☆ 4.7 Review

Fresh properties and characteristic testing methods for alkali-activated materials: A review

JOURNAL OF BUILDING ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article

Future perspectives for alkali-activated materials: from existing standards to structural applications

Laura Rossi et al.

RILEM Technical Letters (2023)

Add to Collection

Article Construction & Building Technology

New insights into the early-age reaction kinetics of metakaolin geopolymer by 1H low-field NMR and isothermal calorimetry

Guangwei Liang et al.

Summary: In this study, a novel approach using 1H low-field nuclear magnetic resonance (NMR) and isothermal calorimetry was proposed to evaluate the early-age reaction of geopolymer. It was found that activator with low silicate modulus (i.e., high alkalinity) can deepen the reaction degree and increase the gel pore volume of geopolymer.

CEMENT & CONCRETE COMPOSITES (2023)

Add to Collection

Article Construction & Building Technology

Low-field 1H NMR study on geopolymers: The effect of paramagnetic Fe(III)

Ziyou Yu et al.

Summary: The effect of adding Fe(III) ions on spin relaxation and pore structure in metakaolin-based geopolymers was studied using low-field 1H nuclear magnetic resonance (LF NMR). The results showed that Fe(III) affected spin relaxation and pore size, with the former being related to Fe(III) ion content and the latter increasing significantly after reaching 2.0 wt% iron content.

CEMENT AND CONCRETE RESEARCH (2023)

Add to Collection

Article Construction & Building Technology

Estimation of strength, rheological parameters, and impact of raw constituents of alkali-activated mortar using machine learning and SHapely Additive exPlanations (SHAP)

Sohaib Nazar et al.

Summary: This study synthesized one-part alkali-activated mortar (AAM) by partially replacing fly ash with hydraulic lime as a precursor, and optimized the developed AAM using machine learning-based gene expression modeling (GEP). Experimental results showed that specimens with a high quantity of hydraulic lime exhibited greater compressive strength and rheological parameters. The GEP model demonstrated strong generalization and prediction capability for estimating compressive strength, plastic viscosity, and yield strength.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Fresh and mechanical characterization of fly ash/slag by incorporating steel fiber in self-compacted geopolymer concrete br

AbhayV. Nakum et al.

Summary: Industrial waste management and CO2 reduction are critical environmental concerns. Creating sustainable concrete from industrial waste is essential for carbon dioxide elimination. This research investigates the impact of steel fibers and fluid-to-binder ratio on self-compacted geopolymer concrete.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Review Construction & Building Technology

A state-of-the-art review on the setting behaviours of ground granulated blast furnace slag- and metakaolin-based alkali-activated materials

Liming Li et al.

Summary: Alkali-activated materials (AAMs) are potential substitutes for ordinary Portland cement due to their better properties and lower carbon footprint. This review focuses on the setting behaviours of two types of AAMs prepared from ground granulated blast furnace slag (GGBFS) and metakaolin (MK). The study discusses the effects of chemical compositions of precursors, activators, and retarders on the setting times, strengths, and workabilities of AAMs, and provides advice for better application.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Engineering, Civil

Physically explicable mathematical model for strength prediction of UHPFRC

S. H. Chu et al.

Summary: This paper presents a quantitative analysis of the mechanical performance of ultra-high performance fiberreinforced concrete (UHPFRC) and establishes a mathematical model for strength prediction. It also constructs an artificial neural network model. The study provides useful guidelines for the mix design of sustainable and resilient UHPFRC.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Engineering, Civil

Rheological and mechanical optimization of a steel fiber reinforced self-compacting concrete using the design of experiments method

Djamila Gueciouer et al.

Summary: The purpose of this study is to formulate a steel fiber reinforced self-compacting concrete (SFSCC) with optimal rheological and mechanical properties by using marble powder as an addition and partial substitution to cement. DOE was used to analyze the effect of fiber dosage, paste volume, and gravel/sand ratio on SFSCC. The results showed that the flow capacity of SFSCC decreased with increasing fiber dosage, while the increase in paste volume and G/S ratio improved the flow performance. The plastic viscosity was mainly influenced by the volume of the paste. The mechanical results demonstrated that the volume of the paste significantly influenced the flexural strength and compression strength. Increasing the three parameters (%f, V-p, and G/S) led to a significant improvement in flexural strength. The ductility of SFSCC increased with increasing fiber dosage, while the compressive strength was minimally affected.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Set on demand geopolymer using print head mixing for 3D concrete printing

Shravan Muthukrishnan et al.

Summary: This study demonstrates the application of set-on-demand in concrete and validates the feasibility of initial mixing using a print head in geopolymer concrete. The results show that a short duration of online mixing of reactive components can accelerate the strength development of concrete, making it suitable for the print-head mixing process.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Review Construction & Building Technology

Heat evolution of alkali-activated materials: A review on influence factors

Rosnita Mohamed et al.

Summary: This review discusses the use of alkali-activated materials as alternatives to ordinary Portland cement in construction. It highlights the heat evolution during alkali activation and factors influencing heat evolution, emphasizing the importance of understanding heat evolution in the alkali activation process.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Setting Behavior and Phase Evolution on Heat Treatment of Metakaolin-Based Geopolymers Containing Calcium Hydroxide

Byoungkwan Kim et al.

