Related references
Note: Only part of the references are listed.
Article
Automation & Control Systems
Zhongbao Wei et al.
Summary: This article proposes a thermal-model-based method for multistate joint observation in lithium-ion battery management. By embedding distributed temperature sensors, a novel smart battery design enables real-time monitoring of internal and surface temperatures, as well as state parameters with high space resolution.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2023)
Article
Thermodynamics
Zhongbo Zhang et al.
Summary: A novel lithium-ion battery with an inner cooling/heating structure is proposed in this paper to improve heat dissipation and low-temperature performance. Experimental results show that the inner cooling/heating structure can significantly enhance the battery's heat transfer characteristics and low-temperature performance.
APPLIED THERMAL ENGINEERING
(2023)
Review
Thermodynamics
Xinghui Zhang et al.
Summary: Electric vehicles powered by lithium-ion batteries have great potential in alleviating energy and environmental issues, but temperature management is crucial for their development and propagation. Both high and low temperature environments can negatively impact battery performance and safety, requiring proper handling.
Article
Thermodynamics
Siqi Chen et al.
Summary: This study proposes a design of a double-direction liquid heating-based battery module combined with the chassis for electric vehicles in an extremely low-temperature environment. Numerical calculations show that the proposed system is more efficient than commonly used battery thermal management systems, and an optimal design is obtained through multi-objective optimization. The study also guides the integration of efficient thermal management systems with vehicle chassis to improve thermal management efficiency and energy density under various climate conditions.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2022)
Article
Engineering, Industrial
Yujie Wang et al.
Summary: This paper discusses the application of digital twin technology in the field of battery management, presents a networked architecture of cloud-side-end collaboration, and establishes a digital twin model of the battery for refined and safety management.
JOURNAL OF MANUFACTURING SYSTEMS
(2022)
Article
Energy & Fuels
Hao Tang et al.
Summary: This paper proposes an innovative digital twin-driven battery system framework and a joint HIF-PF online algorithm for accurate estimation of battery State of Charge (SoC). The experimental results demonstrate the superiority of the algorithm, which has been successfully applied in battery systems with functions such as real-time voltage and current monitoring and visualization.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Energy & Fuels
Yifei Yu et al.
Summary: This paper presents a study on the real-time monitoring of the thermal characteristics of a lithium-ion battery. The results show the complex and varied temperature distribution within the battery, with peak temperatures reaching as high as 9.7℃. The study provides insights into battery thermal management and system safety improvement, which are relevant to various applications of lithium-ion batteries, such as automotive and aerospace.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Energy & Fuels
Liang Zhang et al.
Summary: This paper develops a charging safety early warning model for electric vehicles based on the Improved Grey Wolf Optimization algorithm to improve the timeliness and accuracy of charging safety early warning. The findings reveal that the proposed model can reliably recognize abnormal charging voltage and issue timely warnings.
JOURNAL OF ENERGY STORAGE
(2022)
Review
Energy & Fuels
Shunli Wang et al.
Summary: This paper discusses the importance of lithium-ion battery state prediction and the challenges with accuracy and efficiency using data-driven methods. By improving the convolutional neural network for data modeling and utilizing deep learning algorithms for state prediction, the accuracy and robustness can be improved, providing a solution for reliable state prediction of lithium-ion batteries.
Article
Thermodynamics
Yan Ma et al.
Summary: This paper proposes a novel method for state of health (SOH) estimation of electric vehicles (EVs) based on improved long short-term memory (LSTM) and health indicators (HIs) extraction from charging-discharging process. By selecting external characteristic parameters related to voltage, current, and temperature as HIs and using correlation analysis and information elimination methods, the method accurately estimates the battery capacity. Additionally, the proposed method utilizes differential evolution grey wolf optimizer (DEGWO) for hyperparameters optimization, improving the performance of the model. Experimental results using battery datasets from NASA and MIT demonstrate the high accuracy and fitting performance of the proposed method for different types of batteries.
Article
Thermodynamics
Emma Soderang et al.
Summary: This study explores the feasibility of using a physics-based combustion engine model and an electrical power plant model in real-time co-simulation. By simplifying the detailed engine model into a fast-running model and coupling it with the power plant control model, real-time coordinated control and predictive simulation can be achieved.
