☆ 4.5 Article

An environmentally benign approach for the synthesis of low molar mass polybutenes from mixed C4 monomers using AlCl3/ionic-liquid initiating systems

MOLECULAR CATALYSIS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Chain Walking in the AlCl3 Catalyzed Cationic Polymerization of α-Olefins

Amene Rahbar et al.

Summary: The basic mechanisms of 1-decene polymerization using a safer AlCl3 catalyst were revealed. The use of toluene solvent resulted in the synthesis of low molecular weight, low viscosity, and highly branched polyalphaolefins. NMR analysis confirmed the presence of various short chain branches and toluene rings in the final polymer chains. Molecular modeling confirmed the ease of carbocation isomerization and chain transfer mechanisms in toluene medium, supporting the experimental observations.

CHEMPLUSCHEM (2023)

Add to Collection

Review Polymer Science

Oligomerization of higher α-olefins to poly(α-olefins)

Ahad Hanifpour et al.

Summary: Poly(alpha-olefin) (PAO) synthetic lubricants have gained significant attention in recent years, with a focus on developing new catalysts for precise control of structure and properties. Research is ongoing to find green catalysts for producing low-viscosity PAOs, which are a major market segment, while also exploring the relationship between PAO structure and performance.

IRANIAN POLYMER JOURNAL (2022)

Add to Collection

Article Chemistry, Applied

Effect of support hydrophobicity of halloysite-based catalysts on the polyalphaolefin hydrofinishing performance

Arash Shams et al.

Summary: This research investigates the effect of surface hydrophobicity of halloysite clay on the hydrogenation efficiency of polyalphaolefins (PAOs). Catalysts were prepared by palladation of halloysite, treatment with cetrimonium bromide (CTAB), and subsequent palladation. Experimental and computational studies reveal that the presence of CTAB decreases the activity of the catalyst, and the order of Pd and CTAB introduction influences the content, particle size, and catalytic activity of the catalysts. The most active catalyst was found to be Hal/Pd, achieving 98% hydrogenation of PAO.

APPLIED ORGANOMETALLIC CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

An efficient initiator system containing AlCl3 and supported ionic-liquid for the synthesis of conventional grade polyisobutylene in mild conditions

Saleh Yousefi et al.

Summary: Ionic liquid based systems were used to facilitate the cationic polymerization of isobutylene. The AlCl3/S-IL initiator system was found to be a safer and greener alternative to the industrially used BF3 system. The microstructure and properties of the synthesized polyisobutylene were analyzed and compared, and DFT calculations were performed to investigate the catalyst interaction and sequestering in different systems.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Effect of polymer structure and chemistry on viscosity index, thickening efficiency, and traction coefficient of lubricants

Pawan Panwar et al.

Summary: This study investigates the impact of molecular chemistry and structure on performance metrics in lubricants using molecular dynamics simulations. The relationships between viscosity index, thickening efficiency, and traction coefficient with molecular properties are revealed through experimental validation and simulation calculations. Moreover, simple empirical models are developed based on the simulation results for rapid prediction of lubricant performance metrics.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Multidisciplinary Sciences

Heteroployacid on the composite of boehmite and polyionic liquid as a catalyst for alcohol oxidation and tandem alcohol oxidation Knoevenagel condensation reactions

Neda Abedian-Dehaghani et al.

Summary: In this study, a bi-functional catalytic composite was prepared using boehmite as an available and low-cost natural compound. The catalyst showed high catalytic activity for alcohol oxidation and one-pot tandem reactions, and exhibited true heterogeneous nature. It could be easily recovered and reused for multiple runs with minimal loss of activity and leaching of phosphotungstic acid.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Multidisciplinary Sciences

Pd on cyclotriphosphazen-hexa imine decorated boehmite as an efficient catalyst for hydrogenation of nitro arenes under mild reaction condition

Samahe Sadjadi et al.

Summary: In this study, a novel heterogeneous catalyst with high catalytic activity and selectivity was successfully synthesized for the hydrogenation of nitro arenes. The catalyst showed excellent recyclability and only catalyzed the reduction of nitro groups in the substrates.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Polymer Science

Silica gel supported ionic liquids as effective and reusable catalysts for the synthesis of highly reactive polyisobutylene in non-polar media

Ivan A. Berezianko et al.

Summary: Silica gel supported ionic liquid catalysts (SILCs) showed excellent activity and selectivity in the polymerization reaction. The addition of fresh catalysts after each polymerization run allowed for the retention of high catalytic activity, enabling multiple successful polymerization cycles.