Summary: The setting behavior and phase evolution of geopolymer containing calcium hydroxide were investigated. A low dose of calcium hydroxide can improve the compressive strength of geopolymers, and the reaction products transform into Si-rich nepheline and wollastonite.

MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Alkali activated cement mixture at ambient curing: Strength, workability, and setting time

Biruk Hailu Tekle et al.

Summary: This study investigated the impact of binder content, AS/B ratio, SS/SH ratio, and TW/TB ratio on the strength, setting time, and flowability of ambient cured AAC mixtures using Taguchi method. Results showed that increasing binder content had minimal effect on strength but significantly increased setting time and flowability. An increase in the AS/B ratio led to higher flowability and setting time but reduced strength.

STRUCTURAL CONCRETE (2022)

Add to Collection

Article Energy & Fuels

Influences of CO2-cured cement powders on hydration of cement paste

Yukun Kong et al.

Summary: Carbonated cement pastes (CCP) were investigated as supplementary cementitious materials (SCMs)-like components in ordinary Portland cement (OPC) paste. The results showed that the CO2 sequestration level of CCP increased with the growth of CO2 pressure. However, the use of CCP as a replacement led to higher water demand and inferior workability and compressive strength compared to the control group.

GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Use of hydrated cement pastes (HCP) as a CO2 sponge

Y. K. Kong et al.

Summary: The study investigated the feasibility of using hydrated cement paste (HCP) as a CO2 sponge by carbonating, calcining, and re-carbonating the HCP. Through microstructural analysis, the study examined the capacity of CO2 sequestration and release via HCP, as well as the carbonation phases formed within the cement paste. Initial results showed that HCP could effectively sequester CO2 and release it during the re-carbonation process, with moisture playing a significant role in the efficiency of the process.

JOURNAL OF CO2 UTILIZATION (2022)

Add to Collection

Article Construction & Building Technology

Evaluation of rheology and strength development of alkali-activated slag with different silicates sources

Yubo Sun et al.

Summary: This study provides a detailed investigation on the reproducibility of two groups of alkali-activated slag mixtures, focusing on both fresh properties and strength development. The results show that AAS pastes prepared with different sodium silicate solutions exhibit similar reaction kinetics, fresh properties, and strength development. However, AAS pastes made of silica fume show faster reaction and inferior rheology and strength compared to those prepared with sodium silicate solutions. This study also demonstrates the feasibility of making the same AAS paste using different types of commercial sodium silicate solutions.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Development of drying shrinkage model for alkali-activated slag concrete

Zhihua Ou et al.

Summary: The study aims to develop a drying shrinkage model for alkali-activated slag concrete (AASC). Results showed that the addition of fly ash and silica fume can reduce the drying shrinkage of the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Performance of Fiber-Reinforced Alkali-Activated Mortar with/without Nano Silica and Nano Alumina

Mahmood Hunar Dheyaaldin et al.

Summary: The current study aims to evaluate the effect of nanomaterials on the mechanical and durability performance of fiber-reinforced alkali-activated mortars. The experiments demonstrated that nanomaterials significantly improved the porosity of the matrix.

SUSTAINABILITY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Performance of Alkali-Activated Self-Compacting Concrete with Incorporation of Nanosilica and Metakaolin

Alaa Mohammedameen

Summary: This study analyzes the influence of nano-silica (NS) and metakaolin (MK) on the fresh and hardened performance of alkali-activated self-compacting concretes (A-ASCC). The experimental results show that the addition of NS and MK has a negative impact on the fresh properties of A-ASCC, but can significantly improve the mechanical performance when added in appropriate amounts.

SUSTAINABILITY (2022)

Add to Collection

Article Construction & Building Technology

Capturing the early-age physicochemical transformations of alkali-activated fly ash and slag using ultrasonic pulse velocity technique

Aziz Hasan Mahmood et al.

Summary: This study systematically monitored the reaction heat and ultrasonic pulse velocity (UPV) of alkali-activated low calcium fly ash with different concentrations of alkaline solutions and various dosages of ground granulated blast furnace slag (GGBFS). The results showed that the addition of slag affected the reaction kinetics, physical transformation rate, and morphological features. UPV could capture the effect of slag addition on microstructure densification, which was confirmed by heat evolution measurements and SEM-EDS microstructural observations.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM

Yubo Sun et al.

Summary: This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryo-SEM revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical suspension features, while the silicate-based mixtures had an emulsion phase between slag particles. Increasing water to binder ratio significantly reduced the yield stress and viscosity of AAS pastes.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Engineering, Multidisciplinary

Relaxation characteristics and state evolution of water during the early-age reaction of alkali-activated slag as monitored by low field nuclear magnetic resonance

Ruilin Cao et al.

