☆ 4.7 Article

Effect of graphene nanoplatelets on engineering properties of fly ash-based geopolymer concrete containing crumb rubber and its optimization using response surface methodology

JOURNAL OF BUILDING ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

The Effect of Pristine Graphene on the Mechanical Properties of Geopolymer Mortar

Oluwapelumi Abiodun et al.

Summary: This study focuses on enhancing the mechanical properties of geopolymer composite by preparing pristine graphene-reinforced geopolymer mortar. The addition of 0.07% dosage of pristine graphene significantly improves the compressive, tensile, and flexural strengths of the geopolymer mortar. This research demonstrates the potential of large-size industrially produced pristine graphene in revolutionizing sustainable construction materials.

SUSTAINABILITY (2023)

Add to Collection

Review Construction & Building Technology

Geopolymers made of recycled brick and concrete powder - A critical review

Taohua Ye et al.

Summary: This paper presents an overview of published articles on geopolymers containing recycled brick powder (RBP) and/or recycled concrete powder (RCP) from 2012 to 2021. The activation process, fundamental properties, and influencing factors are discussed. The carbon emission of geopolymers with a strength beyond 40 MPa is calculated, confirming the feasibility of using RBP and/or RCP as precursors. Potential proportions for sustainable high-performance geopolymers are provided.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Role of recycled vehicle tires quantity and size on the properties of metakaolin-based geopolymer rubberized concrete

Abdulrahman Albidah et al.

Summary: The increasing demand for high-strength concrete construction has led to concerns over the carbon dioxide emissions and resource consumption caused by the production of conventional cement. This study explores the potential use of geopolymer or alkali-activated composites and recycled rubber as alternatives to cement-based binders. The results show that introducing recycled rubber into metakaolin-based geopolymer mixes can enhance the workability, flexural strength, and compressive strength of the concrete, making it suitable for non-structural and structural applications in construction.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Civil

The effect of scoria, perlite and crumb rubber aggregates on the fresh and mechanical properties of geopolymer concrete

Fatemeh Hamidi et al.

Summary: This study focuses on the assessment of fresh and mechanical performance of geopolymer concrete technologies, specifically rubberised geopolymer concrete (RGC) and lightweight geopolymer concrete (LWGC). The results showed that RGC exhibited improved flowability, compressive and tensile strengths, and strain-hardening behavior compared to plain GC. LWGC, on the other hand, had issues with segregation at certain proportions of lightweight aggregates. The mechanical properties of LWGC improved within a specific range of scoria content.

STRUCTURES (2022)

Add to Collection

Review Construction & Building Technology

Crumb rubber as partial replacement for fine aggregate in concrete: An overview

Fengming Ren et al.

Summary: This paper reviews the performance of concrete with crumb rubber as fine aggregate, providing evidence for crumb rubber concrete (CRC) materials design and application. The study finds that crumb rubber has an impact on the workability and bonding performance of the concrete, but its performance can be improved through pre-treatments. Additionally, strength reduction and durability performance are important aspects to consider.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Materials Science, Ceramics

Rubberized geopolymer composites: A comprehensive review

Shaker M. A. Qaidi et al.

Summary: This paper presents a comprehensive analysis of the environmental and economic impact, resources, and physicochemical properties of waste rubber, as well as the behaviors and properties of rubberized geopolymer concrete (Ru-GPC). The effect of crumb rubber (CRu) substitution on critical properties is addressed critically. The study also highlights the applications, embodied CO2 emissions, and cost analysis of Ru-GPC.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Application of graphene-based materials in developing sustainable infrastructure: An overview

Nilofar Asim et al.

Summary: Graphene and graphene-based materials have great potential in the construction industry, improving the performance and properties of building materials. However, their research and application trends are not remarkable and face challenges in terms of modification, stability, compatibility, and dispersion.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Compressive and flexural characteristics of geopolymer rubberized concrete reinforced with recycled tires steel fibers

Abdulaziz S. Alsaif et al.

Summary: The manufacturing of ordinary Portland cement concrete generates carbon dioxide and causes air pollution. Geopolymer concrete and the incorporation of waste tire materials into concrete have shown potential as sustainable alternatives with improved properties. This paper investigates the compressive and flexural behaviors of geopolymer concrete made with and without rubber and/or steel fibers, demonstrating the synergy between these materials and their use as a semi-flexible composite with adequate strength and improved ductility. This makes it an ideal alternative material for industrial floors and pavement.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable use of recycled carbon fiber reinforced polymer and crumb rubber in concrete: mechanical properties and ecological evaluation

Chen Xiong et al.

Summary: This study investigates the feasibility of using recycled CFRP fiber reinforced rubberized concrete (RFRRC) to improve material properties and reduce environmental pollution. The results show that RFRRC enhances ductility, flexural toughness, impact resistance and energy absorption capacity. Application of RFRRC in construction fields can substantially reduce CO2 emissions and benefit the ecological environment.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Multidisciplinary

Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber

Junhong Ye et al.

