☆ 4.7 Article

Aging of lithium-ion battery separators during battery cycling

JOURNAL OF ENERGY STORAGE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Recovery and regeneration of anode graphite from spent lithium-ion batteries through deep eutectic solvent treatment: Structural characteristics, electrochemical performance and regeneration mechanism

Yiming Lai et al.

Summary: The recovery of graphite from spent lithium-ion batteries (LIBs) using a novel deep eutectic solvent (DES) leaching method is proposed. The DES leaching effectively removes impurities from spent graphite and restores its crystal structure and morphology. The regenerated graphite exhibits excellent electrochemical performance, comparable to commercial graphite. This study provides a facile and green method for the closed-loop utilization of spent graphite in LIBs.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Energy & Fuels

Effect of High-Rate Cycle Aging and Over-Discharge on NCM811 (LiNi0.8Co0.1Mn0.1O2) Batteries

Tao Yin et al.

Summary: Inconsistent monomer batteries in a battery pack can lead to over-discharge and pose safety risks. High-rate aging and over-discharge result in decreased battery capacity, increased temperature, and micro short-circuit. Furthermore, these conditions cause degradation of the separator, damage to positive and negative materials, and uneven deposition, which increase the risk of thermal runaway and short-circuit in the battery.

ENERGIES (2022)

Add to Collection

Article Chemistry, Physical

Polymer-in-ceramic flexible separators for Li-ion batteries

Eric Jianfeng Cheng et al.

Summary: The performance of polymer-in-LLZO separator as a Li-ion battery separator was studied, and it showed higher thermal stability, higher ionic conductivity, and better wettability compared to commercial PP separator Celgard 2400.

IONICS (2022)

Add to Collection

Article Chemistry, Physical

Stress evolution and thickness change of a lithium-ion pouch cell under various cycling conditions

Congrui Jin et al.

Summary: This study investigates the behavior of a single pouch cell during charge/discharge cycles by measuring stress and thickness changes. The results show that increasing the charge/discharge current generally decreases the stress increase percentage and increases the volume expansion percentage. Additionally, increasing the upper cutoff voltage generally increases the stress increase percentage and volume expansion percentage. These findings provide important insights for the design of battery packs.

JOURNAL OF POWER SOURCES ADVANCES (2022)

Add to Collection

Article Electrochemistry

Separator Aging and Performance Degradation Caused by Battery Expansion: Cyclic Compression Test Simulation of Polypropylene Separator

Zidan Yuan et al.

Summary: The study found that the polypropylene separator exhibits varying degrees of transparent wrinkles on the surface under different compression strains, with higher impedance and lower ionic conductivity as the strain increases. Discharge capacity decreases significantly at 12.5% and 15% strain, with the voltage platform of charge and discharge reducing noticeably at 15% strain. The damage to the lamellae skeleton around the transparent wrinkles in the separator increases with cycle times and compression strain, affecting electrochemical performance.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Review Energy & Fuels

Lithium-Ion Battery Operation, Degradation, and Aging Mechanism in Electric Vehicles: An Overview

Jia Guo et al.

Summary: This article systematically describes the aging mechanism of lithium-ion batteries in real-life electric vehicle applications, focusing on the aging behavior of batteries in charging, standby, and driving modes under different working conditions. It provides practical guidance and methods to prolong battery life for users, battery designers, vehicle manufacturers, and material recovery companies.

ENERGIES (2021)

Add to Collection

Article Chemistry, Physical

Al2O3/TiO2 coated separators: Roll-to-roll processing and implications for improved battery safety and performance

Dhrupad Parikh et al.

Summary: Developing separators with improved thermal stability and higher electrolyte uptake is crucial for enhancing the safety and performance of lithium-ion batteries. Ceramic coatings of Al2O3 and TiO2 applied on a propylene membrane showed enhanced thermal stability and electrolyte affinity without compromising rate performance.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Applied

Unrevealing the effects of low temperature on cycling life of 21700-type cylindrical Li-ion batteries

Daozhong Hu et al.

Summary: The capacity degradation of batteries at low temperatures is mainly related to the lithium plating at graphite anodes, the formation of unsatisfied solid mixture on the anode, solvent precipitation in the electrolytes and blockage of separator pores, as well as the uneven dissolution of transition metal ions from the cathode.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Aqueous aluminide ceramic coating polyethylene separators for lithium-ion batteries

Yuan Wang et al.

SOLID STATE IONICS (2020)

Add to Collection

Article Engineering, Mechanical

On electrolyte wetting through lithium-ion battery separators

Ali Davoodabadi et al.

EXTREME MECHANICS LETTERS (2020)

Add to Collection

Article Electrochemistry

Volume Deformation of Large-Format Lithium Ion Batteries under Different Degradation Paths

Ruihe Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Volume Changes of Graphite Anodes Revisited: A Combined Operando X-ray Diffraction and In Situ Pressure Analysis Study

Simon Schweidler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

Strain distribution and failure mode of polymer separators for Li-ion batteries under biaxial loading

Sergiy Kalnaus et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Characterization of Surface Free Energy of Composite Electrodes for Lithium-Ion Batteries

Ali Davoodabadi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mechanism for capacity fading of 18650 cylindrical lithium ion batteries

Jian-liang Cheng et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Degradation of battery separators under charge-discharge cycles

X. Zhang et al.

RSC ADVANCES (2017)

Add to Collection

Article Materials Science, Biomaterials

Polymer brushes based on PLLA-b-PEO colloids for the preparation of protein resistant PLA surfaces

E. Mazl Chanova et al.

BIOMATERIALS SCIENCE (2017)

Add to Collection

Review Chemistry, Physical

A review of gassing behavior in Li4Ti5O12-based lithium ion batteries

Cuiping Han et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Physical

The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling

Seong Jin An et al.

CARBON (2016)

Add to Collection

Article Chemistry, Physical

Swelling and softening of lithium-ion battery separators in electrolyte solvents

Gennady Y. Gor et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

A review of recent developments in membrane separators for rechargeable lithium-ion batteries

Hun Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Electrochemistry

Probing the Roles of Polymeric Separators in Lithium-Ion Battery Capacity Fade at Elevated Temperatures

Jianchao Chen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Engineering, Chemical

Surface analysis of cobalt-enriched crushed products of spent lithium-ion batteries by X-ray photoelectron spectroscopy

Tao Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2014)

Add to Collection

Article Multidisciplinary Sciences

Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery

Jianjun Zhang et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium-ion batteries. A look into the future

Bruno Scrosati et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Battery separators

P Arora et al.

CHEMICAL REVIEWS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.