4.6 Article

Elucidating the Intrinsic Activity and Selectivity of Cu for Nitrate Electroreduction

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Enhancing Electrochemical Nitrate Reduction to Ammonia over Cu Nanosheets via Facet Tandem Catalysis

Yunfan Fu et al.

Summary: This study reports a high-performance Cu nanosheets catalyst that achieves a NH3 partial current density of 665 mA cm(-2) and NH3 yield rate of 1.41 mmol h(-1) cm(-2) in a flow cell at -0.59 V vs. reversible hydrogen electrode. The catalyst demonstrates a high stability for 700 h with an NH3 Faradaic efficiency of approximately 88% at 365 mA cm(-2). The high performance is attributed to the tandem interaction of Cu(100) and Cu(111) facets, promoting the crucial hydrogenation of *NO to *NOH for NH3 production.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Multidisciplinary

Co2Mo6S8 Catalyzes Nearly Exclusive Electrochemical Nitrate Conversion to Ammonia with Enzyme-like Activity

Bomin Li et al.

Summary: Electrocatalytic nitrate to ammonia conversion is crucial for sustainable energy and environment. The newly discovered active motifs based on the Chevrel phase Co2Mo6S8 exhibit high turnover frequency and ammonia selectivity. The catalyst achieves almost 100% ammonia conversion efficiency and high yield.

NANO LETTERS (2023)

Article Multidisciplinary Sciences

Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate

Xiaoxiong Wang et al.

Summary: This study presents a flow-through electrofiltration method using an electrified membrane and single-atom catalysts, which achieves high removal efficiency of ultra-low concentration nitrate and improves reduction activity and selectivity, offering a new solution for efficient water purification.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2023)

Article Chemistry, Physical

Combined Effects of Concentration, pH, and Polycrystalline Copper Surfaces on Electrocatalytic Nitrate-to-Ammonia Activity and Selectivity

Luisa Barrera et al.

Summary: This study investigates the effects of NO3- concentration and pH conditions on the electrochemical reduction to ammonia with Cu electrodes. The results show that reaction kinetics are pH- and concentration-dependent. The highest NH3 production efficiency is achieved at pH 14 and 1 M NaNO3, while the lowest is at pH 8. Surface roughness and effective double-layer capacitance play a greater role in 0.1 M NaNO3 solutions, while other factors are more significant for 1 M NaNO3 tests.

ACS CATALYSIS (2023)

Article Chemistry, Physical

Potential-Induced Synthesis and Structural Identification of Oxide-Derived Cu Electrocatalysts for Selective Nitrate Reduction to Ammonia

Na Zhou et al.

Summary: Developing effective electrocatalysts is essential for ammonia synthesis and addressing water pollution caused by nitrate. This study fabricates Cu/Cu2O as a suitable catalytic system starting from controllable crystal facets of Cu2O particles and investigates the relationship between the chemical state of copper and product selectivity in nitrate reduction reaction. The oxide-derived Cu-0 (OD-Cu) cube achieves a high ammonia Faradaic efficiency and productivity through enhanced nitrate adsorption and lower reaction barrier.

ACS CATALYSIS (2023)

Article Chemistry, Physical

Enhanced Nitrate Reduction Activity from Cu-Alloy Electrodes in an Alkaline Electrolyte

Akhil Paliwal et al.

Summary: The electrochemical nitrate reduction reaction (NO3-RR) has the advantages of restoring balance to the global nitrogen cycle and providing a less energy intensive pathway to ammonia production. This study investigated NO3-RR on Cu and Cu-alloyed electrodes (CuAg, CuSn, and CuPt) in an alkaline medium using voltammetric and spectroscopic measurements. The results showed that the CuAg catalyst had a lower overpotential for NO3-RR compared to the Cu-only catalyst. In situ surface enhanced Raman spectroscopy (SERS) analysis revealed that the dilute Ag in CuAg maintained a more reduced state of Cu(I) during NO3-RR, while the neat Cu surface was heavily oxidized. Similarly, CuSn alloy stabilized Cu(I) on the electrode surface and increased NO3-RR rates, while CuPt alloy did not yield a stabilized Cu(I) component, resulting in lower NO3-RR rates compared to neat Cu.

