4.6 Article

Study on the Performance of Ni-MoS2 Catalysts with Different MoS2 Structures for Dibenzothiophene Hydrodesulfurization

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Activation of the MoS2 Basal Plane to Enhance CO Hydrogenation to Methane Activity Through Increasing S Vacancies

Qiang Wang et al.

Summary: The basal plane of MoS2 was activated to enhance its hydrogenation activity. The prepared MoS2 catalysts showed a curved shape, and the catalysts pyrolyzed under a N-2 atmosphere had a larger number of S-vacancies. The increase in S-vacancies decreased the Mo-S bond energy and enhanced the catalytic activity.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Enhanced activation of peroxymonosulfate by ball-milled MoS2 for degradation of tetracycline: Boosting molybdenum activity by sulfur vacancies

Xuguang Li et al.

Summary: Ball milling of MoS2 optimizes its surface properties, increasing surface area and S-vacancies to expose more Mo (IV) sites, resulting in enhanced catalytic efficiency for PMS activation. The process also improves adsorption capacity and accelerates the generation of reactive species, leading to more efficient degradation of contaminants like TC in advanced oxidation processes.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Applied

The evolution of NiMo unsupported catalysts with 3DOM structure for thiophene hydrodesulfurization

Dezhi Han et al.

Summary: The microstructure changes of unsupported hydrodesulfurization catalysts were investigated in this study. The 3DOM NiMo unsupported catalysts were successfully fabricated using a PMMA colloidal crystal template and citric acid. The characterization results showed that these catalysts had a well-defined 3DOM structure, providing abundant active sites and high specific surface area, leading to improved catalytic performance. The 3DOM NiMo-1 catalyst exhibited excellent performance in thiophene conversion.

CATALYSIS TODAY (2022)

Article Engineering, Electrical & Electronic

One-step construction of cubic-like NiS2@MoS2 nanocrystals for improved electrocatalytic performance

Yuxi Lei et al.

Summary: This study developed a facile one-step hydrothermal process for the fabrication of cubic-like NiS2@MoS2 nanostructures and investigated their performance as water splitting electrocatalysts. Results showed that the synthesized nanocomposites possessed rich active sites and improved electronic conductivity, exhibiting enhanced electrocatalytic activity. This provides a simple method for the design and construction of efficient sulfide-based electrocatalysts.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Nanoscience & Nanotechnology

Boosting Highly Active Exposed Mo Atoms by Fine-Tuning S-Vacancies of MoS2-Based Materials for Efficient Hydrogen Evolution

Tian Lian et al.

Summary: Guided by theoretical calculations, this study presents a novel composite strategy to finely tune the concentration of S-vacancies in MoS2-based materials, achieving efficient hydrogen evolution reaction (HER). By modulating S-vacancies into the basal planes of MoS2 and controlling the CS-vacancies, the balance between intrinsic activity and quantity of EMAs is achieved, boosting the catalytic performance of the synthesized electrocatalysts.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Chemical

Selective dissolution of copper and iron from molybdenite concentrate using acidic sodium nitrate solution

Narangarav Tumen-Ulzii et al.

Summary: This study investigates the selective dissolution of copper and iron from molybdenite concentrate to improve its quality. The results show that under optimized conditions, the extraction of Cu and Fe can achieve 81.4% and 74.1% respectively, with a minor loss of molybdenum.

MINERALS ENGINEERING (2022)

Review Chemistry, Applied

Recent advances in the unsupported catalysts for the hydrodesulfurization of fuel

Enlai Wang et al.

Summary: This review provides an overview of the research progress in unsupported catalysts for the hydrodesulfurization (HDS) of fuel, including template-free methods, template methods, and future development prospects.

FUEL PROCESSING TECHNOLOGY (2022)

Article Chemistry, Physical

Template-free, facile synthesis of nickel promoted multi-walled MoS2 & nano-bricks containing hierarchical MoS2 nanotubes from the bulk NiMo oxide

Ramesh Kumar Chowdari et al.

