4.7 Article

Darcy-Forchheimer hybrid nanofluid flow over the rotating Riga disk in the presence of chemical reaction: Artificial neural network approach

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Nuclear reactor application on Jeffrey fluid flow with Falkner-skan factor, Brownian and thermophoresis, non linear thermal radiation impacts past a wedge

G. Dharmaiah et al.

Summary: This paper investigates the impact of non-linear thermal radiation, Brownian motion, and thermophoresis on an MHD through a wedge for Jeffrey fluid. The study also includes heat transport analysis. The originality of this work lies in the formulation of the Jeffrey fluid, as well as the consideration of nonlinear thermal radiation, Brownian motion, and thermophoresis. Using boundary layer approximations and similarity transformations, the governing equations are transformed into ordinary differential form. The outcomes of velocity, concentration, and temperature fields are determined using the BVP4C numerical method, and the results are analyzed graphically and tabularly. The comparison with previously published data shows a good agreement. The research mainly focuses on modeling flow in a nuclear reactor, where the boundary layer flow caused by a wedge surface is crucial for geothermal and heat exchanger systems.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2023)

Article Mathematics, Applied

Numerical analysis of generalized Fourier's and Fick's laws for micropolar Carreaufluid over a vertical stretching Riga sheet

Nadeem Abbas et al.

Summary: The present study focuses on the analysis of the Micropolar Carreaufluid model over a vertical Riga sheet using the Cattaneo-Christov heat flux theory. The partial differential equations are transformed into ordinary differential equations through specific transformations, and a numerical scheme is employed to solve the model. The results reveal that the skin friction increases while the couple stress decreases with the boosting values of the buoyancy ratio term. Both the velocity and temperature functions exhibit consistent behavior with the variations in the dimensionless parameter.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2023)

Article Chemistry, Multidisciplinary

Entropy Generation and Thermal Radiation Analysis of EMHD Jeffrey Nanofluid Flow: Applications in Solar Energy

Bhupendra Kumar Sharma et al.

Summary: This article investigates the effects of entropy generation, heat transmission, and mass transfer on the flow of a Jeffrey fluid under the influence of solar radiation in the presence of copper nanoparticles and gyrotactic microorganisms. A numerical model for a parabolic trough solar collector (PTSC) installed on a solar plate is developed, and the impacts of various parameters on the flow properties are discussed graphically.

NANOMATERIALS (2023)

Article Physics, Applied

Theoretical analysis of modified non-Newtonian micropolar nanofluid flow over vertical Riga sheet

Nadeem Abbas et al.

Summary: The main objective of this work is to investigate the steady incompressible second-grade micropolar fluid flow over a nonlinear vertical stretching Riga sheet. Slip velocity, zero mass flux, Lorentz forces, thermophoresis, Brownian motion, heat generation, and buoyancy forces are considered in the mathematical model. The model is solved numerically to analyze the variations in the movement, thermal distribution, and concentration distribution of the nanofluid. The results show different profiles and distributions for injection and suction cases, which are validated with existing literature.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2023)

Article Physics, Multidisciplinary

Significance of EMHD graphene oxide (GO) water ethylene glycol nanofluid flow in a Darcy-Forchheimer medium by machine learning algorithm

Anum Shafiq et al.

Summary: The low heat efficiency of base fluids is addressed by utilizing tiny-sized metal solid material inside the base fluids. This study uses a machine learning algorithm to investigate the thermal application of graphene oxide water/ethylene glycol-based nanofluids under electromagnetohydrodynamic and Darcy-Forchheimer medium. The skin friction coefficient and Nusselt parameter were simulated and artificial neural networks were developed based on the findings to accurately predict these parameters.

EUROPEAN PHYSICAL JOURNAL PLUS (2023)

Article Thermodynamics

Ramped heating in CNTS fractional nanofluids

Ilyas Khan

Case Studies in Thermal Engineering (2023)

Article Multidisciplinary Sciences

Heat and mass transfer of generalized fourier and Fick?s law for second-grade fluid flow at slendering vertical Riga sheet

Wasfi Shatanawi et al.

