4.7 Review

Polyetheretherketone development in bone tissue engineering and orthopedic surgery

Related references

Note: Only part of the references are listed.
Review Orthopedics

Carbon-fiber-reinforced polyetheretherketone orthopedic implants in musculoskeletal and spinal tumors: imaging and clinical features

Jeremiah R. Long et al.

Summary: Carbon-fiber-reinforced polyetheretherketone (CFR-PEEK) orthopedic implants offer many advantages in oncologic applications, including improved evaluation and visualization during imaging, and reduced dose perturbation in radiation therapy. Understanding the impact of these devices is valuable for radiologists.

SKELETAL RADIOLOGY (2023)

Article Orthopedics

Hybrid surgery with PEEK rods for lumbar degenerative diseases: a 2-year follow-up study

Yao Zhao et al.

Summary: This study evaluated the effects and complications of hybrid surgery with PEEK rods in lumbar degenerative diseases. The results showed that hybrid surgery with PEEK rods can yield good clinical results and effectively reduce the incidence of complications such as adjacent segment diseases.

BMC MUSCULOSKELETAL DISORDERS (2022)

Article Orthopedics

High Tibial Osteotomy with a Modern Polyetheretherketone (PEEK) System: Mid-Term Results at a Mean of 6 Years Follow-Up

Lucas K. Keyt et al.

Summary: The purpose of this study was to evaluate the mid-term outcomes of high tibial osteotomy (HTO) using a modern PEEK system. The results showed that this method was safe, effective, and had a low rate of conversion to arthroplasty. Patients experienced reduced pain and maintained a good level of activity, with satisfactory outcome scores.

JOURNAL OF KNEE SURGERY (2022)

Article Surgery

Accurate reconstruction of bone defects in orbital-maxillary-zygomatic (OMZ) complex with polyetheretherketone (PEEK)

Mingming Lv et al.

Summary: This study evaluated the safety and efficacy of using patient-specific polyetheretherketone (PEEK) for the reconstruction of complex defects in the orbital-maxillary-zygomatic (OMZ) complex. With the aid of virtual surgical planning and individual custom-made surgical guides, patient-specific PEEK implantation successfully reconstructed the complicated 3D structure of OMZ complex and showed excellent biocompatibility and clinical outcomes.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2022)

Article Engineering, Biomedical

Genistein loaded into microporous surface of nano tantalum/PEEK composite with antibacterial effect regulating cellular response in vitro, and promoting osseointegration in vivo

Shulin Luo et al.

Summary: TPS has improved surface properties such as roughness and hydrophilicity due to the microporous surface containing Ta nanoparticles. TPS exhibits low antibacterial properties due to the presence of sulfonic group, while TPSG with GS loaded into the microporous surface shows excellent antibacterial properties. Additionally, TPS shows better cell attachment and proliferation compared to TP, while TPSG with GS enhances osteogenic differentiation in vitro.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Endowing Polyetheretherketone Implants with Osseointegration Properties: In Situ Construction of Patterned Nanorod Arrays

Shengmin Zhang et al.

Summary: PEEK is widely used in orthopedic surgeries for its excellent properties, but its clinical application is limited due to biological inertness. A facile modification method is developed to promote osteogenic activity by forming nanorod arrays on the PEEK surface. The study shows that surface-modified PEEK implants exhibit excellent osseointegration properties.

SMALL (2022)

Article Emergency Medicine

Fracture fixation in extremity trauma with carbon fiber-reinforced polyetheretherketone (CFR-PEEK) plates: evidence today

George D. Chloros et al.

Summary: After comparing CFR-PEEK plates with conventional plates in fracture fixation, it was found that there was no significant difference in union rates and clinical outcomes between the two.

EUROPEAN JOURNAL OF TRAUMA AND EMERGENCY SURGERY (2022)

Article Engineering, Biomedical

Comparison of surface properties, cell behaviors, bone regeneration and osseointegration between nano tantalum/PEEK composite and nano silicon nitride/PEEK composite

Gangfeng Hu et al.

Summary: In this study, Ta/PEEK composite (TPC) and SN/PEEK composite (SPC) were fabricated for load-bearing bone repair by blending PEEK with Ta and SN nanoparticles, respectively. The TPC showed higher surface roughness, hydrophilicity, and surface energy compared to SPC. Moreover, TPC exhibited low antibacterial property while SPC showed high bacterial property. The MC3T3-E1 cells responses to TPC were the highest among all samples tested in vitro. Furthermore, new bone formation and osseointegration were highest for TPC in vivo. Therefore, addition of Ta and SN nanoparticles into PEEK can enhance the bioactivity and mechanical properties of the composites, making them promising materials for bone repair.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2022)

Article Biochemistry & Molecular Biology

Surface modification of polyetheretherketone (PEEK) to enhance osteointegration by grafting strontium Eucommia ulmoides polysaccharides

Zhang Mengdi et al.

