Related references
Note: Only part of the references are listed.3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals
Dolores R. Serrano et al.
PHARMACEUTICS (2023)
Patient-Specific 3D-Printed Low-Cost Models in Medical Education and Clinical Practice
Zhonghua Sun et al.
MICROMACHINES (2023)
Design of a 3D printed coronary artery model for CT optimization
S. D. Morup et al.
RADIOGRAPHY (2022)
Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study
R. Kaufmann et al.
JOURNAL OF DIGITAL IMAGING (2022)
Bioprinted microvasculature: progressing from structure to function
Alexis J. Seymour et al.
BIOFABRICATION (2022)
A multi-axis robot-based bioprinting system supporting natural cell function preservation and cardiac tissue fabrication
Zeyu Zhang et al.
BIOACTIVE MATERIALS (2022)
Programming Cellular Alignment in Engineered Cardiac Tissue via Bioprinting Anisotropic Organ Building Blocks
John H. Ahrens et al.
ADVANCED MATERIALS (2022)
Perfusion-distention fixation of heart specimens: a key step in immortalizing heart specimens for wax infiltration and generating 3D imaging data sets for reconstruction and printed 3D models
Takato Yamasaki et al.
CARDIOVASCULAR PATHOLOGY (2022)
Nanofiber electrospinning combined with rotary bioprinting for fabricating small-diameter vessels with endothelium and smooth muscle
Qianheng Jin et al.
COMPOSITES PART B-ENGINEERING (2022)
Incorporating nanocrystalline cellulose into a multifunctional hydrogel for heart valve tissue engineering applications
Nianfang Ma et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2022)
Three-Dimensional Printing of Patient-Specific Heart Valves: Separating Facts From Fiction and Myth From Reality
Syed Hamza Mufarrih et al.
JOURNAL OF CARDIOTHORACIC AND VASCULAR ANESTHESIA (2022)
Progress in Bioengineering Strategies for Heart Regenerative Medicine
Timm Haneke et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)
The Role of 3D Printing in Planning Complex Medical Procedures and Training of Medical Professionals-Cross-Sectional Multispecialty Review
Jaroslaw Meyer-Szary et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)
A Change of Heart: Human Cardiac Tissue Engineering as a Platform for Drug Development
Samantha B. Bremner et al.
CURRENT CARDIOLOGY REPORTS (2022)
Opportunities and challenges in cardiac tissue engineering from an analysis of two decades of advances
Richard Z. Zhuang et al.
NATURE BIOMEDICAL ENGINEERING (2022)
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Pooja Jain et al.
BIOMATERIALS (2022)
Advances in three-dimensional bioprinted stem cell-based tissue engineering for cardiovascular regeneration
Astha Khanna et al.
JOURNAL OF MOLECULAR AND CELLULAR CARDIOLOGY (2022)
A microfluidic approach to fabricate sucrose decorated liposomes with increased uptake in breast cancer cells
Shiva Khorshid et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2022)
3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine
Zhonghua Sun et al.
MICROMACHINES (2022)
3D coaxial bioprinting: process mechanisms, bioinks and applications
Tarun Shyam Mohan et al.
PROGRESS IN BIOMEDICAL ENGINEERING (2022)
Clinical 3D modeling to guide pediatric cardiothoracic surgery and intervention using 3D printed anatomic models, computer aided design and virtual reality
Reena M. Ghosh et al.
3D PRINTING IN MEDICINE (2022)
Ten year follow-up of high-risk patients treated during the early experience with transcatheter aortic valve replacement
Janarthanan Sathananthan et al.
CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS (2021)
Affordable Three-Dimensional Printed Heart Models
Gorka Gomez-Ciriza et al.
FRONTIERS IN CARDIOVASCULAR MEDICINE (2021)
3D bioprinting of stem cell-laden cardiac patch: A promising alternative for myocardial repair
Sanskrita Das et al.
APL BIOENGINEERING (2021)
Progress in cardiovascular bioprinting
Faisal Quadri et al.
ARTIFICIAL ORGANS (2021)
Chitosan hydrogel/silk fibroin/Mg(OH)(2) nanobiocomposite as a novel scaffold with antimicrobial activity and improved mechanical properties
Reza Eivazzadeh-Keihan et al.
SCIENTIFIC REPORTS (2021)
3D Printing and Nanotechnology: A Multiscale Alliance in Personalized Medicine
Juliana dos Santos et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Heart Disease and Stroke Statistics-2021 Update A Report From the American Heart Association
Salim S. Virani et al.
