☆ 4.4 Review

Potential Use of Sustainable Industrial Waste Byproducts in Fired and Unfired Brick Production

ADVANCES IN CIVIL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Laboratory-testing and industrial scale performance of different clays from eastern Morocco for brick manufacturing

Aboubakr El Hammouti et al.

Summary: This study investigates the use of unfired and fired soil materials for sustainable buildings in eastern Morocco. Geotechnical tests and analysis revealed high clay content and medium plasticity in the soil samples. The thermal conductivity and compressive strength of the unfired solid clay brick were found to vary between 0.77-1.07 W.m-1K-1 and 1.7-2.4 MPa respectively. The firing process of the hollow clay bricks significantly increased thermal and mechanical resistance. The study suggests that a combination of unfired solid clay bricks and fired hollow clay bricks can provide thermal comfort for sustainable buildings.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Rheological and physico-mechanical investigations on the destabilization of unfired clay bricks with almond husk additive by salt

Othmane Noureddine et al.

Summary: This research investigates the influence of different salt concentrations on unfired clay bricks incorporating almond husk powder. Through rheological and physicomechanical investigations, the storage modulus and elasticity potential of the material are determined. The utilization of washed clay and incorporation of almond husk powder leads to the production of stronger bricks with improved strength quality.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Engineering, Civil

Recycle of ground granulated blast furnace slag and fly ash on eco-friendly brick production

Okan Surul et al.

Summary: This study investigates the properties of bricks containing clay, ground granulated blast furnace slag (GGBS), and fly ash (FA) at different temperatures. The results show that an increase in firing temperature leads to decreased porosity and increased bulk density and compressive strength of the bricks. The addition of FA increases porosity and water absorption but reduces bulk density, compressive strength, and thermal conductivity of the bricks. GGBS content has minimal influence on the properties except for a significant increase in compressive strength. The use of industrial by-products as replacements for clay in bricks can provide eco-friendly alternatives and help reduce environmental impact.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2022)

Add to Collection

Review Construction & Building Technology

Additive manufacturing of clay and ceramic building components

Alexander Wolf et al.

Summary: Additive manufacturing techniques have been making their way into the construction sector over the past 30 years, with a focus on 3D-printed concrete or steel structures. However, research in the field of ceramic 3D printing for construction applications is lagging behind. This review compares work completed in this field and contextualizes the topic in relation to 3D printing and ceramic building materials.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Review Construction & Building Technology

Lightweight concrete from a perspective of sustainable reuse of waste byproducts

Muhammad Faisal Junaid et al.

Summary: Traditional waste management schemes have various environmental, social, and economic concerns, leading to the need for productive replacements. Lightweight concrete (LWC) has gained popularity due to its low density and environmental properties. There is vast potential in utilizing various waste byproducts in LWC, which requires further research and focus in this field.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Environmental Sciences

Thermal performance of energy-efficient buildings for sustainable development

Dhanasingh Sivalinga Vijayan et al.

Summary: The thermal performance of civil structures is crucial in civil engineering and architecture, impacting residents' comfort levels and energy efficiency. Designing buildings according to thermal comfort and reducing carbon emissions, air flows, and energy consumption is essential. Different types of buildings, including residential, commercial, and educational structures, were analyzed for their thermal performance in various climatic conditions.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Engineering, Multidisciplinary

Compressed unfired blocks made with iron ore tailings and slag

H. K. Thejas et al.

Summary: The growing demand for construction materials in urban India has led to increased research on sustainable alternatives to traditional brick manufacturing methods, which are not environmentally friendly. This study focused on utilizing mining waste, specifically iron ore tailing, in the development of stable blocks. The addition of ground granulated blast furnace slag and lime proved to be effective in stabilizing the iron ore tailing and improving the properties of the blocks. This research demonstrates that the developed blocks meet the required specifications and can be used in various applications.

COGENT ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Agricultural waste management strategies for environmental sustainability

Bhupendra Koul et al.