Summary: This study introduces EUP-Sr to the PEEK surface to form a bioactive PEEK named DPEEK@EUP-Sr. In vitro experiments show that DPEEK@EUP-Sr can effectively promote cell proliferation and exhibit anti-inflammation and osteogenesis effects.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Clinical Neurology

Customized polyetheretherketone (PEEK) implants are associated with similar hospital length of stay compared to autologous bone used in cranioplasty procedures

Khashayar Mozaffari et al.

Summary: This study analyzed the feasibility of PEEK cranioplasty compared to autologous cranioplasty. The results suggest that PEEK biomaterials may offer better complication outcomes and similar hospital length of stay in cranioplasty. Further research is needed to validate these findings.

JOURNAL OF THE NEUROLOGICAL SCIENCES (2022)

Article Materials Science, Biomaterials

Surface Modification of Carbon Fiber-Reinforced Polyetheretherketone with MXene Nanosheets for Enhanced Photothermal Antibacterial Activity and Osteogenicity

Tianhui Du et al.

Summary: In this study, CFPEEK implants were surface modified with Ti3C2Tx nanosheets to enhance their photothermal antibacterial activity and osteogenicity. The modified materials showed effective bacterial inhibition and promoted bone formation.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Article Materials Science, Biomaterials

The Role of Surface Chemistry in the Osseointegration of PEEK Implants

Emily Buck et al.

Summary: Poly(etheretherketone) (PEEK) implants with added NH2 and COOH groups on their surface can modulate macrophage responses and improve osseointegration. NH2-functionalized surfaces induce pro-inflammatory macrophage responses, while COOH-functionalized surfaces induce anti-inflammatory macrophage responses. The protein adsorption patterns on these surfaces are related to the varied inflammatory responses. NH2 surfaces inhibit the osteogenic differentiation of mesenchymal stem cells (MSCs) compared to COOH surfaces, despite promoting more mineralization in simulated body fluid solutions. In the rat tibia unicortical defects study, the bone around NH2 surfaces had thinner trabeculae and higher specific bone surface, indicating improved bone binding compared to unmodified implants. COOH surfaces only showed a trend in increasing bone binding. The results suggest that a combination of both mineral-binding and immune responses can improve osseointegration of PEEK implants.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2022)

Article Biophysics

Impact of rGO-coated PEEK and lattice on bone implant

Bankole I. Oladapo et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2022)

Article Biochemistry & Molecular Biology

Application of Porous Polyetheretherketone Scaffold/Vancomycin-Loaded Thermosensitive Hydrogel Composites for Antibacterial Therapy in Bone Repair

Desheng Qi et al.

Summary: This study proposes a high-strength porous polyetheretherketone scaffold loaded with antibacterial drug-loaded hydrogel strategy to address the issue of bacterial infection in bone repair. The results demonstrate that the scaffold exhibits excellent mechanical properties and antibacterial ability, indicating its potential in bone repair surgery applications.

MACROMOLECULAR BIOSCIENCE (2022)

Article Clinical Neurology

PEEK versus titanium-coated PEEK cervical cages: fusion rate

Bartosz Godlewski et al.

Summary: This study compared the fusion outcomes of PEEK implants versus TC-PEEK implants, finding a significantly higher rate of complete fusion at 12 months post-surgery with PEEK implants.

ACTA NEUROCHIRURGICA (2022)

Article Orthopedics

Disappointing long-term outcome of THA with carbon-fiber-reinforced poly-ether-ether-ketone (CFR-PEEK) as acetabular insert liner: a prospective study with a mean follow-up of 14.3 years

Luc J. M. Heijnens et al.

Summary: The study evaluated the use of carbon-fiber-reinforced poly-ether-ether-ketone (CFR-PEEK) insert liner in cementless total hip arthroplasties (THAs). Despite low wear rate of CFR-PEEK liners over 14.3 years, there were four cases of aseptic loosening in acetabular components, leading to the recommendation against routine use of CFR-PEEK insert liners in cementless THAs.

HIP INTERNATIONAL (2021)

Article Clinical Neurology

PLIF surgery with titanium-coated PEEK or uncoated PEEK cages: a prospective randomised clinical and radiological study

Klaus John Schnake et al.

Summary: The study showed that PEEK and titanium-coated PEEK cages for PLIF produce equally favorable clinical and radiological results, with no significant difference in fusion rates.

