Related references
Note: Only part of the references are listed.Dynamic modelling of the steady state and load processing operation of a domestic refrigerator cooled through natural convection
Salman Mustafa Husain et al.
INTERNATIONAL JOURNAL OF REFRIGERATION (2023)
Thermal Energy Storage Air-conditioning Demand Response Control Using Elman Neural Network Prediction Model
Qinglong Meng et al.
SUSTAINABLE CITIES AND SOCIETY (2022)
Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review
Pushpendra Kumar Singh Rathore et al.
SUSTAINABLE CITIES AND SOCIETY (2022)
A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling
Xiaoqin Sun et al.
JOURNAL OF ENERGY STORAGE (2022)
Developments in phase change material (PCM) doped energy efficient polyurethane (PU) foam for perishable food cold-storage applications: A review
Saurav Sarkar et al.
JOURNAL OF ENERGY STORAGE (2022)
Analysis of the effects of porous media parameters and inclination angle on the thermal storage and efficiency improvement of a photovoltaic-phase change material system
Nazanin Variji et al.
JOURNAL OF ENERGY STORAGE (2022)
Parametric analysis and optimization of a novel photovoltaic trombe wall system with venetian blinds: Experimental and computational study
Kashif Irshad et al.
CASE STUDIES IN THERMAL ENGINEERING (2022)
Design for energy flexibility in smart buildings through solar based and thermal storage systems: Modelling, simulation and control for the system optimization
Anthony Maturo et al.
ENERGY (2022)
Crystal mud transparent slime as a glazing material for net-zero energy buildings: Enhanced energy savings, diurnal lighting, and CO2 mitigation
A. Vishnu Priya et al.
ENERGY FOR SUSTAINABLE DEVELOPMENT (2022)
Description of phase change materials (PCMs) used in buildings under various climates: A review
Lisa Liu et al.
JOURNAL OF ENERGY STORAGE (2022)
Analysis of cold thermal energy storage using phase change materials in freezers
Armin Ghodrati et al.
JOURNAL OF ENERGY STORAGE (2022)
Which one is more effective to add to building envelope: Phase change material, thermal insulation, or their combination to meet zero-carbon-ready buildings?
Rasool Kalbasi et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Preparation of a novel diatomite-based PCM gypsum board for temperature-humidity control of buildings
Yingying Yang et al.
BUILDING AND ENVIRONMENT (2022)
Grid Integration Challenges and Solution Strategies for Solar PV Systems: A Review
Md Shafiullah et al.
IEEE ACCESS (2022)
Effects of carbon-based fillers on thermal properties of fatty acids and their eutectics as phase change materials used for thermal energy storage: A Review
Amir Al-Ahmed et al.
JOURNAL OF ENERGY STORAGE (2021)
Preparation of a Sustainable Shape-Stabilized Phase Change Material for Thermal Energy Storage Based on Mg2+-Doped CaCO3/PEG Composites
Md Hasan Zahir et al.
NANOMATERIALS (2021)
A review on zero energy buildings – Pros and cons
Tabbi Wilberforce et al.
Energy and Built Environment (2021)
Electricity Generation in Saudi Arabia: Tracing Opportunities and Challenges to Reducing Greenhouse Gas Emissions
Syed Masiur Rahman et al.
IEEE ACCESS (2021)
Optimal design of a thermal energy storage system using phase change materials for a net-zero energy Solar Decathlon house
Wenye Lin et al.
ENERGY AND BUILDINGS (2020)
Modulating thermal load through lightweight residential building walls using thermal energy storage and controlled precooling strategy
Ravi Anant Kishore et al.
APPLIED THERMAL ENGINEERING (2020)
Experimental study on the effects of direct sun radiation on the dynamic thermal behavior of a floor-heating system
Chihebedine Beji et al.
SOLAR ENERGY (2020)
Grid Integration Challenges of Wind Energy: A Review
Shakir D. Ahmed et al.
