Related references
Note: Only part of the references are listed.Homogenized characterization of cylindrical Li-ion battery cells using elliptical approximation
Mehdi Gilaki et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)
Quantitative analysis of the inhibition effect of rising temperature and pulse charging on Lithium dendrite growth
Dongge Qiao et al.
JOURNAL OF ENERGY STORAGE (2022)
Safety Concerns for the Management of End-of-Life Lithium-Ion Batteries
Zhuowen Chen et al.
GLOBAL CHALLENGES (2022)
Toward safe and rapid battery charging: Design optimal fast charging strategies thorough aphysics-basedmodel considering lithium plating
Changhong Liu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)
Sustainable Li-Ion Batteries: Chemistry and Recycling
Jedrzej Piatek et al.
ADVANCED ENERGY MATERIALS (2021)
Rapid Sorting and Regrouping of Retired Lithium-Ion Battery Modules for Echelon Utilization Based on Partial Charging Curves
Xin Lai et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2021)
Li-ion battery recycling challenges
Xiaotu Ma et al.
CHEM (2021)
Perspective-Application-Driven Industrial-Scale Manufacturing of Li/Na-Ion Battery Cathodes: Current Status and Future Perspective
Chanakya Karra et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Multidisciplinary design for structural integrity using a collaborative optimization method based on adaptive surrogate modelling
Debiao Meng et al.
MATERIALS & DESIGN (2021)
Direct Recycling R&D at the ReCell Center
Linda Gaines et al.
RECYCLING (2021)
Parameter optimization and yield prediction of cathode coating separation process for direct recycling of end-of-life lithium-ion batteries
Liurui Li et al.
RSC ADVANCES (2021)
A review on sustainable recycling technologies for lithium-ion batteries
Zain A. Kader et al.
EMERGENT MATERIALS (2021)
Classification of Calendering-Induced Electrode Defects and Their Influence on Subsequent Processes of Lithium-Ion Battery Production
Till Guenther et al.
ENERGY TECHNOLOGY (2020)
Heated Calendering of Cathodes for Lithium-Ion Batteries with Varied Carbon Black and Binder Contents
Chris Meyer et al.
ENERGY TECHNOLOGY (2020)
Image-based defect detection in lithium-ion battery electrode using convolutional neural networks
Olatomiwa Badmos et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Importance and applications of DOE/optimization methods in PEM fuel cells: A review
Gamze Karanfil
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Experimental and simulation study on thermal characteristics of 18,650 lithium-iron-phosphate battery with and without spot-welding tabs
Shuaihua Liu et al.
APPLIED THERMAL ENGINEERING (2020)
Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects
Ersha Fan et al.
CHEMICAL REVIEWS (2020)
Passive impedance spectroscopy for monitoring lithium-ion battery cells during vehicle operation
Bernhard Liebhart et al.
JOURNAL OF POWER SOURCES (2020)
Techno-economic and environmental disassembly planning of lithium-ion electric vehicle battery packs for remanufacturing
M. Alfaro-Algaba et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
A survey on kriging-based infill algorithms for multiobjective simulation optimization
Sebastian Rojas-Gonzalez et al.
COMPUTERS & OPERATIONS RESEARCH (2020)
Li-Ion Batteries: A Review of a Key Technology for Transport Decarbonization
Daniele Stampatori et al.
ENERGIES (2020)
Strategies to limit degradation and maximize Li-ion battery service lifetime - Critical review and guidance for stakeholders
Maxwell Woody et al.
JOURNAL OF ENERGY STORAGE (2020)
A Comprehensive Review of Li-Ion Battery Materials and Their Recycling Techniques
Hee-Je Kim et al.
ELECTRONICS (2020)
State of Charge Estimation for Li-Ion Batteries Based on an Unscented H-Infinity Filter
Yuanyuan Liu et al.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2020)
Energy and environmental aspects in recycling lithium-ion batteries: Concept of Battery Identity Global Passport
Yaocai Bai et al.