CIRCULATION (2021)
3D Printing in Development of Nanomedicines
Keerti Jain et al.
NANOMATERIALS (2021)
One-Step 3D Printing of Heart Patches with Built-In Electronics for Performance Regulation
Masha Asulin et al.
ADVANCED SCIENCE (2021)
Recent advances in 3D bioprinting of vascularized tissues
Yi Zhang et al.
MATERIALS & DESIGN (2021)
Quantitative Assessment of 3D Printed Model Accuracy in Delineating Congenital Heart Disease
Shenyuan Lee et al.
BIOMOLECULES (2021)
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Jianhua Zhang et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)
Three-Dimensional Virtual and Printed Prototypes in Complex Congenital and Pediatric Cardiac Surgery-A Multidisciplinary Team-Learning Experience
Laszlo Kiraly et al.
BIOMOLECULES (2021)
3D bioprinting of cardiac tissue: current challenges and perspectives
Brian Kato et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2021)
Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration
Nanbo Liu et al.
BIOACTIVE MATERIALS (2021)
Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues
Caner Dikyol et al.
Bioprinting (2021)
Evaluation of the probe burst test as a measure of strength for a biologically-engineered vascular graft
Zeeshan H. Syedain et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Scaffold-based and scaffold-free cardiac constructs for drug testing
Kenichi Arai et al.
BIOFABRICATION (2021)
Recent advancements in the bioprinting of vascular grafts
Faraz Fazal et al.
BIOFABRICATION (2021)
3D Bioprinted Multicellular Vascular Models
Karli A. Gold et al.
ADVANCED HEALTHCARE MATERIALS (2021)
3D-Printed Coronary Plaques to Simulate High Calcification in the Coronary Arteries for Investigation of Blooming Artifacts
Zhonghua Sun et al.
BIOMOLECULES (2021)
Extracellular Matrix-Based Biomaterials for Cardiovascular Tissue Engineering
Astha Khanna et al.
JOURNAL OF CARDIOVASCULAR DEVELOPMENT AND DISEASE (2021)
3D bioprinting in cardiac tissue engineering
Zihan Wang et al.
THERANOSTICS (2021)
A tough act to follow: collagen hydrogel modifications to improve mechanical and growth factor loading capabilities
S. O. Sarrigiannidis et al.
MATERIALS TODAY BIO (2021)
Injectable, self-healing mesoporous silica nanocomposite hydrogels with improved mechanical properties
A. Zengin et al.
NANOSCALE (2021)
Mechanical and finite element evaluation of a bioprinted scaffold following recellularization in a rat subcutaneous model
Christopher Noble et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Heart Disease and Stroke Statistics-2020 Update: A Report From the American Heart Association
Salim S. Virani et al.
CIRCULATION (2020)
Investigation of gelatin methacrylate working curves in dynamic optical projection stereolithography of vascular-like constructs
Srikumar Krishnamoorthy et al.
EUROPEAN POLYMER JOURNAL (2020)
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Kaivalya A. Deo et al.
TISSUE ENGINEERING PART A (2020)
Generating ring-shaped engineered heart tissues from ventricular and atrial human pluripotent stem cell-derived cardiomyocytes
Idit Goldfracht et al.
NATURE COMMUNICATIONS (2020)
In Situ Expansion, Differentiation, and Electromechanical Coupling of Human Cardiac Muscle in a 3D Bioprinted, Chambered Organoid
Molly E. Kupfer et al.
CIRCULATION RESEARCH (2020)
Current challenges in three-dimensional bioprinting heart tissues for cardiac surgery
Christopher D. Roche et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2020)
Drug response analysis for scaffold-free cardiac constructs fabricated using bio-3D printer
Kenichi Arai et al.
Scientific Reports (2020)
Cells, Materials, and Fabrication Processes for Cardiac Tissue Engineering
Pilar Montero et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Vascular bioprinting with enzymatically degradable bioinks via multi-material projection-based stereolithography
Alexander Thomas et al.
ACTA BIOMATERIALIA (2020)
Biomaterials for Bioprinting Microvasculature
Ryan W. Barrs et al.
CHEMICAL REVIEWS (2020)
3D Bioprinting of Oxygenated Cell-Laden Gelatin Methacryloyl Constructs
Ahmet Erdem et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Cardiac MRI: technical basis
Vincenzo Russo et al.
