☆ 4.8 Article

Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing - Insights using NiTi as a model alloy

ADDITIVE MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Heat transfer and melt flow of keyhole, transition and conduction modes in laser beam oscillating welding

Wenchao Ke et al.

Summary: This paper investigates the significant effects of melting modes on heat transfer and fluid flow in laser beam oscillating welding (LBOW), and their influence on welding quality and solidification microstructure. A computational fluid dynamics (CFD) model is developed to study LBOW of 2219 aluminum alloy under different welding modes. The results show that the melting mode changes from keyhole to conduction mode with increasing oscillating frequency. Our work provides a foundation for optimizing the LBOW process to achieve sound joints.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Chemistry, Physical

Grain size effect on the temperature-dependence of elastic modulus of nanocrystalline NiTi

Kangjie Chu et al.

Summary: The effect of grain size on temperature-dependent elastic modulus (TDEM) of polycrystalline NiTi was investigated. It was found that the TDEM decreased rapidly with smaller grain size. In-situ neutron diffraction and molecular dynamics simulation revealed that the reduction in grain size led to an increase in the volume fraction and thermal stability of the austenite phase at low temperature, resulting in two-phase coexistence during cooling. The compensation of the intrinsic opposite TDEM of austenite and martensite contributed to the overall reduced TDEM in nanocrystalline NiTi. This study suggests that the TDEM of shape memory alloy can be controlled by grain size.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Role of Pd interlayer on NiTi to Ti6Al4V laser welded joints: Microstructural evolution and strengthening mechanisms

Fissha Biruke Teshome et al.

Summary: Obtaining a reliable NiTi to Ti6Al4V dissimilar joint with NiTi's superelasticity can provide design flexibility in aerospace and biomedical fields. Adding Pd can limit the formation of Ti2Ni intermetallic compounds, resulting in improved mechanical properties and superelastic behavior of the NiTi-Ti6Al4V joint. The presence of Pd also leads to a decrease in the fraction of Ti2Ni and the dominance of Ti-Pd and NiTi compounds in the fusion zone.

MATERIALS & DESIGN (2023)

Add to Collection

Article Thermodynamics

Dynamic vapor and keyhole behavior, and equiaxed dendrite formation in blue laser processing of copper

Dongsheng Wu et al.

Summary: By developing a coupled Cu vapor and keyhole numerical model with virtual mesh refinement, the vapor and keyhole behavior in blue laser processing of copper material was investigated. EBSD was used to measure the crystal structure of the fusion zone. Cu vapor mainly flowed upwards above the keyhole, while some downward flows were observed inside the keyhole. The melt at the keyhole wall flowed downwards due to recoil force and Marangoni stress, and the melt at the pool edge flowed outwards due to Marangoni stress.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Chemistry, Physical

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

Lin Yu et al.

Summary: WAAM is a promising method for fabricating NiTi shape memory alloys with complex geometry, with this study depositing five layers of NiTi alloy using CMT welding. The research looked into the macroscopic morphology, microstructure evolution, phase transformation, and mechanical properties of each layer, revealing variations in grain structure and mechanical properties throughout the deposition process.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, Mechanical Properties, and Martensitic Transformation in NiTi Shape Memory Alloy Fabricated Using Electron Beam Additive Manufacturing Technique

Jan Dutkiewicz et al.

Summary: The electron beam additive manufacturing method was used to fabricate a rectangular NiTi component, producing a high-quality material with specific processes. Samples exhibited higher transformation temperatures and sharper transformation peaks after aging at 500 degrees C. In situ SEM tensile deformation experiments showed the formation of martensite at the sample surface and grain boundaries.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Real-time observation and numerical simulation of the molten pool flow and mass transfer behavior during wire arc additive manufacturing

Jiankang Huang et al.

Summary: This study used X-ray and VOF method to investigate the flow behavior of the molten pool in the WAAM process, revealing that controlling different wire feeding speeds can observe different droplet transfer modes. A 3D model of the molten pool was established, and it was found that the maximum flow velocity occurs within the plasma arc force action area.

WELDING IN THE WORLD (2022)

Add to Collection

Article Nanoscience & Nanotechnology

High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing

Mugong Zhang et al.

Summary: In this study, Ni-rich NiTi wire was used to deposit a wall-shaped NiTi component with a height of 130 mm on a Ti substrate using the cold metal transfer (CMT) based wire arc additive manufacturing (WAAM) process. The as-deposited NiTi alloy specimens exhibited exceptional superelastic properties with a very high recovery rate of over 90% after 25 cycles of testing in both horizontal and vertical directions. The mechanism behind the high superelasticity in the alloy was explored through microstructure, chemical composition, and phase transformation analyses.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of Phases and their Influence on Shape Memory Effect by Varying Sintering Parameters of NiTi Alloys

Swadhin Kumar Patel et al.

Summary: NITINOL is a popular and cost-effective shape memory alloy used in various industries. Utilizing powder technology route for manufacturing these SMAs can reduce post-processing, and the uniaxial press and sinter process can yield better density.