Summary: This study used LF-NMR to investigate the evolution characteristics of water in sodium hydroxide (SH) and sodium silicate (SS) activated slag pastes. It was found that the SH-activated system had three typical stages, while the SS-activated system had five distinguishable stages. The study also discussed the fundamental reactions and water content changes in different reaction stages of the two types of alkali-activated pastes.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Mechanisms of inorganic salts on Ca(OH)2-activated ground granulated blast-furnace slag curing under different temperatures

Qi Zhai et al.

Summary: This study found that curing temperature and the nature of activators significantly affect the early strength, hydration degree, and microstructure of Ca(OH)(2)-activated GGBFS samples. Activators influence pore solution composition and pH value, with low pH and high Ca2+ activity inhibiting Ca(OH)(2) dissolution and GGBFS reaction. Elevated temperatures mainly accelerate GGBFS hydration at early stages in all samples.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Impedance Spectroscopy as a Methodology to Evaluate the Reactivity of Metakaolin Based Geopolymers

Danilo Bordan Istuque et al.

Summary: This study systematically investigated the mechanism of metakaolin geopolymerization using electrical impedance spectroscopy technique. The results indicated the sensitivity of the impedance technique in identifying and describing the geopolymerization process and its changes. The geopolymerization process in highly alkaline solutions was found to consist of seven stages.

MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Mechanical Properties and Drying Shrinkage of Alkali-Activated Coal Gangue Concrete

Yanbing Zhao et al.

Summary: This paper experimentally studied the feasibility of using composite-activated coal gangue as the primary cementitious material for concrete. The results showed that alkali-activated coal gangue concrete had better mechanical properties compared to ordinary Portland cement concrete, and the mechanical properties improved with the increase in concrete strength grade. Additionally, empirical formulas developed for ordinary Portland cement concrete were found to be applicable to alkali-activated coal gangue concrete as well.

SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Physical

Preparation and Microstructure of Alkali-Activated Rice Husk Ash-Granulated Blast Furnace Slag Tailing Composite Cemented Paste Backfill

Wenhua Zhao et al.

Summary: The study investigates the application of rice hull ash and cement-based materials as cementitious materials. The results show that an appropriate amount of rice hull ash can improve the strength of the material and make the internal structure denser. Rice hull ash has a high specific surface area and a high content of active silica, which is of importance in material research.

MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Early age reaction, rheological properties and pore solution chemistry of NaOH-activated slag mixtures

Xiaodi Dai et al.

Summary: This study investigates the rheology and early reaction process of sodium hydroxide-activated ground granulated blast furnace slag (GGBFS). The results show a strong relationship between the Vicat initial setting time and ultrasonic pulse wave for NaOH activated slag mixtures. The early reaction process of the slag pastes consists of three stages: dissolution, acceleration/condensation, and deceleration. The addition of NaOH increases the yield stress and apparent viscosity of the pastes, and shear-thickening behavior is observed when NaOH concentration reaches 8 M.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Effects of cation in sulfate chloride and nitrite on Ca(OH)2 activated ground granulated blast-furnace slag

Qi Zhai et al.

Summary: This study investigates the effects of different cations on the activation of blast-furnace slag. It is found that the type of sulfate significantly influences the hydration of slag. MgSO4's promotion of slag hydration is limited due to the precipitation of gypsum and brucite, while high concentration of sulfate ions promotes strength development. The pH increase in K2SO4 and Na2SO4 is due to synergistic reactions, while the low pH of MgSO4 inhibits slag dissolution.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Is freeze-drying an alternative to solvent exchange for the hydration stop of cementitious suspensions?

Patrick A. Kissling et al.

Summary: To understand the rheological properties of cementitious suspensions at early stages, it is important to study the formation of ettringite and its time-dependent influence. This study investigates the use of freeze-drying as a method to completely stop the hydration process, and demonstrates its feasibility based on recent research results.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Influence of chloride salt type on chloride ion diffusion performance of alkali-activated slag mortar

Linhua Jiang et al.

Summary: This study evaluates the influence of four cationic chloride salts on the chloride ion diffusion characteristics of alkali-activated slag mortar. The results show that the combination of monovalent cations can promote the chloride ions diffusion, while the combination of monovalent cations and divalent cations has different effects.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Role of silica fume in alkali-activated slag/glass powder paste

Long Li et al.

Summary: The influences of silica fume (SF) on the properties of sodium silicate-based alkali-activated slag/glass powder (AASG) pastes were systematically investigated. The use of SF prolonged the setting time of AASG pastes and different sources of SF had different influences. Incorporating SF increased the yield stress and plastic viscosity of fresh AASG paste at low shear rates, while decreasing plastic viscosity at high shear rates. The compressive strength of AASG paste increased first and then decreased with increasing SF content, with an optimal SF content of about 10%.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Segmentation of backscattered electron images of geopolymers using convolutional autoencoder network

Shohreh Sheiati et al.

Summary: This study evaluates the potential of SegNet, a deep autoencoder convolutional network, for automatic segmentation of fly ash-based geopolymer images. The results show that SegNet achieves comparable accuracy to human performance even with a few training images, and it is able to adapt itself to different magnification levels. Compared to the Gaussian method, SegNet outperforms in uncontrolled imaging conditions and demonstrates self-learning capability in poorly annotated areas.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Rheological Characterization and Accumulation Tests for Strong Thixotropic Engineering Slurry

Kekuo Yuan et al.

