☆ 4.7 Article

4D printing of magneto-responsive polymer structures by masked stereolithography for miniaturised actuators

VIRTUAL AND PHYSICAL PROTOTYPING (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications

Mussadiq Shah et al.

Summary: The synthesis and manufacturing of polymer nanocomposites have attracted attention due to their superior properties compared to traditional industrial materials. The vat photopolymerization (VPP) process is an additive manufacturing technique that offers low cost, high flexibility, and accuracy in printing intricate polymer parts. The integration of nanocomposites and VPP-based 3D printing processes shows promise in surpassing traditional manufacturing techniques. This review provides a comprehensive understanding of VPP-based 3D printing of polymer nanocomposites, including the theoretical background, engineering capabilities, challenges, and potential benefits.

RSC ADVANCES (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent Influence on the Magnetization and Phase of Fe-Ni Alloy Nanoparticles Generated by Laser Ablation in Liquids

Inna Y. Khairani et al.

Summary: The synthesis of iron-nickel nanoparticles with control over their properties and oxidation level is challenging due to the presence of water impurities in cost-effective solvents. Pulsed laser ablation in liquid can modulate the properties of the generated nanoparticles, but the influence of water impurities on FeNi nanoparticles was investigated in this study.

NANOMATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Chemistry in light-induced 3D printing

Alejandra Salas et al.

Summary: In recent years, 3D printing has expanded its applications from rapid prototyping and hobbyists to various industries, research fields and everyday life. The focus has shifted towards the development of equipment, software, and materials, especially in the field of light-activated 3D printing which relies on photocurable formulations and rapid solidification via photopolymerization. This article analyzes and explains the chemical aspects of preparing a formulation for light-induced 3D printing, aiming to provide more tools for the development of innovative photocurable materials for 3D printable devices.

CHEMTEXTS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Tough PEGgels by In Situ Phase Separation for 4D Printing

Zhenwu Wang et al.

Summary: In this study, a simple and efficient method is developed for the fabrication of tough polymer gels by polymerizing 2-hydroxyethyl methacrylate (HEMA) in a mixture of poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG). The resulting phase-separated gel demonstrates high strength, favorable fracture strain, and large toughness. Furthermore, the gel exhibits shape memory properties. The combination of tunable tough PEG gels with 3D printing and shape memory abilities shows the potential of PEG gels for 4D printing.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Photon Polymerization of Sugar Responsive 4D Microstructures

Alexa Ennis et al.

Summary: Stimuli-responsive hydrogels have attracted attention for their versatility in offering intelligent solutions for biomimicry applications. Two photon polymerization (2PP) has provided a means of fabricating intricate 3D structures from stimuli-responsive hydrogels. A phenylboronic acid-based photoresist compatible with 2PP is presented to fabricate stimuli-responsive microstructures with accelerated response times.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Engineering, Multidisciplinary

4D printing of mechanically robust PLA/TPU/Fe3O4 magneto-responsive shape memory polymers for smart structures

Han Liu et al.

Summary: This study proposes a promising magneto-responsive shape memory polymer (SMP) for 3D printing. The SMP exhibits robust mechanical properties and magnetic responsiveness. The research also demonstrates the rapid magnetic response and high recovery performance of the material, as well as its ability to change and recover shape under a contactless magnetic field. These findings have significant implications for applications in 3D printing.

COMPOSITES PART B-ENGINEERING (2023)

Add to Collection

Article Chemistry, Physical

Green nanoparticle synthesis at scale: a perspective on overcoming the limits of pulsed laser ablation in liquids for high-throughput production

Inna Y. Khairani et al.

Summary: Nanoparticles are increasingly important for various applications, and pulsed laser ablation in liquid is a promising method for their production. However, the current production rate is limited, and efforts are being made to scale up the production rate to unlock its full potential. Controlling parameters and developing new strategies can increase the productivity of pulsed laser ablation in liquids.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Magnetic Soft Materials and Robots

Yoonho Kim et al.

Summary: This review discusses recent progress in the design and fabrication, modeling and simulation, and actuation and control of magnetic soft materials and robots. Design guidelines for optimal actuation performance are provided, as well as potential biomedical applications and perspectives on next-generation magnetic soft robots.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Tribological characteristics of digital light processing (DLP) 3D printed graphene/resin composite: Influence of graphene presence and process settings

Muammel M. Hanon et al.