ACS CATALYSIS (2023)

Review Chemistry, Multidisciplinary

Achievements, Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Xiaoxuan Yang et al.

Summary: Unrestrained anthropogenic activities disrupt the global natural nitrogen cycle, leading to energy and environmental issues. Electrocatalytic nitrogen transformation offers a feasible and promising strategy for a sustainable nitrogen economy. By synergistically combining multiple nitrogen reactions, efficient renewable energy storage and conversion, nitrogen balance restoration, and environmental crisis remediation can be achieved.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Physical

Ultralow overpotential nitrate reduction to ammonia via a three-step relay mechanism

Shuhe Han et al.

Summary: Ammonia plays a crucial role in agriculture and carbon-free energy supply. A three-step relay mechanism is proposed to enhance the energy efficiency of electrocatalytic nitrate reduction to ammonia. By designing RuCo alloys as catalysts, high-performance ammonia production with low cost has been achieved.

NATURE CATALYSIS (2023)

Article Nanoscience & Nanotechnology

Efficient conversion of low-concentration nitrate sources into ammonia on a Ru-dispersed Cu nanowire electrocatalyst

Feng-Yang Chen et al.

Summary: The research team has efficiently converted nitrate, a common pollutant in wastewater and groundwater, into valuable ammonia products using a Ru-dispersed Cu nanowire catalyst through electrochemical methods. This sustainable approach not only treats wastewater but also generates ammonia, but current low catalytic activities pose challenges. However, the team has developed a high-performance catalyst that achieves over 99% nitrate conversion into ammonia and successfully obtains high purity NH4Cl solid and NH3 liquid products.

NATURE NANOTECHNOLOGY (2022)

Article Multidisciplinary Sciences

Splicing the active phases of copper/cobalt-based catalysts achieves high-rate tandem electroreduction of nitrate to ammonia

Wenhui He et al.

Summary: In this study, a design concept of tandem catalysts was proposed to achieve cascade conversion of waste nitrate to valuable ammonia using different transition metal phases. By transforming Cu-Co binary sulfides into Cu/CuOx and Co/CoO phases, efficient NH3 synthesis was achieved. The tandem catalyst system exhibited high Faradaic efficiency and NH3 yield rate in the presence of waste nitrate, and surpassed previous studies in terms of energy efficiency.

NATURE COMMUNICATIONS (2022)

Article Multidisciplinary Sciences

Breaking adsorption-energy scaling limitations of electrocatalytic nitrate reduction on intermetallic CuPd nanocubes by machine-learned insights

Qiang Gao et al.

Summary: Machine learning is a powerful tool for screening electrocatalytic materials. In this study, the authors integrated machine-learned physical insights with the synthesis of structurally ordered intermetallic nanocrystals to achieve efficient nitrate reduction to ammonia. They discovered that breaking adsorption-energy scaling relations through site-specific Pauli repulsion interactions allows for non-scaling behavior in ordered intermetallics. The authors also synthesized CuPd nanocubes with high performance for nitrate reduction to ammonia.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Physical

Highly Durable and Selective Fe- and Mo-Based Atomically Dispersed Electrocatalysts for Nitrate Reduction to Ammonia via Distinct and Synergized NO2- Pathways

Eamonn Murphy et al.

Summary: This article describes the application of bio-inspired atomically dispersed catalysts in the electrocatalytic nitrate reduction reaction. By integrating different metal sites, high selectivity and efficiency in ammonia synthesis were achieved.

ACS CATALYSIS (2022)

Article Chemistry, Physical

Identification of Active Sites for Ammonia Electrosynthesis on Ruthenium

Lin Hu et al.

Summary: In this study, Ru nanoparticles prepared by atomic layer deposition were found to exhibit size-dependent activity, with the highest specific activity observed on 3.8 nm particles and a 5-fold decrease in activity on 8.4 nm particles. Density functional theory calculations and free energy analysis identified the Ru D-5 step site on 4 nm particles as the active site for NRR on Ru.

ACS ENERGY LETTERS (2022)

Article Chemistry, Physical

Intrinsic Catalytic Activity of Carbon Nanotubes for Electrochemical Nitrate Reduction

Nia J. Harmon et al.

