☆ 4.6 Article

3D Printing Enabled Highly Scalable Tubular Protonic Ceramic Fuel Cells

ACS ENERGY LETTERS (2023)

Related references

Note: Only part of the references are listed.

Review Energy & Fuels

Materials development and prospective for protonic ceramic fuel cells

Idris Temitope Bello et al.

Summary: Protonic ceramic fuel cells (PCFCs) are considered a potential and more efficient upgrade to conventional solid oxide fuel cells (SOFCs) due to their efficient operation at low and intermediate temperatures and nonfuel dilution at the anode during operation. This review provides a detailed exposition of material development strategies for major components of PCFCs and discusses credible science-backed recommendations for synthesis and fabrication of PCFCs materials. Additionally, the opportunities, challenges, and future directions for P-SOFCs are highlighted as well.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Slip Casting and Solid-State Reactive Sintering of BCZY(BaCexZr0.9-xY0.1O3-d)-NiO/BCZY Half-Cells

Sandrine Ricote et al.

Summary: Slip casting was used to prepare BCZY-NiO tubes with different diameters for use as hydrogen electrodes. The study found that the sintered BCZY layer adhered well to the support layer, and gas tightness was achieved through a sealing layer. Short tubes were found to have advantages in reactor design.

MEMBRANES (2022)

Add to Collection

Article Chemistry, Physical

A high-performance and durable direct NH3 tubular protonic ceramic fuel cell integrated with an internal catalyst layer

Yuxin Pan et al.

Summary: Nickel-based cermet anode-supported protonic ceramic fuel cells (PCFCs) have great potential for direct utilization of ammonia. This study reports embedded tubular PCFCs with a catalytic iron layer, which show improved performance and stability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Materials Science, Ceramics

The effect of dip-coating parameters on the thickness and uniformity of BCZYZ electrolyte layer on porous NiO-BCZYZ tubular supports

Berceste Beyribey et al.

Summary: The effect of dip-coating parameters on the coating thickness and uniformity of BCZYZ electrolyte on porous NiO-BCZYZ tubular supports was investigated. The calculated thicknesses of the electrolyte using different tube dimensions and weight gains were compared to the measured thicknesses. Optimal coating parameters were determined to achieve the minimum coating thickness and most uniform coating layer.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Characterisation of direct ammonia proton conducting tubular ceramic fuel cells for maritime applications

Kamil M. Nowicki et al.

Summary: Ammonia is being increasingly considered as a carrier for low carbon hydrogen, and this study demonstrates a low-carbon electrical power generation system based on a Protonic Ceramic Fuel Cell fueled by ammonia for port and maritime applications. The results show that the use of ammonia as fuel in a PCFC leads to high power density and relatively stable performance.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Fluorination inductive effect enables rapid bulk proton diffusion in BaCo0.4Fe0.4Zr0.1Y0.1O3-δ perovskite oxide for high-activity protonic ceramic fuel cell cathode

Rongzheng Ren et al.

Summary: This article proposes a strategy of fluorinating a perovskite cathode to promote proton transfer in protonic ceramic fuel cells (PCFCs). Experimental results show that this strategy effectively improves the PCFC output performance.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Electrokinetic Insights into the Triple Ionic and Electronic Conductivity of a Novel Nanocomposite Functional Material for Protonic Ceramic Fuel Cells

Idris Temitope Bello et al.

Summary: Triple ionic and electronic conductivity (TIEC) in cathode materials for protonic ceramic fuel cells (PCFCs) can be achieved by strategic development of multiphase cathode materials. The cubic-rhombohedral TIEC nanocomposite material designed in this study exhibits enhanced oxygen vacancy concentration and proton defects formation and transport, with low enthalpy of protonation and good cell performance stability.

SMALL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Perovskites for protonic ceramic fuel cells: a review

Jiafeng Cao et al.