Summary: The manufacturing process has been greatly influenced by the introduction of 3D printing and graphene. This study explores the tribological behavior of 3D printed graphene/resin composite and finds that graphene significantly reduces the friction coefficient and affects the surface roughness, microstructure, wear, and hardness characteristics of the material.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Photoactivity, conversion kinetics, nanoreinforcement, post-curing, and electric/dielectric properties of functional 3D printable photopolymer resin filled with bare and alumina-doped ZnO nanoparticles

Martina Korcuskova et al.

Summary: Adding nanoparticles to a polymer matrix can enhance functional properties, and combining this with 3D printing creates a versatile fabrication tool. However, the effects of nanoparticles must also be considered. This study investigates the addition of alumina-doped zinc oxide nanoparticles to a photo-polymerization resin and compares three experimental techniques for assessing photocuring kinetics.

POLYMER TESTING (2022)

Add to Collection

Article Polymer Science

Stereolithography of Semiconductor Silver and Acrylic-Based Nanocomposites

Luisa M. Valencia et al.

Summary: Polymer nanocomposites have great potential in various fields, especially electrically conductive and semiconductor materials, which are attracting attention for biomedical, optoelectronic, and sensing applications. By using metallic nanoparticles as nanoadditives, researchers have successfully increased the electrical conductivity of acrylic resin nanocomposites. They have also developed a method to enhance the density of silver nanoparticles by using different solvents, leading to improved electrical behavior. The fabricated nanocomposites with high density of silver nanoparticles show significant increase in electrical conductivity, reaching the semiconductor regime. The use of auxiliary solvents during the printing process affects the mechanical properties and degree of cure of the nanocomposites. These nanocomposites prepared by this method hold promise for electronic applications.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Improved mechanical properties of SiC fiber reinforced silica-based ceramic cores fabricated by stereolithography

W. Zheng et al.

Summary: In this study, silica-based ceramics with SiC fiber addition were prepared via stereolithography, and the influence of SiC fiber content on mechanical properties was investigated. With the increase of SiC fiber content, linear shrinkage gradually decreased, while room temperature and high temperature flexural strength first increased and then decreased. Addition of 4.0 wt% SiC fiber resulted in improved mechanical properties, making it suitable for the rapid manufacturing of hollow blades.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Biomedical

A Development of New Material for 4D Printing and the Material Properties Comparison between the Conventional and Stereolithography Polymerised NVCL Hydrogels

Shuo Zhuo et al.

Summary: This study demonstrates the concept of 4D printing by using a temperature-responsive polymer to prepare 4D prints that exhibit intelligent and reversible expansion/shrinkage behavior. Characterization tests reveal significant differences in tensile properties, swellability, and wettability between photopolymerised and printed parts, despite their similar chemical structures and thermal properties.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetic-field-assisted DLP stereolithography for controlled production of highly aligned 3D printed polymer-Fe3O4@graphene nanocomposites

Hammad Younes et al.

Summary: This paper demonstrates the printing of nanocomposites using the DLP method with aligned magnetic Fe3O4@graphene fillers, showing significant improvement in mechanical properties. The results indicate that 0 alignment provides better mechanical properties compared to 90 alignment for filler concentrations of 0.4, 0.8, and 1.6 wt.%.

MATERIALS RESEARCH BULLETIN (2022)

Add to Collection

Review Polymer Science

Magnetic 3D-Printed Composites-Production and Applications

Guido Ehrmann et al.

Summary: This article provides an overview of magnetic composites 3D-printed using different techniques and their potential applications. By embedding nanoparticles in the printing material, additional functionalities can be added to the objects. The influence of printing parameters on the magnetic and mechanical properties of these polymer/magnetic composites is also discussed.

POLYMERS (2022)

Add to Collection

Review Electrochemistry

Additive manufacturing (3D printing) of electrically conductive polymers and polymer nanocomposites and their applications

Kirstie R. Ryan et al.

Summary: This review summarizes the achievements and limitations of additive manufacturing of conductive polymers, and explores their potential applications compared to traditional manufacturing methods.

ESCIENCE (2022)

Add to Collection

Article Engineering, Biomedical

3D Printing of a Graphene-Modified Photopolymer Using Stereolithography for Biomedical Applications: A Study of the Polymerization Reaction

S. Lopez de Armentia et al.

Summary: Graphene-based nanomaterials (GBN) have potential advantages in additive manufacturing, but their effects on polymerization are still not well understood.

INTERNATIONAL JOURNAL OF BIOPRINTING (2022)

Add to Collection

Article Robotics

3D Printing Microactuators for Soft Microrobots

Manav Tyagi et al.