Summary: This study aims to propose a strong thixotropic engineering slurry and filling treatment for underground void subsidence hazards, with optimal agent ratios determined through indoor tests. Aeolian sand was found to effectively be used in backfilling treatment for underground voids (mine goaf), showing non-linear increase in static yield stress and unique rheological properties. Proposed rheology models include a natural logarithmic function for yield stress and rest time, an exponential function with two parts for stress-shear rate, and an exponential function for the accumulation law.

MATERIALS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Relationship between rheological property and early age-microstructure building up of alkali-activated slag

Cuifang Lu et al.

Summary: This paper investigates the effects of temperature and activator concentration on the rheological properties of slag activated by a ternary activator. Multiple characterization techniques reveal new insights into the time-dependence features of microstructure build-up in alkali-activated slag (AAS) paste. The time-dependent rheological behavior of AAS is mainly controlled by the formation of a gel network, where free water is trapped. The presence of Al increases the polymerization degree of early gels, leading to stronger interactions between nano gel particles and the rapid development of elasticity and stiffness.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Investigation of using waste marble powder, brick powder, ceramic powder, glass powder, and rice husk ash as eco-friendly aggregate in sustainable red mud-metakaolin based geopolymer composites

Mucteba Uysal et al.

Summary: Geopolymers are an important alternative to cement, allowing the use of waste materials. This study examines the contribution of different waste materials in the geopolymer composite structure. Testing and analysis show that some substitute materials have a successful performance, indicating significant potential in the production of sustainable geopolymers.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Recycling of calcined carbonated cement pastes as cementitious materials: Proposed CCUS technology for calcium looping

Y. K. Kong et al.

Summary: In this study, calcined carbonated hydrated cement pastes (HCPs) were used to partially replace ordinary Portland cement (OPC) as a cementitious material. The initial results showed that the HCP could sequester CO2, forming various calcium carbonates. The 28-day compressive strength of the calcined carbonated HCP-OPC mixtures increased with the replacement ratio up to 20%, owing to the filler effect of wollastonite. By recycling demolition waste, this study proposed a technology roadmap for CCUS and conducted a life cycle assessment to evaluate and compare the environmental impacts.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Segmentation of backscattered electron images of geopolymers using convolutional autoencoder network

Shohreh Sheiati et al.

Summary: This study evaluates the potential of deep autoencoder convolutional network SegNet in automatic segmentation of backscattered electron images, demonstrating its ability to achieve comparable accuracy to human performance, as well as magnification independent training and self-learning capability.

EXPERT SYSTEMS WITH APPLICATIONS (2022)

Add to Collection

Article Construction & Building Technology

Machine learning to predict properties of fresh and hardened alkali-activated concrete

Eslam Gomaa et al.

Summary: This study introduces a random forest model to predict two important properties of fly ash-based AACs, providing high fidelity predictions of new AACs and quantitatively assessing the influence of physiochemical attributes and process parameters on AAC properties, offering a new pathway for optimization of AAC properties.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Predicting shrinkage of alkali-activated blast furnace-fly ash mortars using artificial neural network (ANN)

Elijah Adesanya et al.

Summary: This study presented and discussed the drying shrinkage of alkali-activated blast furnace-fly ash mortars through experimental studies and predictive models. The artificial neural network (ANN) model was found to be more accurate in predicting the drying shrinkage compared to the Multiple Linear Regression (MLR) model.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Continuous Monitoring of the Early-Age Properties of Activated GGBFS with Alkaline Solutions of Different Concentrations

Aziz Hasan Mahmood et al.

Summary: This study found that GGBFS is highly sensitive to the compositions of alkaline solutions, with higher alkalinity leading to better dissolution of species, increased heat evolution, and shorter setting time. The activator concentration also affects the rate of product formations and morphological features, with higher Ms values resulting in homogeneous slag morphology.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture

Yazan Alrefaei et al.

Summary: The study investigates the impact of mixing procedures on the fresh and hardened properties of alkali-activated materials, finding that the mixing procedure significantly affects the performance of AAMs. Hybrid-mixed binders exhibit better performance compared to traditional mixing methods.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Monitoring the setting process of alkali-activated slag-fly ash cements with ultrasonic P-wave velocity

Siva Uppalapati et al.

Summary: This study investigates the effect of sodium carbonate and sodium sulfate on the setting process of sodium silicate-activated slag-fly ash cements. The results show that the partial substitution of activators has no noticeable effect on the initial setting time, but significantly increases the final setting time. The condensation reaction between aluminosilicate units near the particle surface is likely responsible for setting, and a specific ultrasonic velocity range can be used to estimate the setting times of the studied cements.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effect of sodium hydroxide concentration on strength and microstructure of alkali-activated natural pozzolan and limestone powder mortar

Adeshina Adewale Adewumi et al.

