☆ 4.5 Article

Effect of surfactants on the properties of rubber composites prepared from pyrolytic carbon black/natural latex via wet blending method

FRONTIERS IN MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Polymer Science

Study on the Mechanism and Experiment of Styrene Butadiene Rubber Reinforcement by Spent Fluid Catalytic Cracking Catalyst

Tilun Shan et al.

Summary: This paper conducted a mechanistic and experimental study on the replacement of some carbon blacks by spent FCC catalysts for the preparation of rubber products and explored the synergistic reinforcing effect of spent catalysts and carbon blacks, providing theoretical support for the efficient reuse of spent catalysts and reducing environmental pollution.

POLYMERS (2023)

Add to Collection

Article Materials Science, Composites

Enhanced cross-linking performances and carbon black (CB) dispersion in solution styrene butadiene rubber (SSBR) filled with triazine-based graphdiyne (TGDY)

Chong Sun et al.

Summary: This study prepared triazine-based graphdiyne (TGDY) and incorporated it into the solution polymerized styrene butadiene rubber (SSBR) matrix filled with carbon black (CB). The results showed that TGDY can simultaneously promote the curing rate and cross-linking density of the rubber composites, as well as improve the dispersion of fillers in the rubber matrix.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

Waste resource utilization: Spent FCC catalyst-based composite catalyst for waste tire pyrolysis

Xiaolong Tian et al.

Summary: In this study, composite catalysts were used to improve the yield and quality of products obtained from the pyrolysis of waste tires. The heavy oil component in the composite catalyst enhanced interactions between the spent FCC catalysts and waste tires, leading to higher yield and improved quality of tire pyrolysis oil (TPO).

FUEL (2022)

Add to Collection

Article Chemistry, Analytical

Study of waste rubber catalytic pyrolysis in a rotary kiln reactor with spent fluid-catalytic-cracking catalysts

Xiaolong Tian et al.

Summary: This study aims to reduce the cost of catalytic pyrolysis of waste rubber by using spent FCC catalysts and to improve the quality and production efficiency of pyrolysis products through collaborative high-value reuse of waste rubber and spent FCC catalysts.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of pyrolysis carbon black from waste tires on the properties of styrene-butadiene rubber compounds

Sun-Mou Lai et al.

Summary: This study compared commercial pyrolysis carbon black (PCB) from waste tires with N660 carbon black in SBR compounds, finding that the ET black filler had higher viscosity and aggregation power in the rubber matrix. Increasing the ET black ratio led to a gradual decrease in tensile strength of SBR, but it could potentially replace 20% of N660 without significant impact. The influence on tear strength was marginal, but abrasion resistance decreased with higher ET black content.

POLYMERS & POLYMER COMPOSITES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

A novel approach of reapplication of carbon black recovered from waste tyre pyrolysis to rubber composites

Xiaolong Tian et al.

Summary: The conversion of waste tires into valuable fuel resources through pyrolysis is an attractive technology to address the issues of energy supply and environmental pollution. Pyrolysis carbon black (CBp) is the main secondary product of waste tire pyrolysis, with high value applications being a bottleneck for the industry. The ADSD method shows potential in improving the performance of CBp/rubber composites.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Physical

Aqueous carbon black dispersions stabilized by sodium lignosulfonates

Sreedhar Subramanian et al.

Summary: The study found that lignosulfonates with a low degree of sulfonation exhibit good carbon black dispersing properties, with dispersion efficiency not solely dependent on the amount adsorbed on the surface of carbon black. Lignosulfonates enhance colloidal stability through electrostatic repulsion, with the stabilization mechanism likely a combination of electrostatic repulsion and steric hindrance.

COLLOID AND POLYMER SCIENCE (2021)

Add to Collection

Article Materials Science, Composites

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application

Akarsh Verma et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Polymer Science

Optimization of Serial Modular Continuous Mixing Process Parameters for Natural Rubber Composites Reinforced by Silica/Carbon Black

Lin Zhu et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

Effect of Gear Pump Extrusion Processing on the Properties of Fiber Reinforced Rubber Composites

Xiaolong Tian et al.

POLYMERS (2020)

Add to Collection

Article Polymer Science

Surface Modification of Staple Carbon Fiber by Dopamine to Reinforce Natural Latex Composite

Xiaolong Tian et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Environmental

Templating synthesis of hierarchical porous carbon from heavy residue of tire pyrolysis oil for methylene blue removal

Yulin Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Characterization of Chemically Activated Pyrolytic Carbon Black Derived from Waste Tires as a Candidate for Nanomaterial Precursor

Reyna Berenice Gonzalez-Gonzalez et al.

NANOMATERIALS (2020)

Add to Collection

Article Environmental Sciences

The biodegradative effect of Tenebrio molitor Linnaeus larvae on vulcanized SBR and tire crumb

Mostafa G. Aboelkheir et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Engineering, Environmental

Carbon black recovery from waste tire pyrolysis by demineralization: Production and application in rubber compounding

Juan Daniel Martinez et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Energy & Fuels

Characterization and upgradation of crude tire pyrolysis oil (CTPO) obtained from a rotating autoclave reactor

Akhil Mohan et al.

FUEL (2019)

Add to Collection

Article Materials Science, Characterization & Testing

Influencing factors for vulcanization induction period of accelerator / natural rubber composites: Molecular simulation and experimental study

Meifang Wang et al.

POLYMER TESTING (2019)

Add to Collection

Article Engineering, Environmental

A potential utilization of end-of-life tyres as recycled carbon black in EPDM rubber

M. Sagar et al.

WASTE MANAGEMENT (2018)

Add to Collection

Article Polymer Science

EFFECT OF CARBON BLACK NATURE ON DYNAMIC MECHANICAL PROPERTIES AND REINFORCEMENT OF NR VULCANIZATION BY LATEX TECHNIQUES

An Dong et al.

RUBBER CHEMISTRY AND TECHNOLOGY (2017)

Add to Collection

Article Environmental Sciences

Assessment of Recovered Carbon Black Obtained by Waste Tires Steam Water Thermolysis: An Industrial Application

L. Moulin et al.

WASTE AND BIOMASS VALORIZATION (2017)

Add to Collection

Article Polymer Science

Comparative Properties of Styrene-Butadiene Rubbers (SBR) Containing Pyrolytic Carbon Black, Conventional Carbon Black, and Organoclay

P. Berki et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2016)

Add to Collection

Review Engineering, Environmental

Pyrolysis of waste tyres: A review

Paul T. Williams

WASTE MANAGEMENT (2013)

Add to Collection

Article Engineering, Chemical

Inverse Gas Chromatography Investigation of Rubber Reinforcement by Modified Pyrolytic Carbon Black from Scrap Tires

Jie Zhou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.