Summary: Protonic ceramic fuel cells (PCFCs) are a promising energy technology that can efficiently convert chemical energy into electric power at reduced temperature. The practical use of PCFCs relies on efficient key cell materials, such as electrolyte and electrodes, that meet various requirements. In the past two decades, researchers have extensively explored complex oxides with the ABO(3) perovskite or related structure as key materials in PCFCs due to their flexible composition and versatile properties. The material engineering of perovskite oxides for PCFCs is an important focus of research, with a particular emphasis on compositional engineering to modify the lattice structure, defect structure, and ionic transportation behavior of perovskite oxides.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Fluorination inductive effect enables rapid bulk proton diffusion in BaCo0.4Fe0.4Zr0.1Y0.1O3-d perovskite oxide for high-activity protonic ceramic fuel cell cathode

Rongzheng Ren et al.

Summary: The study proposes a strategy of fluorinating a perovskite cathode to promote proton transfer and improve the output performance of PCFCs. Experimental results show reduced polarization resistance and enhanced PCFC output performance in the fluorinated BCFZY perovskite.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Physical

High-performance protonic ceramic fuel cells with a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ d cathode with palladium-rich interface coating

Jong Seon Park et al.

Summary: This study demonstrates the enhanced performance of protonic ceramic fuel cells (PCFCs) by adding palladium (Pd) interlayers, which successfully integrated between the BZCYYb and PBSCF layers with great long-term stability. The presence of Pd significantly improved current collection and reduced polarization impedance at the cathode-electrolyte interface, especially at low temperatures, promising for high-performance and robust PCFCs.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Fused filament fabrication for anode supported SOFC development: Towards advanced, scalable and cost-competitive energetic systems

C. Berges et al.

Summary: Solid Oxide Fuel Cells (SOFCs) are electrochemical devices that efficiently convert hydrogen or other fuels into energy and heat, offering a promising and environmentally friendly alternative to mitigate the effects of climate change. This study explores the use of additive manufacturing processes, specifically Fused Filament Fabrication (FFF), for anode supported SOFCs, highlighting the advantages in materials versatility and cost competitiveness.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Electrochemistry

High performance low-temperature tubular protonic ceramic fuel cells based on barium cerate-zirconate electrolyte

Dan Cao et al.

Summary: A tubular protonic ceramic fuel cell with BaCe0.7Zr0.1Y0.2O3-δ electrolyte was fabricated using the dip-coating technique. The cell showed good electrochemical performance, with output power even at a temperature as low as 200°C. Stability testing at 600°C showed that the cell's operating power density gradually stabilized over 30 hours of testing.

ELECTROCHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

High performance tubular protonic ceramic fuel cells via highly-scalable extrusion process

Liangzhu Zhu et al.

Summary: A method to fabricate long, anode-supported tubular protonic ceramic fuel cells (PCFCs) was reported and used to compare three high performance cathodes. Under 600 degrees C, BSCF cathode showed the lowest total resistance, BCFZY cathode had the lowest polarization resistance, while PBSCF cathode had the lowest overall performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Ceramics

Tubular solid oxide fuel cells fabricated by a novel freeze casting method

Dhruba Panthi et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Digital light processing-stereolithography three-dimensional printing of yttria-stabilized zirconia

Jinjin Zhang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Electrochemistry

Enhancement of Electrochemical Properties, Impedance and Resistances of Micro-tubular IT-SOFCs with Novel Asymmetric Structure Based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Proton Conducting Electrolyte

Y. Dong et al.

FUEL CELLS (2020)

Add to Collection

Article Chemistry, Physical

Inkjet Printing for Manufacturing Solid Oxide Fuel Cells

Gwon Deok Han et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Catalytic mixed conducting ceramic membrane reactors for methane conversion

Zhigang Wang et al.

REACTION CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

3D printing the next generation of enhanced solid oxide fuel and electrolysis cells

Arianna Pesce et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique

Luyang Wei et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Electrochemical properties of micro-tubular intermediate temperature solid oxide fuel cell with novel asymmetric structure based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ proton conducting electrolyte

Changcheng Chen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Analytical

High performance of anode supported BaZr0.1Ce0.7Y0.1Yb0.1O3-δ proton-conducting electrolyte micro-tubular cells with asymmetric structure for IT-SOFCs

Changcheng Chen et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Development of proton conducting fuel cells using nickel metal support

Sajad Vafaeenezhad et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Electrochemistry

High Performance Tubular Solid Oxide Fuel Cell Based on Ba0.5Sr0.5Ce0.6Zr0.2Gd0.1Y0.1O3-delta d Proton Conducting Electrolyte

Taghi Amiri et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Multidisciplinary Sciences

Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells

Chuancheng Duan et al.