Summary: This study demonstrates the additive manufacturing of soft microactuators and microrobots using a custom-built extrusion 3D printer to create even smaller structures in the micrometer domain. The research showcases the ease and versatility of the 3D printing process in fabricating microactuators with varying lengths and microrobotic devices consisting of rigid body and individually controlled free-moving arms or legs.

SOFT ROBOTICS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Laser Synthesis of Magnetic Nanoparticles in Liquids and Application in the Fabrication of Polymer-Nanoparticle Composites

Nikolaos G. Semaltianos et al.

Summary: The method of synthesizing nanoparticles in solution by laser ablation of bulk target materials in a liquid does not require chemical precursors, resulting in ultrapure colloids with unique physicochemical properties. These magnetic nanoparticles can be used in the fabrication of magnetic nanocomposites, forming direct chemical bonds with the polymer matrix and providing high electrical conductivity while maintaining optical transparency.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Combining ultrasound directed self-assembly and stereolithography to fabricate engineered polymer matrix composite materials with anisotropic electrical conductivity

K. Niendorf et al.

Summary: The spatial arrangement and alignment of electrically conductive microfibers in a polymer matrix using acoustic radiation force and ultrasound technology are key factors in determining the electrical properties of composite materials. The probability of a material specimen being electrically conductive is influenced by parameters such as microfiber weight fraction and alignment, which contribute to the formation of a long-range percolated network of conductive microfibers. The combination of ultrasound DSA and SLA fabrication process is independent of fiber and matrix material properties, enabling dimensional scalability for engineering applications.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Stereolithography (SLA) 3D printing of carbon fiber-graphene oxide (CF-GO) reinforced polymer lattices

Ran Xiao et al.

Summary: A novel carbon fiber-graphene oxide (CF-GO) polymer composite resin, along with mild annealing postprocess, significantly enhances the compression strength of stereolithography (SLA)-printed oct-truss (OCT) lattices. The study demonstrates that incorporating a suitable amount of CF-GO, combined with annealing treatment, can increase the mechanical properties of polymer OCT lattices by nearly 10 times.

NANOTECHNOLOGY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Synthesis of gold, platinum, and gold-platinum alloy nanoparticle colloids with high-power megahertz-repetition-rate lasers: the importance of the beam guidance method

Friedrich Waag et al.

Summary: Noble metal nanoparticles and their alloys are important for biomedicine and catalysis, and laser ablation in liquids is a method used to access high-purity colloids, although current productivity may hinder industrial implementation. Innovative laser technology may help distribute this method further. A comparison of galvanometer scanning and polygon-wheel scanning found that the scan pattern dimensions are crucial, with a threshold pattern length determining the more productive technology. Gold ablation had lower productivity compared to platinum, but alloying gold with 10% platinum improved productivity to nearly the same level as pure platinum.

APPLIED NANOSCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Preparation of Smart Materials by Additive Manufacturing Technologies: A Review

Kunal Mondal et al.

Summary: Over the last few decades, advanced manufacturing and additive printing technologies, especially 3D printing and the emerging 4D printing, have made significant advancements in engineering, transportation, and healthcare. These technologies offer features such as fast prototyping, complex structure fabrication, shape memory, and shape-changing capabilities, with huge potential applications in the biomedical field.

MATERIALS (2021)

Add to Collection

Article Polymer Science

3D Printing of Thermoplastic Elastomers: Role of the Chemical Composition and Printing Parameters in the Production of Parts with Controlled Energy Absorption and Damping Capacity

Marina Leon-Calero et al.

Summary: This paper investigates the chemical, thermal, and mechanical properties of commercial thermoplastic polyurethane filaments, with compression tests used to study the impact of infill density and infill pattern on the properties of 3D printed parts. Optimal specific energy absorption and specific damping capacity performances were achieved with a honeycomb pattern at 50% infill density.

POLYMERS (2021)

Add to Collection

Review Engineering, Manufacturing

The recent development of vat photopolymerization: A review

Feng Zhang et al.

Summary: Vat photopolymerization (VPP) technology is popular due to its high speed, high accuracy, and broad applications, especially in the biomedical field. However, challenges remain in aspects such as printing speed, resolution, and multi-material capability.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Polymer Science

4D printing of shape memory polylactic acid (PLA)

Mehrshad Mehrpouya et al.

Summary: Additive manufacturing, particularly in the form of 4D printing, has gained significant attention in recent years for enabling the production of parts with time-dependent shapes and responses to environmental stimuli. The use of materials like polylactic acid (PLA) polymer, known for its great shape memory behavior, allows for the design and manufacturing of a wide range of smart products through 4D printing techniques. Research has focused on exploring the material properties, self-folding structures, and impact of design and printing conditions on the functionality of final printed products using PLA for 4D printing.

