4.7 Article

Bone density optimized pedicle screw insertion

Related references

Note: Only part of the references are listed.
Article Biotechnology & Applied Microbiology

The Role of Multifidus in the Biomechanics of Lumbar Spine: A Musculoskeletal Modeling Study

Kuan Wang et al.

Summary: This study investigated the role of multifidus in the lumbar spine biomechanical model and the impact of asymmetric multifidus atrophy on the biomechanics of the lumbar spine. The results demonstrated that incorporating multifidus in the musculoskeletal model is important for increasing the success rate of simulation and decreasing the overestimation of compressive load on the lumbar spine. Asymmetric multifidus atrophy has negligible effect on the lower lumbar spine in the trunk flexion posture.

BIOENGINEERING-BASEL (2023)

Article Computer Science, Interdisciplinary Applications

Bone density optimized pedicle screw instrumentation improves screw pull-out force in lumbar vertebrae

Sebastiano Caprara et al.

Summary: Pedicle screw instrumentation is commonly used in treating various spinal pathologies, but screw loosening is a common complication. This study optimized preoperative planning using genetic algorithms to improve screw purchase in lumbar vertebrae. Testing on human cadaveric spines showed a 26% increase in simulated pull-out strength with optimized screw sizes and trajectories compared to traditional methods.

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2022)

Review Oncology

Posterior Percutaneous Pedicle Screws Fixation Versus Open Surgical Instrumented Fusion for Thoraco-Lumbar Spinal Metastases Palliative Management: A Systematic Review and Meta-analysis

Andrea Perna et al.

Summary: This systematic review and meta-analysis compared PPSF versus OPIF in patients with SM, showing that PPSF treatment is associated with fewer complications, lower infection rates, reduced blood loss, and shorter hospital stays compared to OPIF treatment.

FRONTIERS IN ONCOLOGY (2022)

Article Biotechnology & Applied Microbiology

Biomechanical comparison of pedicle screw fixation strength among three different screw trajectories using single vertebrae and one-level functional spinal unit

Ching-Lung Tai et al.

Summary: This study compared the biomechanical performance of pedicle screw fixation among three trajectories: the traditional trajectory, modified trajectory, and cortical bone trajectory. The results showed that the modified trajectory and cortical bone trajectory had better insertion torque and pullout strength compared to the traditional trajectory in both single vertebrae and functional spinal unit.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Article Orthopedics

Potential contribution of pedicle screw design to loosening rate in patients with degenerative diseases of the lumbar spine: An observational study

Andrey Bokov et al.

Summary: The study aimed to estimate the contribution of screw design to the rate of pedicle screw loosening in patients with degenerative diseases of the lumbar spine. Factors such as screw geometry, thread type, external and internal screw diameter, bone density, number of fused levels, and facet joint resection were analyzed. The findings showed that screw design parameters significantly impacted the loosening rate, along with bone quality characteristics and the number of levels fused.

WORLD JOURNAL OF ORTHOPEDICS (2021)

Review Clinical Neurology

Pedicle screws versus cortical screws in posterior lumbar interbody fusion surgery for degenerative spondylolisthesis: a systematic review and meta-analysis

Min Cheol Chang et al.

Summary: Comparing traditional pedicle screws with cortical bone trajectory-pedicle screws in posterior lumbar fusion surgery, it was found that the cortical screw group had less blood loss and shorter operative time, with a lower total complication rate. However, these findings were based on limited, bias-prone retrospective studies.

SPINE JOURNAL (2021)

Article Orthopedics

Comparison of three different screw trajectories in osteoporotic vertebrae: a biomechanical investigation

J-S Jarvers et al.

Summary: This study compared the fatigue behavior and fixation strength of cement-augmented traditional trajectory, cortical bone trajectory, and midline cortical techniques in osteoporotic patients. The results showed that cement-augmented traditional trajectory had the best fatigue and pull-out characteristics, followed by the midline cortical technique as a promising alternative.