MATERIALS TODAY (2020)
The importance of design in lithium ion battery recycling - a critical review
Dana L. Thompson et al.
GREEN CHEMISTRY (2020)
Classification of spent Li-ion batteries based on ICP-OES/X-ray characterization of the cathode materials
Dragana Medic et al.
HEMIJSKA INDUSTRIJA (2020)
Toward Group Applications: A Critical Review of the Classification Strategies of Lithium-Ion Batteries
Ran Li et al.
WORLD ELECTRIC VEHICLE JOURNAL (2020)
Prospective LCA of the production and EoL recycling of a novel type of Li-ion battery for electric vehicles
Marco Raugei et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Recycling of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent lithium-ion batteries using mechanochemical activation and solid-state sintering
Xiangqi Meng et al.
WASTE MANAGEMENT (2019)
Comparative Life-Cycle Assessment of Li-Ion Batteries through Process-Based and Integrated Hybrid Approaches
Shipu Zhao et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Material flow analysis on critical raw materials of lithium-ion batteries in China
Jiali Song et al.
JOURNAL OF CLEANER PRODUCTION (2019)
A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
Anup Barai et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)
Recovery methods and regulation status of waste lithium-ion batteries in China: A mini review
Zhao Siqi et al.
WASTE MANAGEMENT & RESEARCH (2019)
Improved state of charge estimation for Li-ion batteries using fractional order extended Kalman filter
Kodjo S. R. Mawonou et al.
JOURNAL OF POWER SOURCES (2019)
Recycling lithium-ion batteries from electric vehicles
Gavin Harper et al.
NATURE (2019)
Electrode manufacturing for lithium-ion batteries-Analysis of current and next generation processing
W. Blake Hawley et al.
JOURNAL OF ENERGY STORAGE (2019)
Examining different recycling processes for lithium-ion batteries
Rebecca E. Ciez et al.
NATURE SUSTAINABILITY (2019)
A comparison of traditional manufacturing vs additive manufacturing, the best method for the job
Tanisha Pereira et al.
DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH (2019)
Revisiting and improving the preparation of silicon-based electrodes for lithium-ion batteries: ball milling impact on poly(acrylic acid) polymer binders
Thibaut Chartrel et al.
MATERIALS CHEMISTRY FRONTIERS (2019)
Ball milling: a green technology for the preparation and functionalisation of nanocellulose derivatives
Carmen C. Piras et al.
NANOSCALE ADVANCES (2019)
Considerations when Modelling EV Battery Circularity Systems
Martin Kurdve et al.
BATTERIES-BASEL (2019)
Recycling End-of-Life Electric Vehicle Lithium-Ion Batteries
Mengyuan Chen et al.
JOULE (2019)
Comparative Analysis of Lithium-Ion Battery Resistance Estimation Techniques for Battery Management Systems
Manoj Mathew et al.
ENERGIES (2018)
Providing a common base for life cycle assessments of Li-Ion batteries
Jens F. Peters et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effects of Residual Lithium in the precursors of Li[Ni1/3Co1/3Mn1/3]O2 on their lithium-ion battery performance
Minsang Jo et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2018)
Comparative study of various cathodes for lithium ion batteries using an enhanced Peukert capacity model
Ryan O'Malley et al.
JOURNAL OF POWER SOURCES (2018)
The lithium-ion battery: State of the art and future perspectives
Ghassan Zubi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
An overview of China's recyclable waste recycling and recommendations for integrated solutions
Shijiang Xiao et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
A review on the growing concern and potential management strategies of waste lithium-ion batteries
Kevin M. Winslow et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Modeling the potential impact of lithium recycling from EV batteries on lithium demand: A dynamic MFA approach
Saskia Ziemann et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Simplified modeling and parameter estimation to predict calendar life of Li-ion batteries
Yong Liu et al.
SOLID STATE IONICS (2018)
Research progress on silicon/carbon composite anode materials for lithium-ion battery
Xiaohui Shen et al.
