4.7 Article

High-Performance Neutral Zinc-Air Batteries Based on Hybrid Zinc/Carbon Nanotube Fiber Anodes

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

High-Density Atomic Fe-N4/C in Tubular, Biomass-Derived, Nitrogen-Rich Porous Carbon as Air-Electrodes for Flexible Zn-Air Batteries

Chuanlai Jiao et al.

Summary: Low-cost single-atom catalysts (SACs) supported on waste biomass carbon have been developed for oxygen reduction/evolution reactions (ORR/OER) to enhance the performance of metal-air batteries. The hierarchical porous structure and hollow tube morphology of Fe single atoms supported on biomass carbon play a critical role in boosting ORR/OER performance. The high-loading content of Fe single atoms and ultra-high N doping compensate for the insufficient OER performance, resulting in a promising zinc-air battery with high peak power density and stable discharge-charge voltage.

ADVANCED FUNCTIONAL MATERIALS (2023)

Article Chemistry, Multidisciplinary

pH-Triggered Molecular Switch Toward Texture-Regulated Zn Anode

Shao-Jian Zhang et al.

Summary: In this study, a dynamic Zn interface modulation based on the molecular switch strategy is utilized to solve the unstable Zn/electrolyte interface problem of Zn electrodes in aqueous media. This modulation is achieved by employing gamma-butyrolactone (GBL) in ZnCl2/H2O electrolyte. The dynamic molecular switch strategy enables high Zn reversibility and enhances the cycling performance of Zn||iodine batteries under high Zn depth of discharge (50%).

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Multidisciplinary

Solid-Adsorbed Polymer-Electrolyte Interphases for Stabilizing Metal Anodes in Aqueous Zn and Non-Aqueous Li Batteries

Shuo Jin et al.

Summary: Polymers can spontaneously adsorb onto high-energy substrates from liquid solutions, forming configurationally complex and durable phases with higher durability than expected. Controlling the physical, chemical, and transport properties of these interphases is crucial for advancing energy storage technology. In this study, the interfacial adsorption of oligomeric polyethylene glycol (PEG) chains in different liquid electrolytes was analyzed, revealing an optimum polymer molecular weight of approximately 400 Da for achieving the highest columbic efficiency in both Zn and Li deposition. These findings provide a simple and versatile approach for extending battery lifetime.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Multidisciplinary

Flexible Zinc-Air Batteries with Ampere-Hour Capacities and Wide-Temperature Adaptabilities

Xiongwei Zhong et al.

Summary: A novel hydrogel with high ionic conductivity and water uptake is developed, which improves the performance of flexible Zn-air batteries, resulting in high discharge capacities and cycle lives. The study provides new avenues for the application of flexible Zn-air batteries in wearable electronics.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

Functionalized Nanocomposite Gel Polymer Electrolyte with Strong Alkaline-Tolerance and High Zinc Anode Stability for Ultralong-Life Flexible Zinc-Air Batteries

Xiayue Fan et al.

Summary: Flexible aqueous zinc-air batteries (FAZABs) with quasi-solid-state gel polymer electrolytes (QSGPEs) containing sulfonate functionalized nanocomposites exhibit high ionic conductivity, alkali tolerance, and zinc anode stability. The FAZAB shows a long cycling life of 450 hours, making it suitable for powering wearable electronics.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

3D Cold-Trap Environment Printing for Long-Cycle Aqueous Zn-Ion Batteries

Hongyu Lu et al.

Summary: In this research, a novel 3D cold-trap environment printing (3DCEP) technology is proposed to fabricate the MXene and Zn-P (3DCEP-MXene/Zn-P) anode with highly ordered arrangement. The 3DCEP-MXene/Zn-P anode demonstrates improved cycling lifespan and coulombic efficiency due to the unique inhibition mechanism and physical confinement effects within the anode. Furthermore, when paired with MXene and Co doped MnHCF cathode via 3DCEP, the full battery shows high cyclic durability with a capacity retention of 95.7% after 1600 cycles.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

Agar-PVA/GO double network gel electrolyte for high performance flexible zinc-air batteries

Yue Yang et al.

Summary: Flexible zinc-air batteries (FZABs) have been widely studied due to their high energy density, low cost, and good safety. This paper presents a double network hydrogel as the electrolyte for FZABs, which consists of agar and polyvinyl alcohol microcrystals. The alkaline gel electrolyte exhibits high ionic conductivity and the neutral gel electrolyte shows better water retention, resulting in improved stability and longer cycle life for the assembled FZABs. Moreover, the FZABs assembled with this electrolyte demonstrate excellent flexibility and maintain their electrochemical performance under bending conditions.