EUROPEAN SPINE JOURNAL (2021)

Article Nanoscience & Nanotechnology

Fabrication of Dexamethasone-Loaded Dual-Metal-Organic Frameworks on Polyetheretherketone Implants with Bacteriostasis and Angiogenesis Properties for Promoting Bone Regeneration

Tianhua Xiao et al.

Summary: A multifunctional PEEK implant with strong antibacterial ability, angiogenesis promotion, and osteogenesis properties was developed. The coating on the implant surface released various substances upon degradation, forming an alkaline microenvironment and enhancing its bioactivity. In vitro and in vivo experiments demonstrated promising clinical potential for bone graft materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Orthopedics

Titanium interlayer-mediated hydroxyapatite-coated polyetheretherketone cage in transforaminal lumbar interbody fusion surgery

Ce Zhu et al.

Summary: This study aimed to evaluate the radiographic and clinical outcomes of TLIF patients using PEEK-Ti-HA cages. The study found that PEEK-Ti-HA cages had a higher fusion rate at 3 months post-surgery compared to uncoated PEEK cages, but both groups reached 100% fusion rate at final follow-up. Additionally, there were no significant differences in RL, DH, JOA scores, and VAS scores between the two groups post-surgery.

BMC MUSCULOSKELETAL DISORDERS (2021)

Article Engineering, Biomedical

Antibacterial activity, bio-compatibility and osteogenic differentiation of graphene oxide coating on 3D-network poly-ether-ether-ketone for orthopaedic implants

Cui Guo et al.

Summary: Sulfonated PEEK with deposited GO coating exhibited improved antibacterial properties and biocompatibility. The coating showed strong antibacterial activity against dental pathogens, good adhesion and proliferation of cells, and osteogenic differentiation as a bone implant material.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2021)

Review Polymer Science

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Shivam Verma et al.

Summary: The review study highlights the progress of PEEK and its composite materials in biomedical applications, showing their potential as alternative materials for conventional implants. PEEK exhibits excellent mechanical and physicochemical properties, contributing to successful applications in dentistry, knee implants, hip replacement, spine implants, and other areas. Further research is needed to optimize techniques and enhance accessibility of PEEK and its composites for broader societal benefits.

EUROPEAN POLYMER JOURNAL (2021)

Article Materials Science, Biomaterials

MC3T3-E1 cell response to microporous tantalum oxide surfaces enriched with Ca, P and Mg

C. F. Almeida Alves et al.

Summary: The formation of a porous oxide surface doped with osteoconductive elements through micro arc oxidation was investigated, with studies on the effect of parameters like electrolyte composition on surface morphology and chemical composition. In vitro tests confirmed the biocompatibility and non-toxicity of the samples, with promising results for cell differentiation in the Ta-CaP samples.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Review Biochemical Research Methods

Surface engineering of biomaterials in orthopedic and dental implants: Strategies to improve osteointegration, bacteriostatic and bactericidal activities

Ziqian Liu et al.

Summary: The success of biomedical implants relies on improving bone-implant integration and preventing infections. Different surface coating strategies can enhance osteointegration and biocompatibility, leading to better performance in orthopedic and dental applications.

BIOTECHNOLOGY JOURNAL (2021)

Article Critical Care Medicine

A carbon fiber-reinforced polyetheretherketone intramedullary nail improves fracture site visibility on postoperative radiographic images

Kazuma Takashima et al.

Summary: In a retrospective study comparing carbon fiber-reinforced polyetheretherketone (CFR/PEEK) intramedullary nails with traditional metallic intramedullary nails for treating trochanteric femoral fractures, it was found that CFR/PEEK nails provided superior visibility of the fracture site on radiographs and exhibited lower scattering on CT images compared to metallic nails. The results suggest that CFR/PEEK intramedullary nails have advantages in evaluating fracture reduction and bone formation, as well as in diagnosing peri-prosthetic cancellous and cortical bone.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2021)

Article Clinical Neurology

Nonunion Rates After Anterior Cervical Discectomy and Fusion: Comparison of Polyetheretherketone vs Structural Allograft Implants

Won Hyung A. Ryu et al.

Summary: Despite advancements in implant materials like PEEK aimed at improving outcomes after ACDF, factors such as younger age, smoking status, and number of operated levels are independent predictors of fusion failure. Nonunion rates were higher with PEEK implants, but a higher proportion of nonunion cases in the allograft cohort required posterior instrumentation.

NEUROSURGERY (2021)

Article Clinical Neurology

Evaluation of cage subsidence in standalone lateral lumbar interbody fusion: novel 3D-printed titanium versus polyetheretherketone (PEEK) cage

Dominik Adl Amini et al.