POLYMER CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Efficient hydro-finishing of polyalfaolefin based lubricants under mild reaction condition using Pd on ligands decorated halloysite

Mahtab Tabrizi et al.

Summary: A novel catalyst was designed and fabricated for efficient hydrofinishing of polyalfaolefin based lubricants, showing excellent activity under mild reaction conditions and recyclability. The catalyst contained tiny Pd nanoparticles homogeneously dispersed on functionalized halloysite, with insignificant Pd leaching and loss of activity over multiple cycles.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Production of polyalfaolefin-based lubricants using new (poly)ionic liquid/AlCl3 catalysts as environmentally friendly alternatives to commercial AlCl3 route

Miad Mashayekhi et al.

Summary: By synthesizing new (poly)ionic liquid/AlCl3 catalysts, the dosage of corrosive AlCl3 in polyalphaolefin production has been reduced, resulting in the production of polyalphaolefins with the same KV100 but higher VI values.

APPLIED CATALYSIS A-GENERAL (2021)

Add to Collection

Article Chemistry, Physical

The effect of ionic liquid containing AlCl3 catalytic systems on the microstructure and properties of polyalphaolefin based lubricants

Mahtab Tabrizi et al.

Summary: A new class of ionic liquid containing AlCl3 catalysts was synthesized and used in 1-decene oligomerization to produce PAOs, offering a less-toxic alternative to traditional AlCl3 and BF3 catalysts. Different alkyl chlorides were employed to tune the catalytic efficiency, resulting in PAOs with varying microstructure and flow properties. The use of IL/AlCl3 system with reduced AlCl3 loading and proper selection of IL ligand allowed for control of PAO microstructure, showcasing significant achievements in the suggested catalytic systems.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Polymer Science

High Double Bond Content of Polyisoprene Synthesis via Cationic Polymerization Synergistically Catalyzed by Tf2NH-Ionic Liquids

Guangqian Zhu et al.

Summary: The highly efficient and selective cationic polymerization of isoprene was achieved using a synergistic Tf2NH-ionic liquid (IL) catalytic system, leading to low-molecular-weight polyisoprenes with excellent yields, double bond content, and trans-1,4 selectivities. The IL cation effectively suppressed double bond reprotonation in polymer chains by reducing electron density, resulting in highly linear desired polymers, with potential for industrial application and recycling processes.

MACROMOLECULES (2021)

Add to Collection

Review Engineering, Chemical

A Bibliometric Survey on Polyisobutylene Manufacture

Jessica B. Y. Alves et al.

Summary: Polyisobutylenes are versatile polymer materials used mainly as fuel and lubricant additives. The commercial demand for highly reactive polyisobutylene products has driven the development of new processes to produce PIBs with high polymer yields, narrow molar mass distributions, and high vinyl contents.

PROCESSES (2021)

Add to Collection

Article Energy & Fuels

Preparation of Lubricant Base Stocks with High Viscosity Index through 1-Decene Oligomerization Catalyzed by Alkylaluminum Chloride Promoted by Metal Chloride

Huaiqi Shao et al.

ENERGY & FUELS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in catalytic chain transfer polymerization of isobutylene: a review

Tota Rajasekhar et al.

RSC ADVANCES (2020)

Add to Collection

Article Polymer Science

Cationic Polymerization of Isobutylene and C4 Mixed Feed Using Complexes of Lewis Acids with Ethers: A Comparative Study

Dmitriy I. Shiman et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Borenium Ionic Liquids as Alternative to BF3 in Polyalphaolefins (PAOs) Synthesis

James M. Hogg et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Pd nanoparticles stabilized on the Schiff base-modified boehmite: Catalytic role in Suzuki coupling reaction and reduction of nitroarenes

Nuray Yilmaz Baran et al.

JOURNAL OF ORGANOMETALLIC CHEMISTRY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Triple Function Lubricant Additives Based on Organic-Inorganic Hybrid Star Polymers: Friction Reduction, Wear Protection, and Viscosity Modification

Bas G. P. van Ravensteijn et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Mechanical

Contribution of Viscosity Index Improver to Fuel Economy

Yasuaki Inoue et al.

TRIBOLOGY ONLINE (2019)

Add to Collection

Article Engineering, Mechanical

Pressure- and Temperature-Dependent Viscosity Measurements of Lubricants With Polymeric Viscosity Modifiers

Babak LotfizadehDehkordi et al.

FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND (2019)

Add to Collection

Article Engineering, Chemical

High Surface Area Nano-Boehmite as Effective Nano-Filler for Preparation of Boehmite-Polyamide-6 Nanocomposites

Gholamhossein Mohammadnezhad et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Applied

Zirconium oxide complex anchored on boehmite nanoparticles as highly reusable organometallic catalyst for C-S and C-O coupling reactions

Arash Ghorbani-Choghamarani et al.

APPLIED ORGANOMETALLIC CHEMISTRY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis and characterization of gamma-AlOOH/PVA composite granules for Cr(VI) adsorption

The Ky Vo et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2018)

Add to Collection

Article Polymer Science

Acidic imidazole-based ionic liquids in the presence of diisopropyl ether as catalysts for the synthesis of highly reactive polyisobutylene: Effect of ionic liquid nature, catalyst aging, and sonication

Ivan A. Berezianko et al.

POLYMER (2018)

Add to Collection

Review Engineering, Chemical

Review of Viscosity Modifier Lubricant Additives

Ashlie Martini et al.

TRIBOLOGY LETTERS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Supported Ionic Liquids: A Versatile and Useful Class of Materials

Vincenzo Campisciano et al.

CHEMICAL RECORD (2017)

Add to Collection

Article Polymer Science

New catalysts for the synthesis of highly reactive polyisobutylene: chloroaluminate imidazole-based ionic liquids in the presence of diisopropyl ether

Irina V. Vasilenko et al.

POLYMER CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Liquid coordination complexes: a new class of Lewis acids as safer alternatives to BF3 in synthesis of polyalphaolefins

James M. Hogg et al.

GREEN CHEMISTRY (2015)

Add to Collection

Article Polymer Science

Synthesis of highly reactive polyisobutylene with FeCl3/ether complexes in hexane; kinetic and mechanistic studies

Rajeev Kumar et al.

POLYMER CHEMISTRY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in the Lewis acid co-initiated cationic polymerization of isobutylene and 1,3-dienes

Sergei V. Kostjuk

RSC ADVANCES (2015)

Add to Collection

Article Polymer Science

Synthesis of boehmite and its effect on flame retardancy of epoxy resin

Tao Sun et al.

HIGH PERFORMANCE POLYMERS (2015)

Add to Collection

Article Polymer Science

Alkylaluminum dichloride-ether complexes which are fully soluble in hydrocarbons as catalysts for the synthesis of exo-olefin terminated polyisobutylene at room temperature

Irina V. Vasilenko et al.

POLYMER CHEMISTRY (2014)

Add to Collection

Article Polymer Science

Copolymerization of ethylene with alpha-olefins and cyclic olefins catalyzed by a Ti(IV) diisopropoxy complex bearing a tridentate [O-,S,O-]-type bis(phenolato) ligand

Giuseppe Leone et al.

POLYMER CHEMISTRY (2014)

Add to Collection

Article Polymer Science

Cationic Polymerization of Isobutylene at Room Temperature

Sergei V. Kostjuk et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)

Add to Collection

Article Polymer Science

Cationic polymerization of isobutylene by AlCl3/ether complexes in non-polar solvents: Effect of ether structure on the selectivity of β-H elimination

Dmitriy I. Shiman et al.

POLYMER (2013)

Add to Collection

Article Polymer Science

Highly reactive polyisobutylenes via AlCl3OBu2-coinitiated cationic polymerization of isobutylene: Effect of solvent polarity, temperature, and initiator

Irina V. Vasilenko et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2012)

Add to Collection

Article Environmental Sciences

Dechlorinating transformation of propachlor through nucleophilic substitution by dithionite on the surface of alumina

Chengshuai Liu et al.

JOURNAL OF SOILS AND SEDIMENTS (2012)

Add to Collection

Article Polymer Science

Synthesis of highly reactive polyisobutylenes with BF3•cyclohexanol initiating system

Lai-bao Zhang et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2011)

Add to Collection

Article Polymer Science

Mechanism of Isomerization in the Cationic Polymerization of Isobutylene

Philip Dimitrov et al.

MACROMOLECULES (2011)

Add to Collection

Article Polymer Science

A cost-effective process for highly reactive polyisobutylenes via cationic polymerization coinitiated by AlCl3

Qiang Liu et al.

POLYMER (2010)

Add to Collection

Article Polymer Science

Relative reactivity of C4 olefins toward the polyisobutylene cation

Priyadarsi De et al.

MACROMOLECULES (2006)

Add to Collection

Article Polymer Science

Polyisobutylene-based biomaterials

JE Puskas et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2004)

Add to Collection

Review Polymer Science

Application of ionic liquids as solvents for polymerization processes

P Kubisa

PROGRESS IN POLYMER SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.