JOURNAL OF ENERGY CHEMISTRY (2018)
Investigation of Physical Phenomena and Cutting Efficiency for Laser Cutting on Anode for Li-Ion Batteries
Dongkyoung Lee
APPLIED SCIENCES-BASEL (2018)
Resolving the Compositional and Structural Defects of Degraded LiNixCoyMnzO2 Particles to Directly Regenerate High-Performance Lithium-Ion Battery Cathodes
Yang Shi et al.
ACS ENERGY LETTERS (2018)
A cost and resource analysis of sodium-ion batteries
Christoph Vaalma et al.
NATURE REVIEWS MATERIALS (2018)
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Aiping Wang et al.
NPJ COMPUTATIONAL MATERIALS (2018)
Regenerating of LiNi0.5Co0.2Mn0.3O2 cathode materials from spent lithium-ion batteries
Jian Li et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Urban mining of lithium-ion batteries in Australia: Current state and future trends
Naomi J. Boxall et al.
MINERALS ENGINEERING (2018)
High Performance Cathode Recovery from Different Electric Vehicle Recycling Streams
Zhangfeng Zheng et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Novel Application of Repaired LiFePO4 as a Candidate Anode Material for Advanced Alkaline Rechargeable Batteries
Enbo Shangguan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Calendar aging of commercial Li-ion cells of different chemistries - A review
Matthieu Dubarry et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2018)
Forecasting Real Disassembly Time of Industrial Batteries based on Virtual MTM-UAS Data
Therese E. Schwarz et al.
25TH CIRP LIFE CYCLE ENGINEERING (LCE) CONFERENCE (2018)
Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries
Bastian G. Westphal et al.
JOURNAL OF ENERGY STORAGE (2018)
Key issues for Li-ion battery recycling
Linda Gaines et al.
MRS ENERGY & SUSTAINABILITY (2018)
Deterministic models of Li-ion battery aging: It is a matter of scale
Mehdi Jafari et al.
JOURNAL OF ENERGY STORAGE (2018)
Introduction to Electrochemical Impedance Spectroscopy as a Measurement Method for the Wetting Degree of Lithium-Ion Cells
Florian J. Guenter et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Laser ablation of electrodes for Li-ion battery remanufacturing
Monsuru Olalekan Ramoni et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Estimation of Waste Battery Generation and Analysis of the Waste Battery Recycling System in China
Xiaoxu Song et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
When Does the Operation of a Battery Become Environmentally Positive?
Karl-Heinz Pettinger et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Mechanochemical Process Enhanced Cobalt and Lithium Recycling from Wasted Lithium-Ion Batteries
Jie Guan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Recovery of Lithium, Nickel, Cobalt, and Manganese from Spent Lithium-Ion Batteries Using L-Tartaric Acid as a Leachant
Li-Po He et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Novel Approach for in Situ Recovery of Lithium Carbonate from Spent Lithium Ion Batteries Using Vacuum Metallurgy
Jiefeng Xiao et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Generation and management of waste electric vehicle batteries in China
ChengJian Xu et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
Current collectors as reducing agent to dissolve active materials of positive electrodes from Li-ion battery wastes
M. Joulie et al.
HYDROMETALLURGY (2017)
An investigation of the current status of recycling spent lithium-ion batteries from consumer electronics in China
Fu Gu et al.
JOURNAL OF CLEANER PRODUCTION (2017)
A promising approach for the recovery of high value-added metals from spent lithium-ion batteries
Juntao Hu et al.
JOURNAL OF POWER SOURCES (2017)
Fast formation cycling for lithium ion batteries
Seong Jin An et al.
JOURNAL OF POWER SOURCES (2017)
Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries
Mohanad Al-Shroofy et al.
JOURNAL OF POWER SOURCES (2017)
Cost and energy demand of producing nickel manganese cobalt cathode material for lithium ion batteries
Shabbir Ahmed et al.
JOURNAL OF POWER SOURCES (2017)
Direct regeneration of recycled cathode material mixture from scrapped LiFePO4 batteries
Xuelei Li et al.