ENERGY CONVERSION AND MANAGEMENT
(2022)
Article
Energy & Fuels
Kausthubharam et al.
Summary: This article investigates the stress states of an electrode particle during lithiation, considering both intrinsic and extrinsic factors. The influence of concentration dependent properties, external constraints, and charging rate on stress magnitude and concentration gradient is explored. It is found that the behavior of the electrode particle differs under constrained and unconstrained expansion, and the charging rate affects both stress and concentration gradient.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Energy & Fuels
J. G. Qu et al.
Summary: This study investigates the degradation of lithium-ion batteries (LIBs) during fast charging, focusing on the effects of operating temperature and current rate. The results reveal that the most significant factor influencing battery capacity fade changes from lithium plating to the growth of the solid-electrolyte interface (SEI) with increasing operating temperatures. High operating temperatures can alleviate capacity fade at higher current rates, while accelerating capacity fade at lower current rates. The study also analyzes the changes in electrode morphology and identifies the main degradation mechanisms as electrode material detachment, electrode particle cracking, SEI growth, lithium plating, and structural changes in layered material crystal. These findings provide insights for the development of fast-charging strategies and battery management system design.
JOURNAL OF ENERGY STORAGE
(2022)
Article
Electrochemistry
Tao Sun et al.
Summary: This study establishes a three-dimensional electrochemical model to analyze the inhomogeneous lithium plating behavior in large-format lithium-ion batteries. The results show that temperature gradients have a significant impact on the distribution of plated lithium and the battery voltage relaxation profile.
ELECTROCHIMICA ACTA
(2022)
Article
Thermodynamics
Shunli Wang et al.
Summary: In this paper, an improved feedforward-long short-term memory (FF-LSTM) modeling method is proposed for accurate whole-life-cycle state of charge (SOC) prediction of lithium-ion batteries. The method effectively considers the variations in current, voltage, and temperature. Experimental tests show that the battery capacity reduces significantly over time.
Article
Thermodynamics
Zhizuan Zhou et al.
Summary: This research investigates the impact of heating temperature on the thermal runaway (TR) of lithium-ion batteries (LIBs). It is found that TR occurs when the heating temperature exceeds 200 degrees Celsius, while only safety venting is observed at 175 degrees Celsius. As the heating temperature increases, the time interval between safety venting and TR decreases, and the temperature difference within the battery decreases. Additionally, the contribution of self-generated heat to trigger TR at different heating temperatures is identified.
Article
Energy & Fuels
Yi Xie et al.
Summary: This study proposes a method for optimizing the air channels in a scooter battery pack and demonstrates its ability to improve the thermal performance, SOC distribution, and lifespan of the battery pack through experiments.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2022)
Article
Engineering, Multidisciplinary
Yubin Liu et al.
Summary: This study proposes and demonstrates the temperature monitoring of lithium-ion batteries using an implanted fiber Bragg grating (FBG) sensor. The results show that the FBG sensor provides a better signal-to-noise ratio and highlights the necessity of recording internal temperature within BMS.
Article
Green & Sustainable Science & Technology
Marcel Held et al.
Summary: This study conducts practical experiments to assess the risks of thermal runaway and fire caused by electric vehicle lithium-ion batteries. It identifies and quantifies the soot depositions and contamination caused by the batteries, which mainly consist of metal oxides, lithium compounds, and fluoride compounds. The study also analyzes the necessary extent of decontamination through the analysis of sprinkling and cooling water.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2022)
Article
Energy & Fuels
C. X. He et al.
Summary: This study establishes a reliable thermal runaway model based on experimental kinetic analysis, providing insights into the mechanisms of thermal runaway and valuable guidance for the thermal safety design of lithium-ion batteries.
Article
Thermodynamics
Siqi Chen et al.
Summary: This study proposes a parallel liquid cooling system for fast charging of prismatic battery modules to achieve the shortest charging interval and thermal safety. Sensitivity analysis and response surface analysis are conducted to explore the impact of design parameters, and a multi-objective optimization design is performed. Experimental validation shows that the optimal design improves cooling effect, temperature uniformity, and energy cost.
