4.7 Article

Dual-objective building retrofit optimization under competing priorities using Artificial Neural Network

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

BIM-based retrofit method (RBIM) for building envelope thermal performance optimization

Taki Eddine Seghier et al.

Summary: This research proposes a method for retrofitting building envelope thermal performance using retrofit building information modeling (RBIM), which achieves a tradeoff design set between minimizing overall thermal transfer value (OTTV) and minimizing retrofit cost. The developed system integrates BIM authoring tools, visual scripting, and a customized non-dominated sorting genetic algorithm to provide a valuable design decision support system for retrofitting building envelope thermal performance.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Integration of phasing on multi-objective optimization of building stock energy retrofit

Yannis Merlet et al.

Summary: This article presents a methodology for improving the efficiency of buildings by helping building stock or real estate managers make decisions on energy retrofit. The methodology utilizes multiobjective optimization and incorporates a temporal dimension for construction phasing. The case study demonstrates the importance of formulating the optimization problem considering real-world constraints.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Thermal comfort prediction of the existing housing stock in southern Spain through calibrated and validated parameterized simulation models

Carmen Maria Calama-Gonzalez et al.

Summary: This paper focuses on assessing the current performance of one of the most representative building typologies in the social housing stock in southern Spain, predicting indoor thermal comfort results at the stock level. By using physical, constructive, and geometrical building characterization and selecting a calibrated and validated case study, parameterized energy simulation models are generated to provide statistically representative samples of the stock.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Multi-objective optimization of daylight performance and thermal comfort in classrooms with light-shelves: Case studies in Tehran and Sari, Iran

Navid Ziaee et al.

Summary: Efficient daylight design in educational buildings is crucial for student visual comfort and productivity, while reducing energy consumption. Excess daylight entry can lead to discomfort and overheating, emphasizing the importance of defining optimal daylight control device designs. This study investigates the effect of sky cloudiness on optimal light-shelf properties for typical classrooms and identifies the best options for classrooms in two cities, Tehran and Sari. Optimized light shelves enhance daylight and thermal comfort, with different optimal properties based on sky conditions in each city.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

A two-stage multi-objective optimization method for envelope and energy generation systems of primary and secondary school teaching buildings in China

Yizhe Xu et al.

Summary: This paper proposes a two-stage multi-objective optimization method based on a meta-model to obtain the optimal design scheme for primary and secondary school education buildings, considering both energy and cost. The effectiveness of the two-stage optimization method is verified by a typical teaching building in Nanjing, showing that optimal building envelope design and photovoltaic system parameters can be achieved for improved energy efficiency and cost-effectiveness.

BUILDING AND ENVIRONMENT (2021)

Article Thermodynamics

Optimizing energy efficiency and thermal comfort in building green retrofit

Qing Li et al.

Summary: The study presents a simulation-based energy-comfort optimization model to evaluate design alternatives and balance multiple objectives in building green retrofit, using a school building in Wuhan city of China as a case study. Four critical building parameters were identified to significantly impact energy efficiency and thermal comfort, resulting in approximately 4% energy savings with an improved level of environmental comfort. This research benefits designers and construction managers in achieving better energy efficiency and comfort in green building development.

ENERGY (2021)

Article Construction & Building Technology

Application of machine learning to estimate building energy use intensities

R. K. Veiga et al.

Summary: This study demonstrates the application of machine learning to estimate building energy use intensities of bank branches buildings in Brazil. The Support Vector Machine is identified as the most accurate model for benchmarking purposes. By optimizing sophisticated machine learning techniques, the model accuracy is significantly improved, showing high practical value.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

A metamodel-based multi-objective optimization method to balance thermal comfort and energy efficiency in a campus gymnasium

Naihua Yue et al.

Summary: This study proposes a new approach for multi-objective optimization in gymnasium design, combining NSGA-II with MLPANN metamodel. The method couples LHS with PCA to minimize training samples and ensure accuracy. The optimization results show significant reductions in energy consumption and improved thermal comfort, proving to be an efficient tool for gymnasium design.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

A multi-objective home energy management system for explicit cost-comfort analysis considering appliance category-based discomfort models and demand response programs

Oguzkagan Alic et al.

Summary: Residential consumers can use home energy management systems to adjust their energy usage in response to time-varying prices, aiming to reduce costs while maintaining comfort. The study focuses on developing models for discomfort and proposes a multi-objective HEMS that achieves cost savings for consumers without causing significant discomfort. Results show that consumers can strike a balance between cost-saving and a comfortable lifestyle through explicit cost-comfort analysis.

ENERGY AND BUILDINGS (2021)

Article Chemistry, Multidisciplinary

Typology Selection of Retaining Walls Based on Multicriteria Decision-Making Methods

Belen Munoz-Medina et al.

Summary: This article proposes a methodology to study and compare various alternative solutions and selection criteria to find the most ideal solution for constructing retaining walls in different environments. By establishing the relative importance of each criterion and applying different decision-making methods, the most suitable solution for each situation can be successfully selected. The methodology can be applied to the selection of other types of structures in future projects.

APPLIED SCIENCES-BASEL (2021)

Article Construction & Building Technology

Simulation and optimal control of heating and cooling systems: A case study of a commercial building

Phillipe R. Sampaio et al.

Summary: This paper introduces a novel energy conservation measure that optimizes the planning of heating and cooling systems for tertiary sector buildings. By using a grey-box model for predictive control and black-box multiobjective optimization for model calibration, the proposed approach aims to reduce energy consumption while maintaining indoor thermal comfort.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

Multi-objective optimization of building energy performance and indoor thermal comfort by combining artificial neural networks and metaheuristic algorithms

Badr Chegari et al.