IEEE ACCESS (2020)
Study of thermoelectric and photovoltaic facade system for energy efficient building development: A review
Kashif Irshad et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Sizing and life-cycle assessment of building integrated thermoelectric air cooling and photovoltaic wall system
Kashif Irshad et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal analysis of multi-layer walls containing geopolymer concrete and phase change materials for building applications
Vinh Duy Cao et al.
ENERGY (2019)
Efficiency analysis of utilizing phase change materials as grout for a vertical U-tube heat exchanger coupled ground source heat pump system
Fei Chen et al.
APPLIED THERMAL ENGINEERING (2018)
Study on the coupling heating system of floor radiation and sunspace based on energy storage technology
Shilei Lu et al.
ENERGY AND BUILDINGS (2018)
Thermal inertia in buildings: A review of impacts across climate and building use
Stijn Verbeke et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Renewable energy performance contracting in the tertiary sector Standardization to overcome barriers in Greece
Maria Frangou et al.
RENEWABLE ENERGY (2018)
Efficiency in Heating Operation of Low-Temperature Radiant Systems Working under Dynamic Conditions in Different Kinds of Buildings
Giulia Alessio et al.
APPLIED SCIENCES-BASEL (2018)
Application of phase change materials in gypsum boards to meet building energy conservation goals
Naser P. Sharifi et al.
ENERGY AND BUILDINGS (2017)
A review on current status and challenges of inorganic phase change materials for thermal energy storage systems
Shamseldin A. Mohamed et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Yearly energy performance of a photovoltaic-phase change material (PV-PCM) system in hot climate
A. Hasan et al.
SOLAR ENERGY (2017)
A review on phase change material application in building
Yaping Cui et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
Phase change materials for improving the building thermal inertia
Amine Laaouatni et al.
MATERIALS & ENERGY I (2015) / MATERIALS & ENERGY II (2016) (2017)
Using Thermal Inertia of Buildings with Phase Change Material for Demand Response
Zahra Rahimpour et al.
IMPROVING RESIDENTIAL ENERGY EFFICIENCY INTERNATIONAL CONFERENCE, IREE 2017 (2017)
Case Study of a Nearly Zero Energy Building in Italian Climatic Conditions
Hassan Saeed Khan et al.
INFRASTRUCTURES (2017)
Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings
Sayanthan Ramakrishnan et al.
ENERGY AND BUILDINGS (2016)
Effect of an incompletely closed window shutter on indoor illuminance level and heat gain
Esam M. Alawadhi
ENERGY AND BUILDINGS (2016)
Thermal performance investigation and optimization of buildings with integrated phase change materials and solar photovoltaic thermal collectors
Wenye Lin et al.
ENERGY AND BUILDINGS (2016)
Impact of integrated photovoltaic-phase change material system on building energy efficiency in hot climate
Ahmad Hasan et al.
ENERGY AND BUILDINGS (2016)
Thermal performance assessment of encapsulated PCM based thermal management system to reduce peak energy demand in buildings
V. V. Tyagi et al.
ENERGY AND BUILDINGS (2016)
Evaluation of the application of Phase Change Materials (PCM) on the envelope of a typical dwelling in the Mediterranean region
G. P. Panayiotou et al.
RENEWABLE ENERGY (2016)
Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings
M. A. Kibria et al.
SOLAR ENERGY (2016)
Simulating the Inter-Building Effect on energy consumption from embedding phase change materials in building envelopes
Yilong Han et al.
SUSTAINABLE CITIES AND SOCIETY (2016)
Thermal analysis of PCM-filled glass windows in hot summer and cold winter area
Shuhong Li et al.
INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES (2016)
Effect of indoor design temperature on the heating and cooling transmission loads
Meral Ozel
JOURNAL OF BUILDING ENGINEERING (2016)
Fener: A Radiance-based modelling approach to assess the thermal and daylighting performance of complex fenestration systems in office spaces
Bruno Bueno et al.