JOURNAL OF POWER SOURCES (2017)
Recovery of lithium and cobalt from spent lithium-ion batteries using organic acids: Process optimization and kinetic aspects
Rabeeh Golmohammadzadeh et al.
WASTE MANAGEMENT (2017)
Direct regeneration of cathode materials from spent lithium iron phosphate batteries using a solid phase sintering method
X. Song et al.
RSC ADVANCES (2017)
Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes
Brandon Ludwig et al.
ADVANCED MATERIALS INTERFACES (2017)
Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation
Darjen Liu et al.
ENERGY TECHNOLOGY (2017)
Investigation of Laser Cutting Width of LiCoO2 Coated Aluminum for Lithium-Ion Batteries
Dongkyoung Lee et al.
APPLIED SCIENCES-BASEL (2017)
A degradation-based sorting method for lithium-ion battery reuse
Hao Chen et al.
PLOS ONE (2017)
Experimental investigation of parametric cell-to-cell variation and correlation based on 1100 commercial lithium-ion cells
Katharina Rumpf et al.
JOURNAL OF ENERGY STORAGE (2017)
A systematic model-based degradation behavior recognition and health monitoring method for lithium-ion batteries
Rui Xiong et al.
APPLIED ENERGY (2017)
Lithium-Ion Battery Supply Chain Considerations: Analysis of Potential Bottlenecks in Critical Metals
Elsa A. Olivetti et al.
JOULE (2017)
Testing of Commercial Electric Vehicle Battery Modules for Circular Economy Applications
Jakobus Groenewald et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2017)
Manufacturing energy analysis of lithium ion battery pack for electric vehicles
Chris Yuan et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Influence of high intensive dry mixing and calendering on relative electrode resistivity determined via an advanced two point approach
Bastian Georg Westphal et al.
JOURNAL OF ENERGY STORAGE (2017)
Quantifying Uncertainties in Reusing Lithium-Ion Batteries from Electric Vehicles
S. Rohr et al.
14TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING, GCSM 2016 (2017)
Remanufacturing cathode from end-of-life of lithium-ion secondary batteries by Nd:YAG laser radiation
Wei-wei Liu et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2016)
Solution Combustion Synthesis of Nanoscale Materials
Arvind Varma et al.
CHEMICAL REVIEWS (2016)
Towards high durable lithium ion batteries with waterborne LiFePO4 electrodes
Andriy Kvasha et al.
ELECTROCHIMICA ACTA (2016)
Influence of Electrode Density on the Performance of Li-Ion Batteries: Experimental and Simulation Results
Jelle Smekens et al.
ENERGIES (2016)
Degradation and stabilization of lithium cobalt oxide in aqueous electrolytes
Anirudh Ramanujapuram et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Cradle-to-Gate Emissions from a Commercial Electric Vehicle Li-Ion Battery: A Comparative Analysis
Hyung Chul Kim et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)
Environmentally friendly recycling and effective repairing of cathode powders from spent LiFePO4 batteries
Jiangping Chen et al.
GREEN CHEMISTRY (2016)
A systematic study of thick electrodes for high energy lithium ion batteries
Madhav Singh et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2016)
Environmentally-friendly oxygen-free roasting/wet magnetic separation technology for in situ recycling cobalt, lithium carbonate and graphite from spent LiCoO2/graphite lithium batteries
Jia Li et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Shabbir Ahmed et al.
JOURNAL OF POWER SOURCES (2016)
Novel solvent-free direct coating process for battery electrodes and their electrochemical performance
Dong-Won Park et al.
JOURNAL OF POWER SOURCES (2016)
Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources
D. Mohanty et al.
JOURNAL OF POWER SOURCES (2016)
Calendar Aging of Lithium-Ion Batteries I. Impact of the Graphite Anode on Capacity Fade
Peter Keil et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Generation and detection of metal ions and volatile organic compounds (VOCs) emissions from the pretreatment processes for recycling spent lithium-ion batteries
Jia Li et al.