Summary: A new efficient multi-objective optimization method based on the BPO technique has been developed to improve indoor thermal comfort and energy performance of residential buildings in a Moroccan region. Results show significant reduction in thermal needs and improvement in indoor thermal comfort, with solutions using MOPSO showing best performance. The methodology is recommended for designers, engineers, architects, and engineering offices when considering multiple design variables and objectives.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

Are low-income mass housing envelops energy efficient and comfortable? A multi-objective evaluation in warm-humid climate

Roshmi Sen et al.

Summary: This study evaluates and compares the performance of commonly constructed mass housing envelops in India with alternative building envelop constructions, finding various potential alternative construction technologies such as rat trap bonded brick walls and glass fibre reinforced gypsum construction, which show potential advantages in a multi-objective evaluation framework.

ENERGY AND BUILDINGS (2021)

Article Energy & Fuels

Sustainable siting and design optimization of hybrid renewable energy system: A geospatial multi-criteria analysis

M. R. Elkadeem et al.

Summary: This paper aims to develop a systematic and conceptual decision-making framework for site suitability and optimal design of HRESs in Kenya, Sub-Saharan Africa. The study combines GIS and BWM to spatially investigate potential sites for solar, wind, and hybrid systems, followed by E3 design optimization and MCDM analysis to determine the best sustainable solution for the region. The results show that a solar/wind/diesel/battery HRES system is the most cost-effective and environmentally friendly option for electrification in the studied region.

APPLIED ENERGY (2021)

Article Construction & Building Technology

A fuzzy robust multi-objective optimization model for building energy retrofit considering utility function: A university building case study

Mohammad Pazouki et al.

Summary: This study utilizes mathematical modeling to determine the best strategy for building energy retrofit, considering economic and environmental criteria and using a generalized mathematical model to optimize energy efficiency. The results indicate that implementing the obtained strategy can significantly affect buildings' energy saving.

ENERGY AND BUILDINGS (2021)

Review Construction & Building Technology

A review of data-driven building performance analysis and design on big on-site building performance data

Zhichao Tian et al.

Summary: Building performance design is crucial for achieving high-performance buildings and can be analyzed and designed using data-driven methods. Previous simulation-based design has been questioned, but now on-site building performance data can be utilized for analysis. Data-driven methods are commonly used for estimating energy consumption and exploring energy trends.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Construction & Building Technology

A machine-learning-based method for thermal design optimization of residential buildings in highly urbanized areas of Turkey

Sadik Yigit

Summary: The Turkish government mandated energy-efficient building construction in 2008, leading researchers to propose surrogate model optimization techniques as an alternative to time-consuming simulations for optimizing building designs.

JOURNAL OF BUILDING ENGINEERING (2021)

Article Construction & Building Technology

Multi-objective optimization of building energy performance using a particle swarm optimizer with less control parameters

Zhang Yong et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Article Multidisciplinary Sciences

Are MCDA Methods Benchmarkable? A Comparative Study of TOPSIS, VIKOR, COPRAS, and PROMETHEE II Methods

Wojciech Salabun et al.

SYMMETRY-BASEL (2020)

Article Construction & Building Technology

Comparative study of machine learning-based multi-objective prediction framework for multiple building energy loads

X. J. Luo et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Article Construction & Building Technology

Developing data-driven models for energy-efficient heating design in office buildings

Zhichao Tian et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Review Construction & Building Technology

Surrogate modelling for sustainable building design - A review

Paul Westermann et al.

ENERGY AND BUILDINGS (2019)

Article Construction & Building Technology

Prerequisites for reliable sensitivity analysis of a high fidelity building energy model

Steffen Petersen et al.

ENERGY AND BUILDINGS (2019)

Review Green & Sustainable Science & Technology

A review of data-driven approaches for prediction and classification of building energy consumption

Yixuan Wei et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Thermodynamics

An approach for building design optimization using design of experiments

Jay Dhariwal et al.

BUILDING SIMULATION (2017)

Article Construction & Building Technology

Ant colony algorithm for building energy optimisation problems and comparison with benchmark algorithms

Keivan Bamdad et al.

ENERGY AND BUILDINGS (2017)

Article Construction & Building Technology

A new methodology for cost-optimal analysis by means of the multi-objective optimization of building energy performance

Fabrizio Ascione et al.

ENERGY AND BUILDINGS (2015)

Review Green & Sustainable Science & Technology

A review on applications of ANN and SVM for building electrical energy consumption forecasting

A. S. Ahmad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Automation & Control Systems

Consistencies and Contradictions of Performance Metrics in Multiobjective Optimization

Siwei Jiang et al.

IEEE TRANSACTIONS ON CYBERNETICS (2014)

Article Construction & Building Technology

Neural network and polynomial approximated thermal comfort models for HVAC systems

M. Castilla et al.

BUILDING AND ENVIRONMENT (2013)

Article Construction & Building Technology

Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design

Shady Attia et al.

ENERGY AND BUILDINGS (2013)

Article Management

Extended VIKOR method in comparison with outranking methods

Serafim Opricovic et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2007)

Article Management

Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS

S Opricovic et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2004)

Article Computer Science, Artificial Intelligence

A fast and elitist multiobjective genetic algorithm: NSGA-II

K Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)

Article Construction & Building Technology

EnergyPlus: creating a new-generation building energy simulation program

DB Crawley et al.

ENERGY AND BUILDINGS (2001)

Article Computer Science, Interdisciplinary Applications

Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates

IM Sobol

MATHEMATICS AND COMPUTERS IN SIMULATION (2001)