4.7 Article

The Effect of Salinity on the Strength Behavior of Hydrate-Bearing Sands

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Compression-induced dynamic change in effective permeability of hydrate-bearing sediments during hydrate dissociation by depressurization

Fanbao Cheng et al.

Summary: Methane hydrate, also known as flammable ice, is a clean energy source that has gained global attention as an alternative to traditional fossil fuels. The effective permeability, which is influenced by hydrate saturation and porosity changes, plays a crucial role in determining the gas production rate. This study conducted experiments to measure the effective permeability of hydrate-bearing sediments with varying hydrate saturation. The results showed that the effective permeability decreased with increasing hydrate saturation and effective stress. A formula was proposed to estimate the change in effective permeability during hydrate dissociation, and it was integrated into a thermal-hydraulic model to predict gas production under effective stress. The study provided valuable insights into compression-induced changes in effective permeability and gas/water production during hydrate dissociation.

ENERGY (2023)

Article Thermodynamics

Microstructure evolution and dynamic permeability anisotropy during hydrate dissociation in sediment under stress state

Peng Wu et al.

Summary: In this study, depressurizing dissociation was conducted on a hydrate-bearing sandy specimen using X-ray CT under triaxial stress. The results show that hydrate dissociation starts from the hydrate-gas interface and then results in the formation of cavities among patchy clusters. As the hydrate particle dissociates to a smaller size, the dissociated water gathers on the surface of the hydrate, preventing contact between the hydrate and gas phases. Subsidence is observed even at a low isotropic stress of 1 MPa after hydrate dissociation. Furthermore, the pore system characteristics vary with decreasing hydrate saturation, and the permeability of the hydrate-bearing sediment increases exponentially with decreasing hydrate saturation and is anisotropic due to the inhomogeneity of hydrate dissociation, which can be predicted via electrical conductivity.

ENERGY (2023)

Article Thermodynamics

Gas permeability variation during methane hydrate dissociation by depressurization in marine sediments

Haijun Wang et al.

Summary: This study investigated the influence of hydrate saturation and effective stress on permeability change. It found that hydrate saturation has a dominant effect on permeability dynamic change under low effective stress, while effective stress variation dominates at higher effective stresses. Additionally, compression was found to enhance heat transfer efficiency in high-saturation samples.

ENERGY (2023)

Article Thermodynamics

Gas recovery from marine hydrate reservoir: Experimental investigation on gas flow patterns considering pressure effect

Haijun Wang et al.

Summary: Accurate understanding of fluid flow patterns in hydrate-bearing sediments is crucial for economic exploitation. This study investigates the effects of hydrate saturation, effective stress, pore pressure, and osmotic pressure on gas flow patterns. The results show that as hydrate saturation increases, gas flow transitions from viscous flow to slip flow, with the slippage effect becoming more pronounced. Effective stress affects gas permeability's sensitivity to osmotic pressure changes, particularly at lower hydrate saturation. Pore pressure has a minimal impact on gas permeability and flow pattern, while reducing osmotic pressure weakens the slippage effect. Finally, a semi-empirical permeability model is developed based on experimental data.

ENERGY (2023)

Article Thermodynamics

Deformation characteristics of methane hydrate-bearing clayey and sandy sediments during depressurization dissociation

Yanghui Li et al.

Summary: Natural gas hydrate, as a promising new energy, has attracted wide attention in the past decades. Experimental efforts have been made to explore the mechanical characteristics of hydrate-bearing clayey sediment under stable conditions, but few studies focus on its creep characteristics during the dissociation process. This study presents triaxial creep test results of methane hydrate-bearing clayey sediment using the depressurization dissociation method, with methane hydrate-bearing sandy sediments added for comparison. The results show that depressurization has little effect on axial strain but increases volumetric strain and reduces equivalent Poisson's ratio.

ENERGY (2023)

Article Energy & Fuels

Mechanical properties of methane hydrate-bearing sandy sediments under various temperatures and pore pressures

Shi Shen et al.

Summary: This study conducted mechanical experiments to investigate the effects of temperature and pore pressure on methane hydrate-bearing sediments (MHBSs). The results showed that with decreasing temperature and increasing pore pressure, the strength of the samples increased, and the dilatant volumetric strain also increased. The study also established a numerical relation between strength, temperature, and pore pressure.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Article Thermodynamics

An In-Situ MRI Method for Quantifying Temperature Changes during Crystal Hydrate Growths in Porous Medium

Zhang Lunxiang et al.