Summary: The study found that in AANL mortar, the highest compressive strength was achieved with 10 M NaOH, and 76% of the strength could be achieved within three days when 10 M NaOH was used. XRD characterization revealed that activation with 10 M NaOH led to the formation of anorthite and gehlenite.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Texture, morphology and strength performance of self-compacting alkali-activated concrete: Role of fly ash as GBFS replacement

Ghasan Fahim Huseien et al.

Summary: The study found that adding an appropriate amount of fly ash can improve the workability of self-compacting alkali-activated concrete, but it may also reduce the compressive strength and flexural strength of the concrete. Therefore, adding fly ash in concrete mixtures is a promising approach for promoting sustainable development in the construction industry.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Micro-characterisation of alkali activated paste with fly ash-GGBS-metakaolin binder system with ambient setting characteristics

Muralidhar Kamath et al.

Summary: The study investigates the properties and performance of a ternary binder matrix composed of Fly Ash, Ground Granulated Blast Furnace Slag, and alkali activators. Fresh properties, mechanical properties, and microstructural properties of the ternary binder were studied, showing a homogeneous and denser microstructure with various gels developed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Curing process and pore structure of metakaolin-based geopolymers: Liquid-state 1H NMR investigation

Jing Li et al.

Summary: Geopolymers based on metakaolin with a water-to-solid ratio of 0.59-0.66 were studied during the curing process. Monitoring of the curing process and pore structures was done using NMR relaxometry and cryoporometry, showing changes in relaxation times and pore sizes as the geopolymers matured during curing.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Review Construction & Building Technology

Effect of source materials, additives on the mechanical properties and durability of fly ash and fly ash-slag geopolymer mortar: A review

Shaise K. John et al.

Summary: This study reviews the properties of fly ash and fly ash-slag geopolymer mortar, discussing factors such as alkaline solutions, curing conditions, and additives that impact the performance of geopolymers. Different factors have significant effects on the properties of geopolymers, showing potential application prospects in the construction industry.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Setting Time and Strength Monitoring of Alkali-Activated Cement Mixtures by Ultrasonic Testing

Biruk Hailu Tekle et al.

Summary: In this study, the development of setting time and strength of alkali-activated cement mixes was studied using ultrasonic testing method. The results showed a strong correlation between setting times and strengths with ultrasonic velocity curve, as well as an exponential relation between ultrasonic velocity and compressive and flexural strengths. The Taguchi method of experimental design revealed the significant influence of AS/B ratio on the setting time of AAC mixes.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials

Mehdi Chougan et al.

Summary: Pawel Sikora received funding from the European Union's Horizon 2020 program.

MATERIALS & DESIGN (2021)

Add to Collection

Review Construction & Building Technology

Rheology of alkali-activated materials: A review

Cuifang Lu et al.

Summary: This paper comprehensively reviews the rheological properties of alkali-activated materials (AAMs) and the influence of composition factors on their rheology, providing guidance for future research directions in the field of AAM workability and mechanical requirements.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Mechanics

Development of Infilled Cementitious Composites (ICC)

S. H. Chu

Summary: Infilled cementitious composites (ICC) are a new type of fiber composite material with high sustainability and overall high performance. Research has shown that successful mix design of ICC involves optimization of fiber-particle packing, control of paste volume, and use of ultra-high performance concrete (UHPC) technology. Furthermore, testing has demonstrated the feasibility and superiority of ICC over traditional UHPC in terms of cost reduction, decreased CO2 emissions, and improved performance, positioning ICC as a milestone in the development of fiber reinforced concrete.

COMPOSITE STRUCTURES (2021)

Add to Collection

Review Construction & Building Technology

Fresh and rheological characteristics of fiber reinforced concrete-A review

Wenzhen Wang et al.

Summary: Fiber reinforced concrete (FRC) is widely used for its excellent mechanical performance, but the inclusion of fibers significantly impacts its fresh properties. This paper discusses in detail the workability and rheological properties of FRC, as well as the measurement techniques for fiber orientation and distribution. A literature review reveals the relationship between workability, rheological properties, and mechanical performance of FRC.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Electrochemistry

Early assessment of hydration and microstructure evolution of belite-calcium sulfoaluminate cement pastes by electrical impedance spectroscopy

Lin Chi et al.

Summary: In this study, the relationship among the electrical resistivity, calorimetric heat, and chemical shrinkage of high Belite calcium sulfoaluminate (BCSA) cement is discussed. Microstructure analyses reveal two distinctive hydration stages in BCSA cementitious materials, with the first stage controlled by ye'elimite and gypsum hydration and the second stage by AFm and amorphous phases formation as a secondary hydration process. A specific mathematical equation incorporating electrical resistivity is proposed for BCSA based on classic hydration degree equations for cementitious materials.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Geopolymerization of halloysite via alkali-activation: Dependence of microstructures on precalcination

Baifa Zhang et al.

APPLIED CLAY SCIENCE (2020)

Add to Collection

Article Energy & Fuels

Evolution of Mechanical Properties with Time of Fly-Ash-Based Geopolymer Mortars under the Effect of Granulated Ground Blast Furnace Slag Addition

Mateusz Sitarz et al.