Summary: A novel ultra-high ductile concrete (UHDC) modified with crumb rubber was developed for 3D concrete printing. Mechanical tests revealed that the printed UHDC had higher deformability and energy dissipation in certain directions compared to mold-cast UHDC. Additionally, minimal anisotropy was found in flexural strength, but significant anisotropy in flexural deformability, compressive strength and flexural energy dissipation capacity of the printed UHDC.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Mechanical performance and optimization of high-volume fly ash concrete containing plastic wastes and graphene nanoplatelets using response surface methodology

Musa Adamu et al.

Summary: The study found that plastic waste and graphene nanoplatelets have a significant impact on the properties of high-volume fly ash concrete, with plastic waste and fly ash reducing the strength and water absorption of the concrete, while graphene nanoplatelets enhance them.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Engineering properties and sustainability assessment of recycled fibre reinforced rubberised cementitious composite

Meng Chen et al.

Summary: This study investigates the feasibility of using recycled tire materials in cementitious mortar, with results showing that replacing manufactured fibers with recycled tire fibers can reduce production costs, embodied carbon, and energy consumption while enhancing engineering properties. The optimal mixture includes 5%-10% CR, 1.0 vol% RTS fiber, and 0.5 vol% RTP fiber for improved performance, cost efficiency, and reduced environmental impact.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: A review

Shaker M. A. Qaidi et al.

Summary: The disposal of waste rubber tires has become a major ecological issue globally due to their prolonged degrading period and severe hazard to the environment. Recycling waste rubber as construction material can help preserve depleting natural aggregate sources and protect the environment. This paper reviews research on using crumb rubber as eco-friendly aggregates in concrete and its impact on fresh and mechanical properties, aiming to update the database for further experimental and numerical research on rubberized concrete.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Construction & Building Technology

Advances in multifunctional graphene-geopolymer composites

Tianxiang Huang et al.

Summary: Geopolymer is an alternative to Portland cement for civil infrastructures, with enhanced mechanical and electrical behaviors achieved by incorporating graphene. The synthesized graphene-geopolymer composites possess functionalities for future infrastructures, but current investigations are still in the laboratory level, facing challenges for further research.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical Strength of Graphene Reinforced Geopolymer Nanocomposites: A Review

Chai Hua Tay et al.

Summary: The combination of graphene and geopolymer can enhance the strength and competitiveness of concrete, potentially becoming a commercial choice for new green concrete.

FRONTIERS IN MATERIALS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Studies on Self-Compacting geopolymer concrete containing flyash, GGBS, wollastonite and graphene oxide

N. Vishnu et al.

Summary: This paper discusses the durability and mechanical properties of self-compacting geopolymer concrete using fly ash, GGBS, wollastonite, and graphene oxide. The results show that mixes containing wollastonite and graphene exhibit better performance.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Polymer Science

Polypropylene/graphene nanoplatelets nanocomposites with high conductivity via solid-state shear mixing

Xiaoliang Zhao et al.

Summary: This study proposes a new method involving solid-state shear mixing to achieve well-dispersed graphene nanoplatelets within a polymer matrix, leading to significant enhancements in comprehensive properties such as antistatic properties, mechanical properties, and thermal stability. Additionally, the impact strength, heat distortion temperature, and initial decomposition temperature of the nanocomposite are improved, providing an effective reference for industrial preparation of polymer-based graphene nanocomposites.

E-POLYMERS (2021)

Add to Collection

Article Construction & Building Technology

Rheological properties of mortar containing recycled powders from construction and demolition wastes

Zhenhua Duan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Utilization potential of aerated concrete block powder and clay brick powder from C&D waste

Qiong Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of carbon nanotubes on properties of alkali activated slag - A mechanistic study

Hongzhi Cui et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash geopolymer concrete

Peem Nuaklong et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Environmental performance and durability of concrete incorporating waste tire rubber and steel fiber subjected to acid attack

Soudabeh Dezhampanah et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Thermodynamics

Stability of nanofluid: A review

Samarshi Chakraborty et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Influence of Dispersing Method on the Quality of Nano-Admixtures Homogenization in Cement Matrix

Elzbieta Horszczaruk et al.

MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

Effect of wollastonite microfibers as cement replacement on the properties of cementitious composites: A review

Ziming He et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Review on the research progress of cement-based and geopolymer materials modified by graphene and graphene oxide

Changjiang Liu et al.

NANOTECHNOLOGY REVIEWS (2020)

Add to Collection

Article Construction & Building Technology

Effect of pristine and functionalized carbon nanotubes on microstructural, rheological, and mechanical behaviors of metakaolin-based geopolymer

Graziele da Luz et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Performance of geopolymer concrete containing recycled rubber

Aly Muhammed Aly et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Development of rubberized geopolymer concrete: Strength and durability studies

Salmabanu Luhar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Engineering, Civil

Potential use of rubber as aggregate in structural reinforced concrete element - A review

Kristina Strukar et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Review Construction & Building Technology

Properties and utilizations of waste tire rubber in concrete: A review

Ayesha Siddika et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Durability characteristics of lightweight rubberized concrete

Thong M. Pham et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Selection of dispersants for stabilization of unfunctionalized carbon nanotubes in high pH aqueous suspensions: Application to cementitious matrices

J. A. Bogas et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Physical and Microstructure Properties of Geopolymer Nanocomposite Reinforced with Carbon Nanotubes

Pongsak Jittabut et al.