ENERGY AND BUILDINGS (2015)
Phase change materials and products for building applications: A state-of-the-art review and future research opportunities
Simen Edsjo Kalnaes et al.
ENERGY AND BUILDINGS (2015)
Phase change materials and thermal energy storage for buildings
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2015)
On the use of plug-and-play walls (PPW) for evaluating thermal enhancement technologies for building enclosures: Evaluation of a thin phase change material (PCM) layer
Kyoung Ok Lee et al.
ENERGY AND BUILDINGS (2015)
A review of thermal energy storage technologies and control approaches for solar cooling
Sergio Pintaldi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Increased photovoltaic performance through temperature regulation by phase change materials: Materials comparison in different climates
A. Hasan et al.
SOLAR ENERGY (2015)
Phase change materials (PCMs) integrated into transparent building elements: a review
Paris A. Fokaides et al.
MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY (2015)
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
Kaushik Biswas et al.
APPLIED ENERGY (2014)
On the placement of a phase change material thermal shield within the cavity of buildings walls for heat transfer rate reduction
Xing Jin et al.
ENERGY (2014)
Reprint of Assessment of approaches for modeling louver shading devices in building energy simulation programs
D. Saelens et al.
ENERGY AND BUILDINGS (2014)
A ventilated cooling ceiling with integrated latent heat storage-Monitoring results
Helmut Weinlaeder et al.
ENERGY AND BUILDINGS (2014)
Thermal performance of an aluminum honeycomb wallboard incorporating microencapsulated PCM
Chi-ming Lai et al.
ENERGY AND BUILDINGS (2014)
Effect of the roller blinds on heat losses through a double-glazing window during heating season in Central Europe
Czeslaw Oleskowicz-Popiel et al.
ENERGY AND BUILDINGS (2014)
Designing building envelope with PCM wallboards: Design tool development
Arash Bastani et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review
Pere Moreno et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium
A. Jamekhorshid et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Dynamic performance of water-based radiant floors during start-up and high-intensity solar radiation
Kang Zhao et al.
SOLAR ENERGY (2014)
Impact of external shading devices on thermal and daylighting performance of offices in hot climate regions
Ahmed A. Y. Freewan
SOLAR ENERGY (2014)
Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems
A. Arteconi et al.
APPLIED THERMAL ENGINEERING (2013)
Experimental study of a ventilated facade with PCM during winter period
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2013)
Thermal analysis of a ventilated facade with PCM for cooling applications
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2013)
Peak load shifting control using different cold thermal energy storage facilities in commercial buildings: A review
Yongjun Sun et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
New kinds of energy-storing building composite PCMs for thermal energy storage
Alper Bicer et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Exploiting solar energy potential through thermal energy storage in Slovenia and Turkey
Uros Stritih et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Phase change material (PCM) storage for free cooling of buildings-A review
Adeel Waqas et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
A comparative analysis of the energy performance of traditional wooden shutters and contemporary aluminium roller shutters in Istanbul, a case study
Fatih Yazicioglu
MEDITERRANEAN GREEN ENERGY FORUM 2013: PROCEEDINGS OF AN INTERNATIONAL CONFERENCE MGEF-13 (2013)
Experimental and numerical study of a usual brick filled with PCM to improve the thermal inertia of buildings
Necib Hichem et al.
TERRAGREEN 13 INTERNATIONAL CONFERENCE 2013 - ADVANCEMENTS IN RENEWABLE ENERGY AND CLEAN ENVIRONMENT (2013)
Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: A passive construction solution
Tiago Silva et al.
ENERGY AND BUILDINGS (2012)
Thermal analysis of the application of pcm and low emissivity coating in hollow bricks
Paolo Principi et al.