Summary: Globally, large amounts of agricultural wastes are generated daily, needing strategies for timely utilization to achieve agricultural sustainability and ensure food and health security. These wastes come from various sources such as crop residue, agro-industries, livestock, and aquaculture, with their management and utilization being a global issue.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Synergistic effect on the performance of ash-based bricks with glass wastes and granite tailings along with strength prediction by adopting machine learning approach

Selvaraj Praburanganathan et al.

Summary: The study proposes a sustainable method of utilizing wastes from granite and glass industries in brick manufacturing, and recommends using machine learning algorithms to predict the brick strength. The use of granite tailings and glass waste together reduces the fly ash requirement and increases the brick strength.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Decarbonizing the ceramics industry: A systematic and critical review of policy options, developments and sociotechnical systems

Dylan D. Furszyfer Del Rio et al.

Summary: Ceramics have significant negative impacts on natural and social systems throughout their lifecycle, including energy consumption and carbon emissions. This article reviews 324 studies to identify alternative solutions and promising research directions for mitigating the climate effects of the ceramics industry.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Behind the Manufacturing of Industrial Clay Bricks: Drying Stage Predictions Using CFD

R. S. Santos et al.

Summary: This study simulated the drying process of industrial clay brick in an oven using computational fluid dynamics, and analyzed the drying and heating kinetics, moisture content, and temperature distribution of the product. The results showed a good agreement with experimental data and validated the proposed mathematical modeling. Additionally, the numerical results indicated that increasing drying-air temperature and decreasing relative humidity result in higher heating and moisture removal rates.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Biology

Recycling rice straw ash to produce low thermal conductivity and moisture-resistant geopolymer adobe bricks

Mohamed Morsy et al.

Summary: The study showed that the optimal performance of adobe bricks can be achieved at 10% sodium hydroxide and 20% rice straw ash. Increasing the rice straw ash content can enhance compressive strength while reducing bulk density, water absorption, and thermal conductivity. Increasing the sodium hydroxide content can increase bulk density and compressive strength while decreasing water absorption.

SAUDI JOURNAL OF BIOLOGICAL SCIENCES (2022)

Add to Collection

Article Construction & Building Technology

Mechanical Properties of Plastic Sand Brick Containing Plastic Waste

Kameshwar Sahani et al.

Summary: The extensive use of plastic in modern society has brought about environmental pollution issues. Research shows that plastic sand bricks as an alternative have feasibility, but the strength is influenced by the mixture ratio.

ADVANCES IN CIVIL ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Alkali-activated bricks made with mining waste iron ore tailings

H. K. Thejas et al.

Summary: The rapid growth in India's housing sector has created pressure on construction materials like bricks, leading researchers to seek alternative production methods. This study proposes the use of mining waste iron ore tailing (IOT) in alkali-activated bricks, resulting in bricks with good strength and durability.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Use of hazardous electric arc furnace dust in the construction industry: A cleaner production approach

Abhilash T. Nair et al.

Summary: Many steel industries are adopting electric arc furnace (EAF) technology to recycle steel and reduce greenhouse gas emissions. However, the co-production of slag and dust (EAFD) is a major issue. This paper discusses the environmental impact of EAFD production, analyzes its incorporation in various construction components, and provides insights into its morphology and chemical composition. The study shows that EAFD can improve the performance of building materials and suggests its reuse as a supplementary material for sustainable construction.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Perspective review on Municipal Solid Waste-to-energy route: Characteristics, management strategy, and role in circular economy

Anh Tuan Hoang et al.

Summary: The proper handling of Municipal Solid Waste (MSW) is crucial for minimizing environmental impacts and transforming the linear economy model into a circular one. This review analyzes and categorizes MSW to energy technologies from a Circular Economy perspective. The direct approach involves incineration for heat recovery while the indirect approach includes thermochemical and biochemical processes, which produce a variety of valuable products. However, there is no consensus on the best MSW treatment approach due to inconsistent assessment criteria. This study scrutinizes the critical characteristics of MSW to energy technologies and evaluates their economic aspects and role in the circular bio-economy.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Opportunities and challenges for the waste management in emerging and frontier countries through industrial symbiosis

Efrain A. Boom Carcamo et al.