Summary: In this study, real-time observation of the temperature changes during the formation of tetrahydrofuran hydrates was conducted using an MRI system. The results showed significant spatial and temporal differences in temperature, which could have important implications in optimizing the phase transition process of gas hydrates.

JOURNAL OF THERMAL SCIENCE (2022)

Article Engineering, Geological

Hydrate-bearing sediment of the South China Sea: Microstructure and mechanical characteristics

Peng Wu et al.

Summary: The mechanical characteristics of clayey-silty sediments in the South China Sea, which are reservoirs for offshore hydrate production, were comprehensively investigated in this study. Both micro and macro analyses were conducted, revealing the distribution and morphology of hydrates and obtaining important input parameters for the development of constitutive models and numerical simulations. The findings also indicated differences between the South China Sea sediments and the hydrate reservoir in the Krishna-Godavari Basin.

ENGINEERING GEOLOGY (2022)

Article Engineering, Geological

Undrained triaxial tests on water-saturated methane hydrate-bearing clayey-silty sediments of the South China Sea

Lei Wang et al.

Summary: Research has shown that in fine-grained sediments in the South China Sea, the failure strength of methane hydrate-bearing sediments increases with the increase in hydrate saturation and initial effective mean stress. Additionally, the excess pore-water pressure of methane hydrate-bearing sediments remains positive during shear. It is observed that as the hydrate saturation increases, cohesion in the Mohr-Coulomb model increases while the internal friction angle has little dependence on the hydrate saturation.

CANADIAN GEOTECHNICAL JOURNAL (2021)

Review Energy & Fuels

Mechanical Characteristics of Hydrate-Bearing Sediment: A Review

Peng Wu et al.

Summary: This review comprehensively summarizes recent mechanical studies on hydrate-bearing sediment (HBS), clarifies the influences of several important parameters on the mechanical behavior of HBS, discusses corresponding particle-level mechanisms, and investigates the influences of hydrate exploitation techniques on the strength and deformation behavior of HBS. The proposed relationships and mechanisms provide insightful guidance for understanding the mechanical behavior of HBS and developing models for predicting the structural evolution of HBS during NGH exploration and exploitation.

ENERGY & FUELS (2021)

Review Energy & Fuels

Comprehensive review of geomechanical constitutive models of gas hydrate-bearing sediments

Lei Wang et al.

Summary: This paper reviews the geomechanical constitutive models of gas hydrate-bearing sediments, discussing their characteristics, advantages, limitations, and providing suggestions for establishing new models. The paper may guide the establishment of new geomechanical constitutive models and numerical simulation of ground deformation during hydrate exploitation.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

Article Energy & Fuels

Effect of Temperature on the Mechanical Properties of Hydrate-Bearing Sand under Different Confining Pressures

Shi Shen et al.

Summary: Experimental data from mechanical experiments on HBSs at different temperatures and effective confining pressures revealed a significant correlation between the samples' mechanical properties and temperature and effective confining pressure. The strength of HBSs was found to be positively correlated with effective confining pressure and negatively correlated with temperature. Furthermore, the stress-strain behaviors of the samples shifted from hardening to softening with decreasing effective confining pressure and temperature.

ENERGY & FUELS (2021)

Article Energy & Fuels

Analysis of the mechanical properties of methane hydrate-bearing sands with various pore pressures and confining pressures

Shi Shen et al.

Summary: The study investigated the mechanical properties of methane hydrate-bearing sediments under different pore pressures and effective confining pressures through a series of tests, revealing that the strength of samples increased with increasing pressures. Additionally, factors influencing the failure stress points lines for the samples were identified, including the increase in cohesion with increasing pore pressure.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2021)

Article Computer Science, Interdisciplinary Applications

Salinity effects on the mechanical behaviour of methane hydrate bearing sediments: A DEM investigation

Mingjing Jiang et al.

Summary: The study investigates the effect of salinity on the stability and mechanical response of methane hydrate, using Distinct Element Method to analyze the results at a micro scale. Experimental data verification shows that as salinity increases, shear strength and stiffness of methane hydrate-bearing sediments decrease, while deformation and bond breakage ratio accelerate, providing valuable insights for the safe exploitation of methane hydrate resources in the future.

COMPUTERS AND GEOTECHNICS (2021)

Article Energy & Fuels

Observation of the Main Natural Parameters Influencing the Formation of Gas Hydrates

Alberto Maria Gambelli et al.

Summary: This study investigated the impact of seawater chemical composition in marine sediments on the phase behavior of natural gas hydrates, by analyzing the abundance of main elements such as sodium, calcium, potassium, magnesium, chloride, and sulfate. The results were used to determine the effect of water salinity on hydrate formation thermodynamics, and experimental testing revealed that the presence of different porous media affected the hydrate formation process.