ENERGY AND BUILDINGS (2012)
Using phase change materials in window shutter to reduce the solar heat gain
Esam M. Alawadhi
ENERGY AND BUILDINGS (2012)
The shape stabilization of paraffin phase change material to reduce graphite nanofiber settling during the phase change process
Ryan Ehid et al.
ENERGY CONVERSION AND MANAGEMENT (2012)
Trombe walls: A review of opportunities and challenges in research and development
Omidreza Saadatian et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Sustainable thermal energy storage technologies for buildings: A review
R. Parameshwaran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Synthesis and thermal properties of poly(styrene-co-ally alcohol)-graft-stearic acid copolymers as novel solid-solid PCMs for thermal energy storage
Ahmet Sari et al.
SOLAR ENERGY (2012)
Technical potential for photovoltaics on buildings in the EU-27
P. R. Defaix et al.
SOLAR ENERGY (2012)
Field thermal performance of naturally ventilated solar roof with PCM heat sink
Jan Kosny et al.
SOLAR ENERGY (2012)
Energy and comfort performance of thermally activated building systems including occupant behavior
Dirk Saelens et al.
BUILDING AND ENVIRONMENT (2011)
Building roof with conical holes containing PCM to reduce the cooling load: Numerical study
Esam M. Alawadhi et al.
ENERGY CONVERSION AND MANAGEMENT (2011)
A review on phase change materials integrated in building walls
Frederic Kuznik et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Materials used as PCM in thermal energy storage in buildings: A review
L. F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard
Frederic Kuznik et al.
RENEWABLE ENERGY (2011)
Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses
A. G. Entrop et al.
SOLAR ENERGY (2011)
Energy and exergy analysis of hybrid micro-channel photovoltaic thermal module
Sanjay Agrawal et al.
SOLAR ENERGY (2011)
Effect of louver shading devices on building energy requirements
Ana I. Palmero-Marrero et al.
APPLIED ENERGY (2010)
Natural convection at an indoor glazing surface with different window blinds
Cristian Cuevas et al.
ENERGY AND BUILDINGS (2010)
The energy savings potential of using dynamic external louvers in an office building
Fawwaz Hammad et al.
ENERGY AND BUILDINGS (2010)
Experimental study of using PCM in brick constructive solutions for passive cooling
A. Castell et al.
ENERGY AND BUILDINGS (2010)
Phase change materials for building applications: A state-of-the-art review
Ruben Baetens et al.
ENERGY AND BUILDINGS (2010)
Influence of windows on the energy balance of apartment buildings in Amman
K. Hassouneh et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics
A. Hasan et al.
SOLAR ENERGY (2010)
Synthesis, thermal energy storage properties and thermal reliability of some fatty acid esters with glycerol as novel solid-liquid phase change materials
Ahmet Sari et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Detailed energy saving performance analyses on thermal mass walls demonstrated in a zero energy house
L. Zhu et al.
ENERGY AND BUILDINGS (2009)
A CFD study of convection in a double glazed window with an enclosed pleated blind
R. Dalal et al.
ENERGY AND BUILDINGS (2009)
A comparative study of naturally ventilated and gas filled windows for hot climates
Kamal A. R. Ismail et al.
ENERGY CONVERSION AND MANAGEMENT (2009)
Review on thermal energy storage with phase change materials and applications
Atul Sharma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management
A. Pasupathy et al.
APPLIED THERMAL ENGINEERING (2008)
On the heat transfer rate reduction of structural insulated panels (SIPS) outfitted with phase change materials (PCMs)
Mario A. Medina et al.
ENERGY (2008)
Temperature reduction due to the application of phase change materials
Conrad Voelker et al.
ENERGY AND BUILDINGS (2008)
Comparison between PCM filled glass windows and absorbing gas filled windows
Kamal A. R. Ismail et al.