MATERIALS TODAY-PROCEEDINGS (2019)

Add to Collection

Article Construction & Building Technology

Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC

Weina Meng et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Mechanical and thermal properties of lightweight geopolymer mortar incorporating crumb rubber

Ampol Wongsa et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable concrete: Building a greener future

Lateef Assi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic effects of processing and nanofiber reinforcement on the mechanical and ferroelectric performance of geopolymer matrix composites

Akm S. Rahman et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

Add to Collection

Article Construction & Building Technology

Life cycle assessment of geopolymer concrete

Daniel A. Salas et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire

Shuaicheng Guo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Chemistry, Physical

Temperature- and pH-Dependent Dispersion of Highly Purified Multiwalled Carbon Nanotubes Using Polycarboxylate-Based Surfactants in Aqueous Suspension

Marco Liebscher et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Engineering, Multidisciplinary

Synergy effect of carbon nano-fillers on the fracture toughness of structural composites

C. Kostagiannakopoulou et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Review Construction & Building Technology

Incorporation of nano-materials in cement composite and geopolymer based paste and mortar - A review

Mathialagan Sumesh et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Materials Science, Ceramics

Mechanical properties of geopolymer concrete exposed to dynamic compression under elevated temperatures

Haoyang Su et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Ceramics

Effects of treatment temperature on the reduction of GO under alkaline solution during the preparation of graphene/geopolymer composites

Shu Yan et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers

Weina Meng et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Investigation on characteristics of blended cements containing pumice

Hayati Ulusu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Compressive strength of fly ash-based geopolymer concrete with crumb rubber partially replacing sand

Yeonho Park et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

TiO2-Based Photocatalytic Geopolymers for Nitric Oxide Degradation

Alberto Strini et al.

MATERIALS (2016)

Add to Collection

Proceedings Paper Construction & Building Technology

Effect of carbon nanotubes on the mechanical fracture properties of fly ash geopolymer

Pavel Rovnanik et al.

ECOLOGY AND NEW BUILDING MATERIALS AND PRODUCTS 2016 (2016)

Add to Collection

Article Construction & Building Technology

Graphene nanoplatelet-fly ash based geopolymer composites

Navid Ranjbar et al.

CEMENT AND CONCRETE RESEARCH (2015)

Add to Collection

Review Engineering, Manufacturing

Review of nanocarbon-engineered multifunctional cementitious composites

Baoguo Han et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Environmental

Multiwalled Carbon Nanotube Dispersion Methods Affect Their Aggregation, Deposition, and Biomarker Response

Xiaojun Chang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Construction & Building Technology

Effects of elevated temperatures on the thermal behavior and mechanical performance of fly ash geopolymer paste, mortar and lightweight concrete

Omar A. Abdulkareem et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates

Blessen Skariah Thomas et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes

Azam Yousefi et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Multifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites

Mohamed Saafi et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures

Zhu Pan et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Materials Science, Ceramics

Toughening of zirconia/alumina composites by the addition of graphene platelets

Jian Liu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Higher Dispersion Efficacy of Functionalized Carbon Nanotubes in Chemical and Biological Environments

Elena Heister et al.

ACS NANO (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene and Graphene Oxide: Synthesis, Properties, and Applications

Yanwu Zhu et al.

ADVANCED MATERIALS (2010)

Add to Collection

Article Construction & Building Technology

Performance of an alkali-activated slag concrete reinforced with steel fibers

Susan Bernal et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Review Construction & Building Technology

Nanotechnology in concrete - A review

Florence Sanchez et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Article Polymer Science

Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites

Xin Zhao et al.

MACROMOLECULES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Electrical and mechanical properties of aluminosilicate inorganic polymer composites with carbon nanotubes

Kenneth J. D. MacKenzie et al.

JOURNAL OF MATERIALS SCIENCE (2009)

Add to Collection

Article Construction & Building Technology

Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber

Zhang Yunsheng et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Add to Collection

Article Chemistry, Physical

Dispersion of nanoparticle clusters by ball milling

Adam J. Kowalski et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Review Materials Science, Multidisciplinary

Processing of nanographene platelets (NGPs) and NGP nanocomposites: a review

B. Z. Jang et al.

JOURNAL OF MATERIALS SCIENCE (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites

Tiesong Lin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Engineering, Environmental

Properties of concrete containing scrap-tire rubber - an overview

R Siddique et al.

WASTE MANAGEMENT (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.