MATERIALS TODAY CHEMISTRY (2023)

Article Chemistry, Multidisciplinary

Dynamic self-assembly of small molecules enables the spontaneous fabrication of hole conductors at perovskite/electrode interfaces for over 22% stable inverted perovskite solar cells

Wanhai Wang et al.

Summary: A dynamic self-assembly (DSA) method was developed to fabricate the bottom hole transport layers (HTLs) in perovskite solar cells (PSCs). This method enables simultaneous fabrication of the HTL and perovskite surface passivation, resulting in a champion PCE of 22.2% and remarkable long-term environmental stability of over 2750 h.

MATERIALS HORIZONS (2023)

Article Chemistry, Multidisciplinary

A Polarized Gel Electrolyte for Wide-Temperature Flexible Zinc-Air Batteries

Miaolun Jiao et al.

Summary: The development of flexible zinc-air batteries (FZABs) for wearable electronic devices has attracted attention. The optimization of gel electrolyte, a key component in FZABs, is crucial for compatibility with Zn anode and adaptability to severe climates. In this study, a polarized gel electrolyte of polyacrylamide-sodium citric (PAM-SC) is designed to suppress Zn dendrite growth and prevent water freezing and evaporating. The PAM-SC gel electrolyte exhibits high ionic conductivity and water retention, enabling FZABs to have a long cycling life at -40 degrees C.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Multidisciplinary

A Flexible and Transparent Zinc-Nanofiber Network Electrode for Wearable Electrochromic, Rechargeable Zn-Ion Battery

Soram Bobby Singh et al.

Summary: The flexible electrochromic Zn-ion battery (FE-ZiB) is a promising technology for future transparent wearable electronics, with a newly developed flexible and transparent zinc anode electrode. This technology demonstrates remarkable electrochemical performance, high optical contrast, and mechanical flexibility, as well as excellent electrochromic capability. These results highlight a new pathway for the development of transparent batteries for smart wearable electronic devices.

SMALL (2022)

Article Chemistry, Multidisciplinary

Hierarchically Nanostructured Solid-State Electrolyte for Flexible Rechargeable Zinc-Air Batteries

Mi Xu et al.

Summary: The construction of safe and environmentally-benign solid-state electrolytes (SSEs) for flexible zinc-air batteries is highly desirable. In this study, hierarchically nanostructured CCNF-PDIL SSEs with reinforced concrete architecture were successfully developed, showing good flexibility, mechanical robustness, and high ion conductivity. The resulting flexible solid-state zinc-air batteries exhibited superior performance compared to state-of-the-art batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Multidisciplinary

Dendrite Issues for Zinc Anodes in a Flexible Cell Configuration for Zinc-Based Wearable Energy-Storage Devices

Qing Li et al.

Summary: This study investigates the zinc accumulation issue on the folded and curved areas of flexible anodes and proposes a correlation between the bending radius and cell lifespan. The interface contact of hydrogel electrolytes is identified as a key factor affecting the cell lifespan when working in a bending mode. By conducting detailed analysis, it is found that water in salt (WIS) hydrogel with suitable chemistry, satisfactory mechanical properties, and high adhesivity demonstrates highly stable cell performance. This work provides a new perspective in zinc anode research for the development of flexible and wearable energy storage devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Chemistry, Physical

Gel polymer electrolyte with MXene to extend cycle lifespan of flexible and rechargeable Zinc-Air batteries

Zhaoyang Chen et al.

Summary: Flexible and rechargeable zinc-air batteries have a promising future in wearable electronic devices. A novel near-neutral gel polymer electrolyte composite has been designed, which can retain water and provide high ionic conductivity. The assembled batteries show a long cycle lifespan and excellent performance.

JOURNAL OF POWER SOURCES (2022)

Review Materials Science, Multidisciplinary

Integrated Bifunctional Oxygen Electrodes for Flexible Zinc-Air Batteries: From Electrode Designing to Wearable Energy Storage

Xuhuan Yang et al.

Summary: Flexible zinc-air batteries have emerged as promising portable power sources for future wearable electronics, showing significant advancements in energy density and cycling stability. Fiber/cable-type ZABs with unrivaled flexibility and knittability have enormous potential for wearable batteries and smart fabrics.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Article Chemistry, Multidisciplinary

Water-in-Salt Nonalkaline Gel Polymer Electrolytes Enable Flexible Zinc-Air Batteries with Ultra-Long Operating Time

Yanan Zhang et al.

