☆ 4.6 Article

Influence of annealing on the structure and wear resistance of coatings produced by cold spraying of Al-SHS7574 powder mixture

MATERIALS TODAY COMMUNICATIONS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Towards a Better Understanding of the Interaction of Fe66Cr10Nb5B19 Metallic Glass with Aluminum: Growth of Intermetallics and Formation of Kirkendall Porosity during Sintering

Dina V. Dudina et al.

Summary: Metallic-glass-reinforced metal matrix composites are a new type of composite materials, in which amorphous alloys act as reinforcement. This study investigated the morphology of the reaction products formed when Fe66Cr10Nb5B19 metallic glass particles interacted with aluminum. The composites were processed using spark plasma sintering, hot pressing, or a combination of both. The reaction products observed included dense layers covering the alloy cores, needles protruding from the shells, and needles and platelets distributed in the aluminum matrix. The role of the liquid phase in the structure formation and the occurrence of pores due to the Kirkendall effect were discussed.

CHEMISTRY-SWITZERLAND (2023)

Add to Collection

Article Materials Science, Coatings & Films

Wear-Resistant Fe-Based Metallic Glass-Al2O3 Composite Coatings Produced by Detonation Spraying

Ivanna D. Kuchumova et al.

Summary: Al2O3 particle-modified Fe66Cr10Nb5B19 metallic glass matrix coatings were deposited on carbon steel substrates using detonation spraying. The microstructure, mechanical and tribological properties of the coatings were investigated. It was found that the friction coefficients of the coatings were similar and the specific wear rate was reduced compared to stainless steel.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanical Alloying Integrated with Cold Spray Coating for Fabrication Cu50(Ti50-xNix), x; 10, 20, 30, and 40 at.% Antibiofilm Metallic Glass Coated/SUS304 Sheets

Ahmad Aldhameer et al.

Summary: Antibacterial agents derived from conventional organic compounds have been used as biofilm protective coatings, but they often contain toxic components. The cold spray technique and metallic glass powders have shown superior performance in producing antibiofilm coatings. They can inhibit biofilm formation effectively.

NANOMATERIALS (2022)

Add to Collection

Review Chemistry, Physical

Metallic Glass-Reinforced Metal Matrix Composites: Design, Interfaces and Properties

Konstantinos Georgarakis et al.

Summary: This review article discusses the progress in the study of metal matrix composites (MMCs) reinforced with metallic glasses and amorphous alloys, including the composition, design methods and fabrication techniques of different metallic matrices, as well as the interaction and influence on properties.

MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, mechanical and tribological properties of cold sprayed Cu-W coatings

Vladislav S. Shikalov et al.

Summary: This paper presents the investigation results of copper-tungsten coatings with different compositions on aluminum alloy substrates. It was found that increasing tungsten content in the coatings improves their microhardness and Young's modulus, as well as bonding strength. Cu-W coatings show better wear resistance compared to pure copper coatings under dry sliding wear conditions.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Interaction between Fe66Cr10Nb5B19 metallic glass and aluminum during spark plasma sintering

Dina V. Dudina et al.

Summary: In this study, the interaction between Fe66Cr10Nb5B19 metallic glass and aluminum during spark plasma sintering (SPS) was investigated, revealing the formation of reaction layers around the Fe-based cores. The Vickers hardness of composites increased with higher sintering temperatures due to the formation of thicker reaction layers at the interface. Comparison with traditional sintering methods suggests that interfacial resistance may play a crucial role in influencing reaction advancement and formation of intermetallics in metal matrix composites.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Coatings & Films

Cold spray deformation and deposition of blended feedstock powders not necessarily obey the rule of mixture

Roghayeh Nikbakht et al.

Summary: The study aims to explore the process-structure relation of mixed Ni-Ti powders in cold spray to achieve a coating with the composition of interest. Experiments and modeling showed that mixed powders experience higher degree of deformation during impact, resulting in finer grain sizes, particularly for Ti in composite coatings with an average grain size of 500 nm.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Current Research Status on Cold Sprayed Amorphous Alloy Coatings: A Review

Qiang Wang et al.

Summary: Amorphous alloys exhibit excellent corrosion and wear resistance, making them ideal for various engineering applications. Cold spray technology offers unique advantages in preparing fully amorphous alloy coatings, with researchers analyzing challenges in the process and looking towards future developments.

COATINGS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Processing of Fe-Based Alloys by Detonation Spraying and Spark Plasma Sintering

Ivanna D. Kuchumova et al.

Summary: This study compared the structure and properties of iron-based amorphous alloys produced by detonation spraying and spark plasma sintering, finding that detonation spraying can produce coatings with an amorphous phase as the main phase, and the wear resistance of these coatings is superior to that of sintered alloys.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Al-Fe66Cr10Nb5B19 Metallic Glass Powder Mixtures

Dina V. Dudina et al.

Summary: The study focuses on evaluating metallic glasses as alternative reinforcements for aluminum matrix composites and track the structure evolution of composites with partial interaction between the matrix and metallic glass during sintering. It aims to study the microstructure and mechanical properties of composites obtained by spark plasma sintering (SPS) and compare materials with layers of interfacial reaction products of different thicknesses to analyze the influence of microstructural features on their strength.

METALS (2021)

Add to Collection

Article Chemistry, Physical

Effect of heat treatment on erosion-corrosion of Fe-based amorphous alloy coating under slurry impingement

Fei Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Heat-Treatment of Aluminium-Nickel Composite Cold Sprayed Coating

Marcin Winnicki et al.

COATINGS (2020)

Add to Collection

Article Chemistry, Physical

Microstructural characteristics and mechanical properties of the Al-Si coating on press hardened 22MnB5 steel

Lawrence Cho et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Engineering, Multidisciplinary

Overview of cold spray coatings applications and comparisons: a critical review

Santosh Kumar et al.

WORLD JOURNAL OF ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification

Ozge Balci et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Coatings & Films

Influence of nozzle velocity and powder feed rate on the coating mass and deposition efficiency in cold spraying

S. Klinkov et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Amorphous Steel Coatings Deposited by Cold-Gas Spraying

Mario Tului et al.

METALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgye

W. W. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Chemistry, Physical

Al-based matrix composites reinforced with short Fe-based metallic glassy fiber

Zhi Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Materials Science, Coatings & Films

Annealing Effect on the Intermetallic Compound Formation of Cold Sprayed Fe/Al Composite Coating

Hong-Tao Wang et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Coatings & Films

B4C/Ni Composite Coatings Prepared by Cold Spray of Blended or CVD-Coated Powders

C. Feng et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure and corrosion resistance of Fe-Al intermetallic coating on 45 steel synthesized by double glow plasma surface alloying technology

Zhu Xiao-lin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)

Add to Collection

Article Materials Science, Coatings & Films

Microstructural characterization of cold-sprayed nanostructured FeAl intermetallic compound coating and its ball-milled feedstock powders

Hong-Tao Wang et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Composites

Cold spraying of in situ produced TiB2-Cu nanocomposite powders

J. S. Kim et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Chemistry, Physical

Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits

T. Novoselova et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Integrated characterization of cold sprayed aluminum coatings

W. B. Choi et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Materials Science, Coatings & Films

Coating deposition by the kinetic spray process

ZB Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Coatings & Films

Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray

T Novoselova et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.