4.6 Article

Environmentally Viable Solvent Management in Perovskite Solar Cell Recycling Process

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Sustainable Green Process for Environmentally Viable Perovskite Solar Cells

Hui-Seon Kim et al.

Summary: This review comprehensively evaluates the potential hazards of materials used in perovskite solar cells (PSCs) from the perspective of environmental, health, and safety (EHS). It introduces recycling technologies and the development of green solvents to address the environmental issues and occupational risks in the development of PSCs.

ACS ENERGY LETTERS (2022)

Review Chemistry, Physical

Sustainable Pb Management in Perovskite Solar Cells toward Eco-Friendly Development

Huaiqing Luo et al.

Summary: This article discusses the issues related to Pb-based perovskite solar cells, such as the toxicity and leakage of lead, and their impact on the environment. It also proposes strategies to address these issues, including inhibiting Pb leakage and achieving Pb recycling and sustainable utilization.

ADVANCED ENERGY MATERIALS (2022)

Article Green & Sustainable Science & Technology

Assessing health and environmental impacts of solvents for producing perovskite solar cells

Rosario Vidal et al.

Summary: The study analyzes the human health toxicity and environmental implications of solvents used in perovskite solar cells, recommending dimethyl sulfoxide (DMSO) as the green choice for large-scale production.

NATURE SUSTAINABILITY (2021)

Article Multidisciplinary Sciences

Recycling lead and transparent conductors from perovskite solar modules

Bo Chen et al.

Summary: This study introduces a cost-effective and environmentally-friendly approach to recycle toxic lead and transparent conductors from end-of-life perovskite solar modules, achieving both environmental protection and economic benefits.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Iodine reduction for reproducible and high-performance perovskite solar cells and modules

Shangshang Chen et al.

Summary: Organic iodide perovskite precursors can be oxidized to I-2, impacting the performance and reproducibility of PSCs, but adding benzylhydrazine hydrochloride can effectively improve the situation. The stabilized efficiency of PSCs has been greatly enhanced after treatment.

SCIENCE ADVANCES (2021)

Article Chemistry, Multidisciplinary

Lead Stabilization and Iodine Recycling of Lead Halide Perovskite Solar Cells

Meng Ren et al.

Summary: Researchers have proposed a novel approach using commercial zeolite for lead stabilization and iodide recovery, achieving efficient resource utilization and recovery; this method not only stabilized the lead element but also efficiently recovered the iodide element.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Multidisciplinary

Life Cycle Assessment of Coated-Glass Recovery from Perovskite Solar Cells

Gonzalo Rodriguez-Garcia et al.

Summary: Sustainable end-of-life strategies for Perovskite solar cells (PSCs) require a focus on coated glass recovery, with reductions in environmental impact achievable through solvent recovery. Techniques involving thermal or physical processes must also decrease electricity and material use to become environmentally sustainable, in addition to solvent reuse.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Dialkylamines Driven Two-Step Recovery of NiOx/ITO Substrates for High-Reproducibility Recycling of Perovskite Solar Cells

Xiyuan Feng et al.

Summary: This study introduces a highly reliable two-step process to recycle cost-dominated ITO substrates coated with NiOx for PSCs by using dialkylamines. The champion recycled PSC achieved a higher conversion efficiency than the fresh one, and the regenerated devices performed superior to the fresh ones in the first 7 out of 10 recycles, providing a promising strategy for the recycling of PSCs.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Engineering, Environmental

Synthesis and adsorption properties of gelatin-conjugated hematite (α-Fe2O3) nanoparticles for lead removal from wastewater

Hee Jung Kim et al.

Summary: Gelatin-conjugated hematite nanoparticles prepared through solid-state phase transformation in the presence of phosphate show excellent performance in removing lead from wastewater, with high adsorption capacity and fast equilibrium adsorption kinetics. The magnetic property of the nanoparticles allows for selective collection using a permanent magnet, enabling high reusability.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Energy & Fuels

Defect compensation in formamidinium-caesium perovskites for highly efficient solar mini-modules with improved photostability

Yehao Deng et al.