Summary: In this analysis, the generalized Fourier and Fick's law for Second-grade fluid flow at a slendering vertical Riga sheet is examined along with the effects of thermophoresis and Brownian motion. Boundary layer approximations are used to build the mathematical model, and the Lie symmetry method is applied to transform PDEs into ODEs. The impact of significant physical parameters is interpreted using graphs and tables, showing the decline or increase in temperature and concentration functions due to the changes in thermophoresis and Brownian motion parameters.

HELIYON (2023)

Article Biophysics

Hemodynamical analysis of MHD two phase blood flow through a curved permeable artery having variable viscosity with heat and mass transfer

B. K. Sharma et al.

Summary: This study investigates MHD blood flow through a stenosed permeable curved artery using numerical simulations. The results suggest that the curvature and permeability of the arterial wall increase the risk of atherosclerosis formation, while the presence of a heat source in the blood flow lowers this risk.

BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2022)

Article Engineering, Mechanical

Modeling and analysis of magnetic hybrid nanoparticle (Au-Al2O3/blood) based drug delivery through a bell-shaped occluded artery with joule heating, viscous dissipation and variable viscosity effects

Rishu Gandhi et al.

Summary: This study investigates the impact of hybrid nanoparticles on the blood flow pattern in a porous artery with stenosis. Factors such as magnetic field, Joule heating, and viscosity are considered, and a temperature-dependent viscosity model is utilized. Results show that the hybrid nanoparticles effectively reduce resistance and wall shear stress in the artery, highlighting their potential applications in treating diseases such as atherosclerosis.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Article Thermodynamics

MHD flow of MgO-Ag/water hybrid nanofluid past a moving slim needle considering dual solutions: an applicable model for hot-wire anemometer analysis

Saeed Dinarvand et al.

Summary: This study investigates the steady laminar magnetohydrodynamics flow of a magnesium oxide-silver/water hybrid nanofluid along a horizontal slim needle with thermal radiation, considering dual solutions. The results show that the magnetic parameter and the second nanoparticle's mass limit the range of the velocity ratio parameter for which the solution exists, and the magnetic parameter leads to a decrease in engineering quantities of interest.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Article Thermodynamics

Darcy-Forchheimer up/downflow of entropy optimized radiative nanofluids with second-order slip, nonuniform source/sink, and shape effects

Sudhanshu Shekhar Samantaray et al.

Summary: This study investigates the influence of different shapes of carbon nanotube particles on the flow of nanofluids past a thin needle, revealing that the shape of nanoparticles affects fluid velocity and heat transfer rate, with brick-shaped particles causing a reverse change in fluid velocity and increasing surface viscous drag.

HEAT TRANSFER (2022)

Article Physics, Multidisciplinary

Mass-based hybrid nanofluid model for entropy generation analysis of flow upon a convectively-warmed moving wedge

Hamza Berrehal et al.

Summary: This research numerically studies the flow of a steady incompressible laminar two-dimensional hybrid nanofluid upon a convectively-warmed moving wedge with radiative transition. The study investigates the effect of governing parameters on variables such as fluid velocity, temperature distribution, skin friction coefficient, Nusselt number, entropy generation, and Bejan number. The use of a mass-based method in combination with entropy generation analysis for hybrid nanofluid flow and heat transfer is a significant achievement of this research.

CHINESE JOURNAL OF PHYSICS (2022)

Article Thermodynamics

Numerical computation for entropy generation in Darcy-Forchheimer transport of hybrid nanofluids with Cattaneo-Christov double-diffusion

Manoj Kumar Nayak et al.

Summary: This study investigates the effects of Cattaneo-Christov double diffusion, multiple slips, and Darcy-Forchheimer on entropy optimized and thermally radiative flow, thermal and mass transport of hybrid nanoliquids past a stretched cylinder. The research presents a model featuring the Casson fluid model and Darcy-Forchheimer model, and uses numerical methods to analyze the results, showing that curvature parameters affect fluid velocity, and other parameters have varying effects on temperature and solutal field distribution.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Article Thermodynamics

Numerical study of heat transfer in hybrid nanofluid flow over permeable nonlinear stretching curved surface with thermal slip

Nadeem Abbas et al.

