☆ 4.6 Article

Effect of Nb Content on Phase Transformation and Comprehensive Properties of TiNb Alloy Coating

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Fracture behavior of laser powder bed fusion fabricated Ti41Nb via in-situ alloying

Sheng Huang et al.

Summary: This study investigated the microstructures and mechanical properties of in-situ alloyed Ti41Nb fabricated using laser powder bed fusion (LB-PBF). It was found that a small hatch spacing and fast scanning strategy could minimize porosity and unmelted Nb particle combination. The fabricated blocks had a mesostructure consisting of columnar grains and alternating Nb-poor regions (NPRs), along with extensive iso precipitates. The FCG rate was influenced by the NPR layers and the local slip systems, while the K IC exhibited significant anisotropy due to crack deflection by the NPR/matrix interfaces. Despite its low ductility, the mesostructure-induced toughening mechanism improved the fracture toughness of the alloy.

ACTA MATERIALIA (2022)

Add to Collection

Article Optics

Effect of non-equilibrium solid state phase transformation on welding temperature field during keyhole mode laser welding of Ti6Al4V alloy

J. Shui et al.

Summary: The research focused on the impact of non-equilibrium solid state phase transformation on the numerical simulation of welding temperature fields in keyhole mode laser welding of Ti6Al4V alloy. The simulation results showed that under non-equilibrium phase transformation conditions, the shape of temperature contours changed. After experimental validation, it was found that the simulation results of non-equilibrium phase transformation after one modification were reliable and satisfactory.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Physical

A review of microstructure and texture evolution during plastic deformation and heat treatment of β-Ti alloys

Aman Gupta et al.

Summary: This study reviews the microstructure and texture evolution of near beta, meta-stable beta, and stable beta-Ti alloys during plastic deformation and annealing treatment. Factors such as shear bands, martensite, dislocations, and precipitation significantly affect mechanical properties, while the deformation process influences microstructure and texture evolution. The activation of deformation mechanisms and presence of certain phases impact the ductility and strength of beta-Ti alloys, demonstrating the complexity of their mechanical behavior.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation of High-Temperature Constitutive Behavior of Ti555211 Titanium Alloy Subjected to Plastic Deformation in the Different Phase Regions

Yushe Gao et al.

Summary: The plastic deformation behavior and microstructural evolution of Ti555211 titanium alloy in different phase zones have been studied. Different deformation activation energies are observed in the dual-phase and single-phase zones, with the former having a higher energy for deformation. Moreover, the size of beta phase grains increases with decreasing strain rate in the dual-phase zone, while it increases significantly with increasing deformation temperature in the single-phase zone. Elongated grains are observed in the microstructures of the alloy subjected to plastic deformation in the single-phase region at higher strain rates. Additionally, it is more difficult for the alloy to induce plastic deformation in the dual-phase region than in the single-phase region.

METALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials

Sumit Bahl et al.

Summary: This review discusses the development process of metastable beta Ti alloys, including compositional design, thermo-mechanical processing, and material performance evaluation, focusing on the strategies for designing low modulus compositions and processing routes for achieving high strength to modulus ratio suitable for orthopedic applications. The effect of processing on performance metrics of these alloys in terms of fatigue resistance, tribological response, corrosion behavior, and biocompatibility is reviewed. Additionally, targeted research areas for the future are highlighted with encouraging strategies aimed at ensuring clinical application of beta Ti alloys.

INTERNATIONAL MATERIALS REVIEWS (2021)

Add to Collection

Article Chemistry, Physical

ZrC reinforced refractory-high-entropy-alloy coatings: compositional design, synthesis, interstitials, and microstructure evolution effects on wear, corrosion and oxidation behaviors

Xiaojuan Shang et al.

Summary: The microstructure and properties of the high-entropy alloy coatings can be significantly improved by adding C elements, leading to increased hardness and wear resistance. However, excessive C addition may be detrimental to the corrosion resistance of the coatings.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Alloy design by tailoring phase stability in commercial Ti alloys

G-H Zhao et al.