BMC MUSCULOSKELETAL DISORDERS (2021)

Article Chemistry, Multidisciplinary

Biomechanical Comparison of Fixation Stability among Various Pedicle Screw Geometries: Effects of Screw Outer/Inner Projection Shape and Thread Profile

Ming-Kai Hsieh et al.

Summary: The study evaluates the impact of bone density and pilot-hole size on the biomechanical performance of pedicle screw geometries, showing V-shaped threads have higher pullout strength than S-shaped threads across different densities and pilot-hole sizes. A configuration with outer cylindrical shape, inner conical shape and V-shaped threads demonstrates superior insertional torque and pullout strength, even with increasing pilot-hole size, particularly in normal to high bone density.

APPLIED SCIENCES-BASEL (2021)

Article Clinical Neurology

Nitinol Memory Rods Versus Titanium Rods: A Biomechanical Comparison of Posterior Spinal Instrumentation in a Synthetic Corpectomy Model

Patrick A. Massey et al.

Summary: The study compared the biomechanical performance of nitinol memory metal rods and titanium rods as posterior spinal instrumentation in a synthetic model. It found that nitinol rods were comparable to titanium rods in compression, but had higher torsional yield point and torsional toughness. While nitinol trended toward superior fatigue resistance, there was no significant difference in fatigue resistance between nitinol and titanium constructs.

GLOBAL SPINE JOURNAL (2021)

Article Computer Science, Interdisciplinary Applications

Individualized prediction of pedicle screw fixation strength with a finite element model

Jonas Widmer et al.

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2020)

Article Radiology, Nuclear Medicine & Medical Imaging

Computer-assisted pedicle screw trajectory planning using CT-inferred bone density: A demonstration against surgical outcomes

Dejan Knez et al.

MEDICAL PHYSICS (2019)

Article Orthopedics

Pedicle screw augmentation with bone cement enforced Vicryl mesh

Samuel L. Schmid et al.

JOURNAL OF ORTHOPAEDIC RESEARCH (2018)

Article Engineering, Biomedical

A deep learning framework for segmentation and pose estimation of pedicle screw implants based on C-arm fluoroscopy

Hooman Esfandiari et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2018)

Article Engineering, Biomedical

Spinal pedicle screw planning using deformable atlas registration

J. Goerres et al.

PHYSICS IN MEDICINE AND BIOLOGY (2017)

Article Engineering, Biomedical

Pullout performance comparison of novel expandable pedicle screw with expandable poly-ether-ether-ketone shells and cement-augmented pedicle screws

Mehmet Fatih Aycan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2017)

Review Health Care Sciences & Services

Recent Development of Augmented Reality in Surgery: A Review

P. Vavra et al.

JOURNAL OF HEALTHCARE ENGINEERING (2017)

Review Orthopedics

Review of Cortical Bone Trajectory: Evidence of a New Technique

Juan Delgado-Fernandez et al.

ASIAN SPINE JOURNAL (2017)

Article Orthopedics

Predictive validity of preoperative CT scans and the risk of pedicle screw loosening in spinal surgery

Jan Bredow et al.

ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2016)

Article Engineering, Biomedical

Innovative approach in the development of computer assisted algorithm for spine pedicle screw placement

Giovanni E. Solitro et al.

MEDICAL ENGINEERING & PHYSICS (2016)

Article Engineering, Biomedical

Pullout performance comparison of pedicle screws based on cement application and design parameters

Tolga Tolunay et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015)

Article Engineering, Biomedical

A statistical shape model of the human second cervical vertebra

Marine Clogenson et al.

INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2015)

Article Biotechnology & Applied Microbiology

Planning the surgical correction of spinal deformities: toward the identification of the biomechanical principles by means of numerical simulation

Fabio Galbusera et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2015)

Article Engineering, Biomedical

Effects of bone materials on the screw pull-out strength in human spine

Qing Hang Zhang et al.

MEDICAL ENGINEERING & PHYSICS (2006)