Summary: This study examines the flow of a hybrid nanofluid past a permeable curved surface with nonlinear stretching, considering two types of particles and a porous medium. Mathematical models based on the Navier-Stokes equations are developed and transformed into a system of nonlinear ordinary differential equations. The effects of physical parameters on velocity and temperature profiles are analyzed using numerical methods. The study compares the heat transfer scale of the hybrid nanofluid to that of a simple nanofluid, considering suction and injection cases.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Multidisciplinary Sciences

Reliability Analysis Based on Mixture of Lindley Distributions with Artificial Neural Network

Anum Shafiq et al.

Summary: The study focuses on reliability analysis of mixture models using artificial neural networks and investigates the influence of pertinent parameters on reliability metrics. The outcomes demonstrate that neural networks are a powerful and effective mathematical tool that can be used in the reliability analysis of mixing models.

ADVANCED THEORY AND SIMULATIONS (2022)

Review Nanoscience & Nanotechnology

Review on Nano-Fluids Applications and Heat Transfer Enhancement Techniques in Different Enclosures

F. Mebarek-Oudina et al.

Summary: This review discusses the use of magnetic fields, porous media, and Nano-fluids in solar thermal applications, as well as the impact of complex shaped cavities on heat transfer. The findings show that these techniques and geometrical parameters can significantly enhance convective flows, with trapezoidal geometries showing the most promising results.

JOURNAL OF NANOFLUIDS (2022)

Article Nanoscience & Nanotechnology

Aqua Cobalt Ferrite/Mn-Zn Ferrite Hybrid Nanofluid Flow Over a Nonlinearly Stretching Permeable Sheet in a Porous Medium

Mahdi Mansourian et al.

Summary: This article investigates the flow of ferro hybrid nanofluid over a nonlinearly stretching permeable sheet in a porous medium, analyzing the hydrodynamics and thermal boundary layers as well as skin friction and heat transfer. The study shows that both Nusselt number and skin friction coefficient decrease with increasing magnetic field.

JOURNAL OF NANOFLUIDS (2022)

Article Materials Science, Multidisciplinary

Numerical analysis of magnetic hybrid Nano-fluid natural convective flow in an adjusted porous trapezoidal enclosure

I. Chabani et al.

Summary: This research paper numerically investigates the laminar flow of nano-fluid and the impact of its thermo-physical characteristics on convective heat transfer. It finds that increasing the Rayleigh number, Darcy number, and volume fraction of the hybrid nano-fluid can improve thermal transfer, while decreasing the Hartmann number is recommended. Additionally, the study evaluates the geometric features of the enclosure and suggests that decreasing the aspect ratio, reducing the undulation number of the wall, and increasing the inclination angle of the side walls are crucial for enhancing thermal efficiency and heat transmission.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2022)

Article Chemistry, Physical

Computational biomedical simulations of hybrid nanoparticles (Au-Al2O3/blood-mediated) transport in a stenosed and aneurysmal curved artery with heat and mass transfer: Hematocrit dependent viscosity approach

Poonam et al.

Summary: This study analyzed the effects of hybrid nanoparticles on the hemodynamics of unsteady blood flow in a curved artery with stenosis and aneurysm. The results showed that the volume fraction of gold nanoparticles increased the velocity profile, while the volume fraction of aluminum oxide nanoparticles had the opposite effect. The study also found that hybrid nanoparticles could help control blood velocity and temperature. These findings have implications for the diagnosis and treatment of cardiovascular disorders, as well as other pathological conditions.

CHEMICAL PHYSICS LETTERS (2022)

Article Energy & Fuels

Prabhakar fractional derivative model of sodium alginate (C6H9NaO7) for accelerated plate motions

Ilyas Khan

Summary: This study investigates the thermal transport of sodium alginate (C6H9NaO7) over a vertical plate with a constant temperature by developing a Prabhakar fractional derivative model. The fractional model proves to be advantageous in analyzing the physical impact of flow variables with memory effects. The effects and behavior of significant physical parameters and fractional order parameters are studied graphically and discussed.