WASTE MANAGEMENT (2016)
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Brandon Ludwig et al.
SCIENTIFIC REPORTS (2016)
The significance of Li-ion batteries in electric vehicle life-cycle energy and emissions and recycling's role in its reduction
J. B. Dunn et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries
Werner Bauer et al.
JOURNAL OF POWER SOURCES (2015)
A Model for Predicting Capacity Fade due to SEI Formation in a Commercial Graphite/LiFePO4 Cell
Henrik Ekstrom et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Li-ion battery materials: present and future
Naoki Nitta et al.
MATERIALS TODAY (2015)
By-product metals are technologically essential but have problematic supply
N. T. Nassar et al.
SCIENCE ADVANCES (2015)
Robot Assisted Disassembly for the Recycling of Electric Vehicle Batteries
Kathrin Wegener et al.
22ND CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2015)
Model-Based Parameter Identification of Healthy and Aged Li-ion Batteries for Electric Vehicle Applications
Ryan Ahmed et al.
SAE INTERNATIONAL JOURNAL OF ALTERNATIVE POWERTRAINS (2015)
Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review
Pratima Meshram et al.
HYDROMETALLURGY (2014)
Process Development for the Recycle of Spent Lithium Ion Batteries by Chemical Precipitation
Guoqiang Cai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Parallel disassembly sequence planning for complex products based on fuzzy-rough sets
Xiu Fen Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Survey and analysis of consumers' behaviour of waste mobile phone recycling in China
Jianfeng Yin et al.
JOURNAL OF CLEANER PRODUCTION (2014)
The food waste hierarchy as a framework for the management of food surplus and food waste
Effie Papargyropoulou et al.
JOURNAL OF CLEANER PRODUCTION (2014)
A Raman spectroscopic method to find binder distribution in electrodes during drying
Hideki Hagiwara et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
Economic and environmental characterization of an evolving Li-ion battery waste stream
Xue Wang et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2014)
Innovative application of ionic liquid to separate Al and cathode materials from spent high-power lithium-ion batteries
Xianlai Zeng et al.
JOURNAL OF HAZARDOUS MATERIALS (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Decision making model for lifecycle assessment of lithium-ion battery for electric vehicle - A case study for smart electric bus project in Korea
Sabai Thein et al.
JOURNAL OF POWER SOURCES (2014)
Calendar aging of commercial graphite/LiFePO4 cell - Predicting capacity fade under time dependent storage conditions
Sebastien Grolleau et al.
JOURNAL OF POWER SOURCES (2014)
The formation and stability of the solid electrolyte interface on the graphite anode
Victor A. Agubra et al.
JOURNAL OF POWER SOURCES (2014)
Calendar ageing analysis of a LiFePO4/graphite cell with dynamic model validations: Towards. realistic lifetime predictions
E. Sarasketa-Zabala et al.
JOURNAL OF POWER SOURCES (2014)
A closed loop process for recycling spent lithium ion batteries
Eric Gratz et al.
JOURNAL OF POWER SOURCES (2014)
A simple solvent method for the recovery of LixCoO2 and its applications in alkaline rechargeable batteries
Yanan Xu et al.
JOURNAL OF POWER SOURCES (2014)
A review on structure model and energy system design of lithium-ion battery in renewable energy vehicle
Yong Li et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
A method for pre-determining the optimal remanufacturing point of lithium ion batteries
Heng Zhang et al.
21ST CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2014)
A review of lithium supply and demand and a preliminary investigation of a room temperature method to recycle lithium ion batteries to recover lithium and other materials
Alexandru Sonoc et al.
21ST CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2014)
Mixed integer nonlinear programming tools: an updated practical overview
Claudia D'Ambrosio et al.
ANNALS OF OPERATIONS RESEARCH (2013)
Lithium availability and future production outlooks
Hanna Vikstrom et al.
