☆ 4.7 Article

Performance improvement of waste oyster-shell powder-cement binary system via carbonation curing

JOURNAL OF BUILDING ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Ambient pressure carbonation curing of reinforced concrete for CO2 utilization and corrosion resistance

Xiangping Xian et al.

Summary: Carbonation curing of concrete is an emerging technology that improves material properties and sequesters CO2 in cement matrix. Utilizing this technology in reinforced concrete can enhance its CO2 utilization potential and corrosion resistance. However, controlling carbonation corrosion remains a challenge.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Construction & Building Technology

Pathways towards sustainable concrete

D. Coffetti et al.

Summary: This paper discusses various alternative strategies to improve the sustainability of concrete, including applying the latest technologies to manufacture traditional Portland cement, substituting traditional constituents with alternative binders, using recycled aggregates and non-drinking water, and developing high-durability/high-performance mixtures. The paper also highlights the importance of upgrading existing standards and educating designers, researchers, and contractors to promote the development and diffusion of new concrete technologies. It proposes a new sustainability index for mortars and concretes manufactured with negative carbon footprint materials.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Effect of temperature on CO2 curing, compressive strength and microstructure of cement paste

Bao Lu et al.

Summary: This study investigated the effect of temperature on the carbonation process, compressive strength, and microstructure of CO2-cured cement paste. The results showed that temperature significantly influenced the carbonation rate and the improvement of cement paste's properties. Temperature also had a significant impact on the structural transformation, morphological changes, and size and amounts of calcium carbonate polymorphs.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Towards carbon neutrality: A study on China's long-term low-carbon transition pathways and strategies

Jiankun He et al.

Summary: As the world's largest carbon emitter, China must make significant efforts to peak its emissions by 2030 and achieve carbon neutrality by 2060. This study examines different scenarios and evaluates the pathways, energy transformation, technology, policy, and investment demands necessary for carbon neutrality. The findings highlight the challenges and investment requirements for China to achieve its carbon neutrality goals.

ENVIRONMENTAL SCIENCE AND ECOTECHNOLOGY (2022)

Add to Collection

Article Construction & Building Technology

Impact of nano-TiO2 addition on the reduction of net CO2 emissions of cement pastes after CO2 curing

Carlos Moro et al.

Summary: This study found that the addition of nano-TiO2 can enhance CO2 uptake of cement paste during CO2 curing, but the optimal effect on compressive strength varies. Selecting an adequate functional unit for analysis is crucial for accurate assessment.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Influence of an extrusion approach on the fiber orientation and mechanical properties of engineering cementitious composite

Zhi Ge et al.

Summary: The extrusion approach proposed in the study significantly improved fiber alignment in ECC and increased flexural strength. It was found that specimens prepared using this approach exhibited higher fiber orientation factor and better crack resistance compared to the conventional casting method.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effects of cement types and addition of quartz and limestone on the normal and carbonation curing of cement paste

Run-Sheng Lin et al.

Summary: The addition of quartz can effectively accelerate the carbonation process and improve the compressive strength of cement paste during carbonation curing. Late-age strength mainly depends on the amount of cement, and the addition of quartz increases porosity in the cement paste, thus enhancing the carbonation efficiency.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Synthesis and characterization of cement clinker using recycled pulverized oyster and scallop shell as limestone substitutes

Sungwun Her et al.

Summary: Developments in the aquaculture industry have increased shellfish production, but the lack of proper recycling methods for discarded shells is causing marine environmental pollution. By using pulverized oyster and scallop shells as raw materials in cement production, it has been found that they can be suitable substitutes for limestone, indicating a sustainable alternative.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Investigation of carbonation performance of polymer-phosphazene concrete using Taguchi optimization method

Harun Tanyildizi

Summary: The study experimentally and statistically investigated the effects of curing time, carbonation time, phosphazene percentage, and cement content on the carbonation resistance of polymer-phosphazene concrete. Cement content was found to be the experimental variable that most affected the results, with the effect percentage ranging between 34.43% and 72.94% in Anova analysis. According to Taguchi results, the optimal experimental variables for maximum splitting tensile strength, maximum UPV, minimum weight change, and minimum carbonation depth were found to be 14 days for carbonation time, 3% for phosphazene percentage, 365 days for curing time, and 450 kg/m(3) for cement content.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Hydration Model and Evaluation of the Properties of Calcined Hwangtoh Binary Blends

Han-Seung Lee et al.