Summary: The development of industrial and commercial activities in developing countries has led to an increase in waste generation, resulting in complex waste management issues. Industrial symbiosis has emerged as a strategy to utilize waste in a productive chain through physical exchanges of materials and waste. However, emerging and frontier countries face challenges in solid waste management due to the lack of sustainability-focused policies, communication and trust issues among stakeholders, and technological barriers.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Properties of using excavated soil waste as fine and coarse aggregates in unfired clay bricks after dry-wet cycles

Jinjun Xu et al.

Summary: This paper investigated the physical and mechanical properties of excavated soil-based unfired clay bricks (ESUCB) with different mix proportions before and after dry-wet cycles. The results showed that increasing the dry-wet cycle number leads to larger mass loss, higher strength reduction rate and reduce the compressive strength of ESUCB. Different mix proportions were provided for specific compressive strength requirements.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Experimental study effect of bottom ash and temperature of firing on the properties, microstructure and pore size distribution of clay bricks: A Lithuania point of view

Inna Pitak et al.

Summary: The study examines the feasibility of reusing bottom ash in clay brick production. The results show that the addition of bottom ash changes the physical and mechanical properties of the bricks, increasing porosity and water absorption. It is recommended to add a specific proportion of bottom ash to the clay body and fire at an appropriate temperature for optimal results. The use of bottom ash reduces the consumption of natural resources without compromising the quality of the bricks.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

Add to Collection

Article Mathematical & Computational Biology

Analysis of Agriculture and Food Supply Chain through Blockchain and IoT with Light Weight Cluster Head

Anass Hamadelneel Adow et al.

Summary: This article discusses the projected increase in the global population by 2050 and the need for a 70% increase in food production. It proposes using blockchain technology to improve supply chain transparency and quality, and suggests using smart models and IoT devices to monitor crop data to address supply chain challenges.

COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE (2022)

Add to Collection

Review Engineering, Environmental

A systematic review of factors affecting properties of thermal-activated recycled cement

Lei Xu et al.

Summary: This paper summarizes the research on thermal-activated recycled cement (RC) and analyzes the factors affecting its properties and the optimal production methods. The findings confirm that RC can serve as a sustainable solution for the development of the construction industry.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Review Environmental Sciences

Characterization of laterite soil and its use in construction applications: A review

G. Santha Kumar et al.

Summary: Laterisation is a natural process influenced by atmospheric and geological conditions, resulting in laterite soil which can be utilized as an alternative material in the construction sector for sustainable development.

RESOURCES CONSERVATION & RECYCLING ADVANCES (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A comprehensive review on the use of sugarcane bagasse ash as a supplementary cementitious material to produce eco-friendly concretes

Ibrahim Saad Agwa et al.

Summary: This paper provides a comprehensive review on the use of sugarcane bagasse ash (SCBA) as a supplementary cementitious material (SCMs) to produce eco-friendly concretes. The paper discusses the treatment, physical and chemical properties of SCBA, as well as its influence on concrete properties such as slump, mechanical properties, water absorption, porosity, and microstructure. The review suggests that the use of SCBA within an optimal replacement ratio range of 5%-10% can improve the mechanical properties of concrete.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Plastic-fly ash waste composites reinforced with carbon nanotubes for sustainable building and construction applications: A review

Boitumelo Makgabutlane et al.

Summary: The building and construction industry, as the largest consumer of natural resources, aims to achieve sustainability by utilizing waste materials in composites. This review focuses on the application of waste plastics and coal fly ash, as well as the use of nanomaterials such as carbon nanotubes to enhance the properties of these composites. The enhanced waste-derived composites are lightweight and strong, capable of withstanding harsh conditions.

RESULTS IN CHEMISTRY (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Fired and unfired clay bricks incorporating olive pomace: A comparative study

Aboubakr El Hammouti et al.

