analysis of various aspects of dynamic compressive properties of ultra-high performance concrete, including factors such as steel fibers, temperature, coarse aggregate, nanomaterials, size effect, and loading rate. Prediction models for dynamic strength and energy absorption are proposed, along with the exploration of a new failure mechanism.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Engineering, Civil

Failure Analysis of Dapped-End Cracking in Posttensioned Bridge Girder

Tidarut Jirawattanasomkul et al.

Summary: This paper aims to identify the possible causes of a re-entrant corner diagonal crack in a posttensioned concrete girder bridge, suggesting that the combined impacts of insufficient hanger reinforcement and prestress losses in the girder's end-section were the probable cause of the damage.

JOURNAL OF BRIDGE ENGINEERING (2021)

Add to Collection

Review Engineering, Civil

Steel fiber reinforced concrete: A review of its material properties and usage in tunnel lining

Xiuling Wang et al.

Summary: The complicated tunnelling conditions and variable engineering demands pose challenges for mesh-reinforced lining structures, while SFRC is considered a reliable alternative with good performance and advantages. The application of SFRC in tunnel linings can effectively control rock displacement, reduce lining pressure, and improve the stability of support structures.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Modeling of ultra-high performance fiber reinforced concrete columns under eccentric loading

Mohammed A. Sakr et al.

Summary: Two FE models were developed to investigate the behavior of UHPFRC columns, which showed that using UHPFRC improves post peak ductility and increases peak loads compared to NSC and HSC. The validated FE model demonstrated the effectiveness of UHPFRC on column behavior, and a proposed analytical model showed comparatively high accuracy for practical design.

STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

UHPFRC technology to enhance the performance of existing concrete bridges

Eugen Bruhwiler

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Joint Design Optimization for Accelerated Construction of Slab Beam Bridges

F. D. Chitty et al.

JOURNAL OF BRIDGE ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Interface Shear Strength at Various Joint Types in High-Strength Precast Concrete Structures

Young-Jin Kim et al.

MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Finite element analysis of tensile and puncture behaviours of geosynthetic cementitious composite mat (GCCM)

Tidarut Jirawattanasomkul et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Finite element modelling of flexural behaviour of geosynthetic cementitious composite mat (GCCM)

Tidarut Jirawattanasomkul et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Interface Shear Strength at Joints of Ultra-High Performance Concrete Structures

Young-Jin Kim et al.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Modeling the Shear Connection in Adjacent Box-Beam Bridges with Ultrahigh-Performance Concrete Joints. I: Model Calibration and Validation

Husam H. Hussein et al.

JOURNAL OF BRIDGE ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Interfacial Properties of Ultrahigh-Performance Concrete and High-Strength Concrete Bridge Connections

Husam H. Hussein et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

A study on the flexural behavior of lap-spliced cast-in-place joints under static loading in ultra-high performance concrete bridge deck slabs

Hoonhee Hwang et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading

K. Wille et al.

CEMENT & CONCRETE COMPOSITES (2014)

Add to Collection

Article Construction & Building Technology

Experimental assessment of connections for precast concrete frames using ultra high performance fibre reinforced concrete

L. F. Maya et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Experimental and numerical studies of size effects of Ultra High Performance Steel Fibre Reinforced Concrete (UHPFRC) beams

Goran H. Mahmud et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)

A. M. T. Hassan et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

Performance of transverse joint grout materials in full-depth precast concrete bridge deck systems

MA Issa et al.

PCI JOURNAL (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.