ENERGY AND BUILDINGS (2008)
Thermal analysis of a building brick containing phase change material
Esam M. Alawadhi
ENERGY AND BUILDINGS (2008)
Phase change material-based building architecture for thermal management in residential and commercial establishments
A. Pasupathy et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2008)
The influence of wall orientation and exterior surface solar absorptivity on time lag and decrement factor in the Greek region
K. J. Kontoleon et al.
RENEWABLE ENERGY (2008)
Capric-myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage
Ali Karaipekli et al.
RENEWABLE ENERGY (2008)
The effect of south wall's outdoor absorption coefficient on time lag, decrement factor and temperature variations
K. J. Kontoleon et al.
ENERGY AND BUILDINGS (2007)
PCM thermal storage in buildings: A state of art
Vineet Veer Tyagi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)
Enthalpy of melting and solidification of sulfonated paraffins as phase change materials for thermal energy storage
Cemil Alkan
THERMOCHIMICA ACTA (2006)
The application of a validated numerical model to predict the energy conservation potential of using phase change materials in the fabric of a building
MJ Huang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2006)
Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage - Heat response in small scale experiments
K Nagano et al.
ENERGY AND BUILDINGS (2006)
Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls
A Carbonari et al.
ENERGY AND BUILDINGS (2006)
The use of a heavy internal wall with a ventilated air gap to store solar energy and improve summer comfort in timber frame houses
G Fraisse et al.
ENERGY AND BUILDINGS (2006)
Experimental investigation and computer simulation of thermal behaviour of wallboards containing a phase change material
M Ahmad et al.
ENERGY AND BUILDINGS (2006)
Conjugate heat transfer analysis of double pane windows
O Aydin
BUILDING AND ENVIRONMENT (2006)
Phase change materials for limiting temperature rise in building integrated photovoltaics
M. J. Huang et al.
SOLAR ENERGY (2006)
Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material
M Ahmad et al.
ENERGY AND BUILDINGS (2006)
Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres
C Arkar et al.
THERMOCHIMICA ACTA (2005)
Potential wind power generation in the State of Kuwait
W Al-Nassar et al.
RENEWABLE ENERGY (2005)
Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings
X Xu et al.
ENERGY AND BUILDINGS (2005)
Development of a thermally enhanced frame wall with phase-change materials for on-peak air conditioning demand reduction and energy savings in residential buildings
M Zhang et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2005)
PCM-facade-panel for daylighting and room heating
H Weinlader et al.
SOLAR ENERGY (2005)
Thermal regulation of building-integrated photovoltaics using phase change materials
MJ Huang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
A review on phase change energy storage: materials and applications
MM Farid et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
Comparison between polystyrene and fiberglass roof insulation in warm and cold climates
KA Al-Sallal
RENEWABLE ENERGY (2003)
Modeling and simulation of a simple glass window
KAR Ismail et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2003)
Numerical analysis of melting with constant heat flux heating in a thermal energy storage system
ZL Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2002)
Thermal performance of a water-phase change material solar collector
A Kürklü et al.
RENEWABLE ENERGY (2002)
Minimizing thermal bridging through window systems in buildings of hot regions
AE Ben-Nakhi
APPLIED THERMAL ENGINEERING (2002)
Numerical simulation of solidification processes in enclosures
J Szimmat
HEAT AND MASS TRANSFER (2002)
A numerical study of solidification of n-hexadecane based on the enthalpy formulation
Q Duan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Thermal performance of a eutectic mixture of lauric and stearic acids as PCM encapsulated in the annulus of two concentric pipes
A Sari et al.
SOLAR ENERGY (2002)
Thermally effective windows with moving phase change material curtains
KAR Ismail et al.
APPLIED THERMAL ENGINEERING (2001)
Control aspects of latent heat storage and recovery in concrete
T Lee et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2000)
Composite salt-hydrate concrete system for building energy storage
M Hadjieva et al.
RENEWABLE ENERGY (2000)
Thermal dynamics of wallboard with latent heat storage
DA Neeper
SOLAR ENERGY (2000)
Share Paper