ENERGIES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM

Ruilin Cao et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Multi-technical characterization and correlations between properties of standard cured alkali-activated high-calcium FA binders with GGBS as additive

Weilong Song et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Rheology, shrinkage and pore structure of alkali-activated slag-fly ash mortar incorporating copper slag as fine aggregate

Nanqiao You et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Minimization of the Influence of Shear-Induced Particle Migration in Determining the Rheological Characteristics of Self-Compacting Mortars and Concretes

Christian Baumert et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Alkali-Activated Slag Paste with Different Mixing Water: A Comparison Study of Early-Age Paste Using Electrical Resistivity

Yubin Jun et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Water Retention Mechanism of HPMC in Cement Mortar

Ning Chen et al.

MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

The strength oriented mix design for geopolymer concrete using Taguchi method and Indian concrete mix design code

Shemal Dave et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Studying the effect of alkali dosage on microstructure development of alkali-activated slag pastes by electrical impedance spectroscopy (EIS)

Xiang Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

A review on alkali-activated binders: Materials composition and fresh properties of concrete

Md Manjur A. Elahi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Influence of the alkaline solution and temperature on the rheology and reactivity of alkali-activated fly ash pastes

M. Palacios et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Modifications of basic-oxygen-furnace slag microstructure and their effect on the rheology and the strength of alkali-activated binders

Pavel Leonardo Lopez Gonzalez et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature

Hani Alanazi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Engineering properties of natural pozzolan/slag based alkali-activated concrete

Meysam Najimi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Cleaner one-part geopolymer prepared by introducing fly ash sinking spherical beads: Properties and geopolymerization mechanism

Shenglai Guo et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Review Construction & Building Technology

Fresh and rheological properties of glass fiber reinforced self-compacting concrete with nanosilica and fly ash blended

Erhan Guneyisi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators

Sajjad Yousefi Oderji et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Construction & Building Technology

Effect of retarders on flow and strength development of alkali-activated fly ash/blast furnace slag composite

Kenta Sasaki et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Effect of paste volume on fresh and hardened properties of concrete

S. H. Chu

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Mechanism of sulfate attack on alkali-activated slag: The role of activator composition

Hailong Ye et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Rheology of fly ash-based geopolymer: Effect of NaOH concentration

Yasser Rifaai et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Reaction kinetics of fly ash geopolymerization: Role of particle size controlled by using ball mill

S. K. Nath et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Alkali-activated slag concrete: Fresh and hardened behaviour

F. Puertas et al.

CEMENT & CONCRETE COMPOSITES (2018)

Add to Collection

Article Construction & Building Technology

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Tao Yang et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry

Karen L. Scrivener et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Review Engineering, Multidisciplinary

A review on properties of fresh and hardened geopolymer mortar

Peng Zhang et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete

Mohammed Ibrahim et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Alkali-activated natural pozzolan/slag mortars: A parametric study

Meysam Najimi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature

Guohao Fang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume

Ali Akbar Ramezanianpour et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste

Wonsiri Punurai et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

The Effect of Alkali Concentration and Sodium Silicate Modulus on the Properties of Alkali-Activated Slag Concrete

Hamed Taghvayi et al.

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2018)

Add to Collection

Article Construction & Building Technology

Influence of the rheological properties on the steel fibre distribution and orientation in self-compacting concrete

Elena Jasiuniene et al.

MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Chemistry, Analytical

Visualization of Concrete Slump Flow Using the Kinect Sensor

Jung-Hoon Kim et al.

SENSORS (2018)

Add to Collection

Article Construction & Building Technology

Effect of limestone on rheological, shrinkage and mechanical properties of alkali - Activated slag/fly ash grouting materials

Jichun Xiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Setting, Strength, and Autogenous Shrinkage of Alkali-Activated Fly Ash and Slag Pastes: Effect of Slag Content

Marija Nedeljkovic et al.

MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Dosage of Alkaline Activator on the Properties of Alkali-Activated Slag Pastes

Zhenzhen Jiao et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Assessing the performance of molarity and alkaline activator ratio on engineering properties of self-compacting alkaline activated concrete at ambient temperature

V. K. Nagaraj et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Thermal and concentration aspects in Carreau viscosity model via wedge

Usman Ali et al.

CASE STUDIES IN THERMAL ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Drying shrinkage of alkali-activated fly ash/slag blended system

Guisheng Wang et al.

JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS (2018)

Add to Collection

Article Thermodynamics

Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry

S. K. Nath et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Construction & Building Technology

Small amplitude oscillatory shear technique to evaluate structural build-up of cement paste

Qiang Yuan et al.

MATERIALS AND STRUCTURES (2017)

Add to Collection

Review Construction & Building Technology

Durability of alkali-activated materials in aggressive environments: A review on recent studies

Jian Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Influence of fly ash on the pore structure and shrinkage characteristics of metakaolin-based geopolymer pastes and mortars

Tao Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Effect of constituents on rheological properties of fresh concrete-A review

Dengwu Jiao et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Construction & Building Technology

Shrinkage and strength development of alkali-activated fly ash-slag binary cements

Maryam Hojati et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Alkali-activated mortars: Workability and rheological behaviour

M. M. Alonso et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Influence of rheological properties of cement mortar on steel fiber distribution in UHPC

Rui Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Effect of alkali-activated metakaolin cement on compressive strength of mortars

Kornnika Wianglor et al.

