4.7 Article

A reduced-order modeling of a tubular solar reactor for long duration thermochemical energy storage

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Coalitional model predictive control of parabolic-trough solar collector fields with population-dynamics assistance

Ana Sanchez-Amores et al.

Summary: This paper proposes a novel coalitional control approach for large-scale parabolic-trough solar collector fields. The approach splits the field into smaller subsystems, each governed by a local controller. Controllers are clustered into coalitions to solve local optimization problems, achieving an approximate solution to the centralized problem in a decentralized manner. A population-dynamics-assisted resource allocation strategy is proposed to decouple the optimization problems of the coalitions, reducing computational burden while ensuring operational constraints and overall performance.

APPLIED ENERGY (2023)

Article Energy & Fuels

Thermochemical reduction modeling in a high-temperature moving-bed reactor for energy storage: 1D model

Wei Huang et al.

Summary: Efficient high-temperature thermochemical reactors along with optimal operating conditions are crucial for achieving high-efficiency long-term solar energy storage. Computational modeling, coupled with experimental validation, is utilized to investigate the thermal reduction of metal oxide materials and enhance energy conversion efficiency in thermal reactors.

APPLIED ENERGY (2022)

Article Energy & Fuels

A Forward Feedback Control Scheme for a Solar Thermochemical Moving Bed Counter-Current Flow Reactor

Assaad Al Sahlani et al.

Summary: This paper presents a low-order physical model to simulate the dynamic response of temperature inside a tubular plug-flow reactor prototype. Through validation and simulation experiments, the results show that the system response can be efficiently controlled using control parameters, and the designed feedback control model can successfully track different reference reactor temperatures and eliminate overshoot within a reasonable settling time. This study provides a reference for the development of hybrid reactors.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2022)

Article Thermodynamics

A Simplified Numerical Approach to Characterize the Thermal Response of a Moving Bed Solar Reactor

Assaad Al Sahlani et al.

Summary: The study presents a heat transfer model of a tubular plug-flow reactor for solar fuel production, validated using experimental data and applied for simulations under various gas flow rates and temperatures. The simulation results showed good agreement with experimental results with a maximum steady state error of less than 6%, demonstrating the accuracy and reliability of the model for controlling temperature inside plug-flow reactors in thermochemical energy storage applications.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2022)

Article Energy & Fuels

A continuum model for heat and mass transfer in moving-bed reactors for thermochemical energy storage

David Korba et al.

Summary: In this study, a continuum heat and mass transfer model was developed for stationary packed-bed and counter-flow moving-bed reactors. The model was validated and compared with a previous 1D model. The results show that capturing the radial variation is critical in reactor modeling, and the 2D model demonstrates improved agreement with experiments.

APPLIED ENERGY (2022)

Article Thermodynamics

Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation

Xueling Li et al.

Summary: This study proposes a cavity receiver enhanced with a transparent aerogel, which can significantly reduce heat loss and improve efficiency. However, the effectiveness of the aerogel decreases as the intercepted solar radiation energy increases.

ENERGY (2022)

Review Green & Sustainable Science & Technology

Thickening and gelling agents for formulation of thermal energy storage materials - A critical review

L. Cong et al.

Summary: Thermal energy storage (TES) is an effective approach for addressing energy supply and demand mismatches, and utilizing renewable energy sources. This paper provides a comprehensive review on the application of thickening and gelling agents in TES, and discusses their impact on the physical properties of different fluids.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Energy & Fuels

Discrete particle modelling of buoyant convective particle-laden air flow in solar cavity free-falling particle receivers

Sahan Trushad Wickramasooriya Kuruneru et al.

Summary: A numerical model combining computational fluid dynamics and discrete particle method is used to systematically analyze heat losses from a solar cavity particle receiver. The study uncovers the convective heat transfer mechanisms of the receiver while considering the influence of entrained air, air recirculation patterns, and solid-gas thermal dynamics. The results show that particle mass flow rates significantly affect the air recirculation patterns, entrained air, and heat fluxes of the solar receiver.

ENERGY REPORTS (2022)

Article Engineering, Environmental

Thermal reduction of iron-manganese oxide particles in a high-temperature packed-bed solar thermochemical reactor

Bo Wang et al.