Summary: This study explores the use of carbon nanotubes as cost-effective catalysts for electrochemical nitrate reduction to ammonia. The researchers find that pristine multi-walled carbon nanotubes and single-walled carbon nanotubes exhibit high electrocatalytic activity, with the latter having even higher activity. Contrary to previous beliefs, introducing oxygen and nitrogen functional groups into multi-walled carbon nanotubes actually reduces their electrocatalytic activity. The study also reveals a positive correlation between total current density and Faradaic efficiency for ammonia formation, regardless of the type of carbon nanotube used.

ACS CATALYSIS (2022)

Review Water Resources

A comprehensive review on nitrate pollution and its remediation: conventional and recent approaches

Meena Choudhary et al.

Summary: This paper discusses the most commonly used methods for reducing nitrate concentration and improving water quality, including physical, chemical, and biological approaches, along with their advantages and disadvantages. The study finds that hybrid technology is the most effective in terms of cost, energy consumption, and nitrate removal.

SUSTAINABLE WATER RESOURCES MANAGEMENT (2022)

Article Nanoscience & Nanotechnology

Tuning the Oxidation State of Cu Electrodes for Selective Electrosynthesis of Ammonia from Nitrate

Jili Yuan et al.

Summary: Oxidic Cu formed on a Cu electrode can enhance its activity and selectivity for NO3- reduction to NH3, leading to improved catalytic performance. Research on oxidic Cu contributes to higher efficiency in nitrate recycling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Engineering, Environmental

Recent advances in non-noble metal electrocatalysts for nitrate reduction

Xi Zhang et al.

Summary: This review highlights the latest research progress in non-noble metal materials for electrochemical nitrate reduction, discussing mechanistic insights and strategies for improving performance.

CHEMICAL ENGINEERING JOURNAL (2021)

Editorial Material Chemistry, Physical

Electrocatalytic Nitrate Reduction for Sustainable Ammonia Production

Phebe H. van Langevelde et al.

Summary: Phebe van Langevelde, Ioannis Katsounaros, and Marc Koper are renowned researchers in the field of electrocatalysis and renewable energy. Their research interests span from fundamental aspects of electrocatalysis to physical electrochemistry and theoretical electrochemistry. They have received various national and international awards for their contributions to the field.

JOULE (2021)

Article Chemistry, Physical

Theoretical Insights into Superior Nitrate Reduction to Ammonia Performance of Copper Catalysts

Tao Hu et al.

Summary: This study investigated the catalytic performance of nitrate reduction to ammonia on copper crystal surfaces and found that Cu(100) and Cu(111) contribute most to NRA, with different optimal pH conditions. The research clarified the NRA pathway and highlighted the influence of pH on the catalytic processes.

ACS CATALYSIS (2021)

Article Chemistry, Physical

Ammonia and Nitric Acid Demands for Fertilizer Use in 2050

Jeonghoon Lim et al.

Summary: Access to nitrogen-based fertilizers is crucial for maximizing agricultural yield, but the production process contributes significantly to carbon emissions. The market size and value of ammonia and nitric acid will be heavily influenced by the growing global population and food demand over the next three decades. Developing carbon-free technologies for nitrogen and nitrate reduction to meet fertilizer manufacturing demands is essential to address the environmental impact of current production methods.

ACS ENERGY LETTERS (2021)

Article Multidisciplinary Sciences

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst

Zhen-Yu Wu et al.

Summary: The study reports a method for selectively converting nitrate to ammonia using an Fe single atom catalyst, which effectively prevents the formation of N-N coupling products while increasing the production rate of ammonia.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

First-principles mechanistic study on nitrate reduction reactions on copper surfaces: Effects of crystal facets and pH

Yian Wang et al.

Summary: This study investigates the effects of Cu crystal facets and pH on the electrocatalytic nitrate reduction reaction using a hybrid model. Results show that in acidic media, both Cu(100) and Cu(111) facets produce NH3 through the formation of specific intermediates. In alkaline media, Cu(100) prefers NH2OH formation, while Cu(111) favors NH3 formation. Overall, the (100) facet exhibits higher activity towards nitrate reduction, especially at higher pH levels.

