4.7 Article

Microstructural characteristics of bonding interfacial transition zone of concrete and magnesium ammonium phosphate cement

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Effect of roughness on bonding performance between Portland cement concrete and magnesium phosphate cement concrete

Suhui Zhang et al.

Summary: This paper investigated the bonding performance between magnesium phosphate cement concrete (MPC) and ordinary portland cement concrete (OPC) with different roughness. The results showed a positive correlation between roughness and bonding performance, with the bonding interface categorized into two forms: MPC paste bonding to OPC paste, and MPC paste bonding to the aggregate.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Analytical model for the bonding performance between HSSWM-ECC and concrete

Kai Zhang et al.

Summary: In this study, the bonding performance between HSSWM-ECC and concrete was investigated through modified hinged beam tests. A bond-slip model and a micro-segment analysis method were proposed to accurately describe the mechanical characteristics of the interface.

CEMENT & CONCRETE COMPOSITES (2022)

Article Mathematics, Interdisciplinary Applications

Fractal Analysis on Pore Structure and Modeling of Hydration of Magnesium Phosphate Cement Paste

Yuxiang Peng et al.

Summary: This study investigates the hydration reaction of magnesium phosphate cement (MPC) paste by thermodynamic simulation and explores the influence of the magnesium-phosphorus molar ratio and water-to-binder ratio on hydration products and porosity. The results show that a small M/P ratio is beneficial for main hydration product formation, and reducing M/P and W/B ratios helps reduce porosity.

FRACTAL AND FRACTIONAL (2022)

Article Construction & Building Technology

Air entraining admixtures: Mechanisms, evaluations, and interactions

Lori E. Tunstall et al.

Summary: Air entraining admixtures (AEAs) are surfactant-based solutions and powders that stabilize air voids in cement paste to protect concrete against frost damage. In addition to stabilizing air voids, AEAs also affect other properties of wet and hardened concrete.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Bond performance of repair mortar made with magnesium phosphate cement and ferroaluminate cement

Liang Jia et al.

Summary: This study focuses on investigating the bond performance of mortar with magnesium phosphate cement as a novel-type repair material, and finds that incorporating ferroaluminate cement can significantly enhance the mechanical properties and water resistance of the composite cement. The rough substrate interface contributes to the improvement of flexural bond strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

The properties and mesco/microstructure characteristics of interfacial zone between precast concrete and self-compacting concrete

Wenxu Li et al.

Summary: The plastic viscosity of SCC mixture plays a crucial role in the bonding effect and mechanical properties between self-compacting concrete and steam-cured concrete, with higher viscosity enhancing the bonding performance between the two materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Mathematics, Interdisciplinary Applications

Fractal Analysis on Pore Structure and Hydration of Magnesium Oxysulfate Cements by First Principle, Thermodynamic and Microstructure-Based Methods

Jiasheng Huang et al.

Summary: A novel multiscale modeling strategy is proposed to simulate the hydration and pore structure of magnesium oxysulfate (MOS) cement system. The study found that large M and large H had different impacts on the formation of specific phases and the decomposition of the cement paste. Visualization of the hydration status and fractal analysis revealed the changes in pore structure after hydration.

FRACTAL AND FRACTIONAL (2021)

Article Construction & Building Technology

Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cycles

Shenghao Zuo et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Multidisciplinary

Microstructure evolution of interface between magnesium ammonium phosphate cement and Portland cement under sulphate corrosion environment

Jun Li et al.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2020)

Article Mechanics

Meso-scale mechanical properties of mudstone investigated by nanoindentation

Changlun Sun et al.

ENGINEERING FRACTURE MECHANICS (2020)

Article Construction & Building Technology

Research and application of random aggregate model in determining the fracture behavior of four-point bending beam with notch

Cao Peng et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Mechanics

Four-point bending tests for the fracture properties of concrete

Yangyang Yin et al.

ENGINEERING FRACTURE MECHANICS (2019)

Article Construction & Building Technology

Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes

Meng Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Materials Science, Multidisciplinary

Statistical Characteristics of Microhardness of Hardened Cement Paste

Dang Yudong et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2018)

Article Construction & Building Technology

Micro-structural behavior of interfacial transition zone of the porous sintered fly ash aggregate

Manu S. Nadesan et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Article Construction & Building Technology

On the influence of Mg/P ratio on the properties and durability of magnesium potassium phosphate cement pastes

Mathieu Le Rouzic et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

A study of the bonding performance of magnesium phosphate cement on mortar and concrete

Yue Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Investigation of magnesium phosphate cement hydration in diluted suspension and its retardation by boric acid

Hugo Lahalle et al.

CEMENT AND CONCRETE RESEARCH (2016)

Review Construction & Building Technology

MgO expansive cement and concrete in China: Past, present and future

Liwu Mo et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Construction & Building Technology

Improvement of the biaxial flexure test method for concrete

Jihwan Kim et al.

CEMENT & CONCRETE COMPOSITES (2013)

Article Construction & Building Technology

Property evaluation of magnesium phosphate cement mortar as patch repair material

Fei Qiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Construction & Building Technology

Influence of silica fume on the interfacial bond between aggregate and matrix in near-surface layer of concrete

D. X. Xuan et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Article Construction & Building Technology

Concrete-to-concrete bond strength.: Influence of the roughness of the substrate surface

ENBS Júlio et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)