POLYMER (2021)

Add to Collection

Review Polymer Science

3D/4D Printing of Polymers: Fused Deposition Modelling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA)

Abishek Kafle et al.

Summary: This article discusses three widely used polymer-based 3D printing processes - FDM, SLS, and SLA, providing a comparative overview of material-process-properties and advanced requirements for 4D printing. It also serves as a guide for selecting suitable print materials and techniques for polymer-based applications, as well as discussing implementation practices towards 4D printing of polymer-based systems.

POLYMERS (2021)

Add to Collection

Review Chemistry, Analytical

Directed Assembly of Particles for Additive Manufacturing of Particle-Polymer Composites

Soheila Shabaniverki et al.

Summary: Particle-polymer dispersions are commonly used in additive manufacturing to create composite materials with enhanced properties through directional alignment of the particles. Various field mechanisms like electric, magnetic, and acoustic fields are utilized during the AM process to achieve particle alignment and create structured composites with unique properties. Understanding particle transport in polymers can lead to improved control of the AM process and customization of particle-polymer composites for specific applications.

MICROMACHINES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of Fe-Ni Nanoparticle Strands in Macroscopic Polymer Composites: Experiment and Simulation

Ruksan Nadarajah et al.

Summary: The formation of Fe-Ni nanoparticle strands induced by magnetic fields in a PMMA matrix is influenced by intrinsic and extrinsic parameters, and understanding and optimizing these parameters in the fabrication process is crucial for predicting resulting structures. The critical dimensions of the strands were investigated through experiments and simulations, with optimal parameters found for strand formation of Fe50Ni50 nanoparticles. Characterization of the aligned strands' anisotropic behavior was successfully achieved through magnetometry measurements.

NANOMATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Programming the microstructure of magnetic nanocomposites in DLP 3D printing

Simone Lantean et al.

Summary: The ability to program the behavior of magneto-reactive polymers requires fine control of the magnetic microstructure during printing, which is achieved by studying the formation and rotation of chain-like structures by varying experimental parameters.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Chemistry, Applied

DLP printing photocurable chitosan to build bio-constructs for tissue engineering

Yi Shen et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Mechanical and Thermal Properties of Stereolithography 3D Printed Structures by the Effects of Incorporated Controllably Annealed Anatase TiO2 Nanoparticles

Suhail Mubarak et al.

NANOMATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility

Chengwei Feng et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Add to Collection

Article Engineering, Manufacturing

Energy Consumption Modeling of 4D Printing Thermal-responsive Polymers with Integrated Compositional Design for Material

Muyue Han et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Wireless Control of Two- and Three- Dimensional Actuations of Kirigami Patterns Composed of Magnetic-Particles-Polymer Composites

Trivoramai Jiralerspong et al.

ACS NANO (2020)

Add to Collection

Article Engineering, Manufacturing

How colloidal surface additivation of polyamide 12 powders with well-dispersed silver nanoparticles influences the crystallization already at low 0.01 vol%

Tim Hupfeld et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing of magnetic parts by laser powder bed fusion of iron oxide nanoparticle functionalized polyamide powders

Tim Hupfeld et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Polymer-based actuators: back to the future

P. Martins et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

Add to Collection

Review Polymer Science

Stimuli-responsive materials in additive manufacturing

Ryan T. Shafranek et al.

PROGRESS IN POLYMER SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A novel highly electrically conductive composite resin for stereolithography

Giorgio Scordo et al.

MATERIALS TODAY COMMUNICATIONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing dental composite resins with sustaining antibacterial ability

Liu Sa et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release

Hakan Ceylan et al.

ACS NANO (2019)

Add to Collection

Review Public, Environmental & Occupational Health

4D printing applications in medical field: A brief review

Mohd Javaid et al.

CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Investigation of a Magnetic Field-Assisted Digital-Light-Processing Stereolithography for Functionally Graded Materials

Shahriar Safaee et al.

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)

Add to Collection

Article Electrochemistry

Bio-Mimic Motion of 3D-Printed Gel Structures Dispersed with Magnetic Particles

Hayato Shinoda et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing

Yong Zeng et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Review Nanoscience & Nanotechnology

3D printing of soft robotic systems

T. J. Wallin et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Polymer Science

3D Printing System of Magnetic Anisotropy for Artificial Cilia

Seiji Azukizawa et al.

JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Polymer Science

Fabrication of Conducting Polyacrylate Resin Solution with Polyaniline Nanofiber and Graphene for Conductive 3D Printing Application

Hoseong Han et al.