FRONTIERS IN ENERGY RESEARCH (2022)

Article Materials Science, Multidisciplinary

Comparative study of artificial neural network versus parametric method in COVID-19 data analysis

Anum Shafiq et al.

Summary: A new coronavirus, COVID-19, has become a major global problem in the past two years. This study developed an application using artificial neural network modeling and maximum likelihood estimation to estimate the COVID-19 mortality rates in Italy, demonstrating the high reliability of the models.

RESULTS IN PHYSICS (2022)

Article Chemistry, Multidisciplinary

Computational Assessment of Microrotation and Buoyancy Effects on the Stagnation Point Flow of Carreau-Yasuda Hybrid Nanofluid with Chemical Reaction Past a Convectively Heated Riga Plate

Muhammad Ramzan et al.

Summary: This study investigates the effect of thermal radiation and viscous dissipation on the convectively heated flow of a micropolar Carreau-Yasuda hybrid nanoliquid in porous media. The results provide insights into the velocity, microrotation, energy, and mass transport of the hybrid nanofluid under different flow parameters.

ACS OMEGA (2022)

Article Physics, Applied

Second-grade nanofluid flow above a vertical slandering Riga surface with double diffusion model

Sohail Nadeem et al.

Summary: This study focuses on the flow of second-grade nanofluid passing through a stretchable vertical Riga surface of variable thickness, considering thermal conductivity and viscosity as variables affected by temperature, as well as including thermophoresis and Brownian motion for heat transfer effects. The results obtained using the MATLAB package with bvp4c technique show how different parameters impact the flow behavior and heat transfer of the fluid.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2022)

Article Chemistry, Multidisciplinary

Hydrothermal stagnation point flow of Carreau nanofluid over a moving thin needle with non-linear Navier?s slip and cubic autocatalytic chemical reactions in Darcy-Forchheimer medium

S. K. Sahu et al.

Summary: The present analysis focuses on the hydrothermal and stagnation point flow of a non-Newtonian fluid over a moving thin needle. The study provides important insights into complex industrial processes.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

Article Physics, Multidisciplinary

Effects of heat transfer, body acceleration and hybrid nanoparticles (Au-Al2O3) on MHD blood flow through a curved artery with stenosis and aneurysm using hematocrit-dependent viscosity

Bhupendra Kumar Sharma et al.

Summary: This study investigates the effects of heat transfer and body acceleration on unsteady MHD blood flow through a curved artery with stenosis and aneurysm using hybrid nanoparticles. The results show that the velocity profile increases with the volume fraction of gold nanoparticles and decreases with the volume fraction of aluminium oxide nanoparticles. The resistive impedance is higher for curved arteries compared to straight arteries. This research has implications for the diagnosis and treatment of various diseases and the design of biomedical devices.

WAVES IN RANDOM AND COMPLEX MEDIA (2022)

Article Multidisciplinary Sciences

Entropy generation minimization of higher-order endothermic/exothermic chemical reaction with activation energy on MHD mixed convective flow over a stretching surface

B. K. Sharma et al.

Summary: The present investigation aims to analyze higher-order endothermic/exothermic chemical reactions with activation energy by considering thermophoresis and Brownian motion effects on MHD mixed convective flow across a vertical stretching surface. The effects of various physical parameters on the velocity, temperature, and concentration profiles are analyzed. The numerical findings are in good agreement with the previously published results. The study provides insights into the behavior of chemical reactions and flow characteristics in industrial and technical processes.

SCIENTIFIC REPORTS (2022)

Article Physics, Multidisciplinary

The flow of magnetised convective Casson liquid via a porous channel with shrinking and stationary walls

J. Raza et al.

Summary: Non-Newtonian fluids have numerous applications in technological development and improvement, but they are difficult to handle compared to Newtonian fluids. This study numerically investigates the flow of mixed and convective Casson liquid through a duct under the Lorentz force effect. The results provide insights into the influence of various parameters on the flow characteristics.