APPLIED ENERGY (2013)
Potential Environmental and Human Health Impacts of Rechargeable Lithium Batteries in Electronic Waste
Daniel Hsing Po Kang et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)
A novel method to recycle mixed cathode materials for lithium ion batteries
Haiyang Zou et al.
GREEN CHEMISTRY (2013)
Evaluation on State of Charge Estimation of Batteries With Adaptive Extended Kalman Filter by Experiment Approach
Rui Xiong et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2013)
Current research trends and prospects among the various materials and designs used in lithium-based batteries
Ralf Wagner et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2013)
Perspective of electronic waste management in China based on a legislation comparison between China and the EU
Xianlai Zeng et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Electrochemical investigation of an artificial solid electrolyte interface for improving the cycle-ability of lithium ion batteries using an atomic layer deposition on a graphite electrode
Hsin-Yi Wang et al.
JOURNAL OF POWER SOURCES (2013)
Micromechanisms of solid electrolyte interphase formation on electrochemically cycled graphite electrodes in lithium-ion cells
Sandeep Bhattacharya et al.
CARBON (2012)
High shear mixers: A review of typical applications and studies on power draw, flow pattern, energy dissipation and transfer properties
Jinli Zhang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2012)
Influence of plug-in hybrid electric vehicle charging strategies on charging and battery degradation costs
Benedikt Lunz et al.
ENERGY POLICY (2012)
Impact of Periodic Current Pulses on Li-Ion Battery Performance
Francois Savoye et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)
Behavior and state-of-health monitoring of Li-ion batteries using impedence spectroscopy and recurrent neural networks
Akram Eddahech et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2012)
Lithium ion battery production
Antti Vayrynen et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2012)
Organic oxalate as leachant and precipitant for the recovery of valuable metals from spent lithium-ion batteries
Liang Sun et al.
WASTE MANAGEMENT (2012)
Electrochemistry and safety of Li4Ti5O12 and graphite anodes paired with LiMn2O4 for hybrid electric vehicle Li-ion battery applications
Ilias Belharouak et al.
JOURNAL OF POWER SOURCES (2011)
Cycling degradation of an automotive LiFePO4 lithium-ion battery
Yancheng Zhang et al.
JOURNAL OF POWER SOURCES (2011)
Safe and fast-charging Li-ion battery with long shelf life for power applications
K. Zaghib et al.
JOURNAL OF POWER SOURCES (2011)
How are WEEE doing? A global review of the management of electrical and electronic wastes
F. O. Ongondo et al.
WASTE MANAGEMENT (2011)
Flue gas desulfurization by citrate process and optimization of working parameters
L. Akyalcin et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2010)
A Bode Plot Characterization of All Stabilizing Controllers
L. H. Keel et al.
IEEE TRANSACTIONS ON AUTOMATIC CONTROL (2010)
Life verification of large capacity Yardney Li-ion cells and batteries in support of NASA missions
Marshall C. Smart et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2010)
Lithium-Ion Battery State of Charge and Critical Surface Charge Estimation Using an Electrochemical Model-Based Extended Kalman Filter
Domenico Di Domenico et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2010)
Lithium batteries: Status, prospects and future
Bruno Scrosati et al.
JOURNAL OF POWER SOURCES (2010)
Aging Mechanisms of LiFePO4 Batteries Deduced by Electrochemical and Structural Analyses
Ping Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Frequency and Temporal Identification of a Li-ion Polymer Battery Model Using Fractional Impedance
M. Montaru et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2010)
Global trends and environmental issues in nickel mining: Sulfides versus laterites
Gavin M. Mudd
ORE GEOLOGY REVIEWS (2010)
Nano Li4Ti5O12-LiMn2O4 batteries with high power capability and improved cycle-life
Aurelien Du Pasquier et al.
JOURNAL OF POWER SOURCES (2009)
Multimodal Physics-Based Aging Model for Life Prediction of Li-Ion Batteries
M. Safari et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Reverse logistics in the electronic industry of China: a case study
Kwok Hung Lau et al.