POLYMERS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus

Pengfei Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Magnetic Nanostructured System for Biomedical Applications Based on FeNi Nanotubes

A. L. Kozlovskiy et al.

NANOTECHNOLOGIES IN RUSSIA (2018)

Add to Collection

Article Engineering, Manufacturing

Magnetic-Field-Assisted Projection Stereolithography for Three-Dimensional Printing of Smart Structures

Lu Lu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Article Chemistry, Physical

Untitled

PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2017)

Add to Collection

Article Chemistry, Applied

Lignin-coated cellulose nanocrystal filled methacrylate composites prepared via 3D stereolithography printing: Mechanical reinforcement and thermal stabilization

Xinhao Feng et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

High-Strength Stereolithographic 3D Printed Nanocomposites: Graphene Oxide Metastability

Jill Z. Manapat et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Dongshi Zhang et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers

Caterina Credi et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Untitled

ADVANCED FUNCTIONAL MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Stimulus-active polymer actuators for next-generation microfluidic devices

Wolfgang Hilber

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

Add to Collection

Article Optics

Continuous multigram nanoparticle synthesis by high-power, high-repetition-rate ultrafast laser ablation in liquids

Rene Streubel et al.

OPTICS LETTERS (2016)

Add to Collection

Proceedings Paper Physics, Applied

Thermal and Mechanical Characteristics of Polymer Composites Based on Epoxy Resin, Aluminium Nanopowders and Boric Acid

B. Nazarenko et al.

III ALL-RUSSIAN SCIENTIFIC AND PRACTICAL CONFERENCE ON INNOVATIONS IN NON-DESTRUCTIVE TESTING (SIBTEST 2015) (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Ligand Exchange Procedure for Bimetallic Magnetic Iron-Nickel Nanocrystals toward Biocompatible Activities

Xiang Mao et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

3D-Printable Antimicrobial Composite Resins

Jun Yue et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Multidisciplinary Sciences

Designing bioinspired composite reinforcement architectures via 3D magnetic printing

Joshua J. Martin et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Solid solution magnetic FeNi nanostrand-polymer composites by connecting-coarsening assembly

Stephan Barcikowski et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Add to Collection

Article Physics, Applied

The magnetic properties of well-aligned nickel nanochains synthesized by magnetic field-induced assembly approach

Zhaoxia Kou et al.

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of One-Dimensional Chain of Iron-Based Bimetallic Alloying Nanoparticles with Unique Magnetizations

Ying Liang et al.

CRYSTAL GROWTH & DESIGN (2014)

Add to Collection

Review Nanoscience & Nanotechnology

Current state of laser synthesis of metal and alloy nanoparticles as ligand-free reference materials for nano-toxicological assays

Christoph Rehbock et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

alpha-Fe2O3 nanochains: ammonium acetate-based ionothermal synthesis and ultrasensitive sensors for low-ppm-level H2S gas

Jianmin Ma et al.

NANOSCALE (2013)

Add to Collection

Article Multidisciplinary Sciences

A microfibre assembly of an iron-carbon composite with giant magnetisation

Ying Liang et al.

SCIENTIFIC REPORTS (2013)

Add to Collection

Article Chemistry, Physical

CTAB-mediated synthesis of iron-nickel alloy nanochains and their magnetic properties

Xuegang Lu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

Add to Collection

Article Multidisciplinary Sciences

Composites Reinforced in Three Dimensions by Using Low Magnetic Fields

Randall M. Erb et al.

SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Facile removal of stabilizer-ligands from supported gold nanoparticles

Jose A. Lopez-Sanchez et al.

NATURE CHEMISTRY (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Green Chemistry: Principles and Practice

Paul Anastas et al.

CHEMICAL SOCIETY REVIEWS (2010)

Add to Collection

Article Chemistry, Physical

Gram Scale Synthesis of Pure Ceramic Nanoparticles by Laser Ablation in Liquid

Csaba Laszlo Sajti et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

Article Physics, Multidisciplinary

Magnetic-field-induced chain-like assembly structures of Fe3O4 nanoparticles

W. X. Fang et al.

EPL (2007)

Add to Collection

Article Physics, Multidisciplinary

Magnetic anisotropy and its temperature dependence in iron-rich FexPt1-x nanoparticles

C Antoniak et al.

EUROPHYSICS LETTERS (2005)

Add to Collection

Article Materials Science, Coatings & Films

Self-assembly and magnetism in core-shell microspheres

EL Bizdoaca et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.