PRAMANA-JOURNAL OF PHYSICS (2022)

Article Physics, Multidisciplinary

Flow of aqueous Fe2O3-CuO hybrid nanofluid over a permeable stretching/shrinking wedge: A development on Falkner-Skan problem

Mohammad Izady et al.

Summary: This study investigates the two-dimensional boundary layer flow of a Fe2O3-CuO/water hybrid nanofluid over a porous stretching/shrinking wedge with radiation and MHD effects semi-analytically. Dual solutions exist for a certain parameter domain and the first solutions have thinner boundary layer thickness. The magnetic parameter and mass suction at the wedge's surface increase the local Nusselt number, while the second nanoparticle's mass enhancement amplifies the skin friction coefficient and local Nusselt number for the first solutions.

CHINESE JOURNAL OF PHYSICS (2021)

Article Computer Science, Interdisciplinary Applications

Designing artificial neural network of nanoparticle diameter and solid-fluid interfacial layer on single-walled carbon nanotubes/ethylene glycol nanofluid flow on thin slendering needles

Anum Shafiq et al.

Summary: In this study, an artificial neural network was developed to predict the boundary layer flow of a single-walled carbon nanotubes nanofluid towards three different nonlinear thin isothermal needles. The ANN models showed high accuracy in predicting Nusselt number and skin friction coefficient values, with calculated R values of 0.9999, indicating excellent prediction performance.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2021)

Article Chemistry, Physical

Neuro-intelligent mappings of hybrid hydro-nanofluid Al2O3-Cu-H2O model in porous medium over rotating disk with viscous dissolution and Joule heating

Hira Ilyas et al.

Summary: The study aims to investigate mass and heat transfer phenomena in a hybrid hydronanofluidic system involving Al2O3-Cu-H2O over a rotating disk in a porous medium with viscous dissolution and Joule heating. The neural networks mapping is utilized to estimate solutions of various scenarios with different physical constraints values.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Multidisciplinary Sciences

Estimation of unsteady hydromagnetic Williamson fluid flow in a radiative surface through numerical and artificial neural network modeling

Anum Shafiq et al.

Summary: The study presents a novel implementation of intelligent numerical computing solver based on artificial neural network algorithms to interpret heat generation in unsteady conducting Williamson liquid flow. By transforming nonlinear PDEs into ODEs and generating a data set for MLP-ANN, the model can accurately predict SFC and NN values with high precision.

SCIENTIFIC REPORTS (2021)

Article Thermodynamics

Heat transport and stagnation-point flow of magnetized nanoliquid with variable thermal conductivity, Brownian moment, and thermophoresis aspects

Kharabela Swain et al.

Summary: The study proposes a numerical analysis of the flow and heat transport of nanoliquids with variable thermal conductivity near an extendable surface under the influence of a magnetic field. The attributes of nanoliquids explain Brownian motion and thermophoresis diffusion, positively affecting the thermal field.

HEAT TRANSFER (2021)

Article Thermodynamics

3D mixed convection MHD flow of GO-MoS2 hybrid nanoparticles in H2O-(CH2OH)2 hybrid base fluid under the effect of H2 bond

S. S. Ghadikoiaei et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Engineering, Mechanical

Three-dimensional squeezed flow of aqueous magnetite-graphene oxide hybrid nanofluid: A novel hybridity model with analysis of shape factor effects

Saeed Dinarvand et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2020)

Article Engineering, Chemical

Natural convection MHD flow due to MoS2-Ag nanoparticles suspended in C2H6O2-H2O hybrid base fluid with thermal radiation

S. S. Ghadikolaei et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)

Article Chemistry, Physical

Fe3O4-(CH2OH)2 nanofluid analysis in a porous medium under MHD radiative boundary layer and dusty fluid

S. S. Ghadikolaei et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Article Thermodynamics

Analytical and numerical solution of non-Newtonian second-grade fluid flow on a stretching sheet

S. S. Ghadikolaei et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

Article Thermodynamics

MHD nanofluid flow over a rotating disk with partial slip effects: Buongiorno model

M. Mustafa

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

On Darcy-Forchheimer flow of carbon nanotubes due to a rotating disk

Tasawar Hayat et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)