NATURE (2018)

Add to Collection

Article Energy & Fuels

A 5 x 5 cm(2) protonic ceramic fuel cell with a power density of 1.3 W cm(-2) at 600 degrees C

Hyegsoon An et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Temperature dependence of partial conductivities of the BaZra0.7Ce0.2Y0.1O3-δ proton conductor

Gemma Heras-Juaristi et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Fabrication and characterization of a tubular ceramic fuel cell based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ proton conducting electrolyte

Amir Reza Hanifi et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

High-Performance 3D Printed Microtubular Solid Oxide Fuel Cells

Wenhua Huang et al.

ADVANCED MATERIALS TECHNOLOGIES (2017)

Add to Collection

Article Energy & Fuels

New high temperature sealing technique and permeability data for hollow fiber BSCF perovskite membranes

L. Di Felice et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2016)

Add to Collection

Article Chemistry, Physical

Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method

Abdullah Mat et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Development of anode-supported electrochemical cell based on proton-conductive Ba(Ce,Zr)O3 electrolyte

Toshiaki Yamaguchi et al.

SOLID STATE IONICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Binder Jetting: A Novel Solid Oxide Fuel-Cell Fabrication Process and Evaluation

Guha Manogharan et al.

JOM (2015)

Add to Collection

Article Chemistry, Physical

Fabrication of micro-tubular solid oxide fuel cells using sulfur-free polymer binder via a phase inversion method

Cong Ren et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Multidisciplinary Sciences

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Chuancheng Duan et al.

SCIENCE (2015)

Add to Collection

Article Materials Science, Ceramics

Fabrication of anode-supported tubular Ba(Zr0.1Ce0.7Y0.2)O3-δ cell for intermediate temperature solid oxide fuel cells

Sung Hwan Min et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Chemistry, Physical

Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes

Beibei He et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection

Article Electrochemistry

Fabrication and Performance of Tubular, Electrode-Supported BaCe0.2Zr0.7Y0.1O3-δ Fuel Cells

S. Robinson et al.

FUEL CELLS (2013)

Add to Collection

Article Chemistry, Physical

Aerosol Jet® Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy

Mary A. Sukeshini et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Anode-supported tubular SOFCs based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolyte fabricated by dip coating

Changcheng Chen et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Add to Collection

Article Chemistry, Physical

Ionic conductivity, sintering and thermal expansion behaviors of mixed ion conductor BaZr0.1Ce0.7Y0.1Yb0.1O3-δ prepared by ethylene diamine tetraacetic acid assisted glycine nitrate process

Xiaoliang Zhou et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Fabrication and characterization of anode-supported micro-tubular solid oxide fuel cell based on BaZr0.1Ce0.7Y0.1Yb0.1O3-δ electrolyte

Fei Zhao et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Micro-tubular solid oxide fuel cells with graded anodes fabricated with a phase inversion method

Ling Zhao et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Proceedings Paper Electrochemistry

Aerosol Jet® Printing and Microstructure of SOFC Electrolyte and Cathode Layers

A. M. Sukeshini et al.

SOLID OXIDE FUEL CELLS 12 (SOFC XII) (2011)

Add to Collection

Article Materials Science, Ceramics

Ink-Jet Printing: A Versatile Method for Multilayer Solid Oxide Fuel Cells Fabrication

Mary. A. Sukeshini et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Add to Collection

Article Multidisciplinary Sciences

Enhanced Sulfur and Coking Tolerance of a Mixed Ion Conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-δ

Lei Yang et al.

SCIENCE (2009)

Add to Collection

Article Chemistry, Physical

Thermal stress analysis of the planar SOFC bonded compliant seal design

K. S. Weil et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)

Add to Collection

Article Chemistry, Physical

Thermal stress analysis of a planar SOFC stack

Chih-Kuang Lin et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection

Article Chemistry, Physical

Design and fabrication of a 100 W anode supported micro-tubular SOFC stack

NM Sammes et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection

Article Engineering, Chemical

Ceramic-glass composite high temperature seals for dense ionic-conducting ceramic membranes

X Qi et al.

JOURNAL OF MEMBRANE SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.