Summary: The low-temperature and template-free synthesis method was developed to prepare MoS2 nanotubes by sulfidation of bulk NiMo oxide. The in-situ sulfided catalyst showed outstanding activity in the hydrodesulfurization of dibenzothiophene (DBT), significantly increasing the initial reaction rate. Mathematical expression (RKC equation) was derived to correlate the size of the regular hexagonal MoS2 nanoparticles with its activity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

Fine-tuning interlayer spacing in MoS2 for enriching 1T phase via alkylated ammonium ions for electrocatalytic hydrogen evolution reaction

Selvaraj Venkateshwaran et al.

Summary: A simple hydrothermal approach was employed to prepare MoS2 enriched with the 1T phase using alkylated ammonium ions, with methyl ammonium ion found to be the most suitable for phase enrichment. The resultant MoS2 showed excellent hydrogen evolution reaction activity and robust durability.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Nanoscience & Nanotechnology

One-Pot Hydrothermal Synthesis of Solution-Processable MoS2/PEDOT:PSS Composites for High-Performance Supercapacitors

Yunfeng Chao et al.

Summary: The study introduces a polymer into the precursor to inhibit the self-assembly of MoS2 nanosheets, forming a MoS2/PEDOT:PSS hydrogel in the hydrothermal process, which can be used to prepare free-standing flexible films or for 3D printing. The resulting MP film displays excellent electrochemical performance and high capacitance retention rates after bending cycles in various electrolytes.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Hierarchical Co and Nb dual-doped MoS2 nanosheets shelled micro-TiO2 hollow spheres as effective multifunctional electrocatalysts for HER, OER, and ORR

Dinh Chuong Nguyen et al.

Summary: The Co and Nb dual-doping strategy modifies the electronic structure of MoS2, enhancing the efficiency of the Co,Nb-MoS2/TiO2 HSs catalyst for hydrogen evolution, oxygen evolution reaction, and oxygen reduction reaction. The unique hollow spherical structure and synergistic effects between TiO2 core and MoS2 shell provide effective channels for electron transfer and facilitate ion diffusion.

NANO ENERGY (2021)

Article Chemistry, Physical

Sulfur vacancy-rich MoS2 as a catalyst for the hydrogenation of CO2 to methanol

Jingting Hu et al.

Summary: Sulfur vacancies on MoS2 nanosheets facilitate the selective hydrogenation of CO2 to methanol by inhibiting methane formation, making it an efficient low-temperature catalyst.

NATURE CATALYSIS (2021)

Article Chemistry, Multidisciplinary

Molecular Engineering on MoS2 Enables Large Interlayers and Unlocked Basal Planes for High-Performance Aqueous Zn-Ion Storage

Shengwei Li et al.

Summary: The study introduces a molecular engineering strategy for MoS2 cathodes, involving the manufacturing of structure defects and O-doping to unlock the inactive basal plane and increase the interlayer spacing, leading to the production of abundant 1T-phase for enhanced Zn2+ transport. The tailored D-MoS2-O material exhibits excellent hydrophilicity and high conductivity, allowing for high-rate capability and stable performance in a wearable rechargeable Zn battery, showcasing great application potential for aqueous Zn-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Design of an intercalated Nano-MoS2 hydrophobic catalyst with high rim sites to improve the hydrogenation selectivity in hydrodesulfurization reaction

Kun Sun et al.

Summary: By intercalating amine groups into nano-MoS2, the hydrophobic catalyst exhibited higher activity and selectivity in hydrodesulfurization reactions. The intercalated hydrophobic nano-MoS2 catalyst has increased number of active sites and shows good stability in catalytic cycles.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Acoustics

Ultrasonication-assisted synthesis of 2D porous MoS2/GO nanocomposite catalysts as high-performance hydrodesulfurization catalysts of vacuum gasoil: Experimental and DFT study

Zohal Safaei Mahmoudabadi et al.