Summary: This study compares clay bricks made with local soil and olive pomace, showing that the addition of olive pomace can improve the thermal insulation of the bricks. The thermal conductivity of the clay bricks with 20% olive pomace reduced by 43.1-39.7% after baking, resulting in a significant increase in thermal resistance. Building-scale analysis demonstrated that walls made of clay-olive pomace composites can reduce heating and cooling loads.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Construction & Building Technology

Determination of Optimum Building Envelope Parameters of a Room concerning Window-to-Wall Ratio, Orientation, Insulation Thickness and Window Type

Ayse Fidan Altun

Summary: The building envelope significantly affects energy consumption. This study found optimal design parameters for the building envelope, such as insulation thickness, orientation, glazing type, and the window-to-wall ratio, to reduce energy consumption.

BUILDINGS (2022)

Add to Collection

Article

Embodied energy and operational energy computations for a typical G+3 residential building in Vijayawada city of Andhra Pradesh, India

Jagadish Vengala et al.

International Journal of Advanced Technology and Engineering Exploration (2021)

Add to Collection

Article Materials Science, Ceramics

Bonding mechanism and performance of rectorite/ball clay bonded unfired high alumina bricks

Xiaohui Li et al.

Summary: The study found that rectorite clay bonded bricks exhibit better bonding performance after drying, while ball clay bonded bricks show higher refractoriness under load and lower linear shrinkage at high temperatures.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Construction & Building Technology

Production and properties of lightweight concrete incorporating recycled waste crushed clay bricks

May M. Atyia et al.

Summary: This study investigated the recycling of waste crushed clay bricks in the concrete industry, finding that they can be used as substitutes for cement and aggregates to produce lightweight structural concrete with appropriate properties. Grinding the bricks also showed potential as a supplementary cementitious material to reduce cement content without significantly affecting concrete properties.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Optimisation of Compressed Earth Blocks (CEBs) using natural origin materials: A systematic literature review

Chiara Turco et al.

Summary: This paper conducted a systematic literature review on the optimization of Compressed Earth Blocks (CEBs) using natural origin materials and discussed the physical, thermal, mechanical, and durability properties. The research outcomes provide a theoretical basis for promoting the sustainable use of earth building materials by encouraging researchers to find new solutions for improving their properties.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Design and development of sustainable geopolymer using industrial copper byproduct

Khan Asudullah Khan et al.

Summary: This research identifies and investigates key design variables for Copper slag incorporated geopolymer mortar (CSGM), leading to the determination of optimal mix proportions and analysis of performance. Comparative results demonstrate better performance of CSGM over FAGM, providing valuable insights for geopolymer-based materials production.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Green & Sustainable Science & Technology

The potential of calcium carbide waste and termite mound soil as materials in the production of unfired clay bricks

Banjo Ayobami Akinyemi et al.

Summary: The study investigated the physical, mechanical, thermal, and microstructural properties of calcium carbide residue stabilized clay bricks from termite mound clay soil. It was found that incorporating 10% calcium carbide, 20% cement, and 0.1% chemical additive into termite mound clay soil can help in developing improved unfired clay bricks.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Physical

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete

Gonglian Chen et al.

Summary: This study investigated the thermal conductivity and mechanical properties of autoclaved aerated concrete (AAC) by focusing on the effect of pore structures. The research found that the pore size of AAC has an impact on its thermal conductivity, while it has little effect on compressive strength.

MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Utilization of Industrial By-Products/Waste to Manufacture Geopolymer Cement/Concrete

Numanuddin M. Azad et al.

Summary: In recent years, there has been a movement towards using industrial waste to produce geopolymer cement/concrete in order to reduce CO2 emissions. A literature review has shown that these geopolymer materials have demonstrated good mechanical properties and environmental benefits.

SUSTAINABILITY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Waste valorization of rice straw as a building material in Valencia and its implications for local and global ecosystems

Alberto Quintana-Gallardo et al.

Summary: The environmental implications of rice straw cultivation in Valencia have generated controversy. Using rice straw as a raw material for building products can reduce the environmental impact and provide a sustainable alternative for the building industry in the region.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mine Waste-Based Next Generation Bricks: A Case Study of Iron Ore Tailings, Red Mudand GGBS Utilization in Bricks

M. Beulah et al.

Summary: The utilization of mine wastes in the construction industry introduces environmental and sustainable concepts in civil engineering. This research proposes a cost-effective method for producing bricks by mixing red mud and iron ore tailings, showing better compressive strength values for iron ore tailings-based bricks. Various tests have been conducted to examine the physical and mechanical properties of the developed composites.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Properties of mortar incorporating untreated and treated drinking water treatment sludge

Phuong Ngoc Pham et al.