Summary: The addition of excessive AX in formamidinium-caesium mixed-cation perovskites improves their photostability by compensating iodide vacancies and suppressing ion migration and defects generation during long-term illumination. This approach impedes the generation of hole traps and phase segregation, ultimately enhancing the stability and efficiency of the perovskite mini-modules.

NATURE ENERGY (2021)

Article Materials Science, Multidisciplinary

One-key-resetrecycling of whole perovskite solar cell

Kai Wang et al.

Summary: Material recycling from used perovskite solar cells for remaking new devices has been inefficient, but a bleacher solution is shown to disassemble cells into collectable parts with high material reuse rate. The remade device using recycled materials exhibits minimal efficiency drop, indicating a promising high-efficiency recycle-remake strategy for extending the life cycle of perovskite photovoltaics.

MATTER (2021)

Article Chemistry, Multidisciplinary

Close-loop recycling of perovskite solar cells through dissolution-recrystallization of perovskite by butylamine

Xiyuan Feng et al.

Summary: The study introduces a closed-loop recycling strategy to collect and regenerate the key materials needed for organic-inorganic lead halide perovskite solar cells, achieving a total recycling yield of lead exceeding 98.9%. The regenerated solar cells exhibit performance equivalent to fresh devices, with nearly 18% conversion efficiency, moving towards commercialization through effective recycling and refabrication approaches.

CELL REPORTS PHYSICAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Recovery of FTO coated glass substrate via environment-friendly facile recycling perovskite solar cells

M. S. Chowdhury et al.

Summary: Organic-inorganic perovskite solar cells have potential as large-scale and low-cost photovoltaic devices, but are susceptible to degradation due to lead content. Research on ideal methods for dealing with waste is crucial, with layer-by-layer extraction proving to be cost-effective and energy-effective.

RSC ADVANCES (2021)

Article Chemistry, Multidisciplinary

Sustainable solvent selection for the manufacture of methylammonium lead triiodide (MAPbI3) perovskite solar cells

Alexander James Doolin et al.

Summary: The study introduces a green solvent selection method that achieves deposition of perovskite films without DMF, leading to improved crystal quality and photovoltaic device efficiency.

GREEN CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Composite Encapsulation Enabled Superior Comprehensive Stability of Perovskite Solar Cells

Yifan Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Recycled Utilization of a Nanoporous Au Electrode for Reduced Fabrication Cost of Perovskite Solar Cells

Fengjiu Yang et al.

ADVANCED SCIENCE (2020)

Article Green & Sustainable Science & Technology

Sustainable lead management in halide perovskite solar cells

So Yeon Park et al.

NATURE SUSTAINABILITY (2020)

Article Chemistry, Multidisciplinary

Cyclic Utilization of Lead in Carbon-Based Perovskite Solar Cells

Sheng Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Energy & Fuels

In situ recycle of PbI2 as a step towards sustainable perovskite solar cells

Jie Xu et al.

PROGRESS IN PHOTOVOLTAICS (2017)

Article Multidisciplinary Sciences

One-Year stable perovskite solar cells by 2D/3D interface engineering

G. Grancini et al.

NATURE COMMUNICATIONS (2017)

Article Nanoscience & Nanotechnology

Recycling Perovskite Solar Cells To Avoid Lead Waste

Andreas Binek et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells

Konrad Domanski et al.

ACS NANO (2016)

Article Chemistry, Multidisciplinary

Proof-of-concept for facile perovskite solar cell recycling

Jeannette M. Kadro et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Multidisciplinary Sciences

Selective dissolution of halide perovskites as a step towards recycling solar cells

Byeong Jo Kim et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Multidisciplinary

A survey of solvent selection guides

Denis Prat et al.

GREEN CHEMISTRY (2014)