Summary: A novel method using ultrasonication was developed to synthesize highly porous MoS2/graphene oxide (M-GO) nanocomposites, leading to increased specific surface area and improved HDS activity. Various characterization techniques were utilized to study the physicochemical properties and catalytic performance of the nanocatalysts, with high surface area M9-GO nanocatalyst showing the best catalytic performance compared to traditional catalyst Co-Mo/gamma Al2O3. Additionally, density functional theory calculations revealed that the GO substrate can stabilize MoS2 layers, promoting the direct desulfurization reaction in the hydrodesulfurization process.

ULTRASONICS SONOCHEMISTRY (2021)

Article Chemistry, Applied

Layer-structure adjustable MoS2 catalysts for the slurry-phase hydrogenation of polycyclic aromatic hydrocarbons

Donge Wang et al.

Summary: In this study, MoS2 catalysts were synthesized using different methods, revealing that ball-milling method stabilized MoS2 catalysts with 6-8 layers and 30 nm lateral size, while the hydrothermal method produced MoS2 catalysts with smaller lateral sizes and fewer stacking layers. The catalytic activities of MoS2 catalysts were found to be closely related to their layer structures, with the catalyst showing the highest catalytic activity characterized by 100% rim sites and a lateral size of 5-10 nm.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

A study on the role of Ni atoms in the HDN activity of NiMoS2/Al2O3 catalyst

Wei Han et al.

APPLIED CATALYSIS A-GENERAL (2020)

Article Chemistry, Multidisciplinary

Solvothermal Synthesis of Defect-Rich Mixed 1T-2H MoS2 Nanoflowers for Enhanced Hydrodesulfurization

Hongwei Cao et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Multidisciplinary Sciences

Enhancing hydrogenation activity of Ni-Mo sulfide hydrodesulfurization catalysts

Manuel F. Wagenhofer et al.

SCIENCE ADVANCES (2020)

Article Chemistry, Physical

Effects of Ni-Al2O3 interaction on NiMo/Al2O3 hydrodesulfurization catalysts

Zhiwei Liu et al.

JOURNAL OF CATALYSIS (2020)

Article Materials Science, Multidisciplinary

Alternative synthesis of structurally defective MoS2 nanoflakes for efficient hydrogen evolution reaction

K. Nguyen-Ba et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Chemistry, Multidisciplinary

Efficient NO2 sensing performance of a low-cost nanostructured sensor derived from molybdenite concentrate

Mirabbos Hojamberdiev et al.

GREEN CHEMISTRY (2020)

Article Chemistry, Physical

Hydrodesulfurization activity of Ni-containing unsupported Ga(x)WS2 catalysts

T. A. Zepeda et al.

CATALYSIS COMMUNICATIONS (2019)

Article Chemistry, Applied

3D skeleton nanostructured Ni3S2/Ni foam@RGO composite anode for high-performance dual-ion battery

Shuai Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Hydrothermal-assisted shearing exfoliation for few-layered MoS2 nanosheets

Pei-Rong Wu et al.

RSC ADVANCES (2019)

Article Chemistry, Physical

Preparation of hydrodesulfurization catalysts using MoS3 nanoparticles as a precursor

Yang Gao et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Article Chemistry, Multidisciplinary

Engineering Ni-Mo-S Nanoparticles for Hydrodesulfurization

Anders Bodin et al.

NANO LETTERS (2018)

Article Engineering, Mechanical

Enhancing of the tribological characteristics of the lubricant oils using Ni-promoted MoS2 nanosheets as nano-additives

Naveenkumar Rajendhran et al.

TRIBOLOGY INTERNATIONAL (2018)

Article Chemistry, Applied

PVP-assisted synthesis of unsupported NiMo catalysts with enhanced hydrodesulfurization activity

Huan Liu et al.