SUPPLY CHAIN MANAGEMENT-AN INTERNATIONAL JOURNAL (2009)
Kinetic behavior of LiFePO4/C cathode material for lithium-ion batteries
Fei Gao et al.
ELECTROCHIMICA ACTA (2008)
Kinetic study on Li2.8(V0.9Ge0.1)2(PO4)3 by EIS measurement
Su-Qin Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Statistical methodology for predicting the life of lithium-ion cells via accelerated degradation testing
E. V. Thomas et al.
JOURNAL OF POWER SOURCES (2008)
Optimal disassembly sequencing strategy using constraint programming approach
Xavier Zwingmann et al.
JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING (2008)
Disassembly sequence generation in recycling based on parts accessibility and end-of-life strategy
J. Dong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Ab initio studies of structural and electronic properties of Li4Ti5O12 spinel
C. Y. Ouyang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2007)
Use of selected waste materials in concrete mixes
Malek Batayneh et al.
WASTE MANAGEMENT (2007)
Functional electrolytes: Novel type additives for cathode materials, providing high cycleability performance
K Abe et al.
JOURNAL OF POWER SOURCES (2006)
Characterizing aging effects of lithium ion batteries by impedance spectroscopy
U Tröltzsch et al.
ELECTROCHIMICA ACTA (2006)
Ageing mechanisms in lithium-ion batteries
J Vetter et al.
JOURNAL OF POWER SOURCES (2005)
Modeling capacity fade in lithium-ion cells
BY Liaw et al.
JOURNAL OF POWER SOURCES (2005)
Survey of multi-objective optimization methods for engineering
RT Marler et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2004)
Quick testing of batteries in lithium-ion battery packs with impedance-measuring technology
K Takeno et al.
JOURNAL OF POWER SOURCES (2004)
The first cycle characteristics of Li[Ni1/3Co1/3Mn1/3]O2 charged up to 4.7 V
JM Kim et al.
ELECTROCHIMICA ACTA (2004)
A fast formation process for lithium batteries
HH Lee et al.
JOURNAL OF POWER SOURCES (2004)
Case study of a printed-wire-board concerning (Re-)Design for environment
M Brandsotter et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2004)
Evaluation of disassemblability to enable design for disassembly in mass production
A Desai et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2003)
Accelerated calendar and pulse life analysis of lithium-ion cells
RG Jungst et al.
JOURNAL OF POWER SOURCES (2003)
Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
KM Shaju et al.
ELECTROCHIMICA ACTA (2002)
Advances in the recovering of spent lithium battery compounds
S Castillo et al.
JOURNAL OF POWER SOURCES (2002)
Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature
J Shim et al.
JOURNAL OF POWER SOURCES (2002)
Review of Nonlinear Mixed-Integer and Disjunctive Programming Techniques
Ignacio E. Grossmann
OPTIMIZATION AND ENGINEERING (2002)
Preparation of LiCoO2 from spent lithium-ion batteries
CK Lee et al.
JOURNAL OF POWER SOURCES (2002)
The effects of pulse charging on cycling characteristics of commercial lithium-ion batteries
J Li et al.
JOURNAL OF POWER SOURCES (2001)
Development of long life lithium ion battery for power storage
M Majima et al.
JOURNAL OF POWER SOURCES (2001)
Aging mechanism in Li ion cells and calendar life predictions
M Broussely et al.
JOURNAL OF POWER SOURCES (2001)
Cycle life estimation of lithium secondary battery by extrapolation method and accelerated aging test
K Takei et al.
JOURNAL OF POWER SOURCES (2001)
Kinetic characterization of single particles of LiCoO2 by AC impedance and potential step methods
K Dokko et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)
A laboratory-scale lithium-ion battery recycling process
M Contestabile et al.
JOURNAL OF POWER SOURCES (2001)
Parallel disassembly sequencing with sequence-dependent operation times
JG Kang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
A review of state-of-charge indication of batteries by means of a.c. impedance measurements
S Rodrigues et al.
JOURNAL OF POWER SOURCES (2000)