☆ 4.7 Article

Evaluation of the ability of cement prepared with incineration fly ash to solidify heavy metals at high temperatures

JOURNAL OF BUILDING ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

Solidification/stabilization of lead-contaminated soils by phosphogypsum slag-based cementitious materials

Zhisheng Ren et al.

Summary: The present study designed a phosphogypsum slag-based cementitious material (PS) and investigated its potential use for solidifying/stabilizing lead-contaminated soils. The physicochemical properties, performance, and mechanisms of lead stabilization in soil were studied using various methods. The results showed that the PS solidified body had acceptable compressive strength for backfill treatments or roadbed materials. The leaching concentrations of lead were within the safety limit specified in Chinese standard, indicating the potential for safe disposal and reuse of PS stabilized soil.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

Add to Collection

Article Construction & Building Technology

Improve toxicity leaching, physicochemical properties of incineration fly ash and performance as admixture by water washing

Xiaodong Ma et al.

Summary: This study investigated the effects of water washing on the physico-chemical properties of incineration fly ash, its toxic leaching characteristics, and its performance as a cement admixture. The results showed that water washing could remove more than 90% of chlorine and some soluble substances, but heavy metals and dioxins could accumulate in the process. Washed ash could improve the pore structure and mechanical properties of cement, and there was no risk of heavy metal leaching. However, water washing was unable to remove dioxins, so it is necessary to dispose of dioxins and chlorides in order to reuse the water-washed incineration fly ash.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Quantitative evaluation of the characteristics of air voids and their relationship with the permeability and salt freeze-thaw resistance of hybrid steel-polypropylene fiber-reinforced concrete composites

Yan Wang et al.

Summary: Hybrid fiber affects the structure and performance of concrete by altering the characteristics of air voids. The relationship between air void structure and concrete permeability and salt freeze-thaw resistance is quantitatively analyzed. The hybrid ST-PP fiber can enhance the compressive strength and splitting tensile strength of concrete after salt F-T cycles, but has a negative effect on concrete permeability. Total air-void content, number of air voids, and tortuosity are key factors influencing the permeability and F-T resistance of concrete.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Spalling mechanism of carbon nanotube concrete at elevated temperature

Hao Lu et al.

Summary: The spalling response of Carbon Nanotube Concrete (CNTC) at elevated temperatures is influenced by the water cement ratio and the content of Carbon Nanotubes (CNTs). The tensile strength of CNTs and their bond strength with the concrete matrix can increase the total energy required for crack propagation, effectively reducing the formation and propagation of cracks. Additionally, the effects of crack bridging and increased porosity in the concrete matrix caused by CNTs can help prevent spalling, while filling pores may reduce spalling resistance in CNTC.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Energy & Fuels

The Effect of Adjusting Sinter Raw Mix on Dioxins from Iron Ore Co-Sintering with Municipal Solid Waste Incineration Fly Ash

Hao He et al.

Summary: The inhibitory effects of calcined lime and limestone on the formation of dioxins during iron ore co-sintering with fly ash were investigated. The results showed that adding 5 wt.% calcined lime and 3 wt.% limestone effectively reduced the concentration of dioxins in the flue gas. The distribution of dioxins was also affected, with an increase in low-chlorinated dioxins and a decrease in high-chlorinated dioxins, except for OCDD.

ENERGIES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Effect of High Temperature on Compressive Strength and Microstructure of Cement Paste Modified by Micro- and Nano-calcium Carbonate Particles

Mingli Cao et al.

Summary: Micro-calcium carbonate and nano-calcium carbonate can improve the microstructure and mechanical properties of cement and concrete, and their effects at high temperatures have been investigated.

FIRE TECHNOLOGY (2022)

Add to Collection

Article Construction & Building Technology

The research on mechanism of C-S-H nanocrystal improving early properties of shotcrete at low temperature by thermodynamic modelling

Yongdong Xu et al.

Summary: This study investigates the effect of CSH nanocrystals on shotcrete performance in a low-temperature environment. It was found that CSH nanocrystals can shorten setting time and improve early compressive strength of shotcrete. Combining CSH nanocrystals with Alkali free liquid accelerator can accelerate cement hydration reaction and promote hydration products formation.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Environmental Sciences

A comparative study on characteristics and leaching toxicity of fluidized bed and grate furnace MSWI fly ash

Chengcheng Fan et al.

Summary: Fluidized bed and grate furnace are commonly used technologies in municipal solid waste incineration, with MSWI fly ash consisting of calcium and chlorine salts, showing potential pozzolanic activity. Grate furnace MSWI fly ash contains higher levels of heavy metals and chlorides, posing greater environmental risks.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

Simulation of heavy metals behaviour during Co-processing of fly ash from municipal solid waste incineration with cement raw meal in a rotary kiln

Lei Wang et al.

Summary: This research examines the fixation behavior of Cd and Pb in industrial cement kilns and analyzes the effect of Cl loadings. It finds that Cd forms Cd(OH)2(g) in highly alkaline environments, while nearly 90% of Pb is volatilized as PbCl2(g). The results also show that increased Cl concentrations decrease the proportion of Pb and Cd in clinker but increase their concentrations in kiln dust.

WASTE MANAGEMENT (2022)

Add to Collection

Article Construction & Building Technology

Friedel's salt: Temperature dependence of thermoelastic properties

Tulio Honorio et al.

Summary: In this study, molecular simulations were performed to compute the physical properties of Friedel's salt and provide the temperature-dependent thermoelastic properties. These findings are important for the application of Friedel's salt data in multiscale modeling.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Potential of sulphoaluminate cement to solidify fluorine-containing sludge

Xiaodong Ma et al.