FUEL PROCESSING TECHNOLOGY (2017)

Article Chemistry, Multidisciplinary

Boosting Hydrogen Evolution Performance of MoS2 by Band Structure Engineering

Jing Li et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Materials Science, Multidisciplinary

Defective MoS2 electrocatalyst for highly efficient hydrogen evolution through a simple ball-milling method

Li-Fang Zhang et al.

SCIENCE CHINA-MATERIALS (2017)

Article Chemistry, Applied

Effect of NiMo phases on the hydrodesulfurization activities of dibenzothiophene

Huan Liu et al.

CATALYSIS TODAY (2017)

Article Chemistry, Physical

Efficient Ni-Mo hydrodesulfurization catalyst prepared through Keggin polyoxometalate

Ali Alsalme et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Article Materials Science, Multidisciplinary

MoS2 with tunable surface structure directed by thiophene adsorption toward HDS and HER

Sijia Liu et al.

SCIENCE CHINA-MATERIALS (2016)

Article Chemistry, Multidisciplinary

Functionalization of Liquid-Exfoliated Two-Dimensional 2H-MoS2

Claudia Backes et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Multidisciplinary

Exothermic effects and related surface properties of the ex situ presulfurized catalysts in fabrication and activation

Yulan Gao et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Article Chemistry, Applied

Preparation, characterization and hydrodesulfurization performances of Co-Ni2P/SBA-5 catalysts

Zhou-jun Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2015)

Article Materials Science, Multidisciplinary

Synthesis of bilayer MoS2 nanosheets by a facile hydrothermal method and their methyl orange adsorption capacity

Lijuan Ye et al.

MATERIALS RESEARCH BULLETIN (2014)

Article Chemistry, Applied

Morphology and Atomic-Scale Structure of MoS2 Nanoclusters Synthesized with Different Sulfiding Agents

Henrik G. Fuchtbauer et al.

TOPICS IN CATALYSIS (2014)

Review Chemistry, Physical

Economic and technical impacts of replacing Co and Ni promotion in hydrotreating catalysts

S. Eijsbouts et al.

APPLIED CATALYSIS A-GENERAL (2013)

Proceedings Paper Engineering, Industrial

Synthesis and Characterization of SIC Nanoparticles with Lamellar Structures from Taixi Coal

Kangli He et al.

CURRENT TRENDS IN THE DEVELOPMENT OF INDUSTRY, PTS 1 AND 2 (2013)

Article Chemistry, Physical

Deoxygenation mechanisms on Ni-promoted MoS2 bulk catalysts: A combined experimental and theoretical study

M. Ruinart de Brimont et al.

JOURNAL OF CATALYSIS (2012)

Article Chemistry, Physical

Morphological effect of MoS2 nanoparticles on catalytic oxidation and vacuum lubrication

Kun Hong Hu et al.

APPLIED SURFACE SCIENCE (2010)

Review Chemistry, Physical

Synthetic Fabrication of Nanoscale MoS2-Based Transition Metal Sulfides

Shutao Wang et al.

MATERIALS (2010)

Article Materials Science, Multidisciplinary

Basic nickel carbonate: Part II. Microstructure evolution during industrial nickel production from basic nickel carbonate

M. A. Rhamdhani et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2008)

Article Materials Science, Multidisciplinary

Basic nickel carbonate: Part I. Microstructure and phase changes during oxidation and reduction processes

M. A. Rhamdhani et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2008)

Article Chemistry, Physical

Location and coordination of promoter atoms in Co- and Ni-promoted MoS2-based hydrotreating catalysts

Jeppe V. Lauritsen et al.

JOURNAL OF CATALYSIS (2007)

Article Chemistry, Physical

Spillover hydrogen mobility during Co-Mo catalyzed HEIS in industrial-like conditions

P. Baeza et al.

APPLIED CATALYSIS A-GENERAL (2006)

Article Chemistry, Physical

Alumina-titania binary mixed oxide used as support of catalysts for hydrotreating of Maya heavy crude

SK Maity et al.

APPLIED CATALYSIS A-GENERAL (2003)