Summary: Calcined hwangtoh is increasingly used as a mineral admixture in concrete industry. This study proposed a hydration model for cement-hwangtoh blends and evaluated properties using reaction degrees of binders. The interaction between cement and hwangtoh reactions were found to progress through three processes, leading to good agreement with experimental results in chemical, mechanical, thermal, and durability aspects.

INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Fundamental understanding of carbonation curing and durability of carbonation-cured cement-based composites: A review

Zhuo Liu et al.

Summary: This paper discusses the application and challenges of carbonation curing technology in cement-based composites, focusing on issues such as low CO2 sequestration rate and its impact on durability.

JOURNAL OF CO2 UTILIZATION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Strength and durability improvements of biochar-blended mortar or paste using accelerated carbonation curing

Xu Yang et al.

Summary: The study showed that biochar-blended mortar had higher carbonation degree and strength under accelerated carbonation curing, with lower electrical resistivity and chloride diffusion coefficients compared to plain specimens. Analysis using XRD, FTIR, and TGA can provide information on the chemical composition and properties changes in ACC specimens.

JOURNAL OF CO2 UTILIZATION (2021)

Add to Collection

Article Construction & Building Technology

Amino acids as performance-controlling additives in carbonation-activated cementitious materials

Rakibul I. Khan et al.

Summary: This study investigated the application of amino acids in controlling CaCO3 crystallization in carbonation cured wollastonite composites. The use of amino acids resulted in the formation of stable ACC, vaterite, and aragonite, as well as enhanced flexural and compressive strength of the composites. These improvements were attributed to the reduced critical pore size and the formation of organic-inorganic hybrid phases in the matrix.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Effect of alkalis on products of enforced carbonation of cement paste

Maciej Zajac et al.

Summary: This study presents a new carbon capture and utilization technology by enforcing wet carbonation of cement fines from recycled concrete, and applying them as SCMs in new composite cements. Alkalis have a significant impact on the properties of carbonation products, affecting the crystal size of calcium carbonate precipitates and altering the structure of alumina-silica gel. Additionally, alkalis in the solution directly influence the sulphate content of the carbonated cement paste.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Microstructure of cement paste subject to ambient pressure carbonation curing

Xiangping Xian et al.

Summary: This study found that ambient pressure carbonation can achieve comparable carbon uptake and strength gain as high pressure carbonation at both early and late age, making it more economic and practical for precast products. Nitrogen adsorption/desorption results revealed that ambient pressure performed better than high pressure in reducing the cumulative pore volume and refining the capillary pore size.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Influence of sisal fibers on the mechanical performance of ultra-high performance concretes

Guosheng Ren et al.

Summary: The study found that the length and volume fraction of sisal fibers have an impact on the flowability of UHPC mixtures, with a certain amount of longer fibers improving the flexural strength and toughness of UHPC. The pull-out load and pull-out energy also increase with the length of fibers.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Impacts of reducing air pollutants and CO2 emissions in urban road transport through 2035 in Chongqing, China

Linfeng Duan et al.

Summary: The study in Chongqing's road transport sector found that shifting transportation modes scenario presented the most significant potential for energy-saving and emission reductions, while improving energy efficiency also provided significant co-benefits for reducing air pollutants and CO2 emissions. However, promoting alternative fuel scenario may increase fine particulate matter (PM2.5) emissions compared to business as usual scenario.

ENVIRONMENTAL SCIENCE AND ECOTECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Examining the potential of calcined oyster shell waste as additive in high volume slag cement

Ali Naqi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Calcination characteristics of oyster shells and their comparison with limestone from the perspective of waste recycling

Suhyeon Ha et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)

Add to Collection

Article Construction & Building Technology

Influence of mineral admixtures on carbonation curing of cement paste

Ling Qin et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Fresh and hardened properties of self consolidating Portland limestone cement mortars: Effect of high volume limestone powder replaced by cement

Serhat Demirhan et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Combined experimental and numerical study of uniaxial compression failure of hardened cement paste at micrometre length scale

Hongzhi Zhang et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste

Baoguo Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Review Construction & Building Technology

Recycling of seashell waste in concrete: A review

Kim Hung Mo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Accelerated carbonation curing of cement mortars containing cement kiln dust: An effective way of CO2 sequestration and carbon footprint reduction

Devender Sharma et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Review on carbonation curing of cement-based materials

Duo Zhang et al.