Summary: The study compared the early subsidence rate of standalone 3D-printed titanium (Ti) versus polyetheretherketone (PEEK) interbody cages after lateral lumbar interbody fusion (LLIF), and found that Ti cages had a significantly lower rate of subsidence than PEEK cages, particularly in cases of severe subsidence.

EUROPEAN SPINE JOURNAL (2021)

Article Immunology

Hinokitiol inhibits RANKL-induced osteoclastogenesis in vitro and prevents ovariectomy-induced bone loss in vivo

Yanben Wang et al.

Summary: Hinokitiol was found to inhibit RANKL-induced osteoclast formation and bone resorption in vitro, and protected against ovariectomy-induced bone loss in vivo, suggesting its potential as an effective agent for treating osteoclast-induced osteoporosis.

INTERNATIONAL IMMUNOPHARMACOLOGY (2021)

Article Pharmacology & Pharmacy

Facile surface functional polyetheretherketone with antibacterial and immunoregulatory activities for enhanced regeneration toward bacterium-infected bone destruction

An'an Sun et al.

Summary: This study developed a simple co-deposition strategy to modify porous PEEK with enhanced antibacterial activity and controllable immunoregulatory ability. The modified PEEK showed improved osseointegration and antibacterial properties due to successful immobilization of gentamicin sulfate. In vivo results using rat models demonstrated the excellent healing effect of the modified PEEK on bone defects with infection, highlighting its potential for clinical applications.

DRUG DELIVERY (2021)

Article Engineering, Biomedical

3D printing of PEEK-cHAp scaffold for medical bone implant

Bankole I. Oladapo et al.

Summary: The study aimed to enhance the adhesion between implants and surrounding tissues by incorporating PEEK with cHAp to fabricate PEEK-cHAp biocomposite, using a surface treatment strategy to create microporous architectures and investigate its mechanical and thermal strengths as well as in vitro cytotoxicity. Innovative technique was used to create porous nanostructure to promote biological integration.

BIO-DESIGN AND MANUFACTURING (2021)

Article Critical Care Medicine

Clinical outcomes of proximal femoral fractures treated with a novel carbon fiber-reinforced polyetheretherketone intramedullary nail

Kazuma Takashima et al.

INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2020)

Article Materials Science, Biomaterials

Rapid construction of polyetheretherketone (PEEK) biological implants incorporated with brushite (CaHPO4•2H2O) and antibiotics for anti-infection and enhanced osseointegration

Zhiqiang Xue et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

Article Nanoscience & Nanotechnology

Multifunctional Surface with Enhanced Angiogenesis for Improving Long-Term Osteogenic Fixation of Poly(ether ether ketone) Implants

Taosheng Dong et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Chemical

Fabrication of Ag Nanosheet@TiO2 Antibacterial Membranes for Inulin Purification

Shuangyu Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Biomedical

Incorporation of nanosized calcium silicate improved osteointegration of polyetheretherketone under diabetic conditions

Rui Ma et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2020)

Article Materials Science, Biomaterials

Tantalum nanoparticles reinforced polyetheretherketone shows enhanced bone formation

Hao Zhu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Orthopedics

Evaluating the bioactivity of a hydroxyapatite-incorporated polyetheretherketone biocomposite

Rui Ma et al.

JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2019)

Article Materials Science, Biomaterials

Nano Textured PEEK Surface for Enhanced Osseointegration

Liping Ouyang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

Review Polymer Science

3D printing of polyether-ether-ketone for biomedical applications

Sunpreet Singh et al.

EUROPEAN POLYMER JOURNAL (2019)

Article Medicine, Research & Experimental

Current methods of preventing aseptic loosening and improving osseointegration of titanium implants in cementless total hip arthroplasty: a review

Dragos Apostu et al.

JOURNAL OF INTERNATIONAL MEDICAL RESEARCH (2018)

Article Biochemistry & Molecular Biology

Incorporating Si3N4 into PEEK to Produce Antibacterial, Osteocondutive, and Radiolucent Spinal Implants

Giuseppe Pezzotti et al.

MACROMOLECULAR BIOSCIENCE (2018)

Review Chemistry, Multidisciplinary

Nanoscience-Based Strategies to Engineer Antimicrobial Surfaces

Serena Rigo et al.

ADVANCED SCIENCE (2018)

Review Clinical Neurology

Outcomes following polyetheretherketone (PEEK) cranioplasty: Systematic review and meta-analysis

Maria Punchak et al.