METALS AND MATERIALS INTERNATIONAL (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in multicomponent NiTi-based shape memory alloy using metallic glass as a precursor

Woo-Chul Kim et al.

Summary: This paper introduces a new alloy concept based on NiTi alloys, with both glass forming ability and shape memory characteristics. By suppressing the formation of brittle intermetallic compounds, the physical properties of shape memory alloys fabricated using glass precursor can be maximized. The structure and properties of multicomponent SMA systems are also discussed.

PROGRESS IN MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal process and material flow during dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys

W. C. Ke et al.

Summary: A computational fluid dynamics (CFD) model for double-sided friction stir spot welding (FSSW) between AZ31 and ZK60 magnesium alloys using adjustable pins is proposed. The model combines multiple phase flow theories and FLUENT software to track the metal interface and phase distribution. The calculated flow and thermal responses showed good agreement with experimental data. The study provides insights into the stages and phenomena that occur during the FSSW process.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A 3D arc-droplet-molten pool integrated model of Al alloy GMAW process: Heat transfer, fluid flow and the effect of external magnetic field

Wenyong Zhao et al.

Summary: The effect of external magnetic field (EMF) on the behavior of heat transfer and fluid flow in aluminum alloy fabrication process has been investigated. The study found that a moderate magnetic flux density of EMF can compress the arc plasma, decrease the average temperature of droplet metal, enhance the peak velocity of plasma, and expand the high-velocity plasma zone. The EMF also reduces the dimensions of the molten pool in the early stages of welding and significantly changes the flow pattern of liquid metal in the pool.

VACUUM (2022)

Add to Collection

Article Engineering, Manufacturing

Wire Arc Additive Manufacturing of NiTi 4D Structures: Influence of Interlayer Delay

Shalini Singh et al.

Summary: This study investigates how the interlayer delay affects the performance of WAAM-built nickel-titanium alloy structures and finds that longer delay time leads to grain refinement, thereby improving hardness, phase transformation temperature, compressive strength, and shape recovery behavior.

3D PRINTING AND ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Thermodynamics

Multi-physical modelling of alloy element transportation in wire arc additive manufacturing of a ?-TiAl alloy*

Jianwen Xin et al.

Summary: This research discusses the challenging issue of obtaining homogeneous element distribution in wire arc additive manufacturing (WAAM) of gamma-TiAl alloys, with a focus on the influence of wire transfer. A multi-physical numerical model is developed to consider dissimilar wire feeding and melting, as well as element mixing. High-speed video camera observations reveal that the transfer of Ti and Al elements to the molten pool is facilitated by a liquid TiAl bridge, but the stability of this bridge is not optimal, leading to potential breakup between the Al wire and liquid TiAl bridge. The wetting ability of the liquid TiAl metal on the Ti wire surface can serve as a predictor for bridge breakup, and surface tension hinders droplet transfer.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of microstructure, mechanical properties, and wear performance of NiTi alloy fabricated by cold metal transfer based wire arc additive manufacturing

Gaofeng Liu et al.

Summary: In this study, wall-shaped NiTi components were fabricated using cold metal transfer (CMT) based wire arc additive manufacturing (WAAM) with optimized depositing speed. The microstructure, mechanical properties, and wear performance of the as-fabricated specimens were investigated, and the correlations between them were analyzed. The results showed that the depositing speed had a significant influence on the microstructure, mechanical properties, and wear resistance of the NiTi components. The optimized CMT process provided a promising approach for producing homogeneous and flexible NiTi structures.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Chemistry, Physical

Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing

N. Resnina et al.

Summary: The study utilized GMAW and WAAM processes to deposit NiTi alloy on a Titanium substrate, evaluating the heterogeneity in terms of microstructure and composition across different layers, and analyzing its influence on martensitic transformation temperatures.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Optics

Molten pool characteristics of a nickel-titanium shape memory alloy for directed energy deposition

Shiming Gao et al.

Summary: The paper discusses the fabrication of nickel-titanium shape memory alloy through additive manufacturing, focusing on the impact of process parameters in directed energy deposition on the final properties. A three-dimensional numerical model was developed to simulate the characteristics of the molten pool, and comparisons between experimental and simulated results were made to illustrate the critical role of factors such as laser power and fluid velocity. The model is expected to aid in the optimization of the manufacturing process and prediction of grain structure.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Industrial

The effect of wire size on high deposition rate wire and plasma arc additive manufacture of Ti-6Al-4V

Chong Wang et al.

Summary: By studying the effects of wire size, current, nozzle size, and wire feeding position on the deposition rate, bead shape, and keyhole behavior, it was found that the deposition rate increases linearly with wire size, resulting in different characteristics of bead geometry; the formation of keyhole is influenced by current and nozzle size, and can be reduced by using thicker wires; wire feeding position plays a significant role in metal transfer mode and bead shape stability, with thin wires being more sensitive to changes in wire feeding position.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Review Thermodynamics

Buoyancy-driven flows beyond the Boussinesq approximation: A brief review

Peyman Mayeli et al.