JOURNAL OF CO2 UTILIZATION (2017)

Add to Collection

Article Construction & Building Technology

Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation

Ning Li et al.

CEMENT AND CONCRETE RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

Assessment of the compressive strength of recycled waste LCD glass concrete using the ultrasonic pulse velocity

Chien-Chih Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Effect of further water curing on compressive strength and microstructure of CO2-cured concrete

Pingping He et al.

CEMENT & CONCRETE COMPOSITES (2016)

Add to Collection

Article Construction & Building Technology

Effects of limestone powder on CaCO3 precipitation in CO2 cured cement pastes

Zhenjun Tu et al.

CEMENT & CONCRETE COMPOSITES (2016)

Add to Collection

Article Construction & Building Technology

Microstructural densification and CO2 uptake promoted by the carbonation curing of belite-rich Portland cement

J. G. Jang et al.

CEMENT AND CONCRETE RESEARCH (2016)

Add to Collection

Article Construction & Building Technology

Indicator of carbonation front in concrete as substitute to phenolphthalein

Servando Chinchon-Paya et al.

CEMENT AND CONCRETE RESEARCH (2016)

Add to Collection

Article Construction & Building Technology

Effects of temperature and carbonation curing on the mechanical properties of steel slag-cement binding materials

Liu Qian et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Review Construction & Building Technology

Carbonation of cement-based materials: Challenges and opportunities

Warda Ashraf

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Review Construction & Building Technology

Carbonation of cement paste: Understanding, challenges, and opportunities

Branko Savija et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Carbonation Curing of Precast Fly Ash Concrete

Duo Zhang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Early carbonation curing of concrete masonry units with Portland limestone cement

Hilal El-Hassan et al.

CEMENT & CONCRETE COMPOSITES (2015)

Add to Collection

Article Construction & Building Technology

Limestone derived eggshell powder as a replacement in Portland cement mortar

P. Pliya et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Effect of limestone fillers on microstructure and permeability due to carbonation of cement pastes under controlled CO2 pressure conditions

Quoc Tri Phung et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Green & Sustainable Science & Technology

Properties of cement-based bricks with oyster-shells ash

Gengying Li et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Engineering, Environmental

In Situ Determination of Interfacial Energies between Heterogeneously Nucleated CaCO3 and Quartz Substrates: Thermodynamics of CO2 Mineral Trapping

Alejandro Fernandez-Martinez et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Add to Collection

Article Construction & Building Technology

Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network

Abid A. Shah et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Review Construction & Building Technology

Nondestructive evaluation of concrete strength: An historical review and a new perspective by combining NDT methods

D. Breysse

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Review Construction & Building Technology

New cements for the 21st century: The pursuit of an alternative to Portland cement

Caijun Shi et al.

CEMENT AND CONCRETE RESEARCH (2011)

Add to Collection

Article Construction & Building Technology

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

K. De Weerdt et al.

CEMENT AND CONCRETE RESEARCH (2011)

Add to Collection

Article Construction & Building Technology

Carbonation of CH and C-S-H in composite cement pastes containing high amounts of BFS

Paulo H. R. Borges et al.

CEMENT AND CONCRETE RESEARCH (2010)

Add to Collection

Article Multidisciplinary Sciences

Irreversible climate change due to carbon dioxide emissions

Susan Solomon et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2009)

Add to Collection

Article Construction & Building Technology

Investigation of the carbonation front shape on cementitious materials: Effects of the chemical kinetics

M. Thiery et al.

CEMENT AND CONCRETE RESEARCH (2007)

Add to Collection

Article Construction & Building Technology

Microstructural changes caused by carbonation of cement mortar

B Johannesson et al.

CEMENT AND CONCRETE RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.