JOURNAL OF CLINICAL NEUROSCIENCE (2017)

Article Nanoscience & Nanotechnology

Layer-by-layer self-assembled multilayers on PEEK implants improve osseointegration in an osteoporosis rabbit model

Xilin Liu et al.

NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE (2017)

Article Nanoscience & Nanotechnology

Enhanced Antimicrobial Efficacy of Bimetallic Porous CuO Microspheres Decorated with Ag Nanoparticles

Xuemei Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Enhanced Bioactivity and Bacteriostasis of Surface Fluorinated Polyetheretherketone

Meiling Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

Strontium-Substituted Submicrometer Bioactive Glasses Modulate Macrophage Responses for Improved Bone Regeneration

Wen Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Review Chemistry, Multidisciplinary

Assessing biocompatibility of graphene oxide-based nanocarriers: A review

Siaw Fui Kiew et al.

JOURNAL OF CONTROLLED RELEASE (2016)

Article Engineering, Biomedical

Polyetheretherketone (PEEK) for medical applications

Ivan Vladislavov Panayotov et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)

Review Immunology

Roles of Zinc Signaling in the Immune System

Shintaro Hojyo et al.

JOURNAL OF IMMUNOLOGY RESEARCH (2016)

Review Dentistry, Oral Surgery & Medicine

Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics

Shariq Najeeb et al.

JOURNAL OF PROSTHODONTIC RESEARCH (2016)

Article Engineering, Biomedical

Apatite-forming PEEK with TiO2 surface layer coating

Takashi Kizuki et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2015)

Review Nanoscience & Nanotechnology

Osseointegration of Implants Surface-Treated with Various Diameters of TiO2 Nanotubes in Rabbit

Cheul-Goo Kang et al.

JOURNAL OF NANOMATERIALS (2015)

Review Dentistry, Oral Surgery & Medicine

Nanomodified Peek Dental Implants: Bioactive Composites and Surface Modification-A Review

Shariq Najeeb et al.

INTERNATIONAL JOURNAL OF DENTISTRY (2015)

Article Chemistry, Analytical

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

Bethany C. Gross et al.

ANALYTICAL CHEMISTRY (2014)

Article Engineering, Biomedical

Osseointegration of machined, injection moulded and oxygen plasma modified PEEK implants in a sheep model

Alexandra H. C. Poulsson et al.

BIOMATERIALS (2014)

Review Chemistry, Physical

Harnessing nanotopography and integrin-matrix interactions to influence stem cell fate

Matthew J. Dalby et al.

NATURE MATERIALS (2014)

Article Orthopedics

Use of Carbon-Fiber-Reinforced Composite Implants in Orthopedic Surgery

David J. Hak et al.

ORTHOPEDICS (2014)

Article Chemistry, Applied

UV-light assisted single step route to functional PEEK surfaces

Ahmed Yousaf et al.

REACTIVE & FUNCTIONAL POLYMERS (2014)

Article Instruments & Instrumentation

Surface Morphology and Wettability of Sandblasted PEEK and Its Composites

R. Ourahmoune et al.

SCANNING (2014)

Article Biochemistry & Molecular Biology

Genistein Promotion of Osteogenic Differentiation through BMP2/SMAD5/RUNX2 Signaling

Jin Dai et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL SCIENCES (2013)

Article Engineering, Biomedical

Nano-hydroxyapatite-coated PEEK implants: A pilot study in rabbit bone

Sargon Barkarmo et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)

Article Chemistry, Multidisciplinary

Structure of Polydopamine: A Never-Ending Story?

Juergen Liebscher et al.

LANGMUIR (2013)

Article Orthopedics

Complications of Bioabsorbable Suture Anchors in the Shoulder

Aman Dhawan et al.

AMERICAN JOURNAL OF SPORTS MEDICINE (2012)

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks in Biomedicine

Patricia Horcajada et al.

CHEMICAL REVIEWS (2012)

Editorial Material Orthopedics

Principles of Biomechanics and Biomaterials in Orthopaedic Surgery

S. Raymond Golish et al.

JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2011)

Review Engineering, Biomedical

PEEK biomaterials in trauma, orthopedic, and spinal implants

Steven M. Kurtz et al.

BIOMATERIALS (2007)

Review Orthopedics

The use of anchors in shoulder surgery: A shift from metallic to bioabsorbable anchors

Mehmet Ozbaydar et al.

ARTHROSCOPY-THE JOURNAL OF ARTHROSCOPIC AND RELATED SURGERY (2007)

Article Engineering, Biomedical

Polyetheretherketone as a biomaterial for spinal applications

JM Toth et al.

BIOMATERIALS (2006)