Summary: This study evaluated the effect of sulphoaluminate cement on the solidification of fluorine-containing sludge and composite performance. The results showed that fluorine-containing sludge could reduce heat release and prolong setting time. Sulphoaluminate cement effectively solidified the sludge under suitable conditions.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Benefits of using steel slag in cement clinker production for environmental conservation and economic revenue generation

Tianming Gao et al.

Summary: This study examines the feasibility and advantages of using steel slag instead of iron ore in cement production, highlighting the maximum substitution amount and specific resources, as well as the environmental and economic benefits. By optimizing raw meal quality indices and operational processes, it is possible to produce steel slag clinker that meets national standards.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material

Miao Ren et al.

Summary: The novel MPCM-UHPC composite material exhibits excellent thermal performance and mechanical properties, but the incorporation of MPCM has a negative effect on the mechanical properties and autogenous shrinkage of the material.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Geochemistry & Geophysics

Physicochemical and Thermochemical Study of Ettringite

L. P. Ogorodova et al.

Summary: The physicochemical study of ettringite from N'Chwaning, Kalahari, South Africa was conducted using various techniques including X-ray powder diffraction, IR and Raman spectroscopy, thermal analysis, and calorimetry. The thermal transformation and dehydration enthalpies of ettringite were investigated, and the enthalpy of formation was determined using different calorimetric methods. The enthalpy of formation of the Fe-dominant ettringite analogue was also estimated.

GEOCHEMISTRY INTERNATIONAL (2021)

Add to Collection

Article Engineering, Civil

Analysis of durability (frost resistance) of MSWI fly ash modified cement composites

Giedrius Girskas et al.

Summary: The research found that fly ash (FA) affects the rheological characteristics and frost durability of cement pastes, but adding up to 10% of FA does not impair compressive strength. Moreover, utilization of FA in cement composites can improve their durability properties.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Recycling of waste glass in cement mortars: Mechanical properties under high temperature loading

Shuqing Yang et al.

Summary: The study found that recycling waste glass into cement mortar can improve its high temperature compressive strength, but excessive use of glass materials can soften the mortar, requiring careful control of the dosage.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Environmental Sciences

Potential risk of exposure to heavy metals from co-processing of secondary wastes in the Republic of Korea

Min-Yong Lee et al.

Summary: This study analyzed the impact of secondary input materials and fuels on heavy metal concentrations in cement and established a health risk assessment model. The results showed that lead and copper concentrations were higher, and secondary raw materials and additives significantly influenced the observed patterns.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Environmental Sciences

Phase distribution of PCDD/Fs in flue gas from municipal solid waste incinerator with ultra-low emission control in China

Junxiao Wei et al.

Summary: This study investigated the characteristics of PCDD/Fs in the flue gas of a 400 t/d moving grate furnace in Shenzhen, China. Results showed that the three-year-old SCR device tended to remove PCDDs effectively but was ineffective for PCDFs. Continuous chlorination of lower chlorinated PCDD/Fs increased the ratio of PCDFs and PCDDs at the SCR outlet.

CHEMOSPHERE (2021)

Add to Collection

Article Construction & Building Technology

Experimental evaluation of fire resistance performance of cement mortar with PCM/Mg(OH)2-based composite fine aggregate

Dong Ho Yoo et al.

Summary: A fire-resistant mortar for exterior walls was developed using zeolite, a phase change material (PCM), and magnesium hydroxide (MH) to enhance the durability and stability of concrete structures in fire and high-temperature environments. Physical and chemical property tests showed that coated aggregates with higher coverage have a positive effect on the residual compressive strength and fire resistance of the mortar.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Early strength development in concrete using preformed CSH nano crystals

Saikat Das et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

The effect of spent petroleum catalyst powders on the multiple properties in blended cement

Yongqi Da et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Strength and chloride ion distribution brought by aggregate of basalt fiber reinforced coral aggregate concrete

Yan Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Effects of high temperature and post-fire-curing on compressive strength and microstructure of calcium carbonate whisker-fly ash-cement system

Xing Ming et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Municipal Solid Waste Incineration (MSWI) Ashes as Construction Materials-A Review

Byoung Hooi Cho et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Solidification of ettringite after uptaking selenate as a surrogate of radionuclide in glass-ceramics by using industrial by-products

Binglin Guo et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Comparison of different MSWI fly ash treatment processes on the thermal behavior of As, Cr, Pb and Zn in the ash

Wan Chen et al.

WASTE MANAGEMENT (2017)

Add to Collection

Article Construction & Building Technology

Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution

Zhenguo Shi et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Construction & Building Technology

Identification of chromate binding mechanisms in Friedel's salt

Yan Shao et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Crystal structures of Boro-AFm and sBoro-AFt phases

Jean-Baptiste Champenois et al.

CEMENT AND CONCRETE RESEARCH (2012)

Add to Collection

Article Engineering, Environmental

Pollutant Formation and Emissions from Cement Kiln Stack Using a Solid Recovered Fuel from Municipal Solid Waste

Juan A. Conesa et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Engineering, Environmental

Evaluation of ettringite and hydrocalumite formation for heavy metal immobilization: Literature review and experimental study

Maria Chrysochoou et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Article Chemistry, Physical

Hydrocalumite and its polymer derivatives.: 1.: Reversible thermal behavior of Friedel's salt:: A direct observation by means of high-temperature in situ powder X-ray diffraction

L Vieille et al.

CHEMISTRY OF MATERIALS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.