Summary: The reduction of iron-manganese oxide particles in a high-temperature packed-bed solar thermochemical reactor was investigated using an advanced transient three-dimensional heat and mass transfer model. The validated model showed that uniform temperature distribution in the reactive packed particles is achieved and the instantaneous peak solar-to-chemical energy efficiency reaches 9.3%.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Dense upflow fluidized bed (DUFB) solar receivers of high aspect ratio: Different fluidization modes through inserting bubble rupture promoters

Yimin Deng et al.

Summary: A fluidized bed using Geldart-A particles is suggested for heat transfer in solar towers. Experimental results show that the presence of bubble rupture promoters can improve the fluidization structure, reduce slugging, and enhance heat transfer efficiency.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Fluidized bed reactor for thermochemical heat storage using Ca(OH)2/CaO to absorb the fluctuations of electric power supplied by variable renewable energy sources: A dynamic model

Takayuki Uchino et al.

Summary: A simplified dynamic model for a Ca(OH)(2)/CaO-containing fluidized bed reactor was developed, with assessment of its performance using nitrogen or steam as the fluidizing gas. The study showed that thermochemical heat storage can improve efficiency by absorbing fluctuations from variable renewable energy.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Thermodynamics

Numerical study on gravity-driven granular flow around tube out-wall: Effect of tube inclination on the heat transfer

Zhigang Guo et al.

Summary: This study investigated the effect of tube inclination on heat transfer in granular flow moving bed heat exchangers using a discrete element method. It was found that tube inclination can improve heat transfer by increasing the heat transfer area, but uncertainties exist in the local heat transfer coefficients. Additionally, different effects were observed at different locations along the tube, with bottom area benefiting from increased heat transfer coefficient and top or middle areas experiencing opposing effects.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Ultra-High Temperature Thermal Conductivity Measurements of a Reactive Magnesium Manganese Oxide Porous Bed Using a Transient Hot Wire Method

Michael Hayes et al.

Summary: The research found that pelletized magnesium manganese oxide has promising potential for high temperature thermochemical energy storage, with the effective thermal conductivity increasing with temperature. The proposed dual porosity model expresses the effective thermal conductivity as a function of temperature, taking into account radiation heat transfer effects.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Article Thermodynamics

Numerical modelling of radiation absorption in a novel multi-stage free-falling particle receiver

Apurv Kumar et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Engineering, Environmental

A novel autothermal fluidized bed reactor for concentrated solar thermal applications

Claudio Tregambi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Energy & Fuels

Thermochemical energy storage performance of copper oxides: Effect of support materials

Duygu Yilmaz et al.

JOURNAL OF ENERGY STORAGE (2020)

Article Engineering, Chemical

Reduction kinetics for large spherical 2:1 iron-manganese oxide redox materials for thermochemical energy storage

Marziyeh Hamidi et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Article Thermodynamics

The role of sensible heat in a concentrated solar power plant with thermochemical energy storage

Xiaoyi Chen et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Thermodynamics

Numerical and experimental investigation of heat transfer in a solar receiver with a variable aperture

Mostafa Abuseada et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Review Green & Sustainable Science & Technology

A comprehensive review on solid particle receivers of concentrated solar power

Kaijun Jiang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Energy & Fuels

Magnesium-manganese oxides for high temperature thermochemical energy storage

Kelvin Randhir et al.

JOURNAL OF ENERGY STORAGE (2019)

Article Energy & Fuels

Enhancing thermochemical energy storage density of magnesium-manganese oxides

Keith King et al.

ENERGY STORAGE (2019)

Article Chemistry, Physical

Revisiting the BaO2/BaO redox cycle for solar thermochemical energy storage

A. J. Carrillo et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Article Thermodynamics

A conductive heat transfer model for particle flows over immersed surfaces

A. B. Morris et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Proceedings Paper Energy & Fuels

Thermal performance of a quartz tube solid particle air receiver

F. Bai et al.

PROCEEDINGS OF THE SOLARPACES 2013 INTERNATIONAL CONFERENCE (2014)

Review Green & Sustainable Science & Technology

A review of potential materials for thermal energy storage in building applications

Parfait Tatsidjodoung et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Thermodynamics

Light tracing analysis of a new kind of trough solar concentrator

Zheng Hongfei et al.

ENERGY CONVERSION AND MANAGEMENT (2011)

Article Engineering, Chemical

Heat transfer of gas flow through a packed bed

DS Wen et al.

CHEMICAL ENGINEERING SCIENCE (2006)