JOURNAL OF CATALYSIS (2021)

Article Chemistry, Physical

Electrocatalytic Nitrate Reduction on Oxide-Derived Silver with Tunable Selectivity to Nitrite and Ammonia

Hengzhou Liu et al.

Summary: Research has discovered unique and highly efficient electrocatalytic activity of oxide-derived silver (OD-Ag) in converting NO3- to NO2-, with further reduction to NH4+ achieved by regulating the cathodic potential. The high selectivity and efficiency of OD-Ag in nitrate reduction products make it a promising candidate for denitrifying wastewater treatment and distributed nitrogen product production.

ACS CATALYSIS (2021)

Article Chemistry, Physical

Structure Sensitivity of Pd Facets for Enhanced Electrochemical Nitrate Reduction to Ammonia

Jeonghoon Lim et al.

Summary: The surface structure of Pd has a significant impact on the activity of nitrate and nitrite reduction, with cuboctahedral catalysts demonstrating the highest ammonia production in an alkaline electrolyte. This suggests that catalytic structural design plays a crucial role in enabling the selective reduction of nitrate to ammonia.

ACS CATALYSIS (2021)

Review Chemistry, Multidisciplinary

Nitrate electroreduction: mechanism insight, in situ characterization, performance evaluation, and challenges

Yuting Wang et al.

Summary: Excessive nitrate ions in the environment pose a significant threat to human health by disrupting the natural nitrogen cycle. Nitrate electroreduction, utilizing green electrons as reductants, shows promise due to its ability to operate under ambient conditions. Understanding the nitrate reaction mechanism is crucial for designing efficient electrocatalysts for selective nitrate reduction.

CHEMICAL SOCIETY REVIEWS (2021)

Article Chemistry, Multidisciplinary

A single-site iron catalyst with preoccupied active centers that achieves selective ammonia electrosynthesis from nitrate

Panpan Li et al.

Summary: The necessity for sustainable ammonia production using economic and environment-friendly technologies is increasing globally. This study presents an iron-based single-atom catalyst with uniform atomic dispersion on carbon, which exhibits high NH3 yield rate and faradaic efficiency. The catalyst's high selectivity for NH3 is attributed to the unique electronic structures of the individual Fe sites.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Engineering, Environmental

Electrochemical denitrification of highly contaminated actual nitrate wastewater by Ti/RuO2 anode and iron cathode

Rohit Chauhan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Unveiling the Activity Origin of a Copper-based Electrocatalyst for Selective Nitrate Reduction to Ammonia

Yuting Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

Enhanced Nitrate-to-Ammonia Activity on Copper-Nickel Alloys via Tuning of Intermediate Adsorption

Yuhang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Ammonia on a Titanium Electrode

Joshua M. McEnaney et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Alternative route for electrochemical ammonia synthesis by reduction of nitrate on copper nanosheets

Xianbiao Fu et al.

APPLIED MATERIALS TODAY (2020)

Article Multidisciplinary Sciences

Global patterns of nitrate storage in the vadose zone

M. J. Ascott et al.

NATURE COMMUNICATIONS (2017)

Article Electrochemistry

Electrocatalytic reduction of Nitrate on Copper single crystals in acidic and alkaline solutions

Elena Perez-Gallent et al.

ELECTROCHIMICA ACTA (2017)

Review Multidisciplinary Sciences

The Evolution and Future of Earth's Nitrogen Cycle

Donald E. Canfield et al.

SCIENCE (2010)

Article Electrochemistry

Study of the electroreduction of nitrate on copper in alkaline solution

David Reyter et al.

ELECTROCHIMICA ACTA (2008)

Article Chemistry, Physical

Oxidation of polycrystalline copper thin films at ambient conditions

Ilia Platzman et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

Review Multidisciplinary Sciences

Transformation of the nitrogen cycle: Recent trends, questions, and potential solutions

James N. Galloway et al.

SCIENCE (2008)

Article Chemistry, Multidisciplinary

Nitrate adsorption and reduction on Cu(100) in acidic solution

Sang-Eun Bae et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)