Summary: By developing new alloys and adjusting alloy compositions, researchers successfully optimized the mechanical characteristics of metallic alloys and achieved enhanced plasticity.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and lattice parameters of suction-cast Ti-Nb alloys in a wide range of Nb concentrations

A. Thoemmes et al.

Summary: The study on suction-cast Ti-Nb alloys shows that different Nb contents have a significant impact on the microstructure and phase transformations of the alloys, resulting in different phase compositions. The mechanical properties, such as Young's modulus, are directly influenced by the phase composition of the alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Periodic Micropillar-Patterned FTO/BiVO4 with Superior Light Absorption and Separation Efficiency for Efficient PEC Performance

Sucheol Ju et al.

Summary: By employing a combination of enhancing strategies, this study successfully fabricated a high-performance photoanode with significantly increased photocurrent density. The results indicate that using a simple and inexpensive fabrication process can effectively enhance efficiency.

SMALL (2021)

Add to Collection

Article Construction & Building Technology

Corrosion inhibition efficiency of compound nitrite with D-sodium gluconate on carbon steel in simulated concrete pore solution

Peizhen Xu et al.

Summary: The inhibitory performance and mechanism of compound nitrite with D-sodium gluconate on carbon steel in simulated concrete pore solution were studied. The results showed effective hindrance of pitting corrosion by the corrosion inhibitor, enhanced stability of the passive film on carbon steel, and competition with chloride ions for adsorption, weakening the adsorption of chloride ions on the steel surface.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion behavior and mechanism of selective laser melted Ti35Nb alloy produced using pre-alloyed and mixed powder in Hank's solution

P. Qin et al.

Summary: This study investigated the corrosion behavior and mechanism of SLM Ti35Nb separately processed with mixed powder and pre-alloyed powder in Hank's solution. Both samples showed similar corrosion behavior, but the pre-alloyed powder had more stable oxide films, while distinct oxide films formed on the TiNb and Nb regions in the mixed powder.

CORROSION SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

The effect of quench rate on the β-α martensitic transformation in Ti-Nb alloys

E. L. Pang et al.

Summary: Experimental results show that only the fastest quench rates (around 500 degrees C/s or higher) can form the α" phase in Ti-24Nb alloy, which exhibits a reversible thermally-induced beta-alpha '' transformation at low temperatures. Slightly slower quench rates lead to a beta+omega microstructure, without a thermally-induced beta-alpha '' transformation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Surface modification of titanium and titanium alloy by plasma electrolytic oxidation process for biomedical applications: A review

Pralhad Pesode et al.

Summary: Titanium and its alloys are commonly used in orthopedic and dental applications due to their excellent properties, but surface modification techniques like plasma electrolytic oxidation are needed to enhance their ability to connect with cells and bone for better clinical performance.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Biomaterials

Mechanical and biological properties of Ti-(0-25 wt%)Nb alloys for biomedical implants application

Yuqing Zhang et al.

REGENERATIVE BIOMATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Microstructure and corrosion behaviours of composite coatings on S355 offshore steel prepared by laser cladding combined with micro-arc oxidation

X. He et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A Review of Metastable Beta Titanium Alloys

R. Prakash Kolli et al.

METALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of heating rate and aging temperature on omega and alpha phase precipitation in Ti-35Nb alloy

Mariana G. de Mello et al.

MATERIALS CHARACTERIZATION (2018)

Add to Collection

Article Materials Science, Biomaterials

Microstructure, mechanical behavior and biocompatibility of powder metallurgy Nb-Ti-Ta alloys as biomedical material

Jue Liu et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Advances in metals and alloys for joint replacement

Lenka Kuncicka et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties

Swee Leong Sing et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Biomaterials

Characterization, corrosion behavior, cellular response and in vivo bone tissue compatibility of titanium-niobium alloy with low Young's modulus

Yanjie Bai et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys

Abdollah Bahador et al.

WELDING IN THE WORLD (2016)

Add to Collection

Article Chemistry, Physical

Microstructure, mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging

Mohsin Talib Mohammed et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Effect of Nb on the Microstructure, Mechanical Properties, Corrosion Behavior, and Cytotoxicity of Ti-Nb Alloys

Mi-Kyung Han et al.

MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate

Guang Jie Li et al.