APPLIED CLAY SCIENCE (2017)

Add to Collection

Article Construction & Building Technology

Effects of micro and nanoparticles of SiO2 on the permeability of alkali activated slag concrete

K. Behfarnia et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Understanding the drying shrinkage performance of alkali-activated slag mortars

Hailong Ye et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Construction & Building Technology

Shrinkage mechanisms of alkali-activated slag

Hailong Ye et al.

CEMENT AND CONCRETE RESEARCH (2016)

Add to Collection

Article Materials Science, Ceramics

Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete

F. N. Okoye et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Construction & Building Technology

The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers

Mohsen Jafari Nadoushan et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Assessing the porosity and shrinkage of alkali activated slag-fly ash composites designed applying a packing model

X. Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Intrinsic parameters involved in the synthesis of metakaolin based geopolymer: Microstructure analysis

Mahdi Meftah et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber

Saeid Hesami et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Proceedings Paper Engineering, Industrial

Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars

Ahmad B. Malkawi et al.

PROCEEDING OF 4TH INTERNATIONAL CONFERENCE ON PROCESS ENGINEERING AND ADVANCED MATERIALS (ICPEAM 2016) (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Geopolymer concrete for structural use: Recent findings and limitations

M. F. Nuruddin et al.

INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2016 (2016)

Add to Collection

Article Construction & Building Technology

Properties of alkali activated slag-fly ash blends with limestone addition

X. Gao et al.

CEMENT & CONCRETE COMPOSITES (2015)

Add to Collection

Article Construction & Building Technology

Lowering paste volume of SCC through aggregate proportioning to reduce carbon footprint

A. K. H. Kwan et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Rheological and mechanical properties of fiber-reinforced alkali-activated composite

Se-Jin Choi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends

X. Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Characterization of alkali activated slag-fly ash blends containing nano-silica

X. Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

The fresh and engineering properties of alkali activated slag as a function of fly ash replacement and alkali concentration

Wei-Chien Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Engineering, Chemical

A 3-parameter packing density model for angular rock aggregate particles

A. K. H. Kwan et al.

POWDER TECHNOLOGY (2015)

Add to Collection

Proceedings Paper Construction & Building Technology

Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature

Partha Sarathi Deb et al.

CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE (2015)

Add to Collection

Article Construction & Building Technology

Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems

Elisabeth Deir et al.

CEMENT & CONCRETE COMPOSITES (2014)

Add to Collection

Article Construction & Building Technology

Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution

F. Puertas et al.

CEMENT & CONCRETE COMPOSITES (2014)

Add to Collection

Article Engineering, Multidisciplinary

Effect of activator type and content on properties of alkali-activated slag mortars

Serdar Aydin et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers

J. G. Jang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition

Pradip Nath et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

The engineering properties of alkali-activated slag pastes exposed to high temperatures

Wei-Chien Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer

Behzad Nematollahi et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Engineering, Multidisciplinary

Effect of fine to coarse aggregate ratio on the rheology and fracture energy of steel fibre reinforced self-compacting concretes

Mert Yucel Yardimci et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2014)

Add to Collection

Article Chemistry, Physical

Flow properties of MK-based geopolymer pastes. A comparative study with standard Portland cement pastes

Aurelie Favier et al.

SOFT MATTER (2014)

Add to Collection

Article Construction & Building Technology

1H NMR relaxometry as an indicator of setting and water depletion during cement hydration

Biyun Wang et al.

CEMENT AND CONCRETE RESEARCH (2013)

Add to Collection

Review Construction & Building Technology

Variation in hybrid cements over time. Alkaline activation of fly ash-portland cement blends

I. Garcia-Lodeiro et al.

CEMENT AND CONCRETE RESEARCH (2013)

Add to Collection

Article Engineering, Multidisciplinary

The effect of fiber properties on high performance alkali-activated slag/silica fume mortars

Serdar Aydin et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

A ternary optimisation of mineral additives of alkali activated cement mortars

Serdar Aydin

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide

M. R. Karim et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Review Engineering, Environmental

Activated sludge rheology: A critical review on data collection and modelling

N. Ratkovich et al.

WATER RESEARCH (2013)

Add to Collection

Article

Effects of Dosage and Modulus Ratio of Alkali-Activated Solution on the Properties of Slag Mortars

Maochieh Chi et al.

(2012)

Add to Collection

Article Construction & Building Technology

Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH

Deepak Ravikumar et al.

CEMENT & CONCRETE COMPOSITES (2012)

Add to Collection

Review Construction & Building Technology

Supplementary Cementitious Materials

Ruben Snellings et al.

APPLIED MINERALOLGY OF CEMENT & CONCRETE (2012)

Add to Collection

Article Thermodynamics

Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide

Zuhua Zhang et al.

THERMOCHIMICA ACTA (2012)

Add to Collection

Review Construction & Building Technology

Properties of fresh and hardened concrete

Konstantin Kovler et al.

