☆ 4.6 Article

Enhanced Performance of Micro Deep Drawing through the Application of TiO2 Nanolubricant and Graphene Lubricants on SUS 301 Stainless Steel Foil

PROCESSES (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Lubrication properties of graphene under harsh working conditions

Bao Jin et al.

Summary: This review extensively explores and summarizes the lubrication properties of graphene materials under harsh working conditions, as well as its effect on the behavior of boundary tribofilm. The lubrication mechanisms of graphene are summarized, and the future prospects and challenges for its application as next-generation lubrication materials are discussed.

MATERIALS TODAY ADVANCES (2023)

Add to Collection

Article Multidisciplinary Sciences

Effect of TiO2 nanoparticles on the tribological properties of lubricating oil: an experimental investigation

Corina Birleanu et al.

Summary: Nano-lubricants have shown improved tribological properties in various applications. This study investigates the effects of TiO2 nanoparticles on the wear, friction, and anti-wear abilities of lubricating oil at different concentrations. The results demonstrate that surface-modified TiO2 nanoparticles can significantly enhance load-carrying capacity, reduce friction, and improve anti-wear properties of the additive oil.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and Tribological Properties of a Multilayer Graphene-Reinforced TiO2 Composite Nanolubricant Additive

Yu-kun Wei et al.

Summary: This study successfully synthesized a multilayer graphene-reinforced TiO2 composite nanolubricant additive (MGTC) using dielectric barrier discharge plasma-assisted ball milling. The 1.0wt% composite oil showed good friction reduction and wear resistance.

ACS OMEGA (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Topography-Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling

Tae-Sik Jang et al.

Summary: Orthopedic implants reinforced with titanium dioxide nanoparticles via dopamine-induced polymerization and coated with hydroxyapatite show enhanced mechanical strength and biocompatibility. PEEK with internal TiO2 reinforcement improves bone cell proliferation and differentiation, while the HA coating leads to increased osteoblast absorption. Micro-CT and histological analyses confirm new bone formation and high bone-to-implant contact ratio on the HA-coated PEEK structure reinforced with TiO2 nanoparticles.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

A study of influence of hydraulic pressure on micro-hydromechanical deep drawing considering size effects and surface roughness

Liang Luo et al.

Summary: Micro-hydromechanical deep drawing (MHDD) is a promising micro-manufacturing technology for batch fabrication of micro-metallic products, with size effects significantly affecting material properties and friction. This study investigates the combined influence of fluid pressure, surface roughness, and material inhomogeneity on blank through MHDD experiments and advanced FE simulation. Results show successful drawing of micro-cups with wrinkles occurring under high hydraulic pressures, indicating the importance of optimal hydraulic pressure considering size effects and tool geometry in MHDD.

WEAR (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Frictional Size Effect of Light-Weight Mg-Li Alloy in Micro Deep Drawing under Nano-Particle Lubrication Condition

Hamidreza Kamali et al.

MATERIALS TRANSACTIONS (2020)

Add to Collection

Article Engineering, Manufacturing

Investigation on tribological performance of CuO vegetable-oil based nanofluids for grinding operations

Mirsadegh Seyedzavvar et al.

ADVANCES IN MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium

Mingshuai Huo et al.

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Nanoscience & Nanotechnology

TiO2 Nanoparticle/Fluorinated Reduced Graphene Oxide Nanosheet Composites for Lubrication and Wear Resistance

Wenjie Zhao et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

The Performance of SiO2 and TiO2 Nanoparticles as Lubricant Additives in Sunflower Oil

Vicente Cortes et al.

LUBRICANTS (2020)

Add to Collection

Article Engineering, Mechanical

Enhancing the Tribological Behavior of Lubricating Oil by Adding TiO2, Graphene, and TiO2/Graphene Nanoparticles

Waleed Alghani et al.

TRIBOLOGY TRANSACTIONS (2019)

Add to Collection

Article Engineering, Mechanical

Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures

Hui Wu et al.

WEAR (2019)

Add to Collection

Article Automation & Control Systems

Effects of nano-particle lubrication on micro deep drawing of Mg-Li alloy

Hamidreza Kamali et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Glycerol-Mediated Facile Synthesis of Colored Titania Nanoparticles for Visible Light Photodegradation of Phenolic Compounds

Rab Nawaz et al.

NANOMATERIALS (2019)

Add to Collection

Article Automation & Control Systems

Synthesis and recent advances in tribological applications of graphene

Ashish K. Kasar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Mechanical

Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel

Hui Wu et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tribological Properties of Aluminum Nanoparticles as Additives in an Aqueous Glycerol Solution

Vu Nguyen-Anh Le et al.

APPLIED SCIENCES-BASEL (2017)

Add to Collection

Article Engineering, Manufacturing

Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel

Hui Wu et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Experimental and numerical study on micro deep drawing with aluminium-copper composite material

Fanghui Jia et al.

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Study of tribological properties of lubricating oil blend added with graphene nanoplatelets

Siti Safiyah Nor Azman et al.

JOURNAL OF MATERIALS RESEARCH (2016)

Add to Collection

Article Engineering, Mechanical

Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives

Mohamed Kamal Ahmed Ali et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Superlubric Sliding of Graphene Nanoflakes on Graphene

Xiaofeng Feng et al.

ACS NANO (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of surface morphology on friction of graphene on various substrates

Dae-Hyun Cho et al.

NANOSCALE (2013)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Tribological properties and lubricant mechanism of Nanoparticle in Engine Oil

M. Asrul et al.

INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Vapor Deposition-Grown Graphene: The Thinnest Solid Lubricant

Kwang-Seop Kim et al.

ACS NANO (2011)

Add to Collection

Article Chemistry, Physical

Tribological property of TiO2 nanolubricant on piston and cylinder surfaces

H. Chang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Effects of lubrication conditions on micro deep drawing

Feng Gong et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.