MATERIALS CHARACTERIZATION (2014)

Add to Collection

Article Materials Science, Biomaterials

The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications

D. R. N. Correa et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

Add to Collection

Review Chemistry, Physical

New Developments of Ti-Based Alloys for Biomedical Applications

Yuhua Li et al.

MATERIALS (2014)

Add to Collection

Article Engineering, Biomedical

Hydrophilization of synthetic biodegradable polymer scaffolds for improved cell/tissue compatibility

Se Heang Oh et al.

BIOMEDICAL MATERIALS (2013)

Add to Collection

Article Engineering, Biomedical

Biocompatibility of Ti-alloys for long-term implantation

Mohamed Abdel-Hady Gepreel et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of the Zr and Mo contents on the electrochemical corrosion behavior of Ti22Nb alloy

S. Yang et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2013)

Add to Collection

Article Biochemistry & Molecular Biology

Osteoconductivity and Hydrophilicity of TiO2 Coatings on Ti Substrates Prepared by Different Oxidizing Processes

Dai Yamamoto et al.

BIOINORGANIC CHEMISTRY AND APPLICATIONS (2012)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Differentiation of human mesenchymal stem cells on niobium-doped fluorapatite glass-ceramics

Meenakshi Kushwaha et al.

DENTAL MATERIALS (2012)

Add to Collection

Article Materials Science, Biomaterials

Effects of alloying elements on the cytotoxic response of titanium alloys

Alessandra Cremasco et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Add to Collection

Article Materials Science, Biomaterials

Comparative study on the corrosion behavior of Ti-Nb and TMA alloys for dental application in various artificial solutions

Y. J. Bai et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Osteoconductivity of Anodized Titanium with Controlled Micron-Level Surface Roughness

Dai Yamamoto et al.

MATERIALS TRANSACTIONS (2011)

Add to Collection

Article Engineering, Biomedical

Mechanical, physical, and chemical characterization of Ti-35Nb-5Zr and Ti-35Nb-10Zr casting alloys

Ana Lucia Roselino Ribeiro et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)

Add to Collection

Article Engineering, Biomedical

Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation

S. J. Li et al.

ACTA BIOMATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion

B. Zheng et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)

Add to Collection

Article Engineering, Biomedical

Osteoblast adhesion and morphology on TiO2 depends on the competitive preadsorption of albumin and fibronectin

S. R. Sousa et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

Add to Collection

Article Electrochemistry

Corrosion behaviour of Ti-6Al-7Nb and Ti-6Al-4V ELI alloys in the simulated body fluid solution by electrochemical impedance spectroscopy

S. Tamilselvi et al.

ELECTROCHIMICA ACTA (2006)

Add to Collection

Article Engineering, Biomedical

How useful is SBF in predicting in vivo bone bioactivity?

T Kokubo et al.

BIOMATERIALS (2006)

Add to Collection

Article Engineering, Biomedical

Corrosion behavior of a low modulus beta-Ti-45%Nb alloy for use in medical implants

R Godley et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Cytotoxicity of commercial and novel binary titanium alloys with and without a surface-reaction layer

I Watanabe et al.

JOURNAL OF ORAL REHABILITATION (2004)

Add to Collection

Article Chemistry, Physical

Effect of replacement of V by Nb and Fe on the electrochemical and corrosion behavior of Ti-6Al-4V in simulated physiological environment

A Choubey et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2004)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of grain size and stability on ambient temperature tensile and creep deformation in metastable beta titanium alloys

D Doraiswamy et al.

ACTA MATERIALIA (2003)

Add to Collection

Article Engineering, Biomedical

Wear properties of Ti and Ti-6Al-7Nb castings for dental prostheses

D Iijima et al.

BIOMATERIALS (2003)

Add to Collection

Article Engineering, Biomedical

In vitro corrosion behaviour and osteoblast response of thermally oxidised Ti6Al4V alloy

MC Garcia-Alonso et al.

BIOMATERIALS (2003)

Add to Collection

Review Materials Science, Multidisciplinary

Recent research and development in titanium alloys for biomedical applications and healthcare goods

Mitsuo Niinomi

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2003)

Add to Collection

Article Engineering, Industrial

The manufacturing of hard tools from metallic powders by selective laser melting

F Abe et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.