Summary: This review paper discusses various methods for numerical simulation of laminar natural convection, including Boussinesq and nonBoussinesq approximations, classified into compressible and incompressible categories.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Optics

Numerical study on molten pool dynamics and solute distribution in laser deep penetration welding of steel and aluminum

Xigui Xie et al.

Summary: A 3D transient numerical model was developed to study the molten pool behavior and transmission mechanism during laser welding of dissimilar metals. The stability of the keyhole depends on the dynamic balance between the recoil pressure and the surface tension, and welding parameters significantly affect the transition layer thickness and element distribution.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Effects of process parameters on bead shape, microstructure, and mechanical properties in wire plus arc additive manufacturing of Al0.1CoCrFeNi high-entropy alloy

Md R. U. Ahsan et al.

Summary: This study investigates the wire + arc additive manufacturing of a high-entropy alloy and identifies near-optimal process parameters through a two-stage experiment. The research reveals the threshold of energy density for uniform and continuous bead formation, as well as the superior performance of deposits produced under high heat input conditions.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Review Computer Science, Interdisciplinary Applications

Measurement and Mitigation of Residual Stress in Wire-Arc Additive Manufacturing: A Review of Macro-Scale Continuum Modelling Approach

Shekhar Srivastava et al.

Summary: This study focuses on the critical review of multi-physics continuum modeling of wire-arc additive manufacturing (WAAM) at a macro-scale level, including discussions on thermo-mechanical models, simulation results, and residual stress/distortion mitigation techniques. It provides a framework for future research directions in WAAM.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal deposition

M. Froend et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Thermodynamics

Heat transfer, fluid flow and electromagnetic model of droplets generation and melt pool behaviour for wire arc additive manufacturing

S. Cadiou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Multidisciplinary Sciences

The role of side-branching in microstructure development in laser powder-bed fusion

Minh-Son Pham et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Manufacturing

Determination of the control points for circle and triangle route in wire arc additive manufacturing (WAAM)

W. Ou et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures

Jun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Mechanical

Toward low and high cycle fatigue behavior of SLM-fabricated NiTi: Considering the effect of build orientation and employing a self-heating approach

Parisa Bayati et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Industrial

Metal transfer modes in plasma Wire plus Arc additive manufacture

Sergio Rios et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing

Jun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Optics

Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy

Mehrshad Mehrpouya et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Optics

Grain size evolution under different cooling rate in laser additive manufacturing of superalloy

Jiayun Shao et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Selective electron beam melting of NiTi: Microstructure, phase transformation and mechanical properties

Quan Zhou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Engineering, Manufacturing

Droplet transfer behavior in bypass-coupled wire arc additive manufacturing

Jiankang Huang et al.

Journal of Manufacturing Processes (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing

Xuxiao Li et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Construction & Building Technology

Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization

Moslem Shahverdi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Thermodynamics

Metal transfer in wire feeding-based electron beam 3D printing: Modes, dynamics, and transition criterion

Renzhi Hu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Characterization of molten pool behavior and humping formation tendency in high-speed gas tungsten arc welding

Xiangmeng Meng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Numerical analysis of heat transfer and fluid flow in multilayer deposition of PAW-based wire and arc additive manufacturing

Xingwang Bai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Engineering, Industrial

Influence of pulsed arc on the metal droplet deposited by projected transfer mode in wire-arc additive manufacturing

Luo Yi et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Physics, Applied

Study on factors affecting the droplet temperature in plasma MIG welding process

Sarizam Bin Mamat et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Thermodynamics

Thermal behavior and fluid flow during humping formation in high-speed full penetration gas tungsten arc welding

Xiangmeng Meng et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Welding and Joining of NiTi Shape Memory Alloys: A Review

J. P. Oliveira et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Ceramics

Numerical Analysis of the NiTi Solidification Process Influence of Thermal Conductivity

Primoz Ternik et al.

SCIENCE OF SINTERING (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Material properties of CMT-metal additive manufactured duplex stainless steel blade-like geometries

Gerhard Posch et al.

WELDING IN THE WORLD (2017)

Add to Collection

Article Thermodynamics

Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures

Jun Xiong et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Review Engineering, Mechanical

Defect Formation Mechanisms in Selective Laser Melting: A Review

Bi Zhang et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Fabrication of NiTi through additive manufacturing: A review

Mohammad Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of molten pool behavior and weld bead formation in VP-GTAW by numerical modelling

Jiajing Pan et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Materials Science, Multidisciplinary

On the role of melt flow into the surface structure and porosity development during selective laser melting

Chunlei Qiu et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Automation & Control Systems

Arc profile characteristics of Al alloy in double-pulsed GMAW

Anhua Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Industrial

Numerical simulation of molten pool dynamics in high power disk laser welding

Won-Ik Cho et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Review Materials Science, Multidisciplinary

Manufacturing and processing of NiTi implants: A review

Mohammad H. Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2012)

Add to Collection

Article Materials Science, Multidisciplinary

TIG and A-TIG welding experimental investigations and comparison to simulation Part 1: Identification of Marangoni effect

A. Berthier et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.