Summary: A water-in-salt gel polymer electrolyte with a double network structure has been developed for solid-state zinc-air batteries. The electrolyte captures water from ambient air and achieves a dynamic balance of adsorption and desorption, leading to an ultra-long cycle time for the batteries. The gel polymer electrolyte also exhibits excellent adhesion property and can adapt to complex deformations, showing enormous potential for practical wearable applications.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

A Non-Alkaline Electrolyte for Electrically Rechargeable Zinc-Air Batteries with Long-Term Operation Stability in Ambient Air

Wei Sun et al.

Summary: This study demonstrates a non-alkaline zinc acetate electrolyte for long-term operation of electrically rechargeable zinc-air batteries without special cell engineering. The reversible formation/decomposition of zinc hydroxyacetate dihydrate is revealed using various electrochemical and analytical techniques. The carbon-based air cathode is modified to enhance its hydrophilic surface and improve energy efficiency. This work provides new insight into effective electrolyte design for long-term operation of zinc-air batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Multidisciplinary Sciences

A rechargeable zinc-air battery based on zinc peroxide chemistry

Wei Sun et al.

Summary: The study presents a zinc-O-2/zinc peroxide chemistry that operates through a 2e(-)/O-2 process in nonalkaline aqueous electrolytes, allowing highly reversible redox reactions in zinc-air batteries. This innovative ZnO2 chemistry, enabled by water-poor and zinc ion (Zn2+)-rich inner Helmholtz layer, shows superior reversibility and stability compared to alkaline zinc-air batteries.

SCIENCE (2021)

Article Materials Science, Multidisciplinary

Pt/Zn heterostructure as efficient air-electrocatalyst for long-life neutral Zn-air batteries

Yongyin Liang et al.

Summary: Researchers designed a new Pt/Zn NPs heterostructure to enhance the catalytic properties and stability of neutral Zn-air batteries, achieving remarkable experimental results.

SCIENCE CHINA-MATERIALS (2021)

Article Chemistry, Multidisciplinary

Surface-Preferred Crystal Plane for a Stable and Reversible Zinc Anode

Miao Zhou et al.

Summary: This study investigates a novel zinc anode with a surface-preferred (002) crystal plane, revealing its characteristics of fewer dendrites, no by-products, and weak hydrogen evolution. This leads to improved stability and reversibility of the battery system.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Reaction modifier system enable double-network hydrogel electrolyte for flexible zinc-air batteries with tolerance to extreme cold conditions

Yanan Zhang et al.

Summary: This study explores the use of zinc-air batteries for powering wearable electronic devices, and improves the anti-dehydration and anti-freezing properties of hydrogel electrolytes, enabling them to operate in extreme cold temperatures and provide power for electronic devices.

ENERGY STORAGE MATERIALS (2021)

Article Energy & Fuels

Ampere-hour-scale zinc-air pouch cells

Sambhaji S. Shinde et al.

Summary: Researchers report a cell-level design for all-solid-state zinc-air pouch cells with exceptionally high energy density and cycle lifespan.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

Engineering Polymer Glue towards 90% Zinc Utilization for 1000 Hours to Make High-Performance Zn-Ion Batteries

Yiding Jiao et al.

Summary: A new ion-selective polymer glue coated on the zinc anode allows for rapid zinc ion migration and uniform electrodeposition, resulting in a record-high zinc utilization of 90% for 1000 hours. When paired with a vanadium-based cathode, the zinc-ion battery exhibits an ultrahigh device-scale energy density of 228 Wh kg(-1), comparable to commercial lithium-ion batteries.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Nanoscience & Nanotechnology

Long-Shelf-Life Polymer Electrolyte Based on Tetraethylammonium Hydroxide for Flexible Zinc-Air Batteries

Ming Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Recent Progress in Electrically Rechargeable Zinc-Air Batteries

Jing Fu et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Flexible/Rechargeable Zn-Air Batteries Based on Multifunctional Heteronanomat Architecture

Donggue Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

An Ultraflexible Silicon-Oxygen Battery Fiber with High Energy Density

Ye Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

Flexible, Stretchable, and Rechargeable Fiber-Shaped Zinc-Air Battery Based on Cross-Stacked Carbon Nanotube Sheets

Yifan Xu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)