APPLIED THERMAL ENGINEERING
(2022)
Article
Thermodynamics
Wencan Zhang et al.
Summary: This study establishes a prediction model to reveal the internal temperature of lithium-ion batteries under various boundary conditions. Internal and surface temperatures are obtained by inserting thermocouples, and the thermal network method is used to calculate the battery internal temperature under different cooling modes. Experimental data verifies the accuracy of the model and highlights the importance of internal temperature.
APPLIED THERMAL ENGINEERING
(2022)
Proceedings Paper
Materials Science, Multidisciplinary
Farzad Jaliliantabar et al.
Summary: Lithium-ion batteries generate heat during operation, which affects their performance and lifespan. A phase change materials-based thermal management system can be used to control temperature and improve battery performance. This study developed an artificial neural network model to predict the temperature of lithium-ion batteries equipped with a thermal management system, and demonstrated its accuracy and suitability.
MATERIALS TODAY-PROCEEDINGS
(2022)
Article
Energy & Fuels
Guan-Jhu Chen et al.
Summary: A novel method is proposed to find the optimal charging pattern for a five stage constant current charging method, taking into account both charging time and charging loss. Experimental results show that this method improves charging efficiency and reduces temperature rise, leading to an increased battery life cycle.
JOURNAL OF ENERGY STORAGE
(2021)
Article
Engineering, Electrical & Electronic
Fei Xiao et al.
Summary: A novel data-driven SOC estimation approach for Lithium-ion batteries is proposed in this paper, utilizing a technology that integrates deep learning with kernel methods to capture structural properties and estimate uncertainty. The proposed method demonstrates satisfactory performance and strong robustness against unknown initial SOC and outliers, making informed decisions for battery management system.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS
(2021)
Article
Thermodynamics
Manuel Antonio Perez Estevez et al.
Summary: An electro-thermal model of a single lithium-ion battery cell was developed in this work, which showed good dynamic and static prediction performance by automatically extracting RC circuit parameters from pulse discharge tests.
Article
Energy & Fuels
Chunyu Wang et al.
Summary: A novel method for identifying thermal model parameters of lithium-ion batteries is proposed in this paper, which allows for fast and continuous identification of entropy coefficient with lower time and equipment costs. By comparing the results with traditional methods, the superiority of the model with dynamic entropy coefficient treatment is demonstrated, especially at high temperatures.
JOURNAL OF ENERGY STORAGE
(2021)
Article
Green & Sustainable Science & Technology
Ghanishtha Bhatti et al.
Summary: This study aims to comprehensively review the application of digital twin technology in smart electric vehicles, systematically building the conceptual groundwork for the reader to explore the potential and challenges within the smart vehicle system, evaluating its holistic technical and socio-economic impact.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
(2021)
Article
Energy & Fuels
Jan Kleiner et al.
Summary: An innovative NARX network was developed and compared to traditional feedforward networks for temperature prediction in Li-ion batteries, demonstrating higher accuracy and robustness. In terms of long-term prediction and dynamic applications, the NARX network showed superior performance.
JOURNAL OF ENERGY STORAGE
(2021)
Article
Engineering, Electrical & Electronic
Lingjun Song et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS
(2020)
Article
Chemistry, Physical
Xiao Du et al.
JOURNAL OF POWER SOURCES
(2020)
Article
Energy & Fuels
Weihan Li et al.
JOURNAL OF ENERGY STORAGE
(2020)
Article
Electrochemistry
Dafang Wang et al.
ELECTROCHIMICA ACTA
(2020)
Article
Engineering, Electrical & Electronic
X. Qu et al.
MICROELECTRONICS RELIABILITY
(2020)
Article
Thermodynamics
Siqi Chen et al.
APPLIED THERMAL ENGINEERING
(2019)
Article
Thermodynamics
Z. Lu et al.
APPLIED THERMAL ENGINEERING
(2019)
Article
Engineering, Electrical & Electronic
Xiaokang Li et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS
(2019)
Article
Chemistry, Analytical
Susana Novais et al.