Summary: The study showed that treated sludge can be used as a substitute for sand in recycled construction materials, significantly improving the mechanical properties of the mixtures. Treated sludge also helps enhance the bond strength between mortar and bricks compared to untreated sludge.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Sustainable eco-friendly bricks from slate tailings through geopolymerization: synthesis and characterization analysis

Xin Kang et al.

Summary: The study investigates the production of eco-friendly building materials using slate tailings through geopolymerization, with the addition of fly ash and metakaolin to improve quality. Different ST contents, alkaline activator ratios, and curing times have significant effects on the compressive strength, density, and water absorption rate of the geopolymer brick. Optimum conditions for the brick samples are identified, meeting the Chinese Non-sintered Waste Tailing Brick Standard.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A review on alternative binders, admixtures and water for the production of sustainable concrete

Maria Cristina Collivignarelli et al.

Summary: In order to maintain its leading role, the concrete industry needs to address environmental issues and improve energy efficiency by using alternative fuels and materials. Research has shown that waste materials can be used as substitutes for concrete components, with ground granulated blast furnace slag (GGBFS) demonstrating the highest potential for enhancing overall performance.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

Influence of Glass Powder Incorporated Foamed Geopolymer Blocks on Thermal and Energy Analysis of Building Envelope

Ranjit J. Singh et al.

Summary: The study focuses on developing a new building material to improve energy efficiency and sustainability characteristics of buildings, achieved by incorporating glass powder and fly ash to produce alkali activated foamed material. Experimental results show that using this material can save energy demand and usage during the operational stage of the building, with significantly lower average temperature range in the fluid domain.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Combined effects of bayer process bauxite waste (red mud) and agricultural waste on technological properties of fired clay bricks

Ebubekir Atan et al.

Summary: The study explores the use of waste materials to produce eco-friendly porous ceramic bricks, reducing natural resource consumption and improving thermal insulation. Different waste combinations can effectively decrease density and mechanical strength while increasing porosity for better insulation.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Fabrication of thermal insulation geopolymer bricks using ferrosilicon slag and alumina waste

M. M. Ahmed et al.

Summary: The study focuses on the preparation of thermal insulation geopolymer bricks using ferrosilicon slag and alumina waste. Different NaOH concentrations and curing times were tested to determine the best compressive strength, with results showing that increasing alumina content enhances geopolymer properties but reduces compressive strength. A Si/Al ratio of 1 exhibited the highest compressive strength among different ratios after 28 days of curing at 8 M NaOH.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Add to Collection

Review Environmental Sciences

Life cycle assessment of sewage sludge treatment and disposal based on nutrient and energy recovery: A review

An Ding et al.

Summary: This review focuses on the environmental sustainability of urban sludge management schemes and the potential for resource recovery and energy savings through Life Cycle Assessment (LCA). Comparative analysis reveals differences in environmental impacts between existing and emerging technologies, highlighting the importance of addressing toxic effects and minimizing environmental damage in future LCA research.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Construction & Building Technology

Cementitious composites containing alum sludge ash: An investigation of microstructural features by an advanced nanoindentation technology

Yue Liu et al.

Summary: The study investigated the use of alum sludge ash (ASA) in cement-based composites, with varying percentages of 0%, 10%, 20%, and 30%. Results showed that the paste samples with 10% ASA exhibited higher pozzolanic reaction degree and homogenized indentation properties compared to those with 30% ASA. Excessive unreacted ASA may lead to a deterioration in the mechanical performance of the binder pastes.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effect of waste-based micro cellulose fiber as pore maker on characteristics of fired clay bricks

Cagrialp Arslan et al.

Summary: The study shows that the addition of waste micro cellulosic fiber can improve the thermal performance of clay bricks while reducing their mechanical performance, with the best results achieved with 2.5 wt% addition. A decrease of 70% in thermal conductivity value of the clay brick was observed when the added amount of waste CF reached 15 wt%.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Utilisation of nut shell wastes in brick, mortar and concrete: A review

Nusrat Jannat et al.

Summary: The construction sector's growth leads to rapid depletion of natural resources, while agricultural waste shows potential for use in building material production to reduce environmental impacts. Extensive research is needed to fully understand the potential of utilizing agricultural waste in construction materials.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Archaeology

Ovalbumin as natural organic binder for stabilizing unfired earth bricks: Understanding vernacular techniques to inspire modern constructions

K. A. J. Ouedraogo et al.

Summary: The study found that ovalbumin can replace cement and hydrated lime as a soil stabilizer, improving the compressive strength and water resistance of the soil, and performing well in hygrothermal properties.

JOURNAL OF CULTURAL HERITAGE (2021)

Add to Collection

Article Construction & Building Technology

Biomass bottom ash waste and by-products of the acetylene industry as raw materials for unfired bricks

D. Eliche-Quesada et al.

Summary: This research investigated the use of biomass bottom ash and Geosilex as raw materials in the production of unfired bricks, finding that optimal mechanical properties can be achieved with specific proportions of these materials. The recycling of these wastes in unfired bricks can lead to significant economic and environmental benefits.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Effectiveness of industrial waste materials used as ingredients in fly ash brick manufacturing

T. Balasubramaniam et al.

Summary: The study explores the feasibility of using other industrial waste materials to partially replace flyash in brick manufacturing, finding that this alternative solution can reduce flyash consumption, enhance brick performance, and contribute to environmental resource conservation.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Investigation of newly developed copper slag incorporated foamed geopolymer and its conjugate heat transfer analysis

Ranjit J. Singh et al.

Summary: The study focused on investigating a newly developed foamed geopolymer prepared from copper slag industry by-product as an alumina-silicate source material, which proved to be sustainable with features like high thermal efficiency, lightweight, and low heat transfer rate. Through comparative experiments, it was demonstrated that the developed material has advantages in preventing heat propagation, thus improving the comfort conditions for occupants.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Manufacturing of Ecofriendly Bricks Using Microdust Cotton Waste

Mebrahtom Teklehaimanot et al.

Summary: The study explores the potential use of cotton microdust to produce lightweight bricks for construction industries, and experimentally verifies its feasibility. The results show that using different ratios of cotton microdust can produce bricks that meet building standards, with high energy absorption capacity and lighter weight.

JOURNAL OF ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Effects of Industrial and Agricultural Wastes on Mud Blocks Using Geopolymer

N. P. Vignesh et al.

ADVANCES IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Design development of sustainable alkali-activated bricks

Hindavi R. Gavali et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Add to Collection

Review Construction & Building Technology

Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review

Rui He et al.

ADVANCES IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Geopolymer bricks made from less active waste materials

H. Madani et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Reuse of Clay Brick Waste in Mortar and Concrete

Lihua Zhu et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A Comparative Simulation Study of the Thermal Performances of the Building Envelope Wall Materials in the Tropics

Nusrat Jannat et al.

SUSTAINABILITY (2020)

Add to Collection

Review Construction & Building Technology

Application of agro and non-agro waste materials for unfired earth blocks construction: A review

Nusrat Jannat et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

A state of the art review to enhance the industrial scale waste utilization in sustainable unfired bricks

Vivek Gupta et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Durability and hygroscopic behaviour of biopolymer stabilised earthen construction materials

S. Muguda et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Engineering properties evaluation of unfired sludge bricks solidified by cement-fly ash-lime admixed nano-SiO2 under compaction forming technology

Lei Lang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Circular economy practices in the built environment

Tuomo Joensuu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Recycling of waste river sludge into unfired green bricks stabilized by a combination of phosphogypsum, slag, and cement

Yierfan Maierdan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Development of sustainable bricks using ash from co-fired sawdust and coal

Kunal Pradhan et al.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Performance Evaluation of Cost-Effective Non-autoclaved Aerated Geopolymer (NAAG) Blocks

Rupali B. Kejkar et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Utilization of Glass Powder and Oil Palm Fibers to Develop Thermally Efficient Blocks

Ashwin Narendra Raut et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

The potential of industrial waste: using foundry sand with fly ash and electric arc furnace slag for geopolymer brick production

Suchanya Apithanyasai et al.

HELIYON (2020)

Add to Collection

Article Construction & Building Technology

Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete

Jin-Guang Teng et al.

ADVANCES IN STRUCTURAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Influence of tea waste concentration in the physical, mechanical and thermal properties of brick clay mixtures

Savas Ozturk et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

Development of sustainable alkali-activated bricks using industrial wastes

Hindavi R. Gavali et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Smart technologies for promotion of energy efficiency, utilization of sustainable resources and waste management

Sandro Nizetic et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Construction & Building Technology

Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement

P. Munoz et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

MECHANICAL AND WATER TRANSPORT PERFORMANCE OF SUSTAINABLE GEOPOLYMER COMPOSITE USING BINARY BLENDS OF POZZOLANIC MATERIALS

Khan Asudullah Khan et al.

JURNAL TEKNOLOGI (2019)

Add to Collection

Review Construction & Building Technology

Incorporation of waste materials in the manufacture of masonry bricks: An update review

Amin Al-Fakih et al.

JOURNAL OF BUILDING ENGINEERING (2019)

Add to Collection

Article Multidisciplinary Sciences

Reuse of waste bricks: a new generation of geopolymer bricks

Nicolas Youssef et al.

SN APPLIED SCIENCES (2019)

Add to Collection

Review Construction & Building Technology

Towards sustainable bricks production: An overview

Anant L. Murmu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Thermally efficient fired clay bricks incorporating waste marble sludge: An industrial-scale study

Muhammad Junaid Munir et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

In-plant production of bricks containing waste foundry sand-A study with Belgaum foundry industry

Nabil Hossiney et al.

CASE STUDIES IN CONSTRUCTION MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Effectiveness of different recycled materials in self-compacting mortar

Ramin Amjadi et al.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Optimization of Mix Design of Thermally Efficient Blocks Using the Process Parameter Approach

Ashwin Narendra Raut et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Add to Collection

Review Green & Sustainable Science & Technology

A review on insulation materials for energy conservation in buildings

L. Aditya et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Use of paper mill waste for brick making

Raju Sarkar et al.

COGENT ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Fabrication of geopolymer bricks using ceramic dust waste

Sh. K. Amin et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Effect of pore shape on the thermal conductivity of partially saturated cement-based porous composites

Hedong Li et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Thermodynamics

Dynamic thermal performance of three types of unfired earth bricks

Faycal El Fgaier et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Review Materials Science, Ceramics

Recycling of industrial wastes in ceramic manufacturing: State of art and glass case studies

Fernanda Andreola et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Olive Stone Ash as Secondary Raw Material for Fired Clay Bricks

D. Eliche-Quesada et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Effect of sorption capacity on thermo-mechanical properties of unfired clay bricks

Faycal El Fgaier et al.

JOURNAL OF BUILDING ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Fired clay bricks using agricultural biomass wastes: Study and characterization

Cecile Bodes et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Thermodynamics

Effects of waste paper usage on thermal and mechanical properties of fired brick

Khalid S. Shibib

HEAT AND MASS TRANSFER (2015)

Add to Collection

Review Construction & Building Technology

On the production of fired clay bricks from waste materials: A critical update

Sergio Neves Monteiro et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Environmental Sciences

Use of coir pith particles in composites with Portland cement

Gisela Azevedo Menezes Brasileiro et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)

Add to Collection

Article Construction & Building Technology

Production of eco-friendly bricks from copper mine tailings through geopolymerization

Saeed Ahmari et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

Physico-mechanical and thermal performances of newly developed rubber-added bricks

Paki Turgut et al.

ENERGY AND BUILDINGS (2008)

Add to Collection

Article Energy & Fuels

Solar conduction heat transfer in fired clay bricks

E Custodio-García et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.