CEMENT AND CONCRETE RESEARCH (2011)

Add to Collection

Review Construction & Building Technology

Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O-CaO-Al2O3-SiO2-H2O

I. Garcia-Lodeiro et al.

CEMENT AND CONCRETE RESEARCH (2011)

Add to Collection

Article Construction & Building Technology

Composition, strength and workability of alkali-activated metakaolin based mortars

F. Pacheco-Torgal et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Factors affecting the shrinkage of fly ash geopolymers

Charoenchai Ridtirud et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2011)

Add to Collection

Article Construction & Building Technology

Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans

A. R. Pourkhorshidi et al.

CEMENT & CONCRETE COMPOSITES (2010)

Add to Collection

Review Thermodynamics

A review on the utilization of fly ash

M. Ahmaruzzaman

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

Add to Collection

Review Chemistry, Physical

Thixotropy

Jan Mewis et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2009)

Add to Collection

Article Construction & Building Technology

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

Cengiz Duran Atis et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Construction & Building Technology

Workability Loss and Compressive Strength Development of Cementless Mortars Activated by Combination of Sodium Silicate and Sodium Hydroxide

Keun-Hyeok Yang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)

Add to Collection

Article Construction & Building Technology

Influence of fine aggregate characteristics on the rheological properties of mortars

Mikael Westerholm et al.

CEMENT & CONCRETE COMPOSITES (2008)

Add to Collection

Article Mechanics

Minimizing end-effects in the coaxial cylinders viscometer: Viscoplastic flow inside the ConTec BML Viscometer 3

Jon Elvar Wallevik

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2008)

Add to Collection

Article Chemistry, Applied

Alkaline activation of metakaolin-fly ash mixtures:: Obtain of Zeoceramics and Zeocements

A. Fernandez-Jimenez et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2008)

Add to Collection

Article Construction & Building Technology

Packing density of cementitious materials : part 2 - packing and flow of OPC plus PFA plus CSF

A. K. H. Kwan et al.

MATERIALS AND STRUCTURES (2008)

Add to Collection

Article Materials Science, Multidisciplinary

In situ observing the hydration process of K-PSS geopolymeric cement with environment scanning electron microscopy

Zhang Yunsheng et al.

MATERIALS LETTERS (2007)

Add to Collection

Article Construction & Building Technology

Workability and strength of coarse high calcium fly ash geopolymer

P. Chindaprasirt et al.

CEMENT & CONCRETE COMPOSITES (2007)

Add to Collection

Article Construction & Building Technology

Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes

G. Ye et al.

CEMENT & CONCRETE COMPOSITES (2007)

Add to Collection

Article Construction & Building Technology

Effects of size and uncompacted voids of aggregate on mortar flow ability

Jiong Hu et al.

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2007)

Add to Collection

Article Construction & Building Technology

A thixotropy model for fresh fluid concretes: Theory, validation and applications

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2006)

Add to Collection

Article Materials Science, Ceramics

Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria

W Lai et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)

Add to Collection

Article Construction & Building Technology

Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour

N De Belie et al.

CEMENT AND CONCRETE RESEARCH (2005)

Add to Collection

Article Physics, Fluids & Plasmas

Lattice Boltzmann method for non-Newtonian (power-law) fluids

S Gabbanelli et al.

PHYSICAL REVIEW E (2005)

Add to Collection

Article Engineering, Industrial

Viscosity models in simulation of the filling stage of the injection molding process

J Koszkul et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

Add to Collection

Article Construction & Building Technology

Analysis of geometric characteristics of GGBS particles and their influences on cement properties

HW Wan et al.

CEMENT AND CONCRETE RESEARCH (2004)

Add to Collection

Article Construction & Building Technology

In situ monitoring of the hydration process of K-PS geopolymer cement with ESEM

S Wei et al.

CEMENT AND CONCRETE RESEARCH (2004)

Add to Collection

Article Construction & Building Technology

Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction

M Nehdi et al.

CEMENT AND CONCRETE RESEARCH (2004)

Add to Collection

Article Construction & Building Technology

Analysis of cement pastes and mortars by a combination of backscatter-based SEM image analysis and calculations based on the Powers model

S Igarashi et al.

CEMENT & CONCRETE COMPOSITES (2004)

Add to Collection

Article Construction & Building Technology

Electrical conductivity of granulated slag cement kiln dust-silica fume pastes at different porosities

TM Salem et al.

CEMENT AND CONCRETE RESEARCH (2001)

Add to Collection

Article Construction & Building Technology

Superplasticizer effects on setting and structuration mechanisms of ultrahigh-performance concrete

V Morin et al.

CEMENT AND CONCRETE RESEARCH (2001)

Add to Collection

Article Construction & Building Technology

Ultrasonic monitoring of setting and hardening of cement mortar - A new device

HW Reinhardt et al.

MATERIALS AND STRUCTURES (2000)

Add to Collection

Article Materials Science, Multidisciplinary

Hydration of alkali-activated ground granulated blast furnace slag

S Song et al.

JOURNAL OF MATERIALS SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.