ENERGIES (2021)

Article Geochemistry & Geophysics

Pore-Scale 3D Morphological Modeling and Physical Characterization of Hydrate-Bearing Sediment Based on Computed Tomography

Peng Wu et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2020)

Article Geosciences, Multidisciplinary

The second natural gas hydrate production test in the South China Sea

Jian-liang Ye et al.

CHINA GEOLOGY (2020)

Article Geosciences, Multidisciplinary

Strength Estimation for Hydrate-Bearing Sediments From Direct Shear Tests of Hydrate-Bearing Sand and Silt

Zhichao Liu et al.

GEOPHYSICAL RESEARCH LETTERS (2018)

Article Geosciences, Multidisciplinary

The first offshore natural gas hydrate production test in South China Sea

Jin-fa Li et al.

CHINA GEOLOGY (2018)

Article Engineering, Chemical

An Application of the Results from the Large-Scale Thermal Stimulation Method of Methane Hydrate Dissociation to the Field Tests

Swanand S. Tupsakhare et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Energy & Fuels

An easy and efficient way to evaluate mechanical properties of gas hydrate-bearing sediments: The direct shear test

Zhichao Liu et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2017)

Article Chemistry, Multidisciplinary

Time Resolved Coarsening of Clathrate Crystals: The Case of Gas Hydrates

Marwen Chaouachi et al.

CRYSTAL GROWTH & DESIGN (2017)

Review Energy & Fuels

Investigation into gas production from natural gas hydrate: A review

Xiao-Sen Li et al.

APPLIED ENERGY (2016)

Article Geochemistry & Geophysics

Synchrotron X-ray computed microtomography study on gas hydrate decomposition in a sedimentary matrix

Lei Yang et al.

GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2016)

Article Geochemistry & Geophysics

Microstructural evolution of gas hydrates in sedimentary matrices observed with synchrotron X-ray computed tomographic microscopy

Marwen Chaouachi et al.

GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2015)

Article Geosciences, Multidisciplinary

Hydro-bio-geomechanical properties of hydrate-bearing sediments from Nankai Trough

J. C. Santamarina et al.

MARINE AND PETROLEUM GEOLOGY (2015)

Article Geosciences, Multidisciplinary

PCATS Triaxial: A new geotechnical apparatus for characterizing pressure cores from the Nankai Trough, Japan

Jeffrey A. Priest et al.

MARINE AND PETROLEUM GEOLOGY (2015)

Review Green & Sustainable Science & Technology

The status of natural gas hydrate research in China: A review

Yongchen Song et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Instruments & Instrumentation

Triaxial testing system for pressure core analysis using image processing technique

J. Yoneda et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Article Engineering, Geological

Mechanical and dissociation properties of methane hydrate-bearing sand in deep seabed

Masayuki Hyodo et al.

SOILS AND FOUNDATIONS (2013)

Article Energy & Fuels

Commercial gas production from Messoyakha deposit in hydrate conditions

Y. F. Makogon et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2013)

Article Geochemistry & Geophysics

Mechanical behavior of gas-saturated methane hydrate-bearing sediments

Masayuki Hyodo et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2013)

Article Chemistry, Multidisciplinary

Mechanical properties of clathrate hydrates: status and perspectives

Fulong Ning et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Engineering, Geological

Effect of large void formation on strength of cemented glass beads

Sung-Sik Park

ENGINEERING GEOLOGY (2012)

Article Geochemistry & Geophysics

Hydrate adhesive and tensile strengths

J. W. Jung et al.

GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2011)

Article Geochemistry & Geophysics

CH4-CO2 replacement in hydrate-bearing sediments: A pore-scale study

J. W. Jung et al.

GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS (2010)

Review Geochemistry & Geophysics

PHYSICAL PROPERTIES OF HYDRATE-BEARING SEDIMENTS

W. F. Waite et al.

REVIEWS OF GEOPHYSICS (2009)

Editorial Material Multidisciplinary Sciences

Is Gas Hydrate Energy Within Reach?

Ray Boswell

SCIENCE (2009)

Article Geochemistry & Geophysics

Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate

T. S. Yun et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2007)

Article Geosciences, Multidisciplinary

Slide structure and role of gas hydrate at the northern boundary of the Storegga Slide, offshore Norway

Hillary E. Brown et al.

MARINE GEOLOGY (2006)

Review Geosciences, Multidisciplinary

Potential impact on climate of the exploitation of methane hydrate deposits offshore

GP Glasby

MARINE AND PETROLEUM GEOLOGY (2003)