RADIOLOGIA MEDICA (2020)
Degeneration of Bioprosthetic Heart Valves: Update 2020
Alexander E. Kostyunin et al.
JOURNAL OF THE AMERICAN HEART ASSOCIATION (2020)
Clinical Applications of Patient-Specific 3D Printed Models in Cardiovascular Disease: Current Status and Future Directions
Zhonghua Sun
BIOMOLECULES (2020)
Bioprinting small diameter blood vessel constructs with an endothelial and smooth muscle cell bilayer in a single step
Lei Xu et al.
BIOFABRICATION (2020)
Method to simulate distal flow resistance in coronary arteries in 3D printed patient specific coronary models
Kelsey N. Sommer et al.
3D PRINTING IN MEDICINE (2020)
Synchrotron radiation computed tomography assessment of calcified plaques and coronary stenosis with different slice thicknesses and beam energies on 3D printed coronary models
Zhonghua Sun et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Optimization of computed tomography pulmonary angiography protocols using 3D printed model with simulation of pulmonary embolism
Sultan Aldosari et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Patient-specific 3D printed pulmonary artery model with simulation of peripheral pulmonary embolism for developing optimal computed tomography pulmonary angiography protocols
Sultan Aldosari et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Device Sizing Guided by Echocardiography-Based Three-Dimensional Printing Is Associated with Superior Outcome after Percutaneous Left Atrial Appendage Occlusion
Yiting Fan et al.
JOURNAL OF THE AMERICAN SOCIETY OF ECHOCARDIOGRAPHY (2019)
3D Bioprinting of cardiac tissue and cardiac stem cell therapy
Matthew Alonzo et al.
TRANSLATIONAL RESEARCH (2019)
Simulation of Endovascular Aortic Repair Using 3D Printed Abdominal Aortic Aneurysm Model and Fluid Pump
Jussi M. Karkkainen et al.
CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY (2019)
3D bioprinting of collagen to rebuild components of the human heart
A. Lee et al.
SCIENCE (2019)
Cardiac regeneration using human-induced pluripotent stem cell-derived biomaterial-free 3D-bioprinted cardiac patch in vivo
Enoch Yeung et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2019)
Learn from Your Elders: Developmental Biology Lessons to Guide Maturation of Stem Cell-Derived Cardiomyocytes
Silvia Marchiano et al.
PEDIATRIC CARDIOLOGY (2019)
Coaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GeIMA Blend Bioink
Ying Wang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
A Visible Light-Cross-Linkable, Fibrin-Gelatin-Based Bioprinted Construct with Human Cardiomyocytes and Fibroblasts
Shweta Anil Kumar et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Dimensional Accuracy and Clinical Value of 3D Printed Models in Congenital Heart Disease: A Systematic Review and Meta-Analysis
Ivan Wen Wen Lau et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Personalized 3D printed coronary models in coronary stenting
Zhonghua Sun et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
3D printed coronary models offer new opportunities for developing optimal coronary CT angiography protocols in imaging coronary stents
Zhonghua Sun
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Bioprinting Vasculature: Materials, Cells and Emergent Techniques
Clarissa Tomasina et al.
MATERIALS (2019)
Personalized Hydrogels for Engineering Diverse Fully Autologous Tissue Implants
Reuven Edri et al.
ADVANCED MATERIALS (2019)
Left atrial appendage closure guided by 3D computed tomography printing technology: A case control study
Michele Conti et al.
JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY (2019)
Toward Regeneration of the Heart: Bioengineering Strategies for Immunomodulation
Arianna Ferrini et al.
FRONTIERS IN CARDIOVASCULAR MEDICINE (2019)
Bioengineering adult human heart tissue: How close are we?
Richard J. Mills et al.
APL BIOENGINEERING (2019)
Coaxial bioprinting of cell-laden vascular constructs using a gelatin-tyramine bioink
Soyoung Hong et al.
BIOMATERIALS SCIENCE (2019)
3D bioprinted functional and contractile cardiac tissue constructs
Zhan Wang et al.
ACTA BIOMATERIALIA (2018)
Rational design and fabrication of multiphasic soft network composites for tissue engineering articular cartilage: A numerical model-based approach
Onur Bas et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Standardized Definition of Structural Valve Degeneration for Surgical and Transcatheter Bioprosthetic Aortic Valves
Danny Dvir et al.
CIRCULATION (2018)
Three-dimensional printing enhances preparation for repair of double outlet right ventricular surgery
Liyun Zhao et al.
JOURNAL OF CARDIAC SURGERY (2018)
The suture retention test, revisited and revised
M. Pensalfini et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
The root problem of heart valve engineering
Jonathan T. Butcher
SCIENCE TRANSLATIONAL MEDICINE (2018)
Application of 3D printing in the surgical planning of hypertrophic obstructive cardiomyopathy and physician-patient communication: a preliminary study
Hong-Chang Guo et al.
JOURNAL OF THORACIC DISEASE (2018)
Tissue and Organ 3D Bioprinting
Zengmin Xia et al.
SLAS TECHNOLOGY (2018)
3D bioprinting for cardiovascular regeneration and pharmacology
Haitao Cui et al.
ADVANCED DRUG DELIVERY REVIEWS (2018)
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Jan Schoeneberg et al.
SCIENTIFIC REPORTS (2018)
A Bioprinted Cardiac Patch Composed of Cardiac-Specific Extracellular Matrix and Progenitor Cells for Heart Repair
Donald Bejleri et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Common Postoperative Heart Transplant Complications
Samantha Hoy et al.
CRITICAL CARE NURSING QUARTERLY (2018)
Development of an organ-specific insert phantom generated using a 3D printer for investigations of cardiac computed tomography protocols
Kamarul A. Abdullah et al.
JOURNAL OF MEDICAL RADIATION SCIENCES (2018)
3D Printing is a Transformative Technology in Congenital Heart Disease
Shafkat Anwar et al.
JACC-BASIC TO TRANSLATIONAL SCIENCE (2018)
Bioprinting of tissue engineering scaffolds
Patrick Rider et al.
JOURNAL OF TISSUE ENGINEERING (2018)
Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments
Wanjun Liu et al.
BIOFABRICATION (2018)
Optimizing Photo-Encapsulation Viability of Heart Valve Cell Types in 3D Printable Composite Hydrogels
Laura Hockaday Kang et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Mechanical versus bioprosthetic aortic valve replacement
Stuart J. Head et al.
EUROPEAN HEART JOURNAL (2017)
Standardized definitions of structural deterioration and valve failure in assessing long-termdurability of transcatheter and surgical aortic bioprosthetic valves: a consensus statement from the European Association of Percutaneous Cardiovascular Interventions (EAPCI) endorsed by the European Society of Cardiology (ESC) and the European Association for Cardio-Thoracic Surgery (EACTS)
Davide Capodanno et al.
EUROPEAN HEART JOURNAL (2017)
Three-dimensional printed models for surgical planning of complex congenital heart defects: an international multicentre study
Israel Valverde et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2017)
A simulator for training in endovascular aneurysm repair: The use of three dimensional printers
I. O. Torres et al.
EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2017)
Application of 3D printing technology to left atrial appendage occlusion
Huakang Li et al.
INTERNATIONAL JOURNAL OF CARDIOLOGY (2017)
Hands-on surgical training of congenital heart surgery using 3-dimensional print models
Shi-Joon Yoo et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2017)
Cardiac 3D Printing and its Future Directions
Marija Vukicevic et al.
JACC-CARDIOVASCULAR IMAGING (2017)
3D printing for sizing left atrial appendage closure device: head-to-head comparison with computed tomography and transoesophageal echocardiography
Michaela M. Hell et al.
EUROINTERVENTION (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Biomaterial-Free Three-Dimensional Bioprinting of Cardiac Tissue using Human Induced Pluripotent Stem Cell Derived Cardiomyocytes
Chin Siang Ong et al.
SCIENTIFIC REPORTS (2017)
Biomaterial-driven in situ cardiovascular tissue engineering-a multi-disciplinary perspective
Tamar B. Wissing et al.
NPJ REGENERATIVE MEDICINE (2017)
RECENT ADVANCES IN HYDROGELS FOR CARTILAGE TISSUE ENGINEERING
S. L. Vega et al.
EUROPEAN CELLS & MATERIALS (2017)
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Kai Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Fabrication of Aligned Nanofiber Polymer Yarn Networks for Anisotropic Soft Tissue Scaffolds
Shaohua Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
A comprehensive review on droplet-based bioprinting: Past, present and future
Hemanth Gudapati et al.
BIOMATERIALS (2016)
3D bioprinting for engineering complex tissues
Christian Mandrycky et al.
BIOTECHNOLOGY ADVANCES (2016)
3D-printing model for complex aortic transcatheter valve treatment
Michele Gallo et al.
INTERNATIONAL JOURNAL OF CARDIOLOGY (2016)
Cardiothoracic Applications of 3-dimensional Printing
Andreas A. Giannopoulos et al.
JOURNAL OF THORACIC IMAGING (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Beth Ripley et al.
JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY (2016)
Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction
Roberto Gaetani et al.
BIOMATERIALS (2015)
Freeform Inkjet Printing of Cellular Structures with Bifurcations
Kyle Christensen et al.
BIOTECHNOLOGY AND BIOENGINEERING (2015)
Heart valve tissue engineering: how far is the bedside from the bench?
Andres Sanz-Garcia et al.
EXPERT REVIEWS IN MOLECULAR MEDICINE (2015)
Reinforcement of hydrogels using three-dimensionally printed microfibres
Jetze Visser et al.
NATURE COMMUNICATIONS (2015)
Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
Thomas J. Hinton et al.
SCIENCE ADVANCES (2015)
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Ruitong Xiong et al.
BIOFABRICATION (2015)
Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells
B. Duan et al.
ACTA BIOMATERIALIA (2014)
Scaffolds for tissue engineering of cardiac valves
S. Jana et al.
ACTA BIOMATERIALIA (2014)
Inkjet printing biomaterials for tissue engineering: bioprinting
Rachel Elizabeth Saunders et al.
INTERNATIONAL MATERIALS REVIEWS (2014)
A fibrin/hyaluronic acid hydrogel for the delivery of mesenchymal stem cells and potential for articular cartilage repair
Timothy N. Snyder et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2014)
Cell Therapy for Myocardial Infarction
Yoo-Wook Kwon et al.
International Journal of Stem Cells (2014)
Bioprinting Toward Organ Fabrication: Challenges and Future Trends
Ibrahim T. Ozbolat et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2013)
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Bin Duan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Meeting the Need for Regenerative Therapies: Translation-Focused Analysis of U.S. Regenerative Medicine Opportunities in Cardiovascular and Peripheral Vascular Medicine Using Detailed Incidence Data
Bryan Tillman et al.
TISSUE ENGINEERING PART B-REVIEWS (2013)
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Roberto Gaetani et al.
BIOMATERIALS (2012)
Scaffold-free inkjet printing of three-dimensional zigzag cellular tubes
Changxue Xu et al.
BIOTECHNOLOGY AND BIOENGINEERING (2012)
Cardiac telocytes - their junctions and functional implications
Mihaela Gherghiceanu et al.
CELL AND TISSUE RESEARCH (2012)
Hydrogels of collagen/chondroitin sulfate/hyaluronan interpenetrating polymer network for cartilage tissue engineering
Yan Guo et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2012)
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
L. A. Hockaday et al.
BIOFABRICATION (2012)
Aortic valve disease and treatment: The need for naturally engineered solutions
Jonathan T. Butcher et al.
ADVANCED DRUG DELIVERY REVIEWS (2011)
Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies
Carlos C. Chang et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)
Engineering hydrogels as extracellular matrix mimics
Hikmet Geckil et al.
NANOMEDICINE (2010)
Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing
Robert Chang et al.
TISSUE ENGINEERING PART A (2008)
Induction of pluripotent stem cells from adult human fibroblasts by defined factors
Kazutoshi Takahashi et al.
CELL (2007)
Insights into degenerative aortic valve disease
Seth H. Goldbarg et al.
JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY (2007)
Heart valve tissue engineering
I Vesely
CIRCULATION RESEARCH (2005)
Saphenous vein versus PTFE for above-knee femoropopliteal bypass. A review of the literature
P Klinkert et al.
EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2004)
Application of stereolithography for scaffold fabrication for tissue engineered heart valves
R Sodian et al.
ASAIO JOURNAL (2002)
Cardiomyocytes induce endothelial cells to trans-differentiate into cardiac muscle: Implications for myocardium regeneration
G Condorelli et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2001)
Outcomes 15 years after valve replacement with a mechanical versus a bioprosthetic valve: Final report of the Veterans Affairs randomized trial
K Hammermeister et al.
JOURNAL OF THE AMERICAN COLLEGE OF CARDIOLOGY (2000)