☆ 4.6 Article

Liquid-Liquid Two-Phase Flow and Size Prediction of Slug Droplets in Microchannels

PROCESSES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Experimental study on sub-regimes of air-water slug flow in a rectangular micro-channel

Hong-Cheol Shin et al.

Summary: This study investigates the stable and unstable slug flow in micro-channels through experiments and measurements, and identifies the fundamental characteristics of different types of slug flow. The analysis of pressure data reveals a correlation between pressure fluctuation and morphological characteristics of the slug flow.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Review Engineering, Chemical

Liquid film thickness of two-phase slug flows in capillary microchannels: A review paper

Amin Etminan et al.

Summary: This paper comprehensively reviews the hydrodynamics, flow patterns, and liquid film thickness of two-phase flows in mini- and microchannels, as well as correlations predicting liquid film thickness. The study indicates that the effects of cross-sectional area on flow patterns and characteristics have not been adequately investigated, particularly for rectangular cross-sectional areas with different aspect ratios.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Viscosity Ratio Influence on Liquid-Liquid Flow in a T-shaped Microchannel

Alexander V. Kovalev et al.

Summary: Experimental study shows that different viscosity ratios lead to different flow patterns of liquid-liquid flow in T-shaped microchannels, with negligible influence on the velocity and length of plug flow pattern. Despite significant interface deformations, the viscosity ratio has little impact on the plug length and velocity.

CHEMICAL ENGINEERING & TECHNOLOGY (2021)

Add to Collection

Article Thermodynamics

Experimental study on liquid-liquid two-phase flow patterns and plug hydrodynamics in a small channel

Changliang Wang et al.

Summary: The study experimentally investigated the flow patterns and plug hydrodynamics of liquid-liquid two-phase flow in a small circular channel, presenting a flow pattern map and plug length prediction correlation. It was found that the capillary number significantly affects the plug length prediction, and the change law of plug shape was studied.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Experimental Studies of Droplet Formation Process and Length for Liquid-Liquid Two-Phase Flows in a Microchannel

Li Lei et al.

Summary: The study experimentally investigated changes in droplet formation mechanism and length in a liquid-liquid two-phase system, finding that droplet length is influenced by continuous phase viscosity, volume flow rate, and capillary number. Different flow parameters lead to distinct droplet formation mechanisms and lengths in the system.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

Production of oil in water emulsions in microchannels at high throughput: Evaluation of emulsions in view of cosmetic, nutraceutical or pharmaceutical applications

Ralph Nehme et al.

Summary: This study examined the quality of emulsions produced through fast emulsification in a high-throughput microsystem, showing that the microsystem can serve as an interesting alternative for small-scale emulsion production.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Add to Collection

Review Engineering, Chemical

A Review on the Hydrodynamics of the Liquid-Liquid Two-Phase Flow in the Microchannels

Marwah Al-Azzawi et al.

Summary: Small and microchannels offer advantages in enhancing mass transfer and process safety, with various flow patterns observed when two immiscible liquids flow in these channels. Experimental and computational literature provide insights into parameters influencing flow patterns and pressure drop, with gaps and future research opportunities identified for further development in liquid-liquid two-phase flow in microchannels.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Review Engineering, Chemical

A Review on the Hydrodynamics of Taylor Flow in Microchannels: Experimental and Computational Studies

Amin Etminan et al.

Summary: Taylor flow is a strategy-oriented flow aiming to enhance momentum/heat/mass transfer rates, particularly suitable for gas-liquid and liquid-liquid two-phase systems in microchannels. Properly designed micro-structures are crucial for equipment dealing with transport phenomena.

PROCESSES (2021)

Add to Collection

Article Engineering, Chemical

Effect of fluid viscosities on the liquid-liquid slug flow and pressure drop in a rectangular microreactor

Haiyun Ma et al.

Summary: The hydrodynamics of liquid-liquid slug flow with various fluid systems were investigated to reveal the viscous effects of both phases. The study discussed the operation range, droplet formation, film thickness, and pressure drop of slug flow. Results showed the importance of inertia and viscous forces in flow pattern transition, leading to the adoption of a universal flow map and new empirical correlations for droplet formation and pressure drop.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Polymer Science

Non-Newtonian Droplet Generation in a Cross-Junction Microfluidic Channel

Maryam Fatehifar et al.

Summary: Enhancing the shear-thinning behavior by increasing polymer concentrations in the dispersed phase decreases droplet size and increases detachment time. The choice of a shear-dependent fluid results in decreased droplet size compared to Newtonian fluids, but increased detachment time due to higher apparent viscosity.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-viscosity liquid mixing in a slug-flow micromixer: a numerical study

Alireza Bordbar et al.

JOURNAL OF FLOW CHEMISTRY (2020)

Add to Collection

Article Engineering, Chemical

Experimental studies on droplet formation in a flow-focusing microchannel in the presence of surfactants

Evangelia Roumpea et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

Hydrodynamics and mass transfer characteristics of liquid-liquid slug flow in microchannels: The effects of temperature, fluid properties and channel size

Qi Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Multidisciplinary Sciences

Accounting for corner flow unifies the understanding of droplet formation in microfluidic channels

Piotr M. Korczyk et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Dynamic behavior and driving force model of droplet formation in a T-junction microchannel

Zhao Na et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Add to Collection

Review Nanoscience & Nanotechnology

A comprehensive review on liquid-liquid two-phase flow in microchannel: flow pattern and mass transfer

Jin-yuan Qian et al.

MICROFLUIDICS AND NANOFLUIDICS (2019)

Add to Collection

Article Engineering, Environmental

Dimensionless analysis on liquid-liquid flow patterns and scaling law on slug hydrodynamics in cross-junction microchannels

Zhen Cao et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Chemical

Breakup dynamics for droplet formation in shear-thinning fluids in a flow-focusing device

Wei Du et al.

CHEMICAL ENGINEERING SCIENCE (2018)

Add to Collection

Article Engineering, Chemical

Role of local geometry on droplet formation in axisymmetric microfluidics

Liangyu Wu et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Add to Collection

Article Engineering, Chemical

Effect of Channel Size on Liquid-Liquid Plug Flow in Small Channels

Dimitrios Tsaoulidis et al.

AICHE JOURNAL (2016)

Add to Collection

Article Engineering, Environmental

Flow patterns of immiscible liquid-liquid flow in a rectangular microchannel with T-junction

Anna A. Yagodnitsyna et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Engineering, Chemical

Breakup dynamics for droplet formation in a flow-focusing device: Rupture position of viscoelastic thread from matrix

Wei Du et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Time-resolved mixing and flow-field measurements during droplet formation in a flow-focusing junction

Odile Carrier et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2015)

Add to Collection

Article Engineering, Chemical

Droplet formation and breakup dynamics in microfluidic flow-focusing devices: From dripping to jetting

Taotao Fu et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Add to Collection

Article Mechanics

A review on numerical studies of slug flow hydrodynamics and heat transfer in microtubes and microchannels

V. Talimi et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Correlations of droplet formation in T-junction microfluidic devices: from squeezing to dripping

J. H. Xu et al.

MICROFLUIDICS AND NANOFLUIDICS (2008)

Add to Collection

Article Physics, Fluids & Plasmas

Experimental observations of the squeezing-to-dripping transition in T-shaped microfluidic junctions

Gordon F. Christopher et al.

PHYSICAL REVIEW E (2008)

Add to Collection

Article Mechanics

Capillary threads and viscous droplets in square microchannels

Thomas Cubaud et al.

PHYSICS OF FLUIDS (2008)

Add to Collection

Article Biochemical Research Methods

Formation of droplets and bubbles in a microfluidic T-junction - scaling and mechanism of break-up

P Garstecki et al.

LAB ON A CHIP (2006)

Add to Collection

Article Engineering, Chemical

Microfluidics: Basic issues, applications, and challenges

HA Stone et al.

AICHE JOURNAL (2001)

Add to Collection

Article Physics, Multidisciplinary

Dynamic pattern formation in a vesicle-generating microfluidic device

T Thorsen